| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 1 | description: > |
| 2 | SOL properties use for Get/Set SOL config parameter command in host-ipmid |
| 3 | sending config to SOL process in net-ipmid. |
| 4 | Since some platforms need to access Get/Set SOL config parameter command |
| Cheng C Yang | aec8c82 | 2019-03-29 00:07:47 +0800 | [diff] [blame] | 5 | through KCS, and current SOL manager is implemented in net-ipmid and |
| 6 | cannot be accessed by host-ipmid, add a D-Bus interface for host-ipmid |
| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 7 | command to transfer properties to net-ipmid. |
| 8 | This interface will be implemented in phosphor-settings. |
| 9 | properties: |
| 10 | - name: Progress |
| 11 | type: byte |
| 12 | description: > |
| 13 | Set In Progress property, indicate when any parameters are being |
| 14 | updated. |
| 15 | - name: Enable |
| 16 | type: boolean |
| 17 | description: > |
| 18 | SOL Enable property, this controls whether the SOL payload type |
| 19 | can be activated. |
| Cheng C Yang | aec8c82 | 2019-03-29 00:07:47 +0800 | [diff] [blame] | 20 | - name: ForceEncryption |
| 21 | type: boolean |
| 22 | description: > |
| 23 | If SOL enable Force Payload Encryption. |
| 24 | - name: ForceAuthentication |
| 25 | type: boolean |
| 26 | description: > |
| 27 | If SOL enable Force Payload Authentication |
| 28 | - name: Privilege |
| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 29 | type: byte |
| 30 | description: > |
| Cheng C Yang | aec8c82 | 2019-03-29 00:07:47 +0800 | [diff] [blame] | 31 | Sets the minimum operating privilege level that is required to |
| 32 | be able to activate SOL by Activate Payload command. |
| 33 | - name: AccumulateIntervalMS |
| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 34 | type: byte |
| 35 | description: > |
| 36 | Character Accumulate Interval in 5ms increments. |
| 37 | BMC will wait this time before transmitting a packet. |
| 38 | - name: Threshold |
| 39 | type: byte |
| 40 | description: > |
| 41 | BMC will automatically send an SOL character data packet containing |
| Cheng C Yang | aec8c82 | 2019-03-29 00:07:47 +0800 | [diff] [blame] | 42 | this number of characters as soon as this number of characters |
| 43 | (or greater) has been accepted from the baseboard serial controller. |
| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 44 | - name: RetryCount |
| 45 | type: byte |
| 46 | description: > |
| 47 | Packet will be dropped if no ACK/NACK received by time retries |
| 48 | expire. |
| Cheng C Yang | aec8c82 | 2019-03-29 00:07:47 +0800 | [diff] [blame] | 49 | - name: RetryIntervalMS |
| Cheng C Yang | 7e3fe1c | 2019-03-16 02:10:37 +0800 | [diff] [blame] | 50 | type: byte |
| 51 | description: > |
| 52 | Retry Interval in 10ms increments. |