| description: > |
| Implement to provide host state management |
| |
| properties: |
| - name: RequestedHostTransition |
| type: enum[self.Transition] |
| default: 'Off' |
| description: > |
| The desired host transition. This will be preserved across AC |
| power cycles of the BMC. |
| |
| - name: CurrentHostState |
| type: enum[self.HostState] |
| description: > |
| A read-only property describing the current state of the host |
| firmware. A user can determine if a system is in transition by |
| comparing the CurrentHostState and the RequestedHostTransition |
| properties. |
| |
| - name: RestartCause |
| type: enum[self.RestartCause] |
| default: 'Unknown' |
| description: > |
| A property to define restart cause of a host. |
| |
| enumerations: |
| - name: Transition |
| description: > |
| The desired transition for host firmware |
| values: |
| - name: 'Off' |
| description: > |
| Host firmware should be off |
| - name: 'On' |
| description: > |
| Host firmware should be on |
| - name: 'Reboot' |
| description: > |
| Host firmware should be rebooted. Chassis power will be cycled from |
| off to on during this reboot |
| - name: 'GracefulWarmReboot' |
| description: > |
| Host firmware be will notified to shutdown and once complete, the |
| host firmware will be rebooted. Chassis power will remain on |
| throughout the reboot |
| - name: 'ForceWarmReboot' |
| description: > |
| Host firmware will be rebooted without notification and chassis |
| power will remain on throughout the reboot |
| |
| - name: HostState |
| description: > |
| The current state of the host firmware |
| values: |
| - name: 'Off' |
| description: > |
| Host firmware is not running |
| - name: 'TransitioningToOff' |
| description: > |
| Host firmware is transitioning to an Off state |
| - name: 'Running' |
| description: > |
| Host firmware is running |
| - name: 'TransitioningToRunning' |
| description: > |
| Host firmware is transitioning to a Running state |
| - name: 'Quiesced' |
| description: > |
| Host firmware is quiesced |
| - name: 'DiagnosticMode' |
| description: > |
| Host firmware is capturing debug information. Powering off your |
| system while the host is in this state will prevent the debug data |
| from being properly collected. The host will move to one of the |
| other states once complete. |
| |
| - name: RestartCause |
| description: > |
| The reason for host restart. |
| values: |
| - name: 'Unknown' |
| description: > |
| Reason Unknown |
| - name: 'RemoteCommand' |
| description: > |
| Remote command issued |
| - name: 'ResetButton' |
| description: > |
| Reset button pressed |
| - name: 'PowerButton' |
| description: > |
| Power button pressed |
| - name: 'WatchdogTimer' |
| description: > |
| Watchdog Timer expired |
| - name: 'PowerPolicyAlwaysOn' |
| description: > |
| Power Policy Host Always on |
| - name: 'PowerPolicyPreviousState' |
| description: > |
| Power Policy Previous State of Host |
| - name: 'SoftReset' |
| description: > |
| Soft reset of Host |