blob: 96c8c8760aac2767590c7596167606ccac5d5788 [file] [log] [blame]
description: >
SOL properties use for Get/Set SOL config parameter command in host-ipmid
sending config to SOL process in net-ipmid.
Since some platforms need to access Get/Set SOL config parameter command
through KCS, and current SOL manager is implemented in net-ipmid and
cannot be accessed by host-ipmid, add a D-Bus interface for host-ipmid
command to transfer properties to net-ipmid.
This interface will be implemented in phosphor-settings.
properties:
- name: Progress
type: byte
description: >
Set In Progress property, indicate when any parameters are being
updated.
- name: Enable
type: boolean
description: >
SOL Enable property, this controls whether the SOL payload type
can be activated.
- name: ForceEncryption
type: boolean
description: >
If SOL enable Force Payload Encryption.
- name: ForceAuthentication
type: boolean
description: >
If SOL enable Force Payload Authentication
- name: Privilege
type: byte
description: >
Sets the minimum operating privilege level that is required to
be able to activate SOL by Activate Payload command.
- name: AccumulateIntervalMS
type: byte
description: >
Character Accumulate Interval in 5ms increments.
BMC will wait this time before transmitting a packet.
- name: Threshold
type: byte
description: >
BMC will automatically send an SOL character data packet containing
this number of characters as soon as this number of characters
(or greater) has been accepted from the baseboard serial controller.
- name: RetryCount
type: byte
description: >
Packet will be dropped if no ACK/NACK received by time retries
expire.
- name: RetryIntervalMS
type: byte
description: >
Retry Interval in 10ms increments.