blob: ba0c57041ca19d3e43e733f376be65b724df1d42 [file] [log] [blame]
description: >
Implement to provide host state management
properties:
- name: RequestedHostTransition
type: enum[self.Transition]
default: 'Off'
description: >
The desired host transition. This will be preserved across AC
power cycles of the BMC.
- name: CurrentHostState
type: enum[self.HostState]
description: >
A read-only property describing the current state of the host
firmware. A user can determine if a system is in transition by
comparing the CurrentHostState and the RequestedHostTransition
properties.
- name: RestartCause
type: enum[self.RestartCause]
default: 'Unknown'
description: >
A property to define restart cause of a host.
enumerations:
- name: Transition
description: >
The desired transition for host firmware
values:
- name: 'Off'
description: >
Host firmware should be off
- name: 'On'
description: >
Host firmware should be on
- name: 'Reboot'
description: >
Host firmware should be rebooted. Chassis power will be cycled from
off to on during this reboot
- name: 'GracefulWarmReboot'
description: >
Host firmware be will notified to shutdown and once complete, the
host firmware will be rebooted. Chassis power will remain on
throughout the reboot
- name: 'ForceWarmReboot'
description: >
Host firmware will be rebooted without notification and chassis
power will remain on throughout the reboot
- name: HostState
description: >
The current state of the host firmware
values:
- name: 'Off'
description: >
Host firmware is not running
- name: 'TransitioningToOff'
description: >
Host firmware is transitioning to an Off state
- name: 'Standby'
description: >
Host firmware is in a standby state. It is awaiting a Transition
request to On to move to Running. This is an intermediate state
that some implementations of this object may move to between Off
and Running.
- name: 'Running'
description: >
Host firmware is running
- name: 'TransitioningToRunning'
description: >
Host firmware is transitioning to a Running state
- name: 'Quiesced'
description: >
Host firmware is quiesced. The host firmware is enabled but either
unresponsive or only processing a restricted set of commands. This
state can be a result of the host entering an error state or booting
into a BIOS setup environment. The BootProgress property will
provide details on which it is.
- name: 'DiagnosticMode'
description: >
Host firmware is capturing debug information. Powering off your
system while the host is in this state will prevent the debug data
from being properly collected. The host will move to one of the
other states once complete.
- name: RestartCause
description: >
The reason for host restart.
values:
- name: 'Unknown'
description: >
Reason Unknown
- name: 'RemoteCommand'
description: >
Remote command issued
- name: 'ResetButton'
description: >
Reset button pressed
- name: 'PowerButton'
description: >
Power button pressed
- name: 'WatchdogTimer'
description: >
Watchdog Timer expired
- name: 'PowerPolicyAlwaysOn'
description: >
Power Policy Host Always on
- name: 'PowerPolicyPreviousState'
description: >
Power Policy Previous State of Host
- name: 'SoftReset'
description: >
Soft reset of Host