import-layers/yocto-poky/meta/classes/testimage.bbclass - openbmc/owners-plugin-test - Gitiles

 # Copyright (C) 2013 Intel Corporation
 #
 # Released under the MIT license (see COPYING.MIT)


 # testimage.bbclass enables testing of qemu images using python unittests.
 # Most of the tests are commands run on target image over ssh.
 # To use it add testimage to global inherit and call your target image with -c testimage
 # You can try it out like this:
 # - first build a qemu core-image-sato
 # - add INHERIT += "testimage" in local.conf
 # - then bitbake core-image-sato -c testimage. That will run a standard suite of tests.

 # You can set (or append to) TEST_SUITES in local.conf to select the tests
 # which you want to run for your target.
 # The test names are the module names in meta/lib/oeqa/runtime.
 # Each name in TEST_SUITES represents a required test for the image. (no skipping allowed)
 # Appending "auto" means that it will try to run all tests that are suitable for the image (each test decides that on it's own).
 # Note that order in TEST_SUITES is relevant: tests are run in an order such that
 # tests mentioned in @skipUnlessPassed run before the tests that depend on them,
 # but without such dependencies, tests run in the order in which they are listed
 # in TEST_SUITES.
 #
 # A layer can add its own tests in lib/oeqa/runtime, provided it extends BBPATH as normal in its layer.conf.

 # TEST_LOG_DIR contains a command ssh log and may contain infromation about what command is running, output and return codes and for qemu a boot log till login.
 # Booting is handled by this class, and it's not a test in itself.
 # TEST_QEMUBOOT_TIMEOUT can be used to set the maximum time in seconds the launch code will wait for the login prompt.

 TEST_LOG_DIR ?= "${WORKDIR}/testimage"

 TEST_EXPORT_DIR ?= "${TMPDIR}/testimage/${PN}"
 TEST_EXPORT_ONLY ?= "0"

 RPMTESTSUITE = "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'smart rpm', '', d)}"
 MINTESTSUITE = "ping"
 NETTESTSUITE = "${MINTESTSUITE} ssh df date scp syslog"
 DEVTESTSUITE = "gcc kernelmodule ldd"

 DEFAULT_TEST_SUITES = "${MINTESTSUITE} auto"
 DEFAULT_TEST_SUITES_pn-core-image-minimal = "${MINTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-minimal-dev = "${MINTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-full-cmdline = "${NETTESTSUITE} perl python logrotate"
 DEFAULT_TEST_SUITES_pn-core-image-x11 = "${MINTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-lsb = "${NETTESTSUITE} pam parselogs ${RPMTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-sato = "${NETTESTSUITE} connman xorg parselogs ${RPMTESTSUITE} \
     ${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'python', '', d)}"
 DEFAULT_TEST_SUITES_pn-core-image-sato-sdk = "${NETTESTSUITE} connman xorg perl python \
     ${DEVTESTSUITE} parselogs ${RPMTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-lsb-dev = "${NETTESTSUITE} pam perl python parselogs ${RPMTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-core-image-lsb-sdk = "${NETTESTSUITE} buildcvs buildiptables buildsudoku \
     connman ${DEVTESTSUITE} pam perl python parselogs ${RPMTESTSUITE}"
 DEFAULT_TEST_SUITES_pn-meta-toolchain = "auto"

 # aarch64 has no graphics
 DEFAULT_TEST_SUITES_remove_aarch64 = "xorg"

 #qemumips is too slow for buildsudoku
 DEFAULT_TEST_SUITES_remove_qemumips = "buildsudoku"

 TEST_SUITES ?= "${DEFAULT_TEST_SUITES}"

 TEST_QEMUBOOT_TIMEOUT ?= "1000"
 TEST_TARGET ?= "qemu"
 TEST_TARGET_IP ?= ""
 TEST_SERVER_IP ?= ""

 TESTIMAGEDEPENDS = ""
 TESTIMAGEDEPENDS_qemuall = "qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot"

 TESTIMAGELOCK = "${TMPDIR}/testimage.lock"
 TESTIMAGELOCK_qemuall = ""

 TESTIMAGE_DUMP_DIR ?= "/tmp/oe-saved-tests/"

 testimage_dump_target () {
     top -bn1
     ps
     free
     df
     # The next command will export the default gateway IP
     export DEFAULT_GATEWAY=$(ip route | awk '/default/ { print $3}')
     ping -c3 $DEFAULT_GATEWAY
     dmesg
     netstat -an
     ip address
     # Next command will dump logs from /var/log/
     find /var/log/ -type f 2>/dev/null -exec echo "====================" \; -exec echo {} \; -exec echo "====================" \; -exec cat {} \; -exec echo "" \;
 }

 testimage_dump_host () {
     top -bn1
     iostat -x -z -N -d -p ALL 20 2
     ps -ef
     free
     df
     memstat
     dmesg
     ip -s link
     netstat -an
 }

 python do_testimage() {
     testimage_main(d)
 }
 addtask testimage
 do_testimage[nostamp] = "1"
 do_testimage[depends] += "${TESTIMAGEDEPENDS}"
 do_testimage[lockfiles] += "${TESTIMAGELOCK}"

 def exportTests(d,tc):
     import json
     import shutil
     import pkgutil
     import re

     exportpath = d.getVar("TEST_EXPORT_DIR", True)

     savedata = {}
     savedata["d"] = {}
     savedata["target"] = {}
     savedata["host_dumper"] = {}
     for key in tc.__dict__:
         # special cases
         if key not in ['d', 'target', 'host_dumper', 'suite']:
             savedata[key] = getattr(tc, key)
     savedata["target"]["ip"] = tc.target.ip or d.getVar("TEST_TARGET_IP", True)
     savedata["target"]["server_ip"] = tc.target.server_ip or d.getVar("TEST_SERVER_IP", True)

     keys = [ key for key in d.keys() if not key.startswith("_") and not key.startswith("BB") \
             and not key.startswith("B_pn") and not key.startswith("do_") and not d.getVarFlag(key, "func", True)]
     for key in keys:
         try:
             savedata["d"][key] = d.getVar(key, True)
         except bb.data_smart.ExpansionError:
             # we don't care about those anyway
             pass

     savedata["host_dumper"]["parent_dir"] = tc.host_dumper.parent_dir
     savedata["host_dumper"]["cmds"] = tc.host_dumper.cmds

     json_file = os.path.join(exportpath, "testdata.json")
     with open(json_file, "w") as f:
             json.dump(savedata, f, skipkeys=True, indent=4, sort_keys=True)

     # Replace absolute path with relative in the file
     exclude_path = os.path.join(d.getVar("COREBASE", True),'meta','lib','oeqa')
     f1 = open(json_file,'r').read()
     f2 = open(json_file,'w')
     m = f1.replace(exclude_path,'oeqa')
     f2.write(m)
     f2.close()

     # now start copying files
     # we'll basically copy everything under meta/lib/oeqa, with these exceptions
     #  - oeqa/targetcontrol.py - not needed
     #  - oeqa/selftest - something else
     # That means:
     #   - all tests from oeqa/runtime defined in TEST_SUITES (including from other layers)
     #   - the contents of oeqa/utils and oeqa/runtime/files
     #   - oeqa/oetest.py and oeqa/runexport.py (this will get copied to exportpath not exportpath/oeqa)
     #   - __init__.py files
     bb.utils.mkdirhier(os.path.join(exportpath, "oeqa/runtime/files"))
     bb.utils.mkdirhier(os.path.join(exportpath, "oeqa/utils"))
     # copy test modules, this should cover tests in other layers too
     bbpath = d.getVar("BBPATH", True).split(':')
     for t in tc.testslist:
         isfolder = False
         if re.search("\w+\.\w+\.test_\S+", t):
             t = '.'.join(t.split('.')[:3])
         mod = pkgutil.get_loader(t)
         # More depth than usual?
         if (t.count('.') > 2):
             for p in bbpath:
                 foldername = os.path.join(p, 'lib',  os.sep.join(t.split('.')).rsplit(os.sep, 1)[0])
                 if os.path.isdir(foldername):
                     isfolder = True
                     target_folder = os.path.join(exportpath, "oeqa", "runtime", os.path.basename(foldername))
                     if not os.path.exists(target_folder):
                         shutil.copytree(foldername, target_folder)
         if not isfolder:
             shutil.copy2(mod.filename, os.path.join(exportpath, "oeqa/runtime"))
     # copy __init__.py files
     oeqadir = pkgutil.get_loader("oeqa").filename
     shutil.copy2(os.path.join(oeqadir, "__init__.py"), os.path.join(exportpath, "oeqa"))
     shutil.copy2(os.path.join(oeqadir, "runtime/__init__.py"), os.path.join(exportpath, "oeqa/runtime"))
     # copy oeqa/oetest.py and oeqa/runexported.py
     shutil.copy2(os.path.join(oeqadir, "oetest.py"), os.path.join(exportpath, "oeqa"))
     shutil.copy2(os.path.join(oeqadir, "runexported.py"), exportpath)
     # copy oeqa/utils/*.py
     for root, dirs, files in os.walk(os.path.join(oeqadir, "utils")):
         for f in files:
             if f.endswith(".py"):
                 shutil.copy2(os.path.join(root, f), os.path.join(exportpath, "oeqa/utils"))
     # copy oeqa/runtime/files/*
     for root, dirs, files in os.walk(os.path.join(oeqadir, "runtime/files")):
         for f in files:
             shutil.copy2(os.path.join(root, f), os.path.join(exportpath, "oeqa/runtime/files"))

     bb.plain("Exported tests to: %s" % exportpath)

 def testimage_main(d):
     import unittest
     import os
     import oeqa.runtime
     import time
     import signal
     from oeqa.oetest import ImageTestContext
     from oeqa.targetcontrol import get_target_controller
     from oeqa.utils.dump import get_host_dumper

     pn = d.getVar("PN", True)
     export = oe.utils.conditional("TEST_EXPORT_ONLY", "1", True, False, d)
     bb.utils.mkdirhier(d.getVar("TEST_LOG_DIR", True))
     if export:
         bb.utils.remove(d.getVar("TEST_EXPORT_DIR", True), recurse=True)
         bb.utils.mkdirhier(d.getVar("TEST_EXPORT_DIR", True))

     # we need the host dumper in test context
     host_dumper = get_host_dumper(d)

     # the robot dance
     target = get_target_controller(d)

     # test context
     tc = ImageTestContext(d, target, host_dumper)

     # this is a dummy load of tests
     # we are doing that to find compile errors in the tests themselves
     # before booting the image
     try:
         tc.loadTests()
     except Exception as e:
         import traceback
         bb.fatal("Loading tests failed:\n%s" % traceback.format_exc())

     if export:
         signal.signal(signal.SIGTERM, tc.origsigtermhandler)
         tc.origsigtermhandler = None
         exportTests(d,tc)
     else:
         target.deploy()
         try:
             target.start()
             starttime = time.time()
             result = tc.runTests()
             stoptime = time.time()
             if result.wasSuccessful():
                 bb.plain("%s - Ran %d test%s in %.3fs" % (pn, result.testsRun, result.testsRun != 1 and "s" or "", stoptime - starttime))
                 msg = "%s - OK - All required tests passed" % pn
                 skipped = len(result.skipped)
                 if skipped:
                     msg += " (skipped=%d)" % skipped
                 bb.plain(msg)
             else:
                 raise bb.build.FuncFailed("%s - FAILED - check the task log and the ssh log" % pn )
         finally:
             signal.signal(signal.SIGTERM, tc.origsigtermhandler)
             target.stop()

 testimage_main[vardepsexclude] =+ "BB_ORIGENV"

 inherit testsdk
	# Copyright (C) 2013 Intel Corporation
	#
	# Released under the MIT license (see COPYING.MIT)


	# testimage.bbclass enables testing of qemu images using python unittests.
	# Most of the tests are commands run on target image over ssh.
	# To use it add testimage to global inherit and call your target image with -c testimage
	# You can try it out like this:
	# - first build a qemu core-image-sato
	# - add INHERIT += "testimage" in local.conf
	# - then bitbake core-image-sato -c testimage. That will run a standard suite of tests.

	# You can set (or append to) TEST_SUITES in local.conf to select the tests
	# which you want to run for your target.
	# The test names are the module names in meta/lib/oeqa/runtime.
	# Each name in TEST_SUITES represents a required test for the image. (no skipping allowed)
	# Appending "auto" means that it will try to run all tests that are suitable for the image (each test decides that on it's own).
	# Note that order in TEST_SUITES is relevant: tests are run in an order such that
	# tests mentioned in @skipUnlessPassed run before the tests that depend on them,
	# but without such dependencies, tests run in the order in which they are listed
	# in TEST_SUITES.
	#
	# A layer can add its own tests in lib/oeqa/runtime, provided it extends BBPATH as normal in its layer.conf.

	# TEST_LOG_DIR contains a command ssh log and may contain infromation about what command is running, output and return codes and for qemu a boot log till login.
	# Booting is handled by this class, and it's not a test in itself.
	# TEST_QEMUBOOT_TIMEOUT can be used to set the maximum time in seconds the launch code will wait for the login prompt.

	TEST_LOG_DIR ?= "${WORKDIR}/testimage"

	TEST_EXPORT_DIR ?= "${TMPDIR}/testimage/${PN}"
	TEST_EXPORT_ONLY ?= "0"

	RPMTESTSUITE = "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'smart rpm', '', d)}"
	MINTESTSUITE = "ping"
	NETTESTSUITE = "${MINTESTSUITE} ssh df date scp syslog"
	DEVTESTSUITE = "gcc kernelmodule ldd"

	DEFAULT_TEST_SUITES = "${MINTESTSUITE} auto"
	DEFAULT_TEST_SUITES_pn-core-image-minimal = "${MINTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-minimal-dev = "${MINTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-full-cmdline = "${NETTESTSUITE} perl python logrotate"
	DEFAULT_TEST_SUITES_pn-core-image-x11 = "${MINTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-lsb = "${NETTESTSUITE} pam parselogs ${RPMTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-sato = "${NETTESTSUITE} connman xorg parselogs ${RPMTESTSUITE} \
	${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'python', '', d)}"
	DEFAULT_TEST_SUITES_pn-core-image-sato-sdk = "${NETTESTSUITE} connman xorg perl python \
	${DEVTESTSUITE} parselogs ${RPMTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-lsb-dev = "${NETTESTSUITE} pam perl python parselogs ${RPMTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-core-image-lsb-sdk = "${NETTESTSUITE} buildcvs buildiptables buildsudoku \
	connman ${DEVTESTSUITE} pam perl python parselogs ${RPMTESTSUITE}"
	DEFAULT_TEST_SUITES_pn-meta-toolchain = "auto"

	# aarch64 has no graphics
	DEFAULT_TEST_SUITES_remove_aarch64 = "xorg"

	#qemumips is too slow for buildsudoku
	DEFAULT_TEST_SUITES_remove_qemumips = "buildsudoku"

	TEST_SUITES ?= "${DEFAULT_TEST_SUITES}"

	TEST_QEMUBOOT_TIMEOUT ?= "1000"
	TEST_TARGET ?= "qemu"
	TEST_TARGET_IP ?= ""
	TEST_SERVER_IP ?= ""

	TESTIMAGEDEPENDS = ""
	TESTIMAGEDEPENDS_qemuall = "qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot"

	TESTIMAGELOCK = "${TMPDIR}/testimage.lock"
	TESTIMAGELOCK_qemuall = ""

	TESTIMAGE_DUMP_DIR ?= "/tmp/oe-saved-tests/"

	testimage_dump_target () {
	top -bn1
	ps
	free
	df
	# The next command will export the default gateway IP
	export DEFAULT_GATEWAY=$(ip route \| awk '/default/ { print $3}')
	ping -c3 $DEFAULT_GATEWAY
	dmesg
	netstat -an
	ip address
	# Next command will dump logs from /var/log/
	find /var/log/ -type f 2>/dev/null -exec echo "====================" \; -exec echo {} \; -exec echo "====================" \; -exec cat {} \; -exec echo "" \;
	}

	testimage_dump_host () {
	top -bn1
	iostat -x -z -N -d -p ALL 20 2
	ps -ef
	free
	df
	memstat
	dmesg
	ip -s link
	netstat -an
	}

	python do_testimage() {
	testimage_main(d)
	}
	addtask testimage
	do_testimage[nostamp] = "1"
	do_testimage[depends] += "${TESTIMAGEDEPENDS}"
	do_testimage[lockfiles] += "${TESTIMAGELOCK}"

	def exportTests(d,tc):
	import json
	import shutil
	import pkgutil
	import re

	exportpath = d.getVar("TEST_EXPORT_DIR", True)

	savedata = {}
	savedata["d"] = {}
	savedata["target"] = {}
	savedata["host_dumper"] = {}
	for key in tc.__dict__:
	# special cases
	if key not in ['d', 'target', 'host_dumper', 'suite']:
	savedata[key] = getattr(tc, key)
	savedata["target"]["ip"] = tc.target.ip or d.getVar("TEST_TARGET_IP", True)
	savedata["target"]["server_ip"] = tc.target.server_ip or d.getVar("TEST_SERVER_IP", True)

	keys = [ key for key in d.keys() if not key.startswith("_") and not key.startswith("BB") \
	and not key.startswith("B_pn") and not key.startswith("do_") and not d.getVarFlag(key, "func", True)]
	for key in keys:
	try:
	savedata["d"][key] = d.getVar(key, True)
	except bb.data_smart.ExpansionError:
	# we don't care about those anyway
	pass

	savedata["host_dumper"]["parent_dir"] = tc.host_dumper.parent_dir
	savedata["host_dumper"]["cmds"] = tc.host_dumper.cmds

	json_file = os.path.join(exportpath, "testdata.json")
	with open(json_file, "w") as f:
	json.dump(savedata, f, skipkeys=True, indent=4, sort_keys=True)

	# Replace absolute path with relative in the file
	exclude_path = os.path.join(d.getVar("COREBASE", True),'meta','lib','oeqa')
	f1 = open(json_file,'r').read()
	f2 = open(json_file,'w')
	m = f1.replace(exclude_path,'oeqa')
	f2.write(m)
	f2.close()

	# now start copying files
	# we'll basically copy everything under meta/lib/oeqa, with these exceptions
	# - oeqa/targetcontrol.py - not needed
	# - oeqa/selftest - something else
	# That means:
	# - all tests from oeqa/runtime defined in TEST_SUITES (including from other layers)
	# - the contents of oeqa/utils and oeqa/runtime/files
	# - oeqa/oetest.py and oeqa/runexport.py (this will get copied to exportpath not exportpath/oeqa)
	# - __init__.py files
	bb.utils.mkdirhier(os.path.join(exportpath, "oeqa/runtime/files"))
	bb.utils.mkdirhier(os.path.join(exportpath, "oeqa/utils"))
	# copy test modules, this should cover tests in other layers too
	bbpath = d.getVar("BBPATH", True).split(':')
	for t in tc.testslist:
	isfolder = False
	if re.search("\w+\.\w+\.test_\S+", t):
	t = '.'.join(t.split('.')[:3])
	mod = pkgutil.get_loader(t)
	# More depth than usual?
	if (t.count('.') > 2):
	for p in bbpath:
	foldername = os.path.join(p, 'lib', os.sep.join(t.split('.')).rsplit(os.sep, 1)[0])
	if os.path.isdir(foldername):
	isfolder = True
	target_folder = os.path.join(exportpath, "oeqa", "runtime", os.path.basename(foldername))
	if not os.path.exists(target_folder):
	shutil.copytree(foldername, target_folder)
	if not isfolder:
	shutil.copy2(mod.filename, os.path.join(exportpath, "oeqa/runtime"))
	# copy __init__.py files
	oeqadir = pkgutil.get_loader("oeqa").filename
	shutil.copy2(os.path.join(oeqadir, "__init__.py"), os.path.join(exportpath, "oeqa"))
	shutil.copy2(os.path.join(oeqadir, "runtime/__init__.py"), os.path.join(exportpath, "oeqa/runtime"))
	# copy oeqa/oetest.py and oeqa/runexported.py
	shutil.copy2(os.path.join(oeqadir, "oetest.py"), os.path.join(exportpath, "oeqa"))
	shutil.copy2(os.path.join(oeqadir, "runexported.py"), exportpath)
	# copy oeqa/utils/*.py
	for root, dirs, files in os.walk(os.path.join(oeqadir, "utils")):
	for f in files:
	if f.endswith(".py"):
	shutil.copy2(os.path.join(root, f), os.path.join(exportpath, "oeqa/utils"))
	# copy oeqa/runtime/files/*
	for root, dirs, files in os.walk(os.path.join(oeqadir, "runtime/files")):
	for f in files:
	shutil.copy2(os.path.join(root, f), os.path.join(exportpath, "oeqa/runtime/files"))

	bb.plain("Exported tests to: %s" % exportpath)

	def testimage_main(d):
	import unittest
	import os
	import oeqa.runtime
	import time
	import signal
	from oeqa.oetest import ImageTestContext
	from oeqa.targetcontrol import get_target_controller
	from oeqa.utils.dump import get_host_dumper

	pn = d.getVar("PN", True)
	export = oe.utils.conditional("TEST_EXPORT_ONLY", "1", True, False, d)
	bb.utils.mkdirhier(d.getVar("TEST_LOG_DIR", True))
	if export:
	bb.utils.remove(d.getVar("TEST_EXPORT_DIR", True), recurse=True)
	bb.utils.mkdirhier(d.getVar("TEST_EXPORT_DIR", True))

	# we need the host dumper in test context
	host_dumper = get_host_dumper(d)

	# the robot dance
	target = get_target_controller(d)

	# test context
	tc = ImageTestContext(d, target, host_dumper)

	# this is a dummy load of tests
	# we are doing that to find compile errors in the tests themselves
	# before booting the image
	try:
	tc.loadTests()
	except Exception as e:
	import traceback
	bb.fatal("Loading tests failed:\n%s" % traceback.format_exc())

	if export:
	signal.signal(signal.SIGTERM, tc.origsigtermhandler)
	tc.origsigtermhandler = None
	exportTests(d,tc)
	else:
	target.deploy()
	try:
	target.start()
	starttime = time.time()
	result = tc.runTests()
	stoptime = time.time()
	if result.wasSuccessful():
	bb.plain("%s - Ran %d test%s in %.3fs" % (pn, result.testsRun, result.testsRun != 1 and "s" or "", stoptime - starttime))
	msg = "%s - OK - All required tests passed" % pn
	skipped = len(result.skipped)
	if skipped:
	msg += " (skipped=%d)" % skipped
	bb.plain(msg)
	else:
	raise bb.build.FuncFailed("%s - FAILED - check the task log and the ssh log" % pn )
	finally:
	signal.signal(signal.SIGTERM, tc.origsigtermhandler)
	target.stop()

	testimage_main[vardepsexclude] =+ "BB_ORIGENV"

	inherit testsdk