blob: 453fef253c2c9abe3271d652ffdd29353510e513 [file] [log] [blame]
project(
'openpower-occ-control', 'cpp',
version : '1.0.0',
meson_version: '>=0.57.0',
default_options: [
'warning_level=3',
'werror=true',
'cpp_std=c++20',
'buildtype=debugoptimized'
]
)
conf_data = configuration_data()
conf_data.set_quoted('OCC_CONTROL_BUSNAME', 'org.open_power.OCC.Control')
conf_data.set_quoted('OCC_CONTROL_ROOT', '/org/open_power/control')
conf_data.set_quoted('OCC_SENSORS_ROOT', '/xyz/openbmc_project/sensors')
conf_data.set_quoted('CPU_NAME', 'cpu')
conf_data.set_quoted('OCC_NAME', 'occ')
conf_data.set_quoted('OCC_MASTER_NAME', 'occ-hwmon.1')
conf_data.set_quoted('OCC_DEV_PATH', '/dev/occ')
conf_data.set_quoted('CPU_SUBPATH', '/xyz/openbmc_project/inventory/system/chassis/motherboard')
conf_data.set('MAX_CPUS', get_option('max-cpus'))
conf_data.set('OCC_CPU_TEMP_SENSOR_TYPE', 0xC0)
conf_data.set('OCC_DIMM_TEMP_SENSOR_TYPE', 0xD0)
conf_data.set('PS_DERATING_FACTOR', 90)
if get_option('i2c-occ').enabled()
conf_data.set_quoted('OCC_HWMON_PATH', '/sys/bus/i2c/drivers/occ-hwmon/')
conf_data.set_quoted('DEV_PATH', '/sys/bus/i2c/devices')
conf_data.set_quoted('I2C_OCC_DEVICE_NAME', 'p8-occ-hwmon')
else
conf_data.set_quoted('OCC_HWMON_PATH', '/sys/bus/platform/drivers/occ-hwmon/')
conf_data.set_quoted('DEV_PATH', '/sys/bus/platform/devices/')
endif
if get_option('install-error-yaml').disabled()
conf_data.set('I2C_OCC', get_option('i2c-occ').enabled())
conf_data.set('READ_OCC_SENSORS', get_option('read-occ-sensors').enabled())
conf_data.set('PLDM', get_option('with-host-communication-protocol')=='pldm')
conf_data.set('POWER10', get_option('power10-support').enabled())
endif
configure_file(output: 'config.h',
configuration: conf_data
)
sdbusplusplus_prog = find_program('sdbus++')
sdbuspp_gen_meson_prog = find_program('sdbus++-gen-meson')
python_prog = find_program('python3', required: true)
realpath_prog = find_program('realpath')
selected_subdirs = []
selected_subdirs += 'org/open_power/OCC'
generated_root = meson.current_build_dir() / 'gen'
generated_others = []
generated_sources = []
# Source the generated meson files.
subdir('gen')
foreach d : selected_subdirs
subdir('gen' / d)
endforeach
# Parse through the list from sdbus++-gendir and put into sets.
generated_headers = []
generated_cpp = []
generated_others_files = []
foreach g : generated_sources generated_others
foreach f : g.to_list()
rel_path = run_command(
realpath_prog,
'--relative-to', generated_root,
f.full_path(),
).stdout().strip().split('\n')[-1]
if rel_path.endswith('.hpp')
generated_headers += rel_path
elif rel_path.endswith('.cpp')
generated_cpp += rel_path
else
generated_others_files += rel_path
endif
endforeach
endforeach
deps = []
sources = []
if get_option('install-error-yaml').disabled()
sdbusplus_dep = dependency('sdbusplus')
sdeventplus_dep = dependency('sdeventplus')
phosphor_logging_dep = dependency('phosphor-logging')
phosphor_dbus_interfaces_dep = dependency('phosphor-dbus-interfaces')
deps += [
sdbusplus_dep,
sdeventplus_dep,
phosphor_logging_dep,
phosphor_dbus_interfaces_dep,
]
sources += [
'app.cpp',
'occ_pass_through.cpp',
'occ_manager.cpp',
'occ_status.cpp',
'occ_device.cpp',
'occ_errors.cpp',
'occ_presence.cpp',
'occ_command.cpp',
'occ_dbus.cpp',
'powercap.cpp',
'i2c_occ.cpp',
'utils.cpp',
]
if get_option('with-host-communication-protocol')=='pldm'
libpldm_dep = dependency('libpldm')
deps += [
libpldm_dep,
]
sources += [
'pldm.cpp',
]
endif
if get_option('power10-support').enabled()
sources += [
'powermode.cpp',
]
endif
yamldir = get_option('yamldir')
if yamldir == ''
yamldir = meson.project_source_root() / 'example/occ_sensor.yaml'
endif
# Generate occ-sensor.hpp.
occ_sensor_hpp = custom_target(
'occ-sensor.hpp',
command : [
python_prog,
meson.project_source_root() + '/sensor_gen.py',
'-f', meson.project_source_root() / yamldir,
'-i', meson.current_build_dir(),
],
output : 'occ-sensor.hpp')
sources += [occ_sensor_hpp]
executable(
'openpower-occ-control',
sources,
generated_sources,
include_directories: ['.', 'gen'],
implicit_include_directories: true,
dependencies: deps,
install: true,
install_dir: get_option('bindir')
)
endif
if not get_option('tests').disabled()
subdir('test')
endif