SPI device code updater
This code updater is for updating spi flash devices.
It can for example update the host firmware on different server boards
and has following features:
- power down the host before update
- set mux gpios to access spi flash
- (very limited) communication with ME (Management Engine)
- use flashrom to utilize fw with IFD (Intel Flash Descriptor)
- otherwise directly write to the flash chip.
The behavior of this code updater can be configured via EM.
Tested: on Tyan S8030 and Tyan S5549 Board. Steps below.
1. Display the fw inventory
```
curl --silent $creds https://$bmc/redfish/v1/UpdateService/FirmwareInventory
```
```
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory",
"@odata.type": "#SoftwareInventoryCollection.SoftwareInventoryCollection",
"Members": [
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/717f6f4d"
},
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_4950"
},
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/bios_active"
}
],
"Members@odata.count": 3,
"Name": "Software Inventory Collection"
}
```
2. Query BIOS version.
The version is "unknown" here since currently there is no interface
enabled via which to query it.
```
curl $creds https://$bmc/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_4950
```
```
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_4950",
"@odata.type": "#SoftwareInventory.v1_1_0.SoftwareInventory",
"Description": "Unknown image",
"Id": "HostSPIFlash_4950",
"Name": "Software Inventory",
"Status": {
"Health": "Warning",
"HealthRollup": "OK",
"State": "Disabled"
},
"Updateable": true,
"Version": "unknown"
}
```
3. Trigger the fw update via redfish.
```
curl -k ${creds} \
-H "Content-Type:multipart/form-data" \
-X POST \
-F UpdateParameters="{\"Targets\":[\"/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_6041\"],\"@Redfish.OperationApplyTime\":\"Immediate\"};type=application/json" \
-F "UpdateFile=@${fwpath};type=application/octet-stream" \
https://${bmc}/redfish/v1/UpdateService/update
```
4. Task is returned
```
{
"@odata.id": "/redfish/v1/TaskService/Tasks/0",
"@odata.type": "#Task.v1_4_3.Task",
"Id": "0",
"TaskState": "Running",
"TaskStatus": "OK"
}
```
5. Query Task status
```
curl --silent $creds https://$bmc/redfish/v1/TaskService/Tasks/0
```
```
{
"@odata.id": "/redfish/v1/TaskService/Tasks/0",
"@odata.type": "#Task.v1_4_3.Task",
"EndTime": "2025-02-18T14:05:46+00:00",
"HidePayload": false,
"Id": "0",
"Messages": [
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has started.",
"MessageArgs": [
"0"
],
"MessageId": "TaskEvent.1.0.TaskStarted",
"MessageSeverity": "OK",
"Resolution": "None."
},
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has changed to progress 10 percent complete.",
"MessageArgs": [
"0",
"10"
],
"MessageId": "TaskEvent.1.0.TaskProgressChanged",
"MessageSeverity": "OK",
"Resolution": "None."
},
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has changed to progress 20 percent complete.",
"MessageArgs": [
"0",
"20"
],
"MessageId": "TaskEvent.1.0.TaskProgressChanged",
"MessageSeverity": "OK",
"Resolution": "None."
},
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has changed to progress 70 percent complete.",
"MessageArgs": [
"0",
"70"
],
"MessageId": "TaskEvent.1.0.TaskProgressChanged",
"MessageSeverity": "OK",
"Resolution": "None."
},
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has changed to progress 100 percent complete.",
"MessageArgs": [
"0",
"100"
],
"MessageId": "TaskEvent.1.0.TaskProgressChanged",
"MessageSeverity": "OK",
"Resolution": "None."
},
{
"@odata.type": "#Message.v1_1_1.Message",
"Message": "The task with Id '0' has completed.",
"MessageArgs": [
"0"
],
"MessageId": "TaskEvent.1.0.TaskCompletedOK",
"MessageSeverity": "OK",
"Resolution": "None."
}
],
"Name": "Task 0",
"Payload": {
"HttpHeaders": [],
"HttpOperation": "POST",
"JsonBody": "null",
"TargetUri": "/redfish/v1/UpdateService/update"
},
"PercentComplete": 90,
"StartTime": "2025-02-18T14:04:47+00:00",
"TaskMonitor": "/redfish/v1/TaskService/TaskMonitors/0",
"TaskState": "Completed",
"TaskStatus": "OK"
}
```
6. Display the fw inventory with newly updated fw.
```
curl --silent $creds https://$bmc/redfish/v1/UpdateService/FirmwareInventory
```
```
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory",
"@odata.type": "#SoftwareInventoryCollection.SoftwareInventoryCollection",
"Members": [
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/717f6f4d"
},
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_8728"
},
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/bios_active"
}
],
"Members@odata.count": 3,
"Name": "Software Inventory Collection"
}
```
7. Query the new fw version.
The version is 'mycompversion' since that's what has been set in the
pldm fw update package for testing.
```
curl $creds https://$bmc/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_8728
```
```
{
"@odata.id": "/redfish/v1/UpdateService/FirmwareInventory/HostSPIFlash_8728",
"@odata.type": "#SoftwareInventory.v1_1_0.SoftwareInventory",
"Description": "Unknown image",
"Id": "HostSPIFlash_8728",
"Name": "Software Inventory",
"Status": {
"Health": "OK",
"HealthRollup": "OK",
"State": "Enabled"
},
"Updateable": false,
"Version": "mycompversion"
}
```
Change-Id: I27803b7fded71af2364c2f55fad841a410603dec
Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
diff --git a/subprojects/libgpiod.wrap b/subprojects/libgpiod.wrap
new file mode 100644
index 0000000..e85aa49
--- /dev/null
+++ b/subprojects/libgpiod.wrap
@@ -0,0 +1,12 @@
+[wrap-file]
+directory = libgpiod-1.6.3
+source_url = https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/snapshot/libgpiod-1.6.3.tar.gz
+source_filename = libgpiod-1.6.3.tar.gz
+source_hash = eb446070be1444fd7d32d32bbca53c2f3bbb0a21193db86198cf6050b7a28441
+patch_filename = libgpiod_1.6.3-1_patch.zip
+patch_url = https://wrapdb.mesonbuild.com/v2/libgpiod_1.6.3-1/get_patch
+patch_hash = 76821c637073679a88f77593c6f7ce65b4b5abf8c998f823fffa13918c8761df
+
+[provide]
+libgpiod = gpiod_dep
+libgpiodcxx = gpiodcxx_dep