| #pragma once |
| |
| #include <stdint.h> |
| |
| namespace libhei |
| { |
| |
| class BitStringBuffer; |
| |
| //############################################################################## |
| // BitString class |
| //############################################################################## |
| |
| /** |
| * A BitString is general purpose class providing the ability to manipulate |
| * individual bits within an allocated section of contiguous memory. |
| * |
| * A BitString does not "own" the memory, it only accesses and manipulates the |
| * bits in the range specified. Users will need to ensure memory is allocated |
| * and deallocated appropriately. As an alternative, a BitStringBuffer is a |
| * BitString that will allocate and maintain its own memory. |
| * |
| * The length of a BitString is only limited by the amount of memory that |
| * contains the data buffer. |
| * |
| * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! IMPORTANT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| * |
| * - The bit positions are ordered 0 to n (left to right), where n is the bit |
| * length minus one. |
| * - The data stored in memory is assumed to be in big-endian byte format. |
| * |
| * So, for example: |
| * |
| * uint8_t a[2]; // 16 bits of memory |
| * BitString bs { 16, a }; // init BitString for a |
| * bs.setFieldRight(0, 16, 0x1122); // set all 16 bits to 0x1122 |
| * |
| * Results in: |
| * |
| * a[0] == bs.getFieldRight(0, 8) (i.e. 0x11) |
| * a[1] == bs.getFieldRight(8, 8) (i.e. 0x22) |
| * |
| * It is very important you do NOT do this: |
| * |
| * uint16_t x = 0x1122; // 16 bits of memory |
| * BitString bs { 16, &x }; // init BitString for x |
| * |
| * The results are undefined, or at least not portable. For example: |
| * |
| * Big-endian: |
| * x is stored in memory as |0x11|0x22|. |
| * Therefore, bs.getFieldRight(0, 8) returns 0x11. |
| * |
| * Little-endian: |
| * x is stored in memory as |0x22|0x11|. |
| * Therefore, bs.getFieldRight(0, 8) returns 0x22. |
| * |
| */ |
| class BitString |
| { |
| private: // constants |
| static const uint64_t UINT64_BIT_LEN; |
| static const uint64_t UINT8_BIT_LEN; |
| |
| public: // functions |
| /** |
| * @brief Constructor |
| * @param i_bitLen The number of bits in the bit string. |
| * @param i_bufAddr The starting address of the memory buffer. |
| * @param i_offset By default, position 0 will be the first bit of the |
| * buffer's start address. However, this parameter can be |
| * used to indicate that position 0 actually starts |
| * somewhere in the middle of the buffer. |
| * @pre Use getMinBytes() to calulate the minimum number of bytes needed |
| * to allocate sufficient memory space for this bit string. |
| */ |
| BitString(uint64_t i_bitLen, void* i_bufAddr, uint64_t i_offset = 0) : |
| iv_bitLen(i_bitLen), iv_bufAddr(i_bufAddr), iv_offset(i_offset) |
| {} |
| |
| /** @brief Destructor */ |
| virtual ~BitString() {} |
| |
| /** @return The number of bits in the bit string buffer. */ |
| uint64_t getBitLen() const |
| { |
| return iv_bitLen; |
| } |
| |
| /** @return The address of the bit string buffer. Note that this may |
| * return nullptr. */ |
| void* getBufAddr() const |
| { |
| return iv_bufAddr; |
| } |
| |
| /** |
| * @param i_bitLen The number of bits for a bit string. |
| * @param i_offset Optional starting position of the bit string within the |
| * memory buffer. |
| * @return The minimum number of bytes required to allocate sufficient |
| * memory space for a bit string. |
| */ |
| static uint64_t getMinBytes(uint64_t i_bitLen, uint64_t i_offset = 0) |
| { |
| return (i_bitLen + i_offset + UINT8_BIT_LEN - 1) / UINT8_BIT_LEN; |
| } |
| |
| /** |
| * @brief Returns a left-justified value of the given length from the bit |
| * string starting at the given position. |
| * @param i_pos The starting position of the target range. |
| * @param i_len The number of bits of the target range. |
| * @return The value of the field range specified (left-justified). |
| * @pre nullptr != getBufAddr() |
| * @pre 0 < i_len |
| * @pre i_len <= UINT64_BIT_LEN |
| * @pre i_pos + i_len <= getBitLen() |
| */ |
| uint64_t getFieldLeft(uint64_t i_pos, uint64_t i_len) const |
| { |
| return getFieldRight(i_pos, i_len) << (UINT64_BIT_LEN - i_len); |
| } |
| |
| /** |
| * @brief Returns a right-justified value of the given length from the bit |
| * string starting at the given position. |
| * @param i_pos The starting position of the target range. |
| * @param i_len The number of bits of the target range. |
| * @return The value of the field range specified (right-justified). |
| * @pre nullptr != getBufAddr() |
| * @pre 0 < i_len |
| * @pre i_len <= UINT64_BIT_LEN |
| * @pre i_pos + i_len <= getBitLen() |
| */ |
| uint64_t getFieldRight(uint64_t i_pos, uint64_t i_len) const; |
| |
| /** |
| * @brief Sets a left-justified value of the given length into the bit |
| * string starting at the given position. |
| * @param i_pos The starting position of the target range. |
| * @param i_len The number of bits of the target range. |
| * @param i_val The left-justified value to set. |
| * @pre nullptr != getBufAddr() |
| * @pre 0 < i_len |
| * @pre i_len <= UINT64_BIT_LEN |
| * @pre i_pos + i_len <= getBitLen() |
| */ |
| void setFieldLeft(uint64_t i_pos, uint64_t i_len, uint64_t i_val); |
| |
| /** |
| * @brief Sets a right-justified value of the given length into the bit |
| * string starting at the given position. |
| * @param i_pos The starting position of the target range. |
| * @param i_len The number of bits of the target range. |
| * @param i_val The right-justified value to set. |
| * @pre nullptr != getBufAddr() |
| * @pre 0 < i_len |
| * @pre i_len <= UINT64_BIT_LEN |
| * @pre i_pos + i_len <= getBitLen() |
| */ |
| void setFieldRight(uint64_t i_pos, uint64_t i_len, uint64_t i_val) |
| { |
| setFieldLeft(i_pos, i_len, i_val << (UINT64_BIT_LEN - i_len)); |
| } |
| |
| /** |
| * @param i_pos The target position. |
| * @return True if the bit at the given position is set(1), false otherwise. |
| * @pre i_pos < getBitLen(). |
| */ |
| bool isBitSet(uint64_t i_pos) const |
| { |
| return 0 != getFieldRight(i_pos, 1); |
| } |
| |
| /** |
| * @brief Sets the target position to 1. |
| * @param i_pos The target position. |
| * @pre i_pos < getBitLen(). |
| */ |
| void setBit(uint64_t i_pos) |
| { |
| setFieldRight(i_pos, 1, 1); |
| } |
| |
| /** @brief Sets the entire bit string to 1's. */ |
| void setAll() |
| { |
| setPattern(UINT64_MAX); |
| } |
| |
| /** |
| * @brief Sets the target position to 0. |
| * @param i_pos The target position. |
| * @pre i_pos < getBitLen(). |
| */ |
| void clearBit(uint64_t i_pos) |
| { |
| setFieldRight(i_pos, 1, 0); |
| } |
| |
| /** @brief Sets the entire bit string to 0's. */ |
| void clearAll() |
| { |
| setPattern(0); |
| } |
| |
| /** |
| * @brief Sets a range within the string based on the pattern and length |
| * provided. |
| * @param i_sPos Starting position of this string. |
| * @param i_sLen The length of the target range. |
| * @param i_pattern The pattern to set (right justified). |
| * @param i_pLen The length of the pattern. |
| * @pre nullptr != getBufAddr() |
| * @pre 0 < i_sLen |
| * @pre i_sPos + i_sLen <= getBitLen() |
| * @pre 0 < i_pLen <= UINT64_BIT_LEN |
| * @post The pattern is repeated/truncated as needed. |
| * |
| * Examples: i_sPos(0), i_sLen(10), i_pattern(0xA), i_pLen(4) |
| * Old String: 0000000000 |
| * New String: 1010101010 |
| * |
| * i_sPos(3), i_sLen(4), i_pattern(0x3), i_pLen(3) |
| * Old String: 0001001000 |
| * New String: 0000110000 |
| */ |
| void setPattern(uint64_t i_sPos, uint64_t i_sLen, uint64_t i_pattern, |
| uint64_t i_pLen); |
| |
| /** |
| * @brief Sets entire string based on the pattern and length provided. |
| * @param i_pattern The pattern to set (right justified). |
| * @param i_pLen The length of the pattern. |
| * @note See definition above for prerequisites. |
| * @post The entire string is filled with the pattern. |
| * @post The pattern is repeated/truncated as needed. |
| */ |
| void setPattern(uint64_t i_pattern, uint64_t i_pLen) |
| { |
| setPattern(0, getBitLen(), i_pattern, i_pLen); |
| } |
| |
| /** |
| * @brief Sets entire string based on the pattern provided. |
| * @param i_pattern The pattern to set (right justified). |
| * @note See definition above for prerequisites. |
| * @post The entire string is filled with the pattern. |
| * @post The pattern is repeated/truncated as needed. |
| */ |
| void setPattern(uint64_t i_pattern) |
| { |
| setPattern(i_pattern, sizeof(i_pattern) * 8); |
| } |
| |
| /** |
| * @brief Set bits in this string based on the given string. |
| * @param i_sStr The source string. |
| * @param i_sPos The starting position of the source string. |
| * @param i_sLen The number of bits to copy from the source string. |
| * @param i_dPos The starting position of the this string. |
| * @pre nullptr != getBufAddr() |
| * @pre nullptr != i_sStr.getBufAddr() |
| * @pre 0 < i_sLen |
| * @pre i_sPos + i_sLen <= i_sStr.getBitLen() |
| * @pre i_dPos < getBitLen() |
| * @post Source bits in given range are copied to this starting at i_dPos. |
| * @note If the length of the given string is greater than the length of |
| * this string, then the extra bits are ignored. |
| * @note If the length of the given string is less than the length of this |
| * string, then the extra bits in this string are not modified. |
| * @note This string and the source string may specify overlapping memory. |
| */ |
| void setString(const BitString& i_sStr, uint64_t i_sPos, uint64_t i_sLen, |
| uint64_t i_dPos = 0); |
| |
| /** |
| * @brief Set bits in this string based on the provided string. |
| * @param i_sStr The source string. |
| * @note This will try to copy as much of the source as possible to this |
| * string, starting with the first bit in each string. |
| * @note See the other definition of this function for details and |
| * restrictions. |
| */ |
| void setString(const BitString& i_sStr) |
| { |
| setString(i_sStr, 0, i_sStr.getBitLen()); |
| } |
| |
| /** |
| * @brief Masks (clears) any bits set in this string that correspond to bits |
| * set in the given string (this & ~mask). |
| * @param i_mask The mask string (right justified). |
| * @note If the length of the given string is greater than the length of |
| * this string, then the extra bits are ignored. |
| * @note If the length of the given string is less than the length of this |
| * string, then the extra bits in this string are not modified. |
| */ |
| void maskString(const BitString& i_mask); |
| |
| /** |
| * @param i_str The string to compare. |
| * @return True if the strings are equivalent, false otherwise. |
| * @pre Both strings must be of equal length and have same values to be |
| * equal. |
| */ |
| bool isEqual(const BitString& i_str) const; |
| |
| /** @return True if there are no bit set(1) in this bit string, false |
| * otherwise. */ |
| bool isZero() const; |
| |
| /** |
| * @param i_pos The starting position of the target range. |
| * @param i_len The length of the target range. |
| * @return The number of bits that are set(1) in given range of this string. |
| * @pre nullptr != getBufAddr() |
| * @pre i_pos + i_len <= getBitLen() |
| */ |
| uint64_t getSetCount(uint64_t i_pos, uint64_t i_len) const; |
| |
| /** @return The number of bits that are set(1) in this string. */ |
| uint64_t getSetCount() const |
| { |
| return getSetCount(0, getBitLen()); |
| } |
| |
| /** @brief Comparison operator. */ |
| bool operator==(const BitString& i_str) const |
| { |
| return isEqual(i_str); |
| } |
| |
| /** @brief Bitwise NOT operator. */ |
| BitStringBuffer operator~() const; |
| |
| /** @brief Bitwise AND operator. */ |
| BitStringBuffer operator&(const BitString& i_bs) const; |
| |
| /** @brief Bitwise OR operator. */ |
| BitStringBuffer operator|(const BitString& i_bs) const; |
| |
| /** @brief Right shift operator. */ |
| BitStringBuffer operator>>(uint64_t i_shift) const; |
| |
| /** @brief Left shift operator. */ |
| BitStringBuffer operator<<(uint64_t i_shift) const; |
| |
| /** |
| * @brief Explicitly disables copy from BitString. |
| * |
| * Prevents assigning a BitString& to a BitString, which would strip |
| * polymorphism. |
| */ |
| BitString(const BitString& i_bs) = delete; |
| |
| /** |
| * @brief Explicitly disables assignment from BitStringBuffer. |
| * |
| * Allowing this would be dangerous if the BitStringBuffer goes out of scope |
| * because the BitString would point to memory that is no longer in context. |
| */ |
| BitString& operator=(const BitStringBuffer& i_bsb) = delete; |
| |
| /** |
| * @brief Explicitly disables copy from BitStringBuffer. |
| * |
| * Allowing this would be dangerous if the BitStringBuffer goes out of scope |
| * because the BitString would point to memory that is no longer in context. |
| */ |
| BitString(const BitStringBuffer& i_bsb) = delete; |
| |
| protected: // functions |
| /** |
| * @param i_newBufAddr The starting address of the new bit string buffer. |
| * @pre Before calling this function, make sure you deallocate the old |
| * buffer to avoid memory leaks. |
| */ |
| void setBufAddr(void* i_newBufAddr) |
| { |
| iv_bufAddr = i_newBufAddr; |
| } |
| |
| /** @param i_newBitLen The new bit length of this bit string buffer. */ |
| void setBitLen(uint64_t i_newBitLen) |
| { |
| iv_bitLen = i_newBitLen; |
| } |
| |
| private: // functions |
| /** |
| * @brief Given a bit position within the bit string, this function returns |
| * the address that contains the bit position and the bit position |
| * relative to that address. |
| * @param o_relPos The returned relative position. |
| * @param i_absPos The inputted absolute position. |
| * @return The relative address. |
| * @pre nullptr != getBufAddr() |
| * @pre i_absPos < getBitLen() |
| */ |
| uint8_t* getRelativePosition(uint64_t& o_relPos, uint64_t i_absPos) const; |
| |
| private: |
| uint64_t iv_bitLen; ///< The bit length of this buffer. |
| void* iv_bufAddr; ///< The beginning address of this buffer. |
| uint64_t iv_offset; ///< Start position offset |
| }; |
| |
| //############################################################################## |
| // BitStringBuffer class |
| //############################################################################## |
| |
| /** A BitStringBuffer is a BitString that maintains its own buffer in memory. It |
| * guarantees that sufficient memory is allocated and deallocated in the |
| * constructor and destructor, respectively. In addition, the assignment |
| * operator will adjust the amount of memory needed, as necessary, for the |
| * assignment. */ |
| class BitStringBuffer : public BitString |
| { |
| public: // functions |
| /** |
| * @brief Constructor |
| * @param i_bitLen Number of bits in the string. |
| */ |
| explicit BitStringBuffer(uint64_t i_bitLen); |
| |
| /** @brief Destructor */ |
| ~BitStringBuffer(); |
| |
| /** @brief Copy constructor from BitString */ |
| BitStringBuffer(const BitString& i_bs); |
| |
| /** @brief Copy constructor from BitStringBuffer */ |
| BitStringBuffer(const BitStringBuffer& i_bsb); |
| |
| /** @brief Assignment from BitString */ |
| BitStringBuffer& operator=(const BitString& i_bs); |
| |
| /** @brief Assignment from BitStringBuffer */ |
| BitStringBuffer& operator=(const BitStringBuffer& i_bsb); |
| |
| private: // functions |
| /** @brief Deallocates the old buffer, if needed, and initializes the new |
| * buffer. */ |
| void initBuffer(); |
| }; |
| |
| } // end namespace libhei |