| Ratan Gupta | 564282b | 2017-04-05 18:51:18 +0530 | [diff] [blame] | 1 | description: > |
| 2 | This defines network tunneling parameters. |
| 3 | |
| 4 | # TODO Fix it through https://github.com/openbmc/openbmc/issues/1438 |
| 5 | # creatable: true |
| 6 | |
| 7 | properties: |
| 8 | - name: InterfaceName |
| 9 | type: string |
| 10 | description: > |
| 11 | Name of the interface. |
| 12 | - name: Local |
| 13 | type: string |
| 14 | description: > |
| 15 | Local endpoint of tunnel. |
| 16 | - name: Remote |
| 17 | type: string |
| 18 | description: > |
| 19 | Remote endpoint of tunnel. |
| 20 | - name: TOS |
| 21 | type: uint32 |
| 22 | description: > |
| 23 | The Type Of Service byte value for a tunnel interface. |
| 24 | - name: TTL |
| 25 | type: uint32 |
| 26 | description: > |
| 27 | Number of hops that a packet is permitted to travel. |
| 28 | - name: DiscoverPathMTU |
| 29 | type: boolean |
| 30 | description: > |
| 31 | When true, enables Path MTU Discovery on the tunnel. |
| 32 | - name: IPv6FlowLabel |
| 33 | type: uint32 |
| 34 | description: > |
| 35 | Configures the 20-bit flow label. It can be configured to a value |
| 36 | in the range 0–0xFFFFF, or be set to "inherit", in which case the |
| 37 | original flowlabel is used. |
| 38 | - name: CopyDSCP |
| 39 | type: boolean |
| 40 | description: > |
| 41 | When true, the Differentiated Service Code Point |
| 42 | (DSCP) field will be copied to the inner header from outer header |
| 43 | during the decapsulation of an IPv6 tunnel packet. |
| 44 | - name: EncapsulationLimit |
| 45 | type: uint32 |
| 46 | description: > |
| 47 | The Tunnel Encapsulation Limit option specifies how many |
| 48 | additional levels of encapsulation are permitted to be prepended |
| 49 | to the packet. |
| 50 | - name: Key |
| 51 | type: string |
| 52 | description: > |
| 53 | This parameter specifies the same key to use in both |
| 54 | directions (InputKey= and OutputKey=). |
| 55 | - name: InputKey |
| 56 | type: string |
| 57 | description: > |
| 58 | This parameter specifies the key to use for input. |
| 59 | - name: OutputKey |
| 60 | type: string |
| 61 | description: > |
| 62 | This parameter specifies the key to use for output. |
| 63 | - name: Mode |
| 64 | type: enum[self.IPv6Tunnel] |
| 65 | description: > |
| 66 | An "ip6tnl" tunnel can be in one of three modes. |
| 67 | default: any |
| 68 | |
| 69 | enumerations: |
| 70 | - name: IPv6Tunnel |
| 71 | description: > |
| 72 | Possible IPv6 tunnel types. |
| 73 | values: |
| 74 | - name: ip6ip6 |
| 75 | description: > |
| 76 | IPv6 over IPv6. |
| 77 | - name: ipip6 |
| 78 | description: > |
| 79 | IPv4 over IPv6. |
| 80 | - name: any |
| 81 | description: > |
| 82 | Either ip6ip6 or ipip6. |