Zane Shelley | b9ea93c | 2023-03-10 10:41:41 -0600 | [diff] [blame^] | 1 | { |
| 2 | "version": 1, |
| 3 | "model_ec": ["P10_20"], |
| 4 | "registers": { |
| 5 | "EQ_QME_FIR": { |
| 6 | "instances": { |
| 7 | "0": "0x200E0000", |
| 8 | "1": "0x210E0000", |
| 9 | "2": "0x220E0000", |
| 10 | "3": "0x230E0000", |
| 11 | "4": "0x240E0000", |
| 12 | "5": "0x250E0000", |
| 13 | "6": "0x260E0000", |
| 14 | "7": "0x270E0000" |
| 15 | } |
| 16 | }, |
| 17 | "EQ_QME_FIR_MASK": { |
| 18 | "instances": { |
| 19 | "0": "0x200E0004", |
| 20 | "1": "0x210E0004", |
| 21 | "2": "0x220E0004", |
| 22 | "3": "0x230E0004", |
| 23 | "4": "0x240E0004", |
| 24 | "5": "0x250E0004", |
| 25 | "6": "0x260E0004", |
| 26 | "7": "0x270E0004" |
| 27 | } |
| 28 | }, |
| 29 | "EQ_QME_FIR_ACT0": { |
| 30 | "instances": { |
| 31 | "0": "0x200E0008", |
| 32 | "1": "0x210E0008", |
| 33 | "2": "0x220E0008", |
| 34 | "3": "0x230E0008", |
| 35 | "4": "0x240E0008", |
| 36 | "5": "0x250E0008", |
| 37 | "6": "0x260E0008", |
| 38 | "7": "0x270E0008" |
| 39 | } |
| 40 | }, |
| 41 | "EQ_QME_FIR_ACT1": { |
| 42 | "instances": { |
| 43 | "0": "0x200E000C", |
| 44 | "1": "0x210E000C", |
| 45 | "2": "0x220E000C", |
| 46 | "3": "0x230E000C", |
| 47 | "4": "0x240E000C", |
| 48 | "5": "0x250E000C", |
| 49 | "6": "0x260E000C", |
| 50 | "7": "0x270E000C" |
| 51 | } |
| 52 | } |
| 53 | }, |
| 54 | "isolation_nodes": { |
| 55 | "EQ_QME_FIR": { |
| 56 | "instances": [0, 1, 2, 3, 4, 5, 6, 7], |
| 57 | "rules": [ |
| 58 | { |
| 59 | "attn_type": ["CS"], |
| 60 | "node_inst": [0, 1, 2, 3, 4, 5, 6, 7], |
| 61 | "expr": { |
| 62 | "expr_type": "and", |
| 63 | "exprs": [ |
| 64 | { |
| 65 | "expr_type": "reg", |
| 66 | "reg_name": "EQ_QME_FIR" |
| 67 | }, |
| 68 | { |
| 69 | "expr_type": "not", |
| 70 | "expr": { |
| 71 | "expr_type": "reg", |
| 72 | "reg_name": "EQ_QME_FIR_MASK" |
| 73 | } |
| 74 | }, |
| 75 | { |
| 76 | "expr_type": "not", |
| 77 | "expr": { |
| 78 | "expr_type": "reg", |
| 79 | "reg_name": "EQ_QME_FIR_ACT0" |
| 80 | } |
| 81 | }, |
| 82 | { |
| 83 | "expr_type": "not", |
| 84 | "expr": { |
| 85 | "expr_type": "reg", |
| 86 | "reg_name": "EQ_QME_FIR_ACT1" |
| 87 | } |
| 88 | } |
| 89 | ] |
| 90 | } |
| 91 | }, |
| 92 | { |
| 93 | "attn_type": ["RE"], |
| 94 | "node_inst": [0, 1, 2, 3, 4, 5, 6, 7], |
| 95 | "expr": { |
| 96 | "expr_type": "and", |
| 97 | "exprs": [ |
| 98 | { |
| 99 | "expr_type": "reg", |
| 100 | "reg_name": "EQ_QME_FIR" |
| 101 | }, |
| 102 | { |
| 103 | "expr_type": "not", |
| 104 | "expr": { |
| 105 | "expr_type": "reg", |
| 106 | "reg_name": "EQ_QME_FIR_MASK" |
| 107 | } |
| 108 | }, |
| 109 | { |
| 110 | "expr_type": "not", |
| 111 | "expr": { |
| 112 | "expr_type": "reg", |
| 113 | "reg_name": "EQ_QME_FIR_ACT0" |
| 114 | } |
| 115 | }, |
| 116 | { |
| 117 | "expr_type": "reg", |
| 118 | "reg_name": "EQ_QME_FIR_ACT1" |
| 119 | } |
| 120 | ] |
| 121 | } |
| 122 | } |
| 123 | ], |
| 124 | "bits": { |
| 125 | "0": { |
| 126 | "desc": "PPE halted due to an error" |
| 127 | }, |
| 128 | "1": { |
| 129 | "desc": "PPE asserted debug trigger" |
| 130 | }, |
| 131 | "2": { |
| 132 | "desc": "Spare trigger for testing or workarounds" |
| 133 | }, |
| 134 | "3": { |
| 135 | "desc": "PPE asserted a watchdog timeout condition" |
| 136 | }, |
| 137 | "4": { |
| 138 | "desc": "QME hardware detected its own timeout on the PCB Slave interface" |
| 139 | }, |
| 140 | "5": { |
| 141 | "desc": "Block Copy Engine or QME PPE direct access error from the Fabric" |
| 142 | }, |
| 143 | "6": { |
| 144 | "desc": "SRAM Uncorrectable Error" |
| 145 | }, |
| 146 | "7": { |
| 147 | "desc": "SRAM Correctable Error" |
| 148 | }, |
| 149 | "8": { |
| 150 | "desc": "Resonant Clock Table array Parity Error" |
| 151 | }, |
| 152 | "9": { |
| 153 | "desc": "PIG request of PCB interrupt before its previous interrupt completed" |
| 154 | }, |
| 155 | "10": { |
| 156 | "desc": "Scrub timer tick occurred when scrub is still pending" |
| 157 | }, |
| 158 | "11": { |
| 159 | "desc": "QME_LFIR_CTFS_ERR" |
| 160 | }, |
| 161 | "12": { |
| 162 | "desc": "QME_LFIR_CPMS_ERR" |
| 163 | }, |
| 164 | "13": { |
| 165 | "desc": "PGPE Heartbeat Lost from a hw deadman timer controlled by QHB" |
| 166 | }, |
| 167 | "14": { |
| 168 | "desc": "BCE forward progress error" |
| 169 | }, |
| 170 | "15": { |
| 171 | "desc": "Resclk TARGET_PSTATE Change Protocol Error" |
| 172 | }, |
| 173 | "16": { |
| 174 | "desc": "PCB Network or Endpoint Reset occurred when QME was not halted" |
| 175 | }, |
| 176 | "17": { |
| 177 | "desc": "Firmware cleared special wakeup request before SPECIAL_WKUP_DONE" |
| 178 | }, |
| 179 | "18": { |
| 180 | "desc": "A new special wakeup right after previous cleared" |
| 181 | }, |
| 182 | "19": { |
| 183 | "desc": "Core External Interrupt wakeup sources present but disabled by threads" |
| 184 | }, |
| 185 | "20": { |
| 186 | "desc": "Core External Interrupt present but the chiplet is deconfigured" |
| 187 | }, |
| 188 | "21": { |
| 189 | "desc": "Reserved" |
| 190 | }, |
| 191 | "22": { |
| 192 | "desc": "PB read cmd waited too long for lost data (hang)" |
| 193 | }, |
| 194 | "23": { |
| 195 | "desc": "PPE tried to write a protected addr as defined by the SWPR[n] register" |
| 196 | }, |
| 197 | "24": { |
| 198 | "desc": "DTC Sequencer read a UE from SRAM" |
| 199 | }, |
| 200 | "25": { |
| 201 | "desc": "Correctable error detected on incoming data for a PowerBus read" |
| 202 | }, |
| 203 | "26": { |
| 204 | "desc": "UE Detected on incoming data for a PowerBus read" |
| 205 | }, |
| 206 | "27": { |
| 207 | "desc": "SUE Detected on incoming data for a PowerBus read" |
| 208 | }, |
| 209 | "28": { |
| 210 | "desc": "PB Request address hit an invalid entry in the TOPOLOGY XLATE TABLE" |
| 211 | }, |
| 212 | "29": { |
| 213 | "desc": "Parity error detected on a powerbus tag" |
| 214 | }, |
| 215 | "30": { |
| 216 | "desc": "Code attempted to write the PIG register when the previous request was still pending" |
| 217 | }, |
| 218 | "31": { |
| 219 | "desc": "Local access error bit(s) set" |
| 220 | }, |
| 221 | "32": { |
| 222 | "desc": "CE detected on read to the SSA located in QME powerbus routing logic" |
| 223 | }, |
| 224 | "33": { |
| 225 | "desc": "UE detected on read to the SSA located in QME powerbus routing logic" |
| 226 | }, |
| 227 | "34": { |
| 228 | "desc": "Resonant clock CCFG parity error" |
| 229 | }, |
| 230 | "35": { |
| 231 | "desc": "spare" |
| 232 | } |
| 233 | } |
| 234 | } |
| 235 | } |
| 236 | } |