| description: > |
| This defines an ethernet interface. |
| An object implementing this interface must implement |
| xyz.openbmc_project.State.OperationalStatus. |
| |
| |
| properties: |
| - name: InterfaceName |
| type: string |
| description: > |
| Name of the ethernet interface. |
| - name: Speed |
| type: uint32 |
| description: > |
| Current speed of the ethernet interface, in Mbps. |
| - name: AutoNeg |
| type: boolean |
| description: > |
| This indicates if the speed and duplex are automatically negotiated |
| and configured on this ethernet interface. |
| - name: DomainName |
| type: array[string] |
| description: > |
| Domain names of the ethernet interface. |
| - name: DHCPEnabled |
| type: enum[self.DHCPConf] |
| description: > |
| Address mode of the ethernet interface. |
| - name: Nameservers |
| type: array[string] |
| description: > |
| DNS servers that are currently in use on this interface. |
| errors: |
| - xyz::openbmc_project.Common.Error.NotAllowed |
| - name: StaticNameServers |
| type: array[string] |
| description: > |
| A statically defined set of DNS server IP addresses to be used when |
| DHCP provisioning is not enabled for name server configuration. As |
| an implementation option this may also be used in addition to DHCP |
| provided addresses, or in cases where the DHCP server provides no DNS |
| assigments. |
| errors: |
| - xyz.openbmc_project.Common.Error.InvalidArgument |
| - name: NTPServers |
| type: array[string] |
| description: > |
| This property describes the NTP Servers on the interface. |
| Implementation of this Dbus-interface is required to implement this property. |
| This property supports read/write operation. |
| Configure the NTP servers on the system during write operation. |
| - name: LinkLocalAutoConf |
| type: enum[self.LinkLocalConf] |
| description: > |
| This indicates link local auto configuration on this ethernet |
| interface and configured on this ethernet interface. |
| - name: IPv6AcceptRA |
| type: boolean |
| description: > |
| Boolean for accepting router advertisements in IPv6 |
| - name: NICEnabled |
| type: boolean |
| description: > |
| Boolean for to enabling or disabling the ethernet port |
| - name: LinkUp |
| type: boolean |
| flags: |
| - const |
| description: > |
| This property reports the link status for the NIC. The read-only |
| boolean value is TRUE when the network cable is inserted, or there |
| is a carrier signal. It is FALSE when the cable is unplugged, or the |
| carrier signal is missing. |
| |
| enumerations: |
| - name: LinkLocalConf |
| description: > |
| Possible link local auto configuration values. |
| values: |
| - name: fallback |
| - name: both |
| - name: v4 |
| - name: v6 |
| - name: none |
| |
| - name: DHCPConf |
| description: > |
| A list of the permitted DHCP settings used by systemd. |
| values: |
| - name: both |
| - name: v4 |
| - name: v6 |
| - name: none |