Add meta-xilinx subtree
Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.
Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts
new file mode 100644
index 0000000..45e488c
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/kc705-microblazeel/kc705-microblazeel.dts
@@ -0,0 +1,56 @@
+/dts-v1/;
+/include/ "pl.dtsi"
+/include/ "system-conf.dtsi"
+/ {
+ hard-reset-gpios = <&reset_gpio 0 1>;
+ aliases {
+ ethernet0 = &axi_ethernet;
+ i2c0 = &iic_main;
+ serial0 = &rs232_uart;
+ };
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&iic_main {
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ };
+};
+
+&axi_ethernet {
+ phy-handle = <&phy0>;
+ axi_ethernet_mdio: mdio {
+ phy0: phy@7 {
+ device_type = "ethernet-phy";
+ reg = <7>;
+ };
+ };
+};