| { |
| "version": 1, |
| "model_ec": ["P10_20"], |
| "registers": { |
| "EQ_QME_FIR": { |
| "instances": { |
| "0": "0x200E0000", |
| "1": "0x210E0000", |
| "2": "0x220E0000", |
| "3": "0x230E0000", |
| "4": "0x240E0000", |
| "5": "0x250E0000", |
| "6": "0x260E0000", |
| "7": "0x270E0000" |
| } |
| }, |
| "EQ_QME_FIR_MASK": { |
| "instances": { |
| "0": "0x200E0004", |
| "1": "0x210E0004", |
| "2": "0x220E0004", |
| "3": "0x230E0004", |
| "4": "0x240E0004", |
| "5": "0x250E0004", |
| "6": "0x260E0004", |
| "7": "0x270E0004" |
| } |
| }, |
| "EQ_QME_FIR_ACT0": { |
| "instances": { |
| "0": "0x200E0008", |
| "1": "0x210E0008", |
| "2": "0x220E0008", |
| "3": "0x230E0008", |
| "4": "0x240E0008", |
| "5": "0x250E0008", |
| "6": "0x260E0008", |
| "7": "0x270E0008" |
| } |
| }, |
| "EQ_QME_FIR_ACT1": { |
| "instances": { |
| "0": "0x200E000C", |
| "1": "0x210E000C", |
| "2": "0x220E000C", |
| "3": "0x230E000C", |
| "4": "0x240E000C", |
| "5": "0x250E000C", |
| "6": "0x260E000C", |
| "7": "0x270E000C" |
| } |
| } |
| }, |
| "isolation_nodes": { |
| "EQ_QME_FIR": { |
| "instances": [0, 1, 2, 3, 4, 5, 6, 7], |
| "rules": [ |
| { |
| "attn_type": ["CS"], |
| "node_inst": [0, 1, 2, 3, 4, 5, 6, 7], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_ACT0" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_ACT1" |
| } |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["RE"], |
| "node_inst": [0, 1, 2, 3, 4, 5, 6, 7], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_ACT0" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "EQ_QME_FIR_ACT1" |
| } |
| ] |
| } |
| } |
| ], |
| "bits": { |
| "0": { |
| "desc": "PPE halted due to an error" |
| }, |
| "1": { |
| "desc": "PPE asserted debug trigger" |
| }, |
| "2": { |
| "desc": "Spare trigger for testing or workarounds" |
| }, |
| "3": { |
| "desc": "PPE asserted a watchdog timeout condition" |
| }, |
| "4": { |
| "desc": "QME hardware detected its own timeout on the PCB Slave interface" |
| }, |
| "5": { |
| "desc": "Block Copy Engine or QME PPE direct access error from the Fabric" |
| }, |
| "6": { |
| "desc": "SRAM Uncorrectable Error" |
| }, |
| "7": { |
| "desc": "SRAM Correctable Error" |
| }, |
| "8": { |
| "desc": "Resonant Clock Table array Parity Error" |
| }, |
| "9": { |
| "desc": "PIG request of PCB interrupt before its previous interrupt completed" |
| }, |
| "10": { |
| "desc": "Scrub timer tick occurred when scrub is still pending" |
| }, |
| "11": { |
| "desc": "QME_LFIR_CTFS_ERR" |
| }, |
| "12": { |
| "desc": "QME_LFIR_CPMS_ERR" |
| }, |
| "13": { |
| "desc": "PGPE Heartbeat Lost from a hw deadman timer controlled by QHB" |
| }, |
| "14": { |
| "desc": "BCE forward progress error" |
| }, |
| "15": { |
| "desc": "Resclk TARGET_PSTATE Change Protocol Error" |
| }, |
| "16": { |
| "desc": "PCB Network or Endpoint Reset occurred when QME was not halted" |
| }, |
| "17": { |
| "desc": "Firmware cleared special wakeup request before SPECIAL_WKUP_DONE" |
| }, |
| "18": { |
| "desc": "A new special wakeup right after previous cleared" |
| }, |
| "19": { |
| "desc": "Core External Interrupt wakeup sources present but disabled by threads" |
| }, |
| "20": { |
| "desc": "Core External Interrupt present but the chiplet is deconfigured" |
| }, |
| "21": { |
| "desc": "Reserved" |
| }, |
| "22": { |
| "desc": "PB read cmd waited too long for lost data (hang)" |
| }, |
| "23": { |
| "desc": "PPE tried to write a protected addr as defined by the SWPR[n] register" |
| }, |
| "24": { |
| "desc": "DTC Sequencer read a UE from SRAM" |
| }, |
| "25": { |
| "desc": "Correctable error detected on incoming data for a PowerBus read" |
| }, |
| "26": { |
| "desc": "UE Detected on incoming data for a PowerBus read" |
| }, |
| "27": { |
| "desc": "SUE Detected on incoming data for a PowerBus read" |
| }, |
| "28": { |
| "desc": "PB Request address hit an invalid entry in the TOPOLOGY XLATE TABLE" |
| }, |
| "29": { |
| "desc": "Parity error detected on a powerbus tag" |
| }, |
| "30": { |
| "desc": "Code attempted to write the PIG register when the previous request was still pending" |
| }, |
| "31": { |
| "desc": "Local access error bit(s) set" |
| }, |
| "32": { |
| "desc": "CE detected on read to the SSA located in QME powerbus routing logic" |
| }, |
| "33": { |
| "desc": "UE detected on read to the SSA located in QME powerbus routing logic" |
| }, |
| "34": { |
| "desc": "Resonant clock CCFG parity error" |
| }, |
| "35": { |
| "desc": "spare" |
| } |
| } |
| } |
| } |
| } |