| description: > |
| Implement to specify the power consumption cap and bounds |
| |
| properties: |
| - name: PowerCap |
| type: uint32 |
| description: > |
| Power cap value. This is the user specified power cap. When enabled |
| the power usage of the system will be limited to keep the power at or |
| below this cap. This value is in Watts. |
| |
| - name: PowerCapEnable |
| type: boolean |
| description: > |
| Power cap enable. Set to true to enable the PowerCap, false to |
| disable it. |
| |
| #TODO: These following bounds are currently owned by Settings but need to be |
| # written by OCC.Control service so must be writable for now. |
| - name: MinPowerCapValue |
| type: uint32 |
| #flags: |
| # - readonly |
| default: 0 |
| description: The Minimum supported PowerCap setting. |
| |
| - name: MaxPowerCapValue |
| type: uint32 |
| #flags: |
| # - readonly |
| default: maxint |
| description: The Maximum supported PowerCap setting. |
| |
| - name: MinSoftPowerCapValue |
| type: uint32 |
| #flags: |
| # - readonly |
| default: 0 |
| description: > |
| Minimum supported soft user PowerCap setting. The min soft user |
| PowerCap value is normally less than or equal to the MinPowerCapValue. |
| When the PowerCap is set to any value between MinSoftPowerCapValue and |
| MinPowerCapValue an attempt will be made to maintain the cap but it |
| will not be guaranted. |