blob: d63265605fbebe74ba4cc404a5613e51e4a364d8 [file] [log] [blame]
#pragma once
#include "occ_errors.hpp"
#include "utils.hpp"
#include <org/open_power/OCC/PassThrough/server.hpp>
#include <sdbusplus/bus.hpp>
#include <sdbusplus/server/object.hpp>
#include <string>
namespace open_power
{
namespace occ
{
// For waiting on signals
namespace sdbusRule = sdbusplus::bus::match::rules;
enum class CmdType
{
POLL = 0x00,
CLEAR_ERROR_LOG = 0x12,
SET_MODE_AND_STATE = 0x20,
SET_CONFIG_DATA = 0x21,
SET_USER_PCAP = 0x22,
RESET_PREP = 0x25,
SEND_AMBIENT = 0x30,
DEBUG_PASS_THROUGH = 0x40,
AME_PASS_THROUGH = 0x41,
GET_FIELD_DEBUG_DATA = 0x42,
MFG_TEST = 0x53
};
enum class OccState
{
NO_CHANGE = 0x00,
STANDBY = 0x01,
OBSERVATION = 0x02,
ACTIVE = 0x03,
SAFE = 0x04,
CHARACTERIZATION = 0x05
};
enum class SysPwrMode
{
NO_CHANGE = 0,
STATIC = 0x01, // Static Base Frequencey
SFP = 0x03, // Static Frequency Point (requires freqPt)
SAFE = 0x04, // reported when system is in SAFE mode (not settable)
POWER_SAVING = 0x05, // Static Power Saving
MAX_FREQ = 0x09, // Maximum Frequency (per chip)
DYNAMIC_PERF = 0x0A, // Dynamic / Balanced Performance
FFO = 0x0B, // Fixed Frequency Override (requires freqPt)
MAX_PERF = 0x0C // Maximum Performance
};
// Only some of the SysPwrModes are currently supported and allowed to be set
#define VALID_POWER_MODE_SETTING(mode) \
((mode == SysPwrMode::STATIC) || (mode == SysPwrMode::POWER_SAVING) || \
(mode == SysPwrMode::DYNAMIC_PERF) || (mode == SysPwrMode::MAX_PERF))
#define VALID_OEM_POWER_MODE_SETTING(mode) \
((mode == SysPwrMode::SFP) || (mode == SysPwrMode::FFO) || \
(mode == SysPwrMode::MAX_FREQ))
enum class RspStatus
{
SUCCESS = 0x00,
CONDITIONAL_SUCCESS = 0x01,
INVALID_COMMAND = 0x11,
INVALID_COMMAND_LENGTH = 0x12,
INVALID_DATA_FIELD = 0x13,
CHECKSUM_FAILURE = 0x14,
INTERNAL_ERROR = 0x15,
PRESENT_STATE_PROHIBITS = 0x16,
COMMAND_IN_PROGRESS = 0xFF
};
enum class CmdStatus
{
SUCCESS = 0x00,
FAILURE = 0x02,
COMM_FAILURE = 0x03
};
/** @brief Trace block of data in hex with log<level:INFO>
*
* @param[in] data - vector containing data to trace
* @param[in] data_len - optional number of bytes to trace
* If 0, entire vector will be traced.
*/
void dump_hex(const std::vector<std::uint8_t>& data,
const unsigned int data_len = 0);
/** @class OccCommand
* @brief Send commands and process respsonses from the OCC
*/
class OccCommand
{
public:
OccCommand() = delete;
OccCommand(const OccCommand&) = delete;
OccCommand& operator=(const OccCommand&) = delete;
OccCommand(OccCommand&&) = default;
OccCommand& operator=(OccCommand&&) = default;
/** @brief Ctor to set up which OCC the command will go to
*
* @param[in] instance - OCC instance
* @param[in] path - Path to attach at
*/
OccCommand(uint8_t instance, const char* path);
/** @brief Dtor to clean up and close device */
~OccCommand()
{
closeDevice();
}
/** @brief Send the command to the OCC and collect the response.
* The checksum will be validated and removed from the response.
*
* @param[in] command - command to pass-through
* @param[out] response - response
* returns SUCCESS if response was received
*/
CmdStatus send(const std::vector<std::uint8_t>& command,
std::vector<std::uint8_t>& response);
private:
/** @brief Instance number of the target OCC */
uint8_t occInstance;
/** @brief OCC path on the bus */
std::string path;
/** @brief OCC device path
* For now, here is the hard-coded mapping until
* the udev rule is in.
* occ0 --> /dev/occ1
* occ1 --> /dev/occ2
* ...
*/
std::string devicePath;
/** @brief Indicates whether or not the OCC is currently active */
bool occActive = false;
/** brief file descriptor associated with occ device */
int fd = -1;
/** @brief Subscribe to OCC Status signal
*
* Once the OCC status gets to active, only then we will get /dev/occ2
* populated and hence need to wait on that before opening that
*/
sdbusplus::bus::match_t activeStatusSignal;
/** Opens devicePath and populates file descriptor */
void openDevice();
/** Closed the fd associated with opened device */
void closeDevice();
/** @brief Callback function on OCC Status change signals
*
* @param[in] msg - Data associated with subscribed signal
*/
void activeStatusEvent(sdbusplus::message::message& msg);
};
} // namespace occ
} // namespace open_power