| description: > |
| "org.freedesktop.UPower.Device -- Device interface |
| Defined at https://upower.freedesktop.org/docs/Device.html |
| Objects implementing org.freedesktop.UPower.Device also implement the |
| org.freedesktop.DBus.Introspectable and org.freedesktop.DBus.Properties |
| interfaces. Unless otherwise noted, an empty string or the value 0 in a |
| property on this interface means not set." |
| |
| methods: |
| - name: Refresh |
| description: > |
| "Refreshes the data collected from the power source. Callers need the |
| org.freedesktop.upower.refresh-power-source authorization" |
| |
| - name: GetHistory |
| description: > |
| "Gets history for the power device that is persistent across |
| reboots." |
| parameters: |
| - name: type |
| type: string |
| description: > |
| "The type of history. Valid types are rate or charge." |
| - name: timespan |
| type: uint32 |
| description: > |
| "The amount of data to return in seconds, or 0 for all." |
| - name: resolution |
| type: uint32 |
| description: > |
| "The approximate number of points to return. A higher resolution |
| is |
| more accurate, at the expense of plotting speed." |
| returns: |
| - name: data |
| type: array[struct[uint32, double, uint32]] |
| description: > |
| "The history data for the power device, if the device supports |
| history. Data is ordered from the earliest in time, to the |
| newest |
| data point. Each element contains the following members: |
| time: The time value in seconds from the gettimeofday() |
| method. |
| value: The data value, for instance the rate in W or the |
| charge |
| in %. |
| state: The state of the device, for instance charging or |
| discharging." |
| |
| - name: GetStatistics |
| description: > |
| "Gets statistics for the power device that may be interesting to show |
| on a graph in the session." |
| parameters: |
| - name: type |
| type: string |
| description: > |
| "The mode for the statistics. Valid types are charging or |
| discharging." |
| returns: |
| - name: data |
| type: array[struct[double, double]] |
| description: > |
| "The statistics data for the power device. Each element contains |
| the |
| following members: |
| value: The value of the percentage point, usually in seconds. |
| accuracy: The accuracy of the prediction in percent." |
| |
| properties: |
| - name: NativePath |
| default: "" |
| type: string |
| description: > |
| "OS specific native path of the power source. On Linux this is the |
| sysfs path, for example |
| /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0. Is |
| blank if the device is being driven by a user space driver." |
| - name: Vendor |
| default: "" |
| type: string |
| description: > |
| "Name of the vendor of the battery." |
| - name: Model |
| default: "" |
| type: string |
| description: > |
| "Name of the model of this battery." |
| - name: Serial |
| default: "" |
| type: string |
| description: > |
| "Unique serial number of the battery." |
| - name: UpdateTime |
| default: 0 |
| type: uint64 |
| description: > |
| "The point in time (seconds since the Epoch Jan 1, 1970 0:00 UTC) |
| that data was read from the power source." |
| - name: Type |
| default: 0 |
| type: uint32 |
| description: > |
| "Type of power source. |
| 0: Unknown |
| 1: Line Power |
| 2: Battery |
| 3: Ups |
| 4: Monitor |
| 5: Mouse |
| 6: Keyboard |
| 7: Pda |
| 8: Phone" |
| - name: PowerSupply |
| default: false |
| type: boolean |
| description: > |
| "If the power device is used to supply the system. This would be set |
| TRUE for laptop batteries and UPS devices, but set FALSE for wireless |
| mice or PDAs." |
| - name: HasHistory |
| default: false |
| type: boolean |
| description: > |
| "If the power device has history." |
| - name: HasStatistics |
| default: false |
| type: boolean |
| description: > |
| "If the power device has statistics." |
| - name: Online |
| default: false |
| type: boolean |
| description: > |
| "Whether power is currently being provided through line power. This |
| property is only valid if the property type has the value |
| 'line-power'." |
| - name: Energy |
| default: 0.0 |
| type: double |
| description: > |
| "Amount of energy (measured in Wh) currently available in the power |
| source. This property is only valid if the property type has the |
| value 'battery'." |
| - name: EnergyEmpty |
| default: 0.0 |
| type: double |
| description: > |
| "Amount of energy (measured in Wh) in the power source when it's |
| considered to be empty. This property is only valid if the property |
| type has the value 'battery'." |
| - name: EnergyFull |
| default: 0.0 |
| type: double |
| description: > |
| "Amount of energy (measured in Wh) in the power source when it's |
| considered full. This property is only valid if the property type |
| has the value 'battery'." |
| - name: EnergyFullDesign |
| default: 0.0 |
| type: double |
| description: > |
| "Amount of energy (measured in Wh) the power source is designed to |
| hold when it's considered full. This property is only valid if the |
| property type has the value 'battery'." |
| - name: EnergyRate |
| default: 0.0 |
| type: double |
| description: > |
| "Amount of energy being drained from the source, measured in W. If |
| positive, the source is being discharged, if negative it's being |
| charged. This property is only valid if the property type has the |
| value 'battery'." |
| - name: Voltage |
| default: 0.0 |
| type: double |
| description: > |
| "Voltage in the Cell or being recorded by the meter." |
| - name: Luminosity |
| default: 0.0 |
| type: double |
| description: > |
| "Luminosity being recorded by the meter." |
| - name: TimeToEmpty |
| default: 0 |
| type: int64 |
| description: > |
| "Number of seconds until the power source is considered empty. Is set |
| to 0 if unknown. This property is only valid if the property type |
| has the value 'battery'." |
| - name: TimeToFull |
| default: 0 |
| type: int64 |
| description: > |
| "Number of seconds until the power source is considered full. Is set |
| to 0 if unknown. This property is only valid if the property type |
| has the value 'battery'." |
| - name: Percentage |
| default: 0.0 |
| type: double |
| description: > |
| "The amount of energy left in the power source expressed as a |
| percentage between 0 and 100. Typically this is the same as (energy - |
| energy-empty) / (energy-full - energy-empty). However, some primitive |
| power sources are capable of only reporting percentages and in this |
| case the energy-* properties will be unset while this property is |
| set. This property is only valid if the property type has the value |
| 'battery'." |
| - name: Temperature |
| default: 0.0 |
| type: double |
| description: > |
| "The temperature of the device in degrees Celsius. This property is |
| only valid if the property type has the value 'battery'." |
| - name: IsPresent |
| default: false |
| type: boolean |
| description: > |
| "If the power source is present in the bay. This field is required as |
| some batteries are hot-removable, for example expensive UPS and most |
| laptop batteries. This property is only valid if the property type |
| has the value 'battery'." |
| - name: State |
| default: 0 |
| type: uint32 |
| description: > |
| "The battery power state. |
| 0: Unknown |
| 1: Charging |
| 2: Discharging |
| 3: Empty |
| 4: Fully charged |
| 5: Pending charge |
| 6: Pending discharge |
| This property is only valid if the property type has the value |
| 'battery'." |
| - name: IsRechargeable |
| default: false |
| type: boolean |
| description: > |
| "If the power source is rechargeable. This property is only valid if |
| the property type has the value 'battery'." |
| - name: Capacity |
| default: 0.0 |
| type: double |
| description: > |
| "The capacity of the power source expressed as a percentage between 0 |
| and 100. The capacity of the battery will reduce with age. A capacity |
| value less than 75% is usually a sign that you should renew your |
| battery. Typically this value is the same as (full-design / full) * |
| 100. However, some primitive power sources are not capable reporting |
| capacity and in this case the capacity property will be unset. This |
| property is only valid if the property type has the value 'battery'." |
| - name: Technology |
| default: 0 |
| type: uint32 |
| description: > |
| "Technology used in the battery: |
| 0: Unknown |
| 1: Lithium ion |
| 2: Lithium polymer |
| 3: Lithium iron phosphate |
| 4: Lead acid |
| 5: Nickel cadmium |
| 6: Nickel metal hydride |
| This property is only valid if the property type has the value |
| 'battery'." |
| - name: WarningLevel |
| default: 0 |
| type: uint32 |
| description: > |
| "Warning level of the battery: |
| 0: Unknown |
| 1: None |
| 2: Discharging (only for UPSes) |
| 3: Low |
| 4: Critical |
| 5: Action" |
| - name: BatteryLevel |
| default: 0 |
| type: uint32 |
| description: > |
| "Level of the battery: |
| 0: Unknown |
| 1: None (the battery does not use a coarse level of battery |
| reporting) |
| 3: Low |
| 4: Critical |
| 6: Normal |
| 7: High |
| 8: Full" |
| - name: IconName |
| default: "" |
| type: string |
| description: > |
| "An icon name, following the Icon Naming Specification" |