| { |
| "version": 1, |
| "model_ec": ["ODYSSEY_10"], |
| "registers": { |
| "SRQ_FIR": { |
| "instances": { |
| "0": "0x08011000" |
| } |
| }, |
| "SRQ_FIR_MASK": { |
| "instances": { |
| "0": "0x08011002" |
| } |
| }, |
| "SRQ_FIR_CFG_CHIP_CS": { |
| "instances": { |
| "0": "0x08011004" |
| } |
| }, |
| "SRQ_FIR_CFG_RECOV": { |
| "instances": { |
| "0": "0x08011005" |
| } |
| }, |
| "SRQ_FIR_CFG_SP_ATTN": { |
| "instances": { |
| "0": "0x08011006" |
| } |
| }, |
| "SRQ_FIR_CFG_UNIT_CS": { |
| "instances": { |
| "0": "0x08011007" |
| } |
| }, |
| "SRQ_FIR_WOF": { |
| "instances": { |
| "0": "0x08011008" |
| } |
| }, |
| "SRQ_ERR_RPT": { |
| "instances": { |
| "0": "0x0801101C" |
| } |
| }, |
| "MBXLT0": { |
| "instances": { |
| "0": "0x08011012" |
| } |
| }, |
| "MBXLT1": { |
| "instances": { |
| "0": "0x08011013" |
| } |
| }, |
| "MBXLT2": { |
| "instances": { |
| "0": "0x08011014" |
| } |
| }, |
| "MBXLT3": { |
| "instances": { |
| "0": "0x08011021" |
| } |
| }, |
| "WESR": { |
| "instances": { |
| "0": "0x08011C06" |
| } |
| }, |
| "SRQ_ERR_RPT_HOLD": { |
| "instances": { |
| "0": "0x08011C07" |
| } |
| } |
| }, |
| "isolation_nodes": { |
| "SRQ_FIR": { |
| "instances": [0], |
| "rules": [ |
| { |
| "attn_type": ["CHIP_CS"], |
| "node_inst": [0], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_CFG_CHIP_CS" |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["RECOV"], |
| "node_inst": [0], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_CFG_RECOV" |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["SP_ATTN"], |
| "node_inst": [0], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_CFG_SP_ATTN" |
| } |
| ] |
| } |
| }, |
| { |
| "attn_type": ["UNIT_CS"], |
| "node_inst": [0], |
| "expr": { |
| "expr_type": "and", |
| "exprs": [ |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR" |
| }, |
| { |
| "expr_type": "not", |
| "expr": { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_MASK" |
| } |
| }, |
| { |
| "expr_type": "reg", |
| "reg_name": "SRQ_FIR_CFG_UNIT_CS" |
| } |
| ] |
| } |
| } |
| ], |
| "bits": { |
| "0": { |
| "desc": "Internal parity error" |
| }, |
| "1": { |
| "desc": "SRQ nonrecoverable parity error" |
| }, |
| "2": { |
| "desc": "refresh overrun port0" |
| }, |
| "3": { |
| "desc": "WAT error" |
| }, |
| "4": { |
| "desc": "RCD parity error port0" |
| }, |
| "5": { |
| "desc": "MCB control logic Error in NCF" |
| }, |
| "6": { |
| "desc": "Emergency throttle engaged" |
| }, |
| "7": { |
| "desc": "DSM errors port0" |
| }, |
| "8": { |
| "desc": "event_n was active on the DDR interface port0" |
| }, |
| "9": { |
| "desc": "WRQ or RRQ is in a hung state port0" |
| }, |
| "10": { |
| "desc": "state machine one hot error port0" |
| }, |
| "11": { |
| "desc": "ROQ errors port0" |
| }, |
| "12": { |
| "desc": "Address parity error seen internal to sequencer on read or write command port0" |
| }, |
| "13": { |
| "desc": "port0 has failed due to a persistent retry" |
| }, |
| "14": { |
| "desc": "informational register parity error" |
| }, |
| "15": { |
| "desc": "soft error reported from error report register" |
| }, |
| "16": { |
| "desc": "WDF unrecoverable mainline error" |
| }, |
| "17": { |
| "desc": "WDF mmio error" |
| }, |
| "18": { |
| "desc": "WDF array UE on mainline operations (SUE put in mem)" |
| }, |
| "19": { |
| "desc": "WDF mainline dataflow error (SUE not reliably put in mem)" |
| }, |
| "20": { |
| "desc": "WDF scom register parity error, affecting mainline config" |
| }, |
| "21": { |
| "desc": "WDF scom register parity error, affecting scom ops only" |
| }, |
| "22": { |
| "desc": "WDF SCOM fsm parity error" |
| }, |
| "23": { |
| "desc": "WDF write buffer array CE" |
| }, |
| "24": { |
| "desc": "refresh management CE port0" |
| }, |
| "25": { |
| "desc": "refresh management RAA counter UE port0" |
| }, |
| "26": { |
| "desc": "NCF fifo error port0" |
| }, |
| "27": { |
| "desc": "NCF fifo error port1" |
| }, |
| "28": { |
| "desc": "memcntl cmd xstop" |
| }, |
| "29": { |
| "desc": "SRQ recoverable parity error" |
| }, |
| "30": { |
| "desc": "DFI error port0" |
| }, |
| "31": { |
| "desc": "xlat addr error port0" |
| }, |
| "32": { |
| "desc": "refresh overrun port1" |
| }, |
| "33": { |
| "desc": "RCD parity error port1" |
| }, |
| "34": { |
| "desc": "DFI error port1" |
| }, |
| "35": { |
| "desc": "event_n was active on the DDR interface port1" |
| }, |
| "36": { |
| "desc": "WRQ or RRQ is in a hung state port1" |
| }, |
| "37": { |
| "desc": "state machine one hot error port1" |
| }, |
| "38": { |
| "desc": "ROQ errors port1" |
| }, |
| "39": { |
| "desc": "Address parity error seen internal to sequencer on read or write command port1" |
| }, |
| "40": { |
| "desc": "port1 has failed due to a persistent retry" |
| }, |
| "41": { |
| "desc": "refresh management CE port1" |
| }, |
| "42": { |
| "desc": "refresh management RAA counter UE port1" |
| }, |
| "43": { |
| "desc": "xlat addr error port1" |
| }, |
| "44": { |
| "desc": "check on ccs in progress bit" |
| }, |
| "45": { |
| "desc": "DSM errors port1" |
| } |
| }, |
| "capture_groups": [ |
| { |
| "group_name": "SRQ_FIR", |
| "group_inst": { |
| "0": 0 |
| } |
| } |
| ] |
| } |
| }, |
| "capture_groups": { |
| "SRQ_FIR": [ |
| { |
| "reg_name": "SRQ_ERR_RPT", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "MBXLT0", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "MBXLT1", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "MBXLT2", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "MBXLT3", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "WESR", |
| "reg_inst": { |
| "0": 0 |
| } |
| }, |
| { |
| "reg_name": "SRQ_ERR_RPT_HOLD", |
| "reg_inst": { |
| "0": 0 |
| } |
| } |
| ] |
| } |
| } |