| /* |
| // Copyright (c) 2019 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include "peci_pcie.hpp" |
| |
| #include "pciDeviceClass.hpp" |
| #include "pciVendors.hpp" |
| |
| #include <boost/asio/io_service.hpp> |
| #include <boost/asio/steady_timer.hpp> |
| #include <boost/container/flat_map.hpp> |
| #include <boost/container/flat_set.hpp> |
| #include <sdbusplus/asio/object_server.hpp> |
| #include <sdbusplus/bus/match.hpp> |
| |
| #include <iomanip> |
| #include <iostream> |
| #include <set> |
| #include <sstream> |
| #include <unordered_set> |
| |
| namespace peci_pcie |
| { |
| static boost::container::flat_map< |
| int, boost::container::flat_map< |
| int, boost::container::flat_map< |
| int, std::shared_ptr<sdbusplus::asio::dbus_interface>>>> |
| pcieDeviceDBusMap; |
| |
| static bool abortScan; |
| static bool scanInProgress; |
| |
| namespace function |
| { |
| static constexpr char const* functionTypeName = "FunctionType"; |
| static constexpr char const* deviceClassName = "DeviceClass"; |
| static constexpr char const* vendorIdName = "VendorId"; |
| static constexpr char const* deviceIdName = "DeviceId"; |
| static constexpr char const* classCodeName = "ClassCode"; |
| static constexpr char const* revisionIdName = "RevisionId"; |
| static constexpr char const* subsystemIdName = "SubsystemId"; |
| static constexpr char const* subsystemVendorIdName = "SubsystemVendorId"; |
| } // namespace function |
| |
| static constexpr const std::array pciConfigInfo{ |
| std::tuple<const char*, int, int>{function::functionTypeName, -1, -1}, |
| std::tuple<const char*, int, int>{function::deviceClassName, -1, -1}, |
| std::tuple<const char*, int, int>{function::vendorIdName, 0, 2}, |
| std::tuple<const char*, int, int>{function::deviceIdName, 2, 2}, |
| std::tuple<const char*, int, int>{function::classCodeName, 9, 3}, |
| std::tuple<const char*, int, int>{function::revisionIdName, 8, 1}, |
| std::tuple<const char*, int, int>{function::subsystemIdName, 0x2e, 2}, |
| std::tuple<const char*, int, int>{function::subsystemVendorIdName, 0x2c, |
| 2}}; |
| } // namespace peci_pcie |
| |
| enum class resCode |
| { |
| resOk, |
| resSkip, |
| resErr |
| }; |
| |
| struct CPUInfo |
| { |
| size_t addr; |
| bool skipCpuBuses; |
| boost::container::flat_set<size_t> cpuBusNums; |
| }; |
| |
| // PECI Client Address Map |
| static resCode getCPUBusMap(std::vector<CPUInfo>& cpuInfo) |
| { |
| cpuInfo.clear(); |
| for (size_t addr = MIN_CLIENT_ADDR; addr <= MAX_CLIENT_ADDR; addr++) |
| { |
| if (peci_Ping(addr) != PECI_CC_SUCCESS) |
| { |
| continue; |
| } |
| |
| auto& cpu = cpuInfo.emplace_back(CPUInfo{addr, false, {}}); |
| uint8_t cc = 0; |
| CPUModel model{}; |
| uint8_t stepping = 0; |
| if (peci_GetCPUID(addr, &model, &stepping, &cc) != PECI_CC_SUCCESS) |
| { |
| std::cerr << "Cannot get CPUID!\n"; |
| return resCode::resErr; |
| } |
| |
| switch (model) |
| { |
| case skx: |
| { |
| // Get the assigned CPU bus numbers from CPUBUSNO and CPUBUSNO1 |
| // (B(0) D8 F2 offsets CCh and D0h) |
| uint32_t cpuBusNum = 0; |
| if (peci_RdPCIConfigLocal(addr, 0, 8, 2, 0xCC, 4, |
| (uint8_t*)&cpuBusNum, |
| &cc) != PECI_CC_SUCCESS) |
| { |
| return resCode::resErr; |
| } |
| uint32_t cpuBusNum1 = 0; |
| if (peci_RdPCIConfigLocal(addr, 0, 8, 2, 0xD0, 4, |
| (uint8_t*)&cpuBusNum1, |
| &cc) != PECI_CC_SUCCESS) |
| { |
| return resCode::resErr; |
| } |
| |
| // Add the CPU bus numbers to the set for this CPU |
| while (cpuBusNum) |
| { |
| // Get the LSB |
| size_t busNum = cpuBusNum & 0xFF; |
| cpu.cpuBusNums.insert(busNum); |
| // Shift right by one byte |
| cpuBusNum >>= 8; |
| } |
| while (cpuBusNum1) |
| { |
| // Get the LSB |
| size_t busNum = cpuBusNum1 & 0xFF; |
| cpu.cpuBusNums.insert(busNum); |
| // Shift right by one byte |
| cpuBusNum1 >>= 8; |
| } |
| cpu.skipCpuBuses = true; |
| } |
| } |
| } |
| return cpuInfo.empty() ? resCode::resErr : resCode::resOk; |
| } |
| |
| static bool isPECIAvailable(void) |
| { |
| for (size_t i = MIN_CLIENT_ADDR; i <= MAX_CLIENT_ADDR; i++) |
| { |
| if (peci_Ping(i) == PECI_CC_SUCCESS) |
| { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static resCode getDataFromPCIeConfig(const int& clientAddr, const int& bus, |
| const int& dev, const int& func, |
| const int& offset, const int& size, |
| uint32_t& pciData) |
| { |
| // PECI RdPCIConfig() currently only supports 4 byte reads, so adjust |
| // the offset and size to get the right data |
| static constexpr const int pciReadSize = 4; |
| int mod = offset % pciReadSize; |
| int pciOffset = offset - mod; |
| if (mod + size > pciReadSize) |
| { |
| return resCode::resErr; |
| } |
| |
| std::array<uint8_t, pciReadSize> data; |
| uint8_t cc; |
| int ret = PECI_CC_TIMEOUT; |
| for (int index = 0; (index < 5) && (ret == PECI_CC_TIMEOUT); index++) |
| { |
| #ifdef USE_RDENDPOINTCFG |
| ret = peci_RdEndPointConfigPci(clientAddr, // CPU Address |
| 0, // PCI Seg (use 0 for now) |
| bus, // PCI Bus |
| dev, // PCI Device |
| func, // PCI Function |
| pciOffset, // PCI Offset |
| pciReadSize, // PCI Read Size |
| data.data(), // PCI Read Data |
| &cc); // PECI Completion Code |
| #else |
| ret = peci_RdPCIConfig(clientAddr, // CPU Address |
| bus, // PCI Bus |
| dev, // PCI Device |
| func, // PCI Function |
| pciOffset, // PCI Offset |
| data.data(), // PCI Read Data |
| &cc); // PECI Completion Code |
| #endif |
| } |
| if (ret != PECI_CC_SUCCESS) |
| { |
| return resCode::resErr; |
| } |
| else if (cc != PECI_DEV_CC_SUCCESS) |
| { |
| return resCode::resSkip; |
| } |
| |
| // Now build the requested data into a single number |
| pciData = 0; |
| for (int i = mod; i < mod + size; i++) |
| { |
| pciData |= static_cast<uint32_t>(data[i]) << 8 * (i - mod); |
| } |
| |
| return resCode::resOk; |
| } |
| |
| static resCode getStringFromData(const int& size, const uint32_t& data, |
| std::string& res) |
| { |
| // And convert it to a string |
| std::stringstream dataStream; |
| dataStream << "0x" << std::hex << std::setfill('0') << std::setw(size * 2) |
| << data; |
| res = dataStream.str(); |
| return resCode::resOk; |
| } |
| |
| static resCode getVendorName(const int& clientAddr, const int& bus, |
| const int& dev, std::string& res) |
| { |
| static constexpr const int vendorIDOffset = 0x00; |
| static constexpr const int vendorIDSize = 2; |
| |
| // Get the header type register from function 0 |
| uint32_t vendorID = 0; |
| if (getDataFromPCIeConfig(clientAddr, bus, dev, 0, vendorIDOffset, |
| vendorIDSize, vendorID) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| // Get the vendor name or use Other if it doesn't exist |
| res = pciVendors.try_emplace(vendorID, otherVendor).first->second; |
| return resCode::resOk; |
| } |
| |
| static resCode getDeviceClass(const int& clientAddr, const int& bus, |
| const int& dev, const int& func, std::string& res) |
| { |
| static constexpr const int baseClassOffset = 0x0b; |
| static constexpr const int baseClassSize = 1; |
| |
| // Get the Device Base Class |
| uint32_t baseClass = 0; |
| if (getDataFromPCIeConfig(clientAddr, bus, dev, func, baseClassOffset, |
| baseClassSize, baseClass) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| // Get the base class name or use Other if it doesn't exist |
| res = pciDeviceClasses.try_emplace(baseClass, otherClass).first->second; |
| return resCode::resOk; |
| } |
| |
| static resCode getCapReading(const int& clientAddr, const int& bus, |
| const int& dev, uint32_t& capReading, |
| const int compareCapID, const int offsetAddress, |
| const int offsetLength) |
| { |
| resCode error; |
| uint32_t capAddress = 0; |
| uint32_t capabilityID; |
| uint32_t nextCapPointer = peci_pcie::pointToCapStruct; |
| |
| do |
| { |
| // Get capability address |
| error = getDataFromPCIeConfig(clientAddr, bus, dev, 0, nextCapPointer, |
| 1, capAddress); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| // Capability struct address is a pointer which point to next capability |
| // struct, so if capability struct address is 0 means it doesn't have |
| // next capability struct. |
| if (capAddress == 0) |
| { |
| return resCode::resSkip; |
| } |
| // Get capability ID |
| error = getDataFromPCIeConfig(clientAddr, bus, dev, 0, capAddress, 1, |
| capabilityID); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| nextCapPointer = capAddress + peci_pcie::capPointerOffset; |
| |
| } while (capabilityID != compareCapID); |
| // Get capability reading. |
| error = getDataFromPCIeConfig(clientAddr, bus, dev, 0, |
| capAddress + offsetAddress, offsetLength, |
| capReading); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| return resCode::resOk; |
| } |
| |
| static resCode getGenerationInUse(const int& clientAddr, const int& bus, |
| const int& dev, std::string& generationInUse) |
| { |
| static std::unordered_set<uint32_t> linkSpeedSkipMap; |
| resCode error; |
| std::string res; |
| uint32_t capReading = 0; |
| |
| // Capability ID 0x10(16) is PCI Express |
| constexpr int pcieCapID = 16; |
| constexpr int capLength = 2; |
| uint32_t linkStatus; |
| |
| error = getCapReading(clientAddr, bus, dev, linkStatus, pcieCapID, |
| peci_pcie::linkStatusOffset, capLength); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| |
| uint32_t linkSpeed = linkStatus & peci_pcie::maskOfCLS; |
| |
| switch (linkSpeed) |
| { |
| case peci_pcie::pcieGen1: |
| generationInUse = "xyz.openbmc_project.Inventory.Item." |
| "PCIeSlot.Generations.Gen1"; |
| error = resCode::resOk; |
| break; |
| case peci_pcie::pcieGen2: |
| generationInUse = "xyz.openbmc_project.Inventory.Item." |
| "PCIeSlot.Generations.Gen2"; |
| error = resCode::resOk; |
| break; |
| case peci_pcie::pcieGen3: |
| generationInUse = "xyz.openbmc_project.Inventory.Item." |
| "PCIeSlot.Generations.Gen3"; |
| error = resCode::resOk; |
| break; |
| case peci_pcie::pcieGen4: |
| generationInUse = "xyz.openbmc_project.Inventory.Item." |
| "PCIeSlot.Generations.Gen4"; |
| error = resCode::resOk; |
| break; |
| case peci_pcie::pcieGen5: |
| generationInUse = "xyz.openbmc_project.Inventory.Item." |
| "PCIeSlot.Generations.Gen5"; |
| error = resCode::resOk; |
| break; |
| default: |
| if (!linkSpeedSkipMap.contains(linkSpeed)) |
| { |
| std::cerr << "Link speed : " << linkSpeed |
| << " can not mapping to PCIe type list.\n"; |
| linkSpeedSkipMap.emplace(linkSpeed); |
| } |
| error = resCode::resSkip; |
| } |
| return error; |
| } |
| |
| static resCode isMultiFunction(const int& clientAddr, const int& bus, |
| const int& dev, bool& res) |
| { |
| static constexpr const int headerTypeOffset = 0x0e; |
| static constexpr const int headerTypeSize = 1; |
| static constexpr const int multiFuncBit = 1 << 7; |
| |
| res = false; |
| // Get the header type register from function 0 |
| uint32_t headerType = 0; |
| if (getDataFromPCIeConfig(clientAddr, bus, dev, 0, headerTypeOffset, |
| headerTypeSize, headerType) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| // Check if it's a multifunction device |
| if (headerType & multiFuncBit) |
| { |
| res = true; |
| } |
| return resCode::resOk; |
| } |
| |
| static resCode pcieFunctionExists(const int& clientAddr, const int& bus, |
| const int& dev, const int& func, bool& res) |
| { |
| constexpr const int pciIDOffset = 0; |
| constexpr const int pciIDSize = 4; |
| uint32_t pciID = 0; |
| res = false; |
| |
| resCode error = getDataFromPCIeConfig(clientAddr, bus, dev, func, |
| pciIDOffset, pciIDSize, pciID); |
| if (error == resCode::resSkip) |
| { |
| return resCode::resOk; |
| } |
| else if (error == resCode::resErr) |
| { |
| return resCode::resErr; |
| } |
| |
| // if VID and DID are all 0s or 1s, then the device doesn't exist |
| if (pciID != 0x00000000 && pciID != 0xFFFFFFFF) |
| { |
| res = true; |
| } |
| return resCode::resOk; |
| } |
| |
| static resCode pcieDeviceExists(const int& clientAddr, const int& bus, |
| const int& dev, bool& res) |
| { |
| // Check if this device exists by checking function 0 |
| return pcieFunctionExists(clientAddr, bus, dev, 0, res); |
| } |
| |
| static resCode setPCIeProperty(const int& clientAddr, const int& bus, |
| const int& dev, const std::string& propertyName, |
| const std::string& propertyValue) |
| { |
| std::shared_ptr<sdbusplus::asio::dbus_interface> iface = |
| peci_pcie::pcieDeviceDBusMap[clientAddr][bus][dev]; |
| |
| if (iface->is_initialized()) |
| { |
| if (!iface->set_property(propertyName, propertyValue)) |
| return resCode::resErr; |
| } |
| else |
| { |
| if (!iface->register_property(propertyName, propertyValue)) |
| return resCode::resErr; |
| } |
| return resCode::resOk; |
| } |
| |
| static void setDefaultPCIeFunctionProperties(const int& clientAddr, |
| const int& bus, const int& dev, |
| const int& func) |
| { |
| // Set the function-specific properties |
| for (const auto& [name, offset, size] : peci_pcie::pciConfigInfo) |
| { |
| setPCIeProperty(clientAddr, bus, dev, |
| "Function" + std::to_string(func) + std::string(name), |
| std::string()); |
| } |
| } |
| |
| static resCode setPCIeFunctionProperties(const int& clientAddr, const int& bus, |
| const int& dev, const int& func) |
| { |
| uint32_t data = 0; |
| std::string res; |
| resCode error; |
| |
| for (const auto& [name, offset, size] : peci_pcie::pciConfigInfo) |
| { |
| if (offset < 0) |
| { |
| continue; |
| } |
| |
| error = getDataFromPCIeConfig(clientAddr, bus, dev, func, offset, size, |
| data); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| getStringFromData(size, data, res); |
| setPCIeProperty(clientAddr, bus, dev, |
| "Function" + std::to_string(func) + std::string(name), |
| res); |
| } |
| |
| // Set the function type always to physical for now |
| setPCIeProperty(clientAddr, bus, dev, |
| "Function" + std::to_string(func) + |
| std::string(peci_pcie::function::functionTypeName), |
| "Physical"); |
| |
| // Set the function Device Class |
| error = getDeviceClass(clientAddr, bus, dev, func, res); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| setPCIeProperty(clientAddr, bus, dev, |
| "Function" + std::to_string(func) + |
| std::string(peci_pcie::function::deviceClassName), |
| res); |
| return resCode::resOk; |
| } |
| |
| static resCode setPCIeDeviceProperties(const int& clientAddr, const int& bus, |
| const int& dev) |
| { |
| // Set the device manufacturer |
| std::string manuf; |
| resCode error = getVendorName(clientAddr, bus, dev, manuf); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| setPCIeProperty(clientAddr, bus, dev, "Manufacturer", manuf); |
| |
| // Set the device type |
| constexpr char const* deviceTypeName = "DeviceType"; |
| bool multiFunc; |
| error = isMultiFunction(clientAddr, bus, dev, multiFunc); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| if (multiFunc) |
| { |
| setPCIeProperty(clientAddr, bus, dev, deviceTypeName, "MultiFunction"); |
| } |
| else |
| { |
| setPCIeProperty(clientAddr, bus, dev, deviceTypeName, "SingleFunction"); |
| } |
| |
| // Set PCIe Generation |
| constexpr char const* generationInUseName = "GenerationInUse"; |
| std::string generationInUse; |
| error = getGenerationInUse(clientAddr, bus, dev, generationInUse); |
| if (error == resCode::resErr) |
| { |
| return error; |
| } |
| // "resSkip" status means it can't get the capability reading, such like |
| // this device is not PCI Express. |
| if (error == resCode::resSkip) |
| { |
| setPCIeProperty(clientAddr, bus, dev, generationInUseName, ""); |
| return resCode::resOk; |
| } |
| setPCIeProperty(clientAddr, bus, dev, generationInUseName, generationInUse); |
| |
| return resCode::resOk; |
| } |
| |
| static resCode updatePCIeDevice(const int& clientAddr, const int& bus, |
| const int& dev) |
| { |
| if (setPCIeDeviceProperties(clientAddr, bus, dev) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| |
| // Walk through and populate the functions for this device |
| for (int func = 0; func < peci_pcie::maxPCIFunctions; func++) |
| { |
| bool res; |
| resCode error = pcieFunctionExists(clientAddr, bus, dev, func, res); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| if (res) |
| { |
| // Set the properties for this function |
| if (setPCIeFunctionProperties(clientAddr, bus, dev, func) != |
| resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| } |
| else |
| { |
| // Set default properties for unused functions |
| setDefaultPCIeFunctionProperties(clientAddr, bus, dev, func); |
| } |
| } |
| return resCode::resOk; |
| } |
| |
| static void removePCIeDevice(sdbusplus::asio::object_server& objServer, |
| const int& clientAddr, const int& bus, |
| const int& dev) |
| { |
| std::shared_ptr<sdbusplus::asio::dbus_interface> iface = |
| peci_pcie::pcieDeviceDBusMap[clientAddr][bus][dev]; |
| |
| objServer.remove_interface(iface); |
| |
| peci_pcie::pcieDeviceDBusMap[clientAddr][bus].erase(dev); |
| if (peci_pcie::pcieDeviceDBusMap[clientAddr][bus].empty()) |
| { |
| peci_pcie::pcieDeviceDBusMap[clientAddr].erase(bus); |
| } |
| if (peci_pcie::pcieDeviceDBusMap[clientAddr].empty()) |
| { |
| peci_pcie::pcieDeviceDBusMap.erase(clientAddr); |
| } |
| } |
| |
| static resCode addPCIeDevice(sdbusplus::asio::object_server& objServer, |
| const int& clientAddr, const int& cpu, |
| const int& bus, const int& dev) |
| { |
| std::string pathName = std::string(peci_pcie::peciPCIePath) + "/S" + |
| std::to_string(cpu) + "B" + std::to_string(bus) + |
| "D" + std::to_string(dev); |
| std::shared_ptr<sdbusplus::asio::dbus_interface> iface = |
| objServer.add_interface(pathName, peci_pcie::peciPCIeDeviceInterface); |
| peci_pcie::pcieDeviceDBusMap[clientAddr][bus][dev] = iface; |
| |
| // Update the properties for the new device |
| if (updatePCIeDevice(clientAddr, bus, dev) != resCode::resOk) |
| { |
| removePCIeDevice(objServer, clientAddr, bus, dev); |
| return resCode::resErr; |
| } |
| |
| iface->initialize(); |
| return resCode::resOk; |
| } |
| |
| static bool pcieDeviceInDBusMap(const int& clientAddr, const int& bus, |
| const int& dev) |
| { |
| if (auto clientAddrIt = peci_pcie::pcieDeviceDBusMap.find(clientAddr); |
| clientAddrIt != peci_pcie::pcieDeviceDBusMap.end()) |
| { |
| if (auto busIt = clientAddrIt->second.find(bus); |
| busIt != clientAddrIt->second.end()) |
| { |
| if (auto devIt = busIt->second.find(dev); |
| devIt != busIt->second.end()) |
| { |
| if (devIt->second) |
| { |
| return true; |
| } |
| } |
| } |
| } |
| return false; |
| } |
| |
| static resCode probePCIeDevice(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| size_t addr, int cpu, int bus, int dev) |
| { |
| bool res; |
| resCode error = pcieDeviceExists(addr, bus, dev, res); |
| if (error != resCode::resOk) |
| { |
| return error; |
| } |
| if (res) |
| { |
| if (pcieDeviceInDBusMap(addr, bus, dev)) |
| { |
| // This device is already in D-Bus, so update it |
| if (updatePCIeDevice(addr, bus, dev) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| } |
| else |
| { |
| // This device is not in D-Bus, so add it |
| if (addPCIeDevice(objServer, addr, cpu, bus, dev) != resCode::resOk) |
| { |
| return resCode::resErr; |
| } |
| } |
| } |
| else |
| { |
| // If PECI is not available, then stop scanning |
| if (!isPECIAvailable()) |
| { |
| return resCode::resErr; |
| } |
| |
| if (pcieDeviceInDBusMap(addr, bus, dev)) |
| { |
| // This device is in D-Bus, so remove it |
| removePCIeDevice(objServer, addr, bus, dev); |
| } |
| } |
| return resCode::resOk; |
| } |
| |
| static void scanNextPCIeDevice(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| std::vector<CPUInfo>& cpuInfo, int cpu, int bus, |
| int dev); |
| static void scanPCIeDevice(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| std::vector<CPUInfo>& cpuInfo, int cpu, int bus, |
| int dev) |
| { |
| if (cpu >= cpuInfo.size()) |
| { |
| std::cerr << "Request to scan CPU" << cpu |
| << " while CPU array has size " << cpuInfo.size() << "\n"; |
| return; |
| } |
| auto& info = cpuInfo[cpu]; |
| // Check if this is a CPU bus that we should skip |
| if (info.skipCpuBuses && info.cpuBusNums.count(bus)) |
| { |
| std::cout << "Skipping CPU " << cpu << " Bus Number " << bus << "\n"; |
| // Skip all the devices on this bus |
| dev = peci_pcie::maxPCIDevices; |
| } |
| else |
| { |
| if (probePCIeDevice(io, objServer, info.addr, cpu, bus, dev) != |
| resCode::resOk) |
| { |
| std::cerr << "Failed to probe CPU " << cpu << " Bus " << bus |
| << " Device " << dev << "\n"; |
| peci_pcie::abortScan = true; |
| } |
| } |
| |
| scanNextPCIeDevice(io, objServer, cpuInfo, cpu, bus, dev); |
| return; |
| } |
| |
| static void scanNextPCIeDevice(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| std::vector<CPUInfo>& cpuInfo, int cpu, int bus, |
| int dev) |
| { |
| if (peci_pcie::abortScan) |
| { |
| peci_pcie::scanInProgress = false; |
| std::cerr << "PCIe scan aborted\n"; |
| return; |
| } |
| |
| // PCIe Device scan completed, so move to the next device |
| if (++dev >= peci_pcie::maxPCIDevices) |
| { |
| // All devices scanned, so move to the next bus |
| dev = 0; |
| if (++bus >= peci_pcie::maxPCIBuses) |
| { |
| // All buses scanned, so move to the next CPU |
| bus = 0; |
| if (++cpu >= cpuInfo.size()) |
| { |
| // All CPUs scanned, so we're done |
| peci_pcie::scanInProgress = false; |
| std::cerr << "PCIe scan completed\n"; |
| return; |
| } |
| } |
| } |
| boost::asio::post(io, [&io, &objServer, &cpuInfo, cpu, bus, dev]() mutable { |
| scanPCIeDevice(io, objServer, cpuInfo, cpu, bus, dev); |
| }); |
| } |
| |
| static void startPCIeScan(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| std::vector<CPUInfo>& cpuInfo) |
| { |
| if (!peci_pcie::scanInProgress) |
| { |
| // get the PECI client address list |
| if (getCPUBusMap(cpuInfo) != resCode::resOk) |
| { |
| peci_pcie::abortScan = true; |
| return; |
| } |
| std::cerr << "PCIe scan started\n"; |
| // scan PCIe starting from CPU 0, Bus 0, Device 0 |
| peci_pcie::scanInProgress = true; |
| peci_pcie::abortScan = false; |
| scanPCIeDevice(io, objServer, cpuInfo, 0, 0, 0); |
| } |
| } |
| |
| static void peciAvailableCheck(boost::asio::steady_timer& peciWaitTimer, |
| boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| std::vector<CPUInfo>& cpuInfo) |
| { |
| static bool lastPECIState = false; |
| bool peciAvailable = isPECIAvailable(); |
| if (peciAvailable && (!lastPECIState || peci_pcie::abortScan)) |
| { |
| lastPECIState = true; |
| auto pcieTimeout = std::make_shared<boost::asio::steady_timer>(io); |
| constexpr const int pcieWaitTime = 60; |
| pcieTimeout->expires_after(std::chrono::seconds(pcieWaitTime)); |
| pcieTimeout->async_wait([&io, &objServer, &cpuInfo, pcieTimeout]( |
| const boost::system::error_code& ec) { |
| if (ec) |
| { |
| // operation_aborted is expected if timer is canceled |
| // before completion. |
| if (ec != boost::asio::error::operation_aborted) |
| { |
| std::cerr << "PECI PCIe async_wait failed " << ec; |
| } |
| lastPECIState = false; |
| return; |
| } |
| startPCIeScan(io, objServer, cpuInfo); |
| }); |
| } |
| else if (!peciAvailable && lastPECIState) |
| { |
| lastPECIState = false; |
| } |
| |
| peciWaitTimer.expires_after( |
| std::chrono::seconds(peci_pcie::peciCheckInterval)); |
| peciWaitTimer.async_wait([&peciWaitTimer, &io, &objServer, |
| &cpuInfo](const boost::system::error_code& ec) { |
| if (ec) |
| { |
| // operation_aborted is expected if timer is canceled |
| // before completion. |
| if (ec != boost::asio::error::operation_aborted) |
| { |
| std::cerr << "PECI Available Check async_wait failed " << ec; |
| } |
| return; |
| } |
| peciAvailableCheck(peciWaitTimer, io, objServer, cpuInfo); |
| }); |
| } |
| |
| static void waitForOSStandbyDelay(boost::asio::io_service& io, |
| sdbusplus::asio::object_server& objServer, |
| boost::asio::steady_timer& osStandbyTimer, |
| std::vector<CPUInfo>& cpuInfo) |
| { |
| osStandbyTimer.expires_after( |
| std::chrono::seconds(peci_pcie::osStandbyDelaySeconds)); |
| |
| osStandbyTimer.async_wait( |
| [&io, &objServer, &cpuInfo](const boost::system::error_code& ec) { |
| if (ec == boost::asio::error::operation_aborted) |
| { |
| return; // we're being canceled |
| } |
| else if (ec) |
| { |
| std::cerr << "OS Standby async_wait failed: " << ec.value() |
| << ": " << ec.message() << "\n"; |
| return; |
| } |
| startPCIeScan(io, objServer, cpuInfo); |
| }); |
| } |
| |
| static void monitorOSStandby(boost::asio::io_service& io, |
| std::shared_ptr<sdbusplus::asio::connection> conn, |
| sdbusplus::asio::object_server& objServer, |
| boost::asio::steady_timer& osStandbyTimer, |
| std::vector<CPUInfo>& cpuInfo) |
| { |
| std::cerr << "Start OperatingSystemState Monitor\n"; |
| |
| static sdbusplus::bus::match_t osStateMatch( |
| *conn, |
| "type='signal',interface='org.freedesktop.DBus.Properties',member='" |
| "PropertiesChanged',arg0='xyz.openbmc_project.State.OperatingSystem." |
| "Status'", |
| [&io, &objServer, &osStandbyTimer, |
| &cpuInfo](sdbusplus::message_t& msg) { |
| // Get the OS State from the message |
| std::string osStateInterface; |
| boost::container::flat_map<std::string, std::variant<std::string>> |
| propertiesChanged; |
| msg.read(osStateInterface, propertiesChanged); |
| |
| for (const auto& [name, value] : propertiesChanged) |
| { |
| if (name == "OperatingSystemState") |
| { |
| const std::string* state = std::get_if<std::string>(&value); |
| if (state == nullptr) |
| { |
| std::cerr << "Unable to read OS state value\n"; |
| return; |
| } |
| // Note: Short version of OperatingSystemState value is |
| // deprecated and would be removed in the future |
| if ((*state == "Standby") || |
| (*state == "xyz.openbmc_project.State.OperatingSystem." |
| "Status.OSStatus.Standby")) |
| { |
| peci_pcie::abortScan = false; |
| waitForOSStandbyDelay(io, objServer, osStandbyTimer, |
| cpuInfo); |
| } |
| else if ((*state == "Inactive") || |
| (*state == |
| "xyz.openbmc_project.State.OperatingSystem." |
| "Status.OSStatus.Inactive")) |
| { |
| peci_pcie::abortScan = true; |
| osStandbyTimer.cancel(); |
| } |
| } |
| } |
| }); |
| |
| // Check if the OS state is already available |
| conn->async_method_call( |
| [&io, &objServer, &osStandbyTimer, |
| &cpuInfo](boost::system::error_code ec, |
| const std::variant<std::string>& property) { |
| if (ec) |
| { |
| std::cerr << "error with OS state async_method_call\n"; |
| return; |
| } |
| |
| const std::string* state = std::get_if<std::string>(&property); |
| if (state == nullptr) |
| { |
| std::cerr << "Unable to read OS state value\n"; |
| return; |
| } |
| |
| // If the OS state is in Standby, then BIOS is done and we can |
| // continue. Otherwise, we just wait for the match |
| // Note: Short version of OperatingSystemState value is deprecated |
| // and would be removed in the future |
| |
| if ((*state == "Standby") || |
| (*state == "xyz.openbmc_project.State.OperatingSystem.Status." |
| "OSStatus.Standby")) |
| { |
| waitForOSStandbyDelay(io, objServer, osStandbyTimer, cpuInfo); |
| } |
| }, |
| "xyz.openbmc_project.State.OperatingSystem", |
| "/xyz/openbmc_project/state/os", "org.freedesktop.DBus.Properties", |
| "Get", "xyz.openbmc_project.State.OperatingSystem.Status", |
| "OperatingSystemState"); |
| } |
| |
| int main(int argc, char* argv[]) |
| { |
| // setup connection to dbus |
| boost::asio::io_service io; |
| std::shared_ptr<sdbusplus::asio::connection> conn = |
| std::make_shared<sdbusplus::asio::connection>(io); |
| |
| // PECI PCIe Object |
| conn->request_name(peci_pcie::peciPCIeObject); |
| sdbusplus::asio::object_server server = |
| sdbusplus::asio::object_server(conn); |
| |
| // CPU map |
| std::vector<CPUInfo> cpuInfo; |
| |
| #ifdef WAIT_FOR_OS_STANDBY |
| boost::asio::steady_timer osStandbyTimer(io); |
| monitorOSStandby(io, conn, server, osStandbyTimer, cpuInfo); |
| #else |
| // Start the PECI check loop |
| boost::asio::steady_timer peciWaitTimer( |
| io, std::chrono::seconds(peci_pcie::peciCheckInterval)); |
| peciWaitTimer.async_wait([&peciWaitTimer, &io, &server, |
| &cpuInfo](const boost::system::error_code& ec) { |
| if (ec) |
| { |
| // operation_aborted is expected if timer is canceled |
| // before completion. |
| if (ec != boost::asio::error::operation_aborted) |
| { |
| std::cerr << "PECI Available Check async_wait failed " << ec; |
| } |
| return; |
| } |
| peciAvailableCheck(peciWaitTimer, io, server, cpuInfo); |
| }); |
| #endif |
| |
| io.run(); |
| |
| return 0; |
| } |