powermode.hpp - openbmc/openpower-occ-control - Gitiles

 #pragma once

 #include "config.h"

 #ifdef POWER10
 #include "occ_command.hpp"

 #include <cereal/archives/json.hpp>
 //#include <cereal/archives/binary.hpp>
 #include <cereal/cereal.hpp>
 #include <cereal/types/string.hpp>
 #include <cereal/types/tuple.hpp>
 #include <cereal/types/vector.hpp>
 #include <sdbusplus/bus.hpp>
 #include <sdbusplus/bus/match.hpp>
 #include <xyz/openbmc_project/Control/Power/IdlePowerSaver/server.hpp>
 #include <xyz/openbmc_project/Control/Power/Mode/server.hpp>

 #include <filesystem>

 namespace open_power
 {
 namespace occ
 {

 class Manager;

 namespace powermode
 {
 namespace Base = sdbusplus::xyz::openbmc_project::Control::Power::server;
 using ModeInterface = sdbusplus::server::object::object<Base::Mode>;
 using IpsInterface = sdbusplus::server::object::object<Base::IdlePowerSaver>;
 using namespace std::literals::string_literals;

 constexpr auto PMODE_PATH = "/xyz/openbmc_project/control/host0/power_mode";
 constexpr auto PMODE_INTERFACE = "xyz.openbmc_project.Control.Power.Mode";
 constexpr auto POWER_MODE_PROP = "PowerMode";

 constexpr auto PIPS_PATH = "/xyz/openbmc_project/control/host0/power_ips";
 constexpr auto PIPS_INTERFACE =
     "xyz.openbmc_project.Control.Power.IdlePowerSaver";
 constexpr auto IPS_ENABLED_PROP = "Enabled";
 constexpr auto IPS_ENTER_UTIL = "EnterUtilizationPercent";
 constexpr auto IPS_ENTER_TIME = "EnterDwellTime";
 constexpr auto IPS_EXIT_UTIL = "ExitUtilizationPercent";
 constexpr auto IPS_EXIT_TIME = "ExitDwellTime";

 const auto PMODE_DEFAULT_INTERFACE =
     "xyz.openbmc_project.Configuration.PowerModeProperties"s;

 /** @brief Query the current Hypervisor target
  * @return true if the current Hypervisor target is PowerVM
  */
 bool isPowerVM();

 /** @brief Convert power mode string to OCC SysPwrMode value
  *
  * @param[in] i_modeString - power mode string
  *
  * @return  SysPwrMode or SysPwrMode::NO_CHANGE if not found
  */
 SysPwrMode convertStringToMode(const std::string& i_modeString);

 struct PowerModeData
 {
     bool modeInitialized = false;
     SysPwrMode mode = SysPwrMode::NO_CHANGE;
     uint16_t oemModeData = 0x0000;
     bool ipsInitialized = false;
     bool ipsEnabled = true;
     uint8_t ipsEnterUtil = 0;
     uint16_t ipsEnterTime = 0;
     uint8_t ipsExitUtil = 0;
     uint16_t ipsExitTime = 0;

     /** @brief Function specifying data to archive for cereal.
      */
     template <class Archive>
     void serialize(Archive& archive)
     {
         archive(modeInitialized, mode, oemModeData, ipsInitialized, ipsEnabled,
                 ipsEnterUtil, ipsEnterTime, ipsExitUtil, ipsExitTime);
     }
 };

 /** @class OccPersistData
  *  @brief Provides persistent container to store data for OCC
  *
  * Data is stored via cereal
  */
 class OccPersistData
 {
   public:
     ~OccPersistData() = default;
     OccPersistData(const OccPersistData&) = default;
     OccPersistData& operator=(const OccPersistData&) = default;
     OccPersistData(OccPersistData&&) = default;
     OccPersistData& operator=(OccPersistData&&) = default;

     /** @brief Loads any saved power mode data */
     OccPersistData()
     {
         load();
     }

     /** @brief Save Power Mode data to persistent file
      *
      *  @param[in] newMode - desired System Power Mode
      *  @param[in] oemModeData - data required by some OEM Power Modes
      */
     void updateMode(const SysPwrMode newMode, const uint16_t oemModeData)
     {
         modeData.mode = newMode;
         modeData.oemModeData = oemModeData;
         modeData.modeInitialized = true;
         save();
     }

     /** @brief Write Idle Power Saver parameters to persistent file
      *
      *  @param[in] enabled - Idle Power Save status (true = enabled)
      *  @param[in] enterUtil - IPS Enter Utilization (%)
      *  @param[in] enterTime - IPS Enter Time (seconds)
      *  @param[in] exitUtil - IPS Exit Utilization (%)
      *  @param[in] exitTime - IPS Exit Time (seconds)
      */
     void updateIPS(const bool enabled, const uint8_t enterUtil,
                    const uint16_t enterTime, const uint8_t exitUtil,
                    const uint16_t exitTime)
     {
         modeData.ipsEnabled = enabled;
         modeData.ipsEnterUtil = enterUtil;
         modeData.ipsEnterTime = enterTime;
         modeData.ipsExitUtil = exitUtil;
         modeData.ipsExitTime = exitTime;
         modeData.ipsInitialized = true;
         save();
     }

     /** @brief Return the Power Mode and mode data
      *
      *  @param[out] mode - current system power mode
      *  @param[out] oemModeData - frequency data for some OEM mode
      *
      *  @returns true if mode was available
      */
     bool getMode(SysPwrMode& mode, uint16_t& oemModeData) const
     {
         if (!modeData.modeInitialized)
         {
             return false;
         }

         mode = modeData.mode;
         oemModeData = modeData.oemModeData;
         return true;
     }

     /** @brief Get the Idle Power Saver properties from DBus
      *
      *  @param[out] enabled - Idle Power Save status (true = enabled)
      *  @param[out] enterUtil - IPS Enter Utilization (%)
      *  @param[out] enterTime - IPS Enter Time (seconds)
      *  @param[out] exitUtil - IPS Exit Utilization (%)
      *  @param[out] exitTime - IPS Exit Time (seconds)
      *
      * @return true if parameters were read successfully
      */
     bool getIPS(bool& enabled, uint8_t& enterUtil, uint16_t& enterTime,
                 uint8_t& exitUtil, uint16_t& exitTime)
     {
         if (!modeData.ipsInitialized)
         {
             return false;
         }

         enabled = modeData.ipsEnabled;
         enterUtil = modeData.ipsEnterUtil;
         enterTime = modeData.ipsEnterTime;
         exitUtil = modeData.ipsExitUtil;
         exitTime = modeData.ipsExitTime;
         return true;
     }

     /** @brief Return true if the power mode is available */
     bool modeAvailable()
     {
         return (modeData.modeInitialized);
     }

     /** @brief Return true if the IPS data is available */
     bool ipsAvailable()
     {
         return (modeData.ipsInitialized);
     }

     /** @brief Saves the Power Mode data in the filesystem using cereal. */
     void save();

     /** @brief Trace the Power Mode and IPS parameters. */
     void print();

   private:
     /** @brief Power Mode data filename to store persistent data */
     static constexpr auto powerModeFilename = "powerModeData";

     /** @brief Power Mode data object to be persisted */
     PowerModeData modeData;

     /** @brief Loads the OEM mode data in the filesystem using cereal. */
     void load();
 };

 /** @class PowerMode
  *  @brief Monitors for changes to the power mode and notifies occ
  *
  *  The customer power mode is provided to the OCC by host TMGT when the occ
  *  first goes active or is reset.  This code is responsible for sending
  *  the power mode to the OCC if the mode is changed while the occ is active.
  */

 class PowerMode : public ModeInterface, public IpsInterface
 {
   public:
     /** @brief PowerMode object to inform occ of changes to mode
      *
      * This object will monitor for changes to the power mode setting.
      * If a change is detected, and the occ is active, then this object will
      * notify the OCC of the change.
      *
      * @param[in] managerRef - manager object reference
      * @param[in] modePath - Power Mode dbus path
      * @param[in] ipsPath - Idle Power Saver dbus path
      */
     explicit PowerMode(const Manager& managerRef, const char* modePath,
                        const char* ipsPath) :
         ModeInterface(utils::getBus(), modePath, false),
         IpsInterface(utils::getBus(), ipsPath, false), manager(managerRef),
         pmodeMatch(utils::getBus(),
                    sdbusplus::bus::match::rules::propertiesChanged(
                        PMODE_PATH, PMODE_INTERFACE),
                    [this](auto& msg) { this->modeChanged(msg); }),
         ipsMatch(utils::getBus(),
                  sdbusplus::bus::match::rules::propertiesChanged(
                      PIPS_PATH, PIPS_INTERFACE),
                  [this](auto& msg) { this->ipsChanged(msg); }),
         defaultsUpdateMatch(
             utils::getBus(),
             sdbusplus::bus::match::rules::propertiesChangedNamespace(
                 "/xyz/openbmc_project/inventory", PMODE_DEFAULT_INTERFACE),
             [this](auto& msg) { this->defaultsReady(msg); }),
         masterOccSet(false), masterActive(false)
     {
         // restore Power Mode to DBus
         SysPwrMode currentMode;
         uint16_t oemModeData = 0;
         if (getMode(currentMode, oemModeData))
         {
             updateDbusMode(currentMode);
         }
         // restore Idle Power Saver parameters to DBus
         uint8_t enterUtil, exitUtil;
         uint16_t enterTime, exitTime;
         bool ipsEnabled;
         if (getIPSParms(ipsEnabled, enterUtil, enterTime, exitUtil, exitTime))
         {
             updateDbusIPS(ipsEnabled, enterUtil, enterTime, exitUtil, exitTime);
         }
     };

     /** @brief Initialize the persistent data with default values
      *
      * @return true if initialization completed
      */
     bool initPersistentData();

     /** @brief Set the current power mode property
      *
      * @param[in] newMode     - desired system power mode
      * @param[in] oemModeData - data required by some OEM Power Modes
      *
      * @return true if mode accepted
      */
     bool setMode(const SysPwrMode newMode, const uint16_t oemModeData);

     /** @brief Send mode change command to the master OCC
      *  @return SUCCESS on success
      */
     CmdStatus sendModeChange();

     /** @brief Send Idle Power Saver config data to the master OCC
      *  @return SUCCESS on success
      */
     CmdStatus sendIpsData();

     /** @brief Set the master OCC path
      *
      * @param[in]  occPath - hwmon path for master OCC
      */
     void setMasterOcc(const std::string& occPath);

     /** @brief Notify object of master OCC state.  If not acitve, no
      * commands will be sent to the master OCC
      *
      * @param[in]  isActive - true when master OCC is active
      */
     void setMasterActive(const bool isActive = true)
     {
         masterActive = isActive;
     };

   private:
     /** @brief OCC manager object */
     const Manager& manager;

     /** @brief Pass-through occ path on the bus */
     std::string path;

     /** @brief OCC instance number */
     int occInstance;

     /** @brief Object to send commands to the OCC */
     std::unique_ptr<open_power::occ::OccCommand> occCmd;

     /** @brief Used to subscribe to dbus pmode property changes **/
     sdbusplus::bus::match_t pmodeMatch;

     /** @brief Used to subscribe to dbus IPS property changes **/
     sdbusplus::bus::match_t ipsMatch;

     /** @brief Used to subscribe to dbus defaults property changes **/
     sdbusplus::bus::match_t defaultsUpdateMatch;

     OccPersistData persistedData;

     /** @brief True when the master OCC has been established */
     bool masterOccSet;

     /** @brief True when the master OCC is active */
     bool masterActive;

     /** @brief Callback for pmode setting changes
      *
      * Process change and inform OCC
      *
      * @param[in]  msg       - Data associated with pmode change signal
      *
      */
     void modeChanged(sdbusplus::message::message& msg);

     /** @brief Get the current power mode property
      *
      * @param[out] currentMode - current system power mode
      * @param[out] oemModeData - frequency data for some OEM mode
      *
      * @return true if data read successfully
      */
     bool getMode(SysPwrMode& currentMode, uint16_t& oemModeData);

     /** @brief Update the power mode property on DBus
      *
      * @param[in]  newMode - desired power mode
      *
      * @return true on success
      */
     bool updateDbusMode(const SysPwrMode newMode);

     /** @brief Callback for IPS setting changes
      *
      * Process change and inform OCC
      *
      * @param[in]  msg - Data associated with IPS change signal
      *
      */
     void ipsChanged(sdbusplus::message::message& msg);

     /** @brief Get the Idle Power Saver properties
      *
      *  @param[out] enabled - Idle Power Save status (true = enabled)
      *  @param[out] enterUtil - IPS Enter Utilization (%)
      *  @param[out] enterTime - IPS Enter Time (seconds)
      *  @param[out] exitUtil - IPS Exit Utilization (%)
      *  @param[out] exitTime - IPS Exit Time (seconds)
      *
      * @return true if data read successfully
      */
     bool getIPSParms(bool& enabled, uint8_t& enterUtil, uint16_t& enterTime,
                      uint8_t& exitUtil, uint16_t& exitTime);

     /** Update the Idle Power Saver data on DBus
      *
      *  @param[in] enabled - Idle Power Save status (true = enabled)
      *  @param[in] enterUtil - IPS Enter Utilization (%)
      *  @param[in] enterTime - IPS Enter Time (seconds)
      *  @param[in] exitUtil - IPS Exit Utilization (%)
      *  @param[in] exitTime - IPS Exit Time (seconds)
      *
      *  @return true if parameters were set successfully
      */
     bool updateDbusIPS(const bool enabled, const uint8_t enterUtil,
                        const uint16_t enterTime, const uint8_t exitUtil,
                        const uint16_t exitTime);

     /** @brief Callback for entity manager default changes
      *
      * Called when PowerModeProperties defaults are available
      */
     void defaultsReady(sdbusplus::message::message& msg);

     /** @brief Get the default power mode property for this system type
      *
      * @param[out] defaultMode - default system power mode
      *
      * @return true if data read successfully
      */
     bool getDefaultMode(SysPwrMode& defaultMode);

     /** @brief Get the default Idle Power Saver properties for this system type
      *
      *  @param[out] enabled - Idle Power Save status (true = enabled)
      *  @param[out] enterUtil - IPS Enter Utilization (%)
      *  @param[out] enterTime - IPS Enter Time (seconds)
      *  @param[out] exitUtil - IPS Exit Utilization (%)
      *  @param[out] exitTime - IPS Exit Time (seconds)
      *
      *  @return true if parameters were read successfully
      */
     bool getDefaultIPSParms(bool& enabled, uint8_t& enterUtil,
                             uint16_t& enterTime, uint8_t& exitUtil,
                             uint16_t& exitTime);

     /** @brief Read the default Idle Power Saver parameters and save them to the
      * DBUS so they will get used
      *
      * @return true if restore was successful
      */
     bool useDefaultIPSParms();
 };

 } // namespace powermode

 } // namespace occ

 } // namespace open_power
 #endif
	#pragma once

	#include "config.h"

	#ifdef POWER10
	#include "occ_command.hpp"

	#include <cereal/archives/json.hpp>
	//#include <cereal/archives/binary.hpp>
	#include <cereal/cereal.hpp>
	#include <cereal/types/string.hpp>
	#include <cereal/types/tuple.hpp>
	#include <cereal/types/vector.hpp>
	#include <sdbusplus/bus.hpp>
	#include <sdbusplus/bus/match.hpp>
	#include <xyz/openbmc_project/Control/Power/IdlePowerSaver/server.hpp>
	#include <xyz/openbmc_project/Control/Power/Mode/server.hpp>

	#include <filesystem>

	namespace open_power
	{
	namespace occ
	{

	class Manager;

	namespace powermode
	{
	namespace Base = sdbusplus::xyz::openbmc_project::Control::Power::server;
	using ModeInterface = sdbusplus::server::object::object<Base::Mode>;
	using IpsInterface = sdbusplus::server::object::object<Base::IdlePowerSaver>;
	using namespace std::literals::string_literals;

	constexpr auto PMODE_PATH = "/xyz/openbmc_project/control/host0/power_mode";
	constexpr auto PMODE_INTERFACE = "xyz.openbmc_project.Control.Power.Mode";
	constexpr auto POWER_MODE_PROP = "PowerMode";

	constexpr auto PIPS_PATH = "/xyz/openbmc_project/control/host0/power_ips";
	constexpr auto PIPS_INTERFACE =
	"xyz.openbmc_project.Control.Power.IdlePowerSaver";
	constexpr auto IPS_ENABLED_PROP = "Enabled";
	constexpr auto IPS_ENTER_UTIL = "EnterUtilizationPercent";
	constexpr auto IPS_ENTER_TIME = "EnterDwellTime";
	constexpr auto IPS_EXIT_UTIL = "ExitUtilizationPercent";
	constexpr auto IPS_EXIT_TIME = "ExitDwellTime";

	const auto PMODE_DEFAULT_INTERFACE =
	"xyz.openbmc_project.Configuration.PowerModeProperties"s;

	/** @brief Query the current Hypervisor target
	* @return true if the current Hypervisor target is PowerVM
	*/
	bool isPowerVM();

	/** @brief Convert power mode string to OCC SysPwrMode value
	*
	* @param[in] i_modeString - power mode string
	*
	* @return SysPwrMode or SysPwrMode::NO_CHANGE if not found
	*/
	SysPwrMode convertStringToMode(const std::string& i_modeString);

	struct PowerModeData
	{
	bool modeInitialized = false;
	SysPwrMode mode = SysPwrMode::NO_CHANGE;
	uint16_t oemModeData = 0x0000;
	bool ipsInitialized = false;
	bool ipsEnabled = true;
	uint8_t ipsEnterUtil = 0;
	uint16_t ipsEnterTime = 0;
	uint8_t ipsExitUtil = 0;
	uint16_t ipsExitTime = 0;

	/** @brief Function specifying data to archive for cereal.
	*/
	template <class Archive>
	void serialize(Archive& archive)
	{
	archive(modeInitialized, mode, oemModeData, ipsInitialized, ipsEnabled,
	ipsEnterUtil, ipsEnterTime, ipsExitUtil, ipsExitTime);
	}
	};

	/** @class OccPersistData
	* @brief Provides persistent container to store data for OCC
	*
	* Data is stored via cereal
	*/
	class OccPersistData
	{
	public:
	~OccPersistData() = default;
	OccPersistData(const OccPersistData&) = default;
	OccPersistData& operator=(const OccPersistData&) = default;
	OccPersistData(OccPersistData&&) = default;
	OccPersistData& operator=(OccPersistData&&) = default;

	/** @brief Loads any saved power mode data */
	OccPersistData()
	{
	load();
	}

	/** @brief Save Power Mode data to persistent file
	*
	* @param[in] newMode - desired System Power Mode
	* @param[in] oemModeData - data required by some OEM Power Modes
	*/
	void updateMode(const SysPwrMode newMode, const uint16_t oemModeData)
	{
	modeData.mode = newMode;
	modeData.oemModeData = oemModeData;
	modeData.modeInitialized = true;
	save();
	}

	/** @brief Write Idle Power Saver parameters to persistent file
	*
	* @param[in] enabled - Idle Power Save status (true = enabled)
	* @param[in] enterUtil - IPS Enter Utilization (%)
	* @param[in] enterTime - IPS Enter Time (seconds)
	* @param[in] exitUtil - IPS Exit Utilization (%)
	* @param[in] exitTime - IPS Exit Time (seconds)
	*/
	void updateIPS(const bool enabled, const uint8_t enterUtil,
	const uint16_t enterTime, const uint8_t exitUtil,
	const uint16_t exitTime)
	{
	modeData.ipsEnabled = enabled;
	modeData.ipsEnterUtil = enterUtil;
	modeData.ipsEnterTime = enterTime;
	modeData.ipsExitUtil = exitUtil;
	modeData.ipsExitTime = exitTime;
	modeData.ipsInitialized = true;
	save();
	}

	/** @brief Return the Power Mode and mode data
	*
	* @param[out] mode - current system power mode
	* @param[out] oemModeData - frequency data for some OEM mode
	*
	* @returns true if mode was available
	*/
	bool getMode(SysPwrMode& mode, uint16_t& oemModeData) const
	{
	if (!modeData.modeInitialized)
	{
	return false;
	}

	mode = modeData.mode;
	oemModeData = modeData.oemModeData;
	return true;
	}

	/** @brief Get the Idle Power Saver properties from DBus
	*
	* @param[out] enabled - Idle Power Save status (true = enabled)
	* @param[out] enterUtil - IPS Enter Utilization (%)
	* @param[out] enterTime - IPS Enter Time (seconds)
	* @param[out] exitUtil - IPS Exit Utilization (%)
	* @param[out] exitTime - IPS Exit Time (seconds)
	*
	* @return true if parameters were read successfully
	*/
	bool getIPS(bool& enabled, uint8_t& enterUtil, uint16_t& enterTime,
	uint8_t& exitUtil, uint16_t& exitTime)
	{
	if (!modeData.ipsInitialized)
	{
	return false;
	}

	enabled = modeData.ipsEnabled;
	enterUtil = modeData.ipsEnterUtil;
	enterTime = modeData.ipsEnterTime;
	exitUtil = modeData.ipsExitUtil;
	exitTime = modeData.ipsExitTime;
	return true;
	}

	/** @brief Return true if the power mode is available */
	bool modeAvailable()
	{
	return (modeData.modeInitialized);
	}

	/** @brief Return true if the IPS data is available */
	bool ipsAvailable()
	{
	return (modeData.ipsInitialized);
	}

	/** @brief Saves the Power Mode data in the filesystem using cereal. */
	void save();

	/** @brief Trace the Power Mode and IPS parameters. */
	void print();

	private:
	/** @brief Power Mode data filename to store persistent data */
	static constexpr auto powerModeFilename = "powerModeData";

	/** @brief Power Mode data object to be persisted */
	PowerModeData modeData;

	/** @brief Loads the OEM mode data in the filesystem using cereal. */
	void load();
	};

	/** @class PowerMode
	* @brief Monitors for changes to the power mode and notifies occ
	*
	* The customer power mode is provided to the OCC by host TMGT when the occ
	* first goes active or is reset. This code is responsible for sending
	* the power mode to the OCC if the mode is changed while the occ is active.
	*/

	class PowerMode : public ModeInterface, public IpsInterface
	{
	public:
	/** @brief PowerMode object to inform occ of changes to mode
	*
	* This object will monitor for changes to the power mode setting.
	* If a change is detected, and the occ is active, then this object will
	* notify the OCC of the change.
	*
	* @param[in] managerRef - manager object reference
	* @param[in] modePath - Power Mode dbus path
	* @param[in] ipsPath - Idle Power Saver dbus path
	*/
	explicit PowerMode(const Manager& managerRef, const char* modePath,
	const char* ipsPath) :
	ModeInterface(utils::getBus(), modePath, false),
	IpsInterface(utils::getBus(), ipsPath, false), manager(managerRef),
	pmodeMatch(utils::getBus(),
	sdbusplus::bus::match::rules::propertiesChanged(
	PMODE_PATH, PMODE_INTERFACE),
	[this](auto& msg) { this->modeChanged(msg); }),
	ipsMatch(utils::getBus(),
	sdbusplus::bus::match::rules::propertiesChanged(
	PIPS_PATH, PIPS_INTERFACE),
	[this](auto& msg) { this->ipsChanged(msg); }),
	defaultsUpdateMatch(
	utils::getBus(),
	sdbusplus::bus::match::rules::propertiesChangedNamespace(
	"/xyz/openbmc_project/inventory", PMODE_DEFAULT_INTERFACE),
	[this](auto& msg) { this->defaultsReady(msg); }),
	masterOccSet(false), masterActive(false)
	{
	// restore Power Mode to DBus
	SysPwrMode currentMode;
	uint16_t oemModeData = 0;
	if (getMode(currentMode, oemModeData))
	{
	updateDbusMode(currentMode);
	}
	// restore Idle Power Saver parameters to DBus
	uint8_t enterUtil, exitUtil;
	uint16_t enterTime, exitTime;
	bool ipsEnabled;
	if (getIPSParms(ipsEnabled, enterUtil, enterTime, exitUtil, exitTime))
	{
	updateDbusIPS(ipsEnabled, enterUtil, enterTime, exitUtil, exitTime);
	}
	};

	/** @brief Initialize the persistent data with default values
	*
	* @return true if initialization completed
	*/
	bool initPersistentData();

	/** @brief Set the current power mode property
	*
	* @param[in] newMode - desired system power mode
	* @param[in] oemModeData - data required by some OEM Power Modes
	*
	* @return true if mode accepted
	*/
	bool setMode(const SysPwrMode newMode, const uint16_t oemModeData);

	/** @brief Send mode change command to the master OCC
	* @return SUCCESS on success
	*/
	CmdStatus sendModeChange();

	/** @brief Send Idle Power Saver config data to the master OCC
	* @return SUCCESS on success
	*/
	CmdStatus sendIpsData();

	/** @brief Set the master OCC path
	*
	* @param[in] occPath - hwmon path for master OCC
	*/
	void setMasterOcc(const std::string& occPath);

	/** @brief Notify object of master OCC state. If not acitve, no
	* commands will be sent to the master OCC
	*
	* @param[in] isActive - true when master OCC is active
	*/
	void setMasterActive(const bool isActive = true)
	{
	masterActive = isActive;
	};

	private:
	/** @brief OCC manager object */
	const Manager& manager;

	/** @brief Pass-through occ path on the bus */
	std::string path;

	/** @brief OCC instance number */
	int occInstance;

	/** @brief Object to send commands to the OCC */
	std::unique_ptr<open_power::occ::OccCommand> occCmd;

	/ @brief Used to subscribe to dbus pmode property changes /
	sdbusplus::bus::match_t pmodeMatch;

	/ @brief Used to subscribe to dbus IPS property changes /
	sdbusplus::bus::match_t ipsMatch;

	/ @brief Used to subscribe to dbus defaults property changes /
	sdbusplus::bus::match_t defaultsUpdateMatch;

	OccPersistData persistedData;

	/** @brief True when the master OCC has been established */
	bool masterOccSet;

	/** @brief True when the master OCC is active */
	bool masterActive;

	/** @brief Callback for pmode setting changes
	*
	* Process change and inform OCC
	*
	* @param[in] msg - Data associated with pmode change signal
	*
	*/
	void modeChanged(sdbusplus::message::message& msg);

	/** @brief Get the current power mode property
	*
	* @param[out] currentMode - current system power mode
	* @param[out] oemModeData - frequency data for some OEM mode
	*
	* @return true if data read successfully
	*/
	bool getMode(SysPwrMode& currentMode, uint16_t& oemModeData);

	/** @brief Update the power mode property on DBus
	*
	* @param[in] newMode - desired power mode
	*
	* @return true on success
	*/
	bool updateDbusMode(const SysPwrMode newMode);

	/** @brief Callback for IPS setting changes
	*
	* Process change and inform OCC
	*
	* @param[in] msg - Data associated with IPS change signal
	*
	*/
	void ipsChanged(sdbusplus::message::message& msg);

	/** @brief Get the Idle Power Saver properties
	*
	* @param[out] enabled - Idle Power Save status (true = enabled)
	* @param[out] enterUtil - IPS Enter Utilization (%)
	* @param[out] enterTime - IPS Enter Time (seconds)
	* @param[out] exitUtil - IPS Exit Utilization (%)
	* @param[out] exitTime - IPS Exit Time (seconds)
	*
	* @return true if data read successfully
	*/
	bool getIPSParms(bool& enabled, uint8_t& enterUtil, uint16_t& enterTime,
	uint8_t& exitUtil, uint16_t& exitTime);

	/** Update the Idle Power Saver data on DBus
	*
	* @param[in] enabled - Idle Power Save status (true = enabled)
	* @param[in] enterUtil - IPS Enter Utilization (%)
	* @param[in] enterTime - IPS Enter Time (seconds)
	* @param[in] exitUtil - IPS Exit Utilization (%)
	* @param[in] exitTime - IPS Exit Time (seconds)
	*
	* @return true if parameters were set successfully
	*/
	bool updateDbusIPS(const bool enabled, const uint8_t enterUtil,
	const uint16_t enterTime, const uint8_t exitUtil,
	const uint16_t exitTime);

	/** @brief Callback for entity manager default changes
	*
	* Called when PowerModeProperties defaults are available
	*/
	void defaultsReady(sdbusplus::message::message& msg);

	/** @brief Get the default power mode property for this system type
	*
	* @param[out] defaultMode - default system power mode
	*
	* @return true if data read successfully
	*/
	bool getDefaultMode(SysPwrMode& defaultMode);

	/** @brief Get the default Idle Power Saver properties for this system type
	*
	* @param[out] enabled - Idle Power Save status (true = enabled)
	* @param[out] enterUtil - IPS Enter Utilization (%)
	* @param[out] enterTime - IPS Enter Time (seconds)
	* @param[out] exitUtil - IPS Exit Utilization (%)
	* @param[out] exitTime - IPS Exit Time (seconds)
	*
	* @return true if parameters were read successfully
	*/
	bool getDefaultIPSParms(bool& enabled, uint8_t& enterUtil,
	uint16_t& enterTime, uint8_t& exitUtil,
	uint16_t& exitTime);

	/** @brief Read the default Idle Power Saver parameters and save them to the
	* DBUS so they will get used
	*
	* @return true if restore was successful
	*/
	bool useDefaultIPSParms();
	};

	} // namespace powermode

	} // namespace occ

	} // namespace open_power
	#endif