blob: ab021b50d50554e4ea0fb89323c6e31b60130f8f [file] [log] [blame]
#!/usr/bin/env perl
use warnings;
use strict;
use Data::Dumper;
use Getopt::Long qw(:config no_ignore_case);
use File::Path qw(make_path);
use XML::Simple qw(:strict);
# Pull in from the lib directory
use FindBin qw($RealBin);
use FindBin qw($RealScript);
use lib "$RealBin/lib";
use BitRange;
#-------------------------------------------------------------------------------
# Global Variables
#-------------------------------------------------------------------------------
# Supported file versions and their values.
my $FILE_VERSION =
{
VER_01 => 0x01,
};
# This is a map of all currently supported models/ECs and their IDs.
my $SUPPORTED_MODEL_EC =
{
EXPLORER_11 => 0x60D20011, # Explorer Chip DD1.0
EXPLORER_20 => 0x60D20020, # Explorer Chip DD1.0
P10_10 => 0x20DA0010, # P10 Chip DD1.0
P10_20 => 0x20DA0020, # P10 Chip DD2.0
};
# All models/ECs that may exist in the XML, but no longer needs to be built.
# This is useful for build optimization and also help prevent build breaks when
# the XML still exists, but not needed anymore.
my $DEPRECATED_MODEL_EC = [];
# Supported register types and their values.
my $REGISTER_TYPE =
{
SCOM => { id => 0x01, addr_size => 4, reg_size => 8 },
IDSCOM => { id => 0x02, addr_size => 8, reg_size => 8 },
};
# Supported attention types and their values.
my $ATTN_TYPE =
{
CS => 1, # System checkstop hardware attention
UCS => 2, # Unit checkstop hardware attention
RE => 3, # Recoverable hardware attention
SPA => 4, # SW or HW event requiring action by the service processor FW
HA => 5, # SW or HW event requiring action by the host FW
};
#-------------------------------------------------------------------------------
# Help function
#-------------------------------------------------------------------------------
sub help()
{
print <<EOF;
Usage: $RealScript -h
$RealScript -i <input_dir> -o <output_dir>
Builds Chip Data Binary files from the input Chip Data XML.
Options:
-h, --help Prints this menu.
-i, --input Directory containing the Chip Data XML files.
-o, --output Directory that will contain the Chip Data Binary files.
EOF
exit;
}
#-------------------------------------------------------------------------------
# Input
#-------------------------------------------------------------------------------
help() unless @ARGV; # print help if no arguments
# Get options
my ( $help, $src_dir, $dest_dir );
help() unless GetOptions( 'h|help' => \$help,
'i|input=s' => \$src_dir,
'o|output=s' => \$dest_dir );
help() if @ARGV; # print usage if there are extra arguments
# -h,--help
help() if ( $help );
# -i,--input
die "ERROR> Option -i required." unless ( defined $src_dir );
die "ERROR> '$src_dir' is not a directory" unless ( -d $src_dir );
# -o,--output
die "ERROR> Option -o required." unless ( defined $dest_dir );
make_path( $dest_dir, {error => \my $err} );
if ( @{$err} )
{
my ( $file, $message ) = %{shift @{$err}};
die "ERROR> $message: $file\n";
}
#-------------------------------------------------------------------------------
# Prototypes
#-------------------------------------------------------------------------------
sub importXML($);
sub normalizeXML($);
sub buildBinary($$);
#-------------------------------------------------------------------------------
# Main
#-------------------------------------------------------------------------------
# Validate and import the XML.
my $chip_data_xml = importXML( $src_dir );
# There are some fields in the XML that are shorthand and need to be expanded
# before building the binary files.
my $normalized_data = normalizeXML( $chip_data_xml );
# The XML should now be in a format to start building the binary files.
buildBinary( $dest_dir, $normalized_data );
#-------------------------------------------------------------------------------
# Helper functions
#-------------------------------------------------------------------------------
sub FAIL($) { die( "ERROR> " . shift @_ ); }
#-------------------------------------------------------------------------------
# Import functions
#-------------------------------------------------------------------------------
# For each supported XML file in the given directory:
# - Ensures the XML is well-formed.
# - Ensures the XML validates against the schema.
# - Imports the XML into Perl data structures.
sub importXML($)
{
my ( $dir ) = @_;
my $data = {};
# Get a list of all the XML files.
opendir DIR, $dir or die "Couldn't open dir '$dir': $!";
my @files = grep { /^.+\.xml$/ } readdir DIR;
closedir DIR;
# Iterate each supported file type.
for my $type ( "chip", "node" )
{
for my $file ( grep { /^$type\_.+\.xml$/ } @files )
{
my $path = "$dir/$file";
# Ensure the XML is well-formed and validates against the schema.
my $out = `xmllint --noout --schema $RealBin/$type.xsd $path 2>&1`;
die "$out\nRAS XML validation failed on $file" if ( 0 != $? );
# Import the XML.
my $xml = XMLin( $path, KeyAttr => {}, ForceArray => 1 );
# Add the file path to the XML for error output.
$xml->{path} = $path;
# Push each file's data to a list for each file type.
push @{$data->{$type}}, $xml;
}
}
return $data;
}
#-------------------------------------------------------------------------------
# Normalize functions
#-------------------------------------------------------------------------------
# Takes a string of models/ECs separated by ',' and returns a list of supported
# models/ECs. See $SUPPORTED_MODEL_EC and $DEPRECATED_MODEL_EC.
sub __expandModelEc($)
{
my ( $str ) = @_;
my @list = split(/,/, $str);
# Remove any deprecated models/ECs.
for my $d ( @{$DEPRECATED_MODEL_EC} )
{
@list = grep { $d ne $_ } @list;
}
# Validate the remaining models/ECs.
for my $m ( @list )
{
unless ( defined $SUPPORTED_MODEL_EC->{$m} )
{
FAIL("Unsupported model/EC: $m");
}
}
return @list;
}
#-------------------------------------------------------------------------------
sub __getInstRange($)
{
my ( $insts ) = @_;
my $list = [];
for ( @{$insts} ) { push @{$list}, $_->{reg_inst}; }
@{$list} = sort @{$list}; # Sort the list just in case.
return BitRange::compress($list);
}
sub __getReg($$$$)
{
my ( $inst_in, $reg_type, $name, $addr_mod ) = @_;
my $inst_out = [];
for ( @{$inst_in} )
{
my $addr = "";
if ( "SCOM" eq $reg_type )
{
$addr = sprintf( "0x%08x", hex($_->{addr}) + $addr_mod );
}
elsif ( "IDSCOM" eq $reg_type )
{
# TODO: Need a portable way of handling 64-bit numbers.
FAIL("IDSCOM address currently not supported");
}
else
{
FAIL("Unsupported register type for node: $name");
}
push @{$inst_out}, { reg_inst => $_->{reg_inst}, addr => $addr };
}
return { name => $name, instance => $inst_out };
}
sub __getExpr($$)
{
my ( $name, $config ) = @_;
# Get the register expression.
my $expr = { type => 'reg', value1 => $name };
if ( '0' eq $config )
{
# Take the NOT of the register expression.
$expr = { type => 'not', expr => [ $expr ] };
}
return $expr;
}
sub __getAct($$$$)
{
my ( $fir, $range, $type, $config ) = @_;
FAIL("Invalid action config: $config") unless ( $config =~ /^[01]{2,3}$/ );
my @c = split( //, $config );
my $e = [];
push( @{$e}, __getExpr("${fir}", '1' ) );
push( @{$e}, __getExpr("${fir}_MASK", '0' ) );
push( @{$e}, __getExpr("${fir}_ACT0", shift @c) );
push( @{$e}, __getExpr("${fir}_ACT1", shift @c) );
push( @{$e}, __getExpr("${fir}_ACT2", shift @c) ) if ( 0 < scalar @c );
return { node_inst => $range, attn_type => $type,
expr => [ { type => 'and', expr => $e } ] };
}
#-------------------------------------------------------------------------------
sub __normalizeLocalFir($)
{
my ( $node ) = @_;
return unless ( defined $node->{local_fir} );
# Note that the isolator will implicitly add all register referenced by the
# rules to the capture group. To reduce redundancy and overall file size, we
# won't add these registers to the capture group.
$node->{register} = [] unless ( defined $node->{register} );
$node->{rule} = [] unless ( defined $node->{rule} );
for my $l ( @{$node->{local_fir}} )
{
my $n = $l->{name};
my $i = $l->{instance};
my $t = $node->{reg_type};
my $inst_range = __getInstRange($i);
my $r = [];
push @{$r}, __getReg($i, $t, "${n}", 0);
push @{$r}, __getReg($i, $t, "${n}_MASK", 3);
push @{$r}, __getReg($i, $t, "${n}_ACT0", 6);
push @{$r}, __getReg($i, $t, "${n}_ACT1", 7);
push @{$r}, __getReg($i, $t, "${n}_WOF", 8) if ($l->{config} =~ /W/);
push @{$r}, __getReg($i, $t, "${n}_ACT2", 9) if ($l->{config} =~ /2/);
push @{$node->{register}}, @{$r};
for ( @{$l->{action}} )
{
push @{$node->{rule}},
__getAct( $n, $inst_range, $_->{attn_type}, $_->{config} );
}
}
delete $node->{local_fir};
}
#-------------------------------------------------------------------------------
# This is not very efficient, especially for large data structures. It is
# recommended to use Data::Compare, but that is not available on the pool
# machines.
sub __dirtyCompare($$)
{
local $Data::Dumper::Terse = 1;
local $Data::Dumper::Indent = 0;
local $Data::Dumper::Sortkeys = 1;
my ( $a, $b ) = ( Dumper(shift), Dumper(shift) );
return $a eq $b;
}
#-------------------------------------------------------------------------------
sub __normalizeRegister($$)
{
my ( $node, $regs ) = @_;
# There must be at least one register entry.
unless ( defined $node->{register} and 0 < scalar @{$node->{register}} )
{
FAIL( "Node $node->{name} does not contain at least one register" );
}
# All of the registers will be put in the master register list for the chip.
for my $r ( @{$node->{register}} )
{
# Set the default access if needed.
$r->{access} = 'RW' unless ( defined $r->{access} );
# Each register will keep track of its type.
$r->{reg_type} = $node->{reg_type};
for my $model_ec ( __expandModelEc($node->{model_ec}) )
{
if ( defined $regs->{$model_ec}->{$r->{name}} )
{
# This register already exists so check the contents for
# accuracy
unless ( __dirtyCompare($r, $regs->{$model_ec}->{$r->{name}}) )
{
FAIL("Duplicate register: $r->{name}");
}
}
else
{
# Add this node's register to the master register list.
$regs->{$model_ec}->{$r->{name}} = $r;
}
}
}
# Clean up this node's register data.
delete $node->{register};
}
#-------------------------------------------------------------------------------
sub __normalizeCaptureGroup($$)
{
my ( $node, $insts_data ) = @_;
# Capture groups are optional (although recommended).
return unless ( defined $node->{capture_group} );
for my $c ( @{$node->{capture_group}} )
{
# There must be at least one capture_register.
unless ( defined $c->{capture_register} and
0 < scalar @{$c->{capture_register}} )
{
FAIL("<capture_group> for node $node->{name} does not contain at " .
"least one <capture_register>" );
}
my @node_insts = BitRange::expand($c->{node_inst});
for my $r ( @{$c->{capture_register}} )
{
# node_inst and reg_inst must be the same size.
my @reg_insts = BitRange::expand($r->{reg_inst});
unless ( scalar @node_insts == scalar @reg_insts )
{
FAIL("capture_group/\@node_inst and capture_register/" .
"\@reg_inst list sized not equal for node $node->{name}");
}
# Expand the capture groups so there is one per node instance.
for ( 0 .. (scalar @node_insts - 1) )
{
my ( $ni, $ri ) = ( $node_insts[$_], $reg_insts[$_] );
push @{$insts_data->{$ni}->{capture_group}},
{ reg_name => $r->{reg_name}, reg_inst => $ri };
}
}
}
# Clean up this node's capture group data.
delete $node->{capture_group};
}
#-------------------------------------------------------------------------------
sub __normalizeExpr($$$$); # Called recursively
sub __normalizeExpr($$$$)
{
my ( $in, $ni, $idx, $size ) = @_;
my ( $t, $e, $v1, $v2 ) = ( $in->{type}, $in->{expr},
$in->{value1}, $in->{value2} );
my $out = { type => $t };
if ( "and" eq $t or "or" eq $t )
{
if ( defined $v1 or defined $v2 or
not defined $e or not (0 < scalar @{$e}) )
{
FAIL("Invalid parameters for and/or expression");
}
# Iterate each sub expression.
push @{$out->{expr}}, __normalizeExpr($_, $ni, $idx, $size) for (@{$e});
}
elsif ( "not" eq $t )
{
if ( defined $v1 or defined $v2 or
not defined $e or not (1 == scalar @{$e}) )
{
FAIL("Invalid parameters for not expression");
}
# Iterate each sub expression.
push @{$out->{expr}}, __normalizeExpr($_, $ni, $idx, $size) for (@{$e});
}
elsif ( "lshift" eq $t or "rshift" eq $t )
{
if ( not defined $v1 or defined $v2 or
not defined $e or not (1 == scalar @{$e}) )
{
FAIL("Invalid parameters for lshift/rshift expression");
}
# Copy value1.
$out->{value1} = $v1;
# Iterate each sub expression.
push @{$out->{expr}}, __normalizeExpr($_, $ni, $idx, $size) for (@{$e});
}
elsif ( "reg" eq $t )
{
if ( not defined $v1 or defined $e )
{
FAIL("Invalid parameters for reg expression");
}
# Copy value1.
$out->{value1} = $v1;
# value2 is optional in the XML, update the value to the node or
# register instance.
if ( defined $v2 )
{
my @reg_insts = BitRange::expand($v2);
unless ( $size == scalar @reg_insts )
{
FAIL("reg expression value2:$v2 list not the same ".
"size as containing node's rule instances:$size");
}
$out->{value2} = $reg_insts[$idx];
}
else
{
# The register instance is the same as the node instance.
$out->{value2} = $ni;
}
}
elsif ( "int" eq $t )
{
if ( not defined $v1 or defined $v2 or defined $e )
{
FAIL("Invalid parameters for int expression");
}
# Copy value1.
$out->{value1} = $v1;
}
else
{
FAIL("Unsupported expression type: $t");
}
return $out;
}
#-------------------------------------------------------------------------------
sub __normalizeRule($$)
{
my ( $node, $insts_data ) = @_;
# There must be at least one rule entry.
unless ( defined $node->{rule} and 0 < scalar @{$node->{rule}} )
{
FAIL( "Node $node->{name} does not contain at least one rule" );
}
# There should be only one rule per attention type and node instance for
# this node.
my $rule_dups = {};
for my $r ( @{$node->{rule}} )
{
# There should be exactly one parent expression.
unless ( 1 == scalar @{$r->{expr}} )
{
FAIL("Multiple parent expressions for rule: $node->{name} " .
"$r->{attn_type}");
}
my $expr = $r->{expr}->[0];
my @node_insts = BitRange::expand($r->{node_inst});
my $sz_insts = scalar @node_insts;
# Expand the expression for each node instance.
for my $idx ( 0 .. ($sz_insts - 1) )
{
my $ni = $node_insts[$idx];
# Check for duplicates.
if ( defined $rule_dups->{$r->{attn_type}}->{$ni} )
{
FAIL("Duplicate rule: $node->{name} $r->{attn_type} $ni");
}
else
{
$rule_dups->{$r->{attn_type}}->{$ni} = 1;
}
# Add the rule for this expression.
push @{$insts_data->{$ni}->{rule}},
{ attn_type => $r->{attn_type},
expr => __normalizeExpr($expr, $ni, $idx, $sz_insts) };
}
}
# Clean up this node's rule data.
delete $node->{rule};
}
#-------------------------------------------------------------------------------
sub __normalizeBit($$$)
{
my ( $node, $sigs, $insts_data ) = @_;
# There must be at least one bit entry.
unless ( defined $node->{bit} and 0 < scalar @{$node->{bit}} )
{
FAIL( "Node $node->{name} does not contain at least one bit" );
}
my @node_insts = sort keys %{$insts_data};
my $sz_insts = scalar @node_insts;
# There should be only one child node per node instance bit position.
my $child_dups = {};
for my $b ( sort {$a->{pos} cmp $b->{pos}} @{$node->{bit}} )
{
my @child_insts = ();
# Ensure child_node and node_inst are set properly.
if ( defined $b->{child_node} )
{
# Ensure each bit has a default node_inst attribute if needed.
$b->{node_inst} = "0" unless ( defined $b->{node_inst} );
# Get all of the instances for this child node.
@child_insts = BitRange::expand($b->{node_inst});
# Both inst list must be equal in size.
unless ( $sz_insts == scalar @child_insts )
{
FAIL("node_inst attribute list size for node:$node->{name} " .
"bit:$b->{pos} does not match node instances " .
"represented by the <rule> element");
}
}
elsif ( defined $b->{node_inst} )
{
FAIL("node_inst attribute exists for node:$node->{name} " .
"bit:$b->{pos} with no child_node attribute");
}
# Get the signatures for each node, instance, and bit position.
for my $p ( BitRange::expand($b->{pos}) )
{
for my $i ( 0 .. ($sz_insts-1) )
{
my ( $n, $ni ) = ( $node->{name}, $node_insts[$i] );
# This is to cover a bug in the figtree information where there
# currently is no comment for some bits.
$b->{content} = "" unless ( defined $b->{content} );
for my $model_ec ( __expandModelEc($node->{model_ec}) )
{
# Check if this signature already exists.
if ( defined $sigs->{$model_ec}->{$n}->{$ni}->{$p} and
$b->{content} ne $sigs->{$model_ec}->{$n}->{$ni}->{$p} )
{
FAIL("Duplicate signature for $n $ni $p");
}
# Get the signatures for each node, instance, and bit
# position.
$sigs->{$model_ec}->{$n}->{$ni}->{$p} = $b->{content};
}
# Move onto the next instance unless a child node exists.
next unless ( defined $b->{child_node} );
my $pi = $child_insts[$i];
my $child = { pos => $p,
child_node => $b->{child_node},
node_inst => $pi };
# Ensure this child node doesn't already exist.
if ( defined $child_dups->{$ni}->{$p} and
not __dirtyCompare($child, $child_dups->{$ni}->{$p}) )
{
FAIL("Duplicate child_node for $n $ni $p");
}
# Add this child node.
push @{$insts_data->{$ni}->{bit}}, $child;
}
}
}
# Clean up this node's bit data.
delete $node->{bit};
}
#-------------------------------------------------------------------------------
sub __normalizeNode($$$)
{
my ( $node, $regs, $sigs ) = @_;
# Ensure a valid register type.
unless ( grep { /^$node->{reg_type}$/ } keys %{$REGISTER_TYPE} )
{
FAIL( "Unsupported register type: $node->{reg_type}" );
}
my $insts_data = {}; # Collect data for each instance of this node.
# First, expand the <local_fir> data if it exists.
__normalizeLocalFir($node);
# All registers will be put in a master register list for the chip.
__normalizeRegister($node, $regs);
# Split the capture group information per node instance.
__normalizeCaptureGroup($node, $insts_data);
# Split the rule information per node instance. The sorted instance list
# will be used as indexes for the node_inst attribute of the <bit> elements.
__normalizeRule($node, $insts_data);
# Finally, collect the signature details and split the bit information per
# node instance.
__normalizeBit($node, $sigs, $insts_data);
# Now that we have all of the node data, collapse the instance data into
# a list.
for ( sort keys %{$insts_data} )
{
$insts_data->{$_}->{node_inst} = $_;
push @{$node->{instance}}, $insts_data->{$_};
}
}
#-------------------------------------------------------------------------------
sub normalizeXML($)
{
my ( $xml ) = @_;
my $data = {};
# Iterate each chip file.
for my $chip ( @{$xml->{chip}} )
{
# Iterate each model/EC.
for my $model_ec ( __expandModelEc($chip->{model_ec}) )
{
# Ensure there is not a duplicate definition for a model/EC.
if ( $data->{$model_ec}->{chip} )
{
FAIL("Duplicate data for model/EC $model_ec in:\n" .
" $data->{$model_ec}->{chip}->{path}\n" .
" $chip->{path}");
}
# Add this chip to the data.
$data->{$model_ec}->{attn_tree} = $chip->{attn_tree};
}
}
# Extract the data for each node.
my ( $regs, $sigs, $node_dups ) = ( {}, {}, {} );
for my $node ( sort { $a->{name} cmp $b->{name} } @{$xml->{node}} )
{
# A node may be defined for more than one model/EC.
for my $model_ec ( __expandModelEc($node->{model_ec}) )
{
# A node can only be defined once per model/EC.
if ( defined $node_dups->{$model_ec}->{$node->{name}} )
{
FAIL( "Duplicate node defined for $model_ec -> $node->{name} ");
}
else
{
$node_dups->{$model_ec}->{$node->{name}} = 1;
}
# Initialize the master list of registers and signatures of this
# model/EC, if necessary.
$regs->{$model_ec} = {} unless ( defined $regs->{$model_ec} );
$sigs->{$model_ec} = {} unless ( defined $sigs->{$model_ec} );
}
# The same node content will be used for each model/EC characterized by
# this node. There is some normalization that needs to happen because of
# shorthand elements, like <local_fir>, and some error checking. This
# only needs to be done once per node, not per model/EC.
__normalizeNode( $node, $regs, $sigs );
# Push the node data for each model/EC.
for my $model_ec ( __expandModelEc($node->{model_ec}) )
{
push @{$data->{$model_ec}->{node}}, $node;
}
}
# Sort and collapse the master register list.
for my $m ( keys %{$regs} )
{
for my $n ( sort keys %{$regs->{$m}} )
{
push @{$data->{$m}->{register}}, $regs->{$m}->{$n};
}
}
# Collapse the signature lists.
for my $m ( keys %{$sigs} )
{
for my $n ( sort keys %{$sigs->{$m}} )
{
for my $i ( sort {$a <=> $b} keys %{$sigs->{$m}->{$n}} )
{
for my $b ( sort {$a <=> $b} keys %{$sigs->{$m}->{$n}->{$i}} )
{
push @{$data->{$m}->{signature}},
{ name => $n, inst => $i, bit => $b,
desc => $sigs->{$m}->{$n}->{$i}->{$b} };
}
}
}
}
return $data;
}
#-------------------------------------------------------------------------------
# Output functions
#-------------------------------------------------------------------------------
# The $num passed into this function can be a numeric of string. All values are
# converted to a hex string and then into the binary format. This helps avoid
# portability issues with endianess. Requirements:
# - Hex strings must start with '0x'.
# - For portability, 64-bit numbers must be passed as a hex string.
sub __bin($$$)
{
my ( $fh, $bytes, $num ) = @_;
# $bytes must be a positive integer.
die "Invalid bytes: $bytes" unless ( 0 < $bytes );
my $str = ''; # Default invalid string
my $char = $bytes * 2; # Number of characters in the string.
# Check if $num is a hex string.
if ( $num =~ /^0[x|X](.*)/ )
{
$str = $1; # strip the '0x'
}
# Check if $num is string or numeric decimal integer (32-bit max).
elsif ( $num =~ /^[0-9]+$/ and $bytes <= 4 )
{
$str = sprintf("%0${char}x", $num); # Convert to hex string
}
# Check for a hex number with the valid size.
unless ( $str =~ /^[0-9a-fA-F]{$char}$/ )
{
die "Invalid number: $num (size: $bytes)";
}
# Print the binary string.
print $fh pack( "H$char", $str );
}
#-------------------------------------------------------------------------------
sub __hash($$)
{
my $bytes = shift;
my @str = unpack("C*", shift); # returns an array of ascii values
# Currently only supporting 1, 2, 3, and 4 byte hashes.
unless ( 1 <= $bytes and $bytes <= 4 )
{
FAIL("Unsupported hash size: $bytes");
}
# Add padding to the end of the character array so that the size is
# divisible by $bytes.
push @str, 0 until ( 0 == scalar(@str) % $bytes );
# This hash is a simple "n*s[0] + (n-1)*s[1] + ... + s[n-1]" algorithm,
# where s[i] is a $bytes size chunk of the input string.
my ( $sumA, $sumB ) = ( 0, 0 );
while ( my @chunk = splice @str, 0, $bytes )
{
# Combine the chunk array into a single value.
my $val = 0; for ( @chunk ) { $val <<= 8; $val |= $_; }
# Apply the simple hash.
$sumA += $val;
$sumB += $sumA;
}
# Mask off everything except the target number of bytes.
$sumB &= 0xffffffff >> ((4 - $bytes) * 8);
return $sumB;
}
#-------------------------------------------------------------------------------
sub __printRegisters($$)
{
my ( $fh, $data ) = @_;
my $num_regs = scalar @{$data};
FAIL("No registers defined") unless ( 0 < $num_regs );
# Register list metadata
__bin($fh, 1, $_) for ( unpack("C*", "REGS") );
__bin($fh, 3, $num_regs);
my $reg_ids = {}; # for hash duplicate checking
for my $r ( @{$data} )
{
# Get the hash of the register name and check for duplicates.
my $id = __hash(3, $r->{name});
if ( defined $reg_ids->{$id} )
{
FAIL("Duplicate register ID hash " . sprintf('0x%08x', $id) .
" for $r->{name} and $reg_ids->{$id}");
}
else
{
$reg_ids->{$id} = $r->{name};
}
# Get the attribute flags.
my $flags = 0x00;
$flags |= 0x80 if ( $r->{access} =~ /R/ );
$flags |= 0x40 if ( $r->{access} =~ /W/ );
# Get the number of address instances.
my $num_inst = scalar @{$r->{instance}};
unless ( 0 < $num_inst )
{
FAIL("No register instances defined for $r->{name}");
}
# Register metadata
__bin($fh, 3, $id );
__bin($fh, 1, $REGISTER_TYPE->{$r->{reg_type}}->{id});
__bin($fh, 1, $flags );
__bin($fh, 1, $num_inst);
for my $i ( @{$r->{instance}} )
{
my $s = $REGISTER_TYPE->{$r->{reg_type}}->{addr_size};
# Register Instance metadata
__bin($fh, 1, $i->{reg_inst});
__bin($fh, $s, $i->{addr} );
}
}
}
#-------------------------------------------------------------------------------
sub __printExpr($$$);
sub __printExpr($$$)
{
my ( $fh, $size, $expr ) = @_;
my ( $t, $e, $v1, $v2 ) = ( $expr->{type}, $expr->{expr},
$expr->{value1}, $expr->{value2} );
if ( "reg" eq $t )
{
__bin($fh, 1, 0x01); # expression type for "reg"
__bin($fh, 3, __hash(3,$v1)); # register id
__bin($fh, 1, $v2); # register instance
}
elsif ( "int" eq $t )
{
__bin($fh, 1, 0x02); # expression type for "int"
__bin($fh, $size, $v1); # integer value
}
elsif ( "and" eq $t )
{
__bin($fh, 1, 0x10); # expression type for "and"
__bin($fh, 1, scalar @{$e}); # number of sub-expressions
__printExpr($fh, $size, $_) for ( @{$e} ); # add each sub-expression
}
elsif ( "or" eq $t )
{
__bin($fh, 1, 0x11); # expression type for "or"
__bin($fh, 1, scalar @{$e}); # number of sub-expressions
__printExpr($fh, $size, $_) for ( @{$e} ); # add each sub-expression
}
elsif ( "not" eq $t )
{
__bin($fh, 1, 0x12); # expression type for "not"
__printExpr($fh, $size, $e->[0]); # add only sub-expression
}
elsif ( "lshift" eq $t )
{
__bin($fh, 1, 0x13); # expression type for "lshift"
__bin($fh, 1, $v1); # shift amount
__printExpr($fh, $size, $e->[0]); # add only sub-expression
}
elsif ( "rshift" eq $t )
{
__bin($fh, 1, 0x14); # expression type for "rshift"
__bin($fh, 1, $v1); # shift amount
__printExpr($fh, $size, $e->[0]); # add only sub-expression
}
}
#-------------------------------------------------------------------------------
sub __printNodes($$)
{
my ( $fh, $data ) = @_;
my $num_nodes = scalar @{$data};
FAIL("No nodes defined") unless ( 0 < $num_nodes );
# Isolation Node list metadata
__bin($fh, 1, $_) for ( unpack("C*", "NODE") );
__bin($fh, 2, $num_nodes);
my $node_ids = {}; # for hash duplicate checking
for my $n ( @{$data} )
{
# Get the hash of the node name and check for duplicates.
my $id = __hash(2, $n->{name});
if ( defined $node_ids->{$id} )
{
FAIL("Duplicate node ID hash " . sprintf('0x%08x', $id) .
" for $n->{name} and $node_ids->{$id}");
}
else
{
$node_ids->{$id} = $n->{name};
}
my $num_insts = scalar @{$n->{instance}};
unless ( 0 < $num_insts )
{
FAIL("No nodes instances defined for $n->{name}");
}
my $reg_type = $REGISTER_TYPE->{$n->{reg_type}}->{id};
my $reg_size = $REGISTER_TYPE->{$n->{reg_type}}->{reg_size};
# Register metadata
__bin($fh, 2, $id);
__bin($fh, 1, $reg_type);
__bin($fh, 1, $num_insts);
for my $i ( @{$n->{instance}} )
{
# Capture groups are optional.
my $num_cap_regs = (defined $i->{capture_group})
? scalar @{$i->{capture_group}} : 0;
# At least one rule is required.
my $num_rules = scalar @{$i->{rule}};
unless ( 0 < $num_rules )
{
FAIL("No rule for $n->{name} $i->{node_inst}");
}
# Child nodes may not exist for this node.
my $num_bit = (defined $i->{bit}) ? scalar @{$i->{bit}} : 0;
# Register instance metadata
__bin($fh, 1, $i->{node_inst});
__bin($fh, 1, $num_cap_regs );
__bin($fh, 1, $num_rules );
__bin($fh, 1, $num_bit );
if ( 0 < $num_cap_regs )
{
for my $cg ( @{$i->{capture_group}} )
{
# Register capture register metadata
__bin($fh, 3, __hash(3, $cg->{reg_name}));
__bin($fh, 1, $cg->{reg_inst} );
}
}
for my $r ( @{$i->{rule}} )
{
# Register rule metadata
__bin($fh, 1, $ATTN_TYPE->{$r->{attn_type}});
__printExpr($fh, $reg_size, $r->{expr});
}
if ( 0 < $num_bit )
{
for my $b ( @{$i->{bit}} )
{
# Register child node metadata
__bin($fh, 1, $b->{pos} );
__bin($fh, 2, __hash(2, $b->{child_node}));
__bin($fh, 1, $b->{node_inst} );
}
}
}
}
}
#-------------------------------------------------------------------------------
sub __printAttnTree($$)
{
my ( $fh, $data ) = @_;
my $num_root_nodes = scalar @{$data};
FAIL("No root nodes defined") unless ( 0 < $num_root_nodes );
# Root Node list metadata
__bin($fh, 1, $_) for ( unpack("C*", "ROOT") );
__bin($fh, 1, $num_root_nodes);
for my $r ( @{$data} )
{
# Root Node metadata
__bin($fh, 1, $ATTN_TYPE->{$r->{attn_type}});
__bin($fh, 2, __hash(2, $r->{root_node}) );
__bin($fh, 1, $r->{node_inst} );
}
}
#-------------------------------------------------------------------------------
sub __printSignatures($$)
{
my ( $fh, $data ) = @_;
my $num_sigs = scalar @{$data};
FAIL("No signatures defined") unless ( 0 < $num_sigs );
for my $s ( @{$data} )
{
my $sig = __hash(2,$s->{name}) << 16 | $s->{inst} << 8 | $s->{bit};
# TODO: This is temporary until we have defined the signature files.
print $fh sprintf('0x%08x',$sig) .
" $s->{name} $s->{inst} $s->{bit} $s->{desc}\n";
}
}
#-------------------------------------------------------------------------------
sub buildBinary($$)
{
my ( $dir, $data ) = @_;
while ( my ($model_ec, $chip) = each %{$data} )
{
unless ( defined $chip->{register} )
{
FAIL("Chip $model_ec does not contain registers");
}
unless ( defined $chip->{node} )
{
FAIL("Chip $model_ec does not contain nodes");
}
unless ( defined $chip->{attn_tree} )
{
FAIL("Chip $model_ec does not contain attn_tree information");
}
my $bin_file = "$dir/chip_data_" . lc $model_ec . ".cdb";
open my $bin_fh, '>', $bin_file or die "Cannot open $bin_file: $!";
binmode $bin_fh; # writes a binary file
# Chip Data File metadata
__bin($bin_fh, 1, $_) for ( unpack("C*", "CHIPDATA") );
__bin($bin_fh, 4, $SUPPORTED_MODEL_EC->{$model_ec});
__bin($bin_fh, 1, $FILE_VERSION->{VER_01} );
__printRegisters( $bin_fh, $chip->{register} );
__printNodes( $bin_fh, $chip->{node} );
__printAttnTree( $bin_fh, $chip->{attn_tree} );
close $bin_fh;
unless ( defined $chip->{signature} )
{
FAIL("Chip $model_ec does not contain signatures");
}
my $sig_file = "$dir/chip_signatures_" . lc $model_ec . ".txt";
open my $sig_fh, '>', $sig_file or die "Cannot open $sig_file: $!";
__printSignatures( $sig_fh, $chip->{signature} );
close $sig_fh;
}
}