tools/dreport.d/ibm.d/gendumpheader - openbmc/phosphor-debug-collector - Gitiles

 #!/bin/bash
 #
 #Header for BMC DUMP
 #This script will create header file only for IBM systems.
 #This script will generate generic IBM dump header format.
 #
 #Note: The dump header will be imposed on the dump file i.e
 #<obmdump file>.tar.xz only on IBM specific systems, user needs to
 #separate out the header before extracting the dump.
 #

 #Constants
 declare -rx INVENTORY_MANAGER='xyz.openbmc_project.Inventory.Manager'
 declare -rx INVENTORY_PATH='/xyz/openbmc_project/inventory/system'
 declare -rx INVENTORY_ASSET_INT='xyz.openbmc_project.Inventory.Decorator.Asset'
 declare -rx DUMP_HEADER_ENTRY_SIZE='516'
 declare -rx INVENTORY_BMC_BOARD='/xyz/openbmc_project/inventory/system/chassis/motherboard'
 declare -rx SIZE_4='4'
 declare -rx SIZE_8='8'
 declare -rx SIZE_12='12'
 declare -rx SIZE_32='32'

 #Variables
 declare -x FILE="/tmp/dumpheader_$EPOCHTIME"
 declare -x dumpSize=$(ls -al $name_dir.tar.xz | awk '{print $5}')
 declare -x modelNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
     $INVENTORY_ASSET_INT Model | cut -d " " -f 2 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

 declare -x serialNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
     $INVENTORY_ASSET_INT SerialNumber | cut -d " " -f 2 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

 declare -x dDay=$(date -d @$EPOCHTIME +'%Y%m%d%H%M%S')

 declare -x bmcSerialNo=$(busctl call $INVENTORY_MANAGER $INVENTORY_BMC_BOARD \
         org.freedesktop.DBus.Properties Get ss $INVENTORY_ASSET_INT \
     SerialNumber | cut -d " " -f 3 | sed "s/^\(\"\)\(.*\)\1\$/\2/g")

 #Function to add NULL
 function add_null() {
     local a=$1
     printf '%*s' $a | tr ' ' "\0" >> $FILE
 }

 #Function to is to convert the EPOCHTIME collected
 #from dreport into hex values and write the same in
 #header.
 function dump_time() {
     x=${#dDay}
     msize=`expr $x / 2`
     msize=`expr $SIZE_8 - $msize`
     for ((i=0;i<$x;i+=2));
     do
         printf \\x${dDay:$i:2} >> $FILE
     done
     add_null $msize
 }

 #Function to fetch the size of the dump
 function dump_size() {
     #Adding 516 bytes as the total dump size is dump tar size
     #plus the dump header entry in this case
     #dump_header and dump_entry
     sizeDump=`expr $dumpSize + $DUMP_HEADER_ENTRY_SIZE`
     printf -v hex "%x" $sizeDump
     x=${#hex}
     if [ $(($x % 2)) -eq 1 ]; then
         hex=0$hex
         x=${#hex}
     fi
     msize=`expr $x / 2`
     msize=`expr $SIZE_8 - $msize`
     add_null $msize
     for ((i=0;i<$x;i+=2));
     do
         printf \\x${hex:$i:2} >> $FILE
     done
 }

 #Function to set dump id to 8 bytes format
 function get_dump_id() {
     x=${#dump_id}
     nulltoadd=`expr $SIZE_8 - $x`
     printf '%*s' $nulltoadd | tr ' ' "0" >> $FILE
     printf $dump_id >> $FILE
 }

 #Function to get the bmc serial number
 function getbmc_serial() {
     x=${#bmcSerialNo}
     nulltoadd=`expr $SIZE_12 - $x`
     printf $bmcSerialNo >> $FILE
     printf '%*s' $nulltoadd | tr ' ' "0" >> $FILE
 }

 #Function to add virtual file directory entry, consists of below entries
 ####################FORMAT################
 #Name              Size(bytes)  Value
 #Entry Header      8            FILE
 #Entry Size        2            0x0040
 #Reserved          10           NULL
 #Entry Type        2            0x0001
 #File Name Prefix  2            0x000F
 #Dump File Type    7            BMCDUMP
 #Separator         1            .
 #System Serial No  7            System serial number fetched from system
 #Dump Identifier   8            Dump Identifier value fetched from dump
 #Separator         1            .
 #Time stamp        14           Form should be yyyymmddhhmmss
 #Null Terminator   1            0x00
 function dump_file_entry() {
     printf "FILE    " >> $FILE
     add_null 1
     printf '\x40' >> $FILE #Virtual file directory entry size
     add_null 11
     printf '\x01' >> $FILE
     add_null 1
     printf '\x0F' >> $FILE
     printf "BMPDUMP.%s." "$serialNo" >> $FILE
     get_dump_id
     printf "." >> $FILE
     printf $dDay >> $FILE  #UTC time stamp
     add_null 1
 }

 #Function section directory entry, consists of below entries
 ####################FORMAT################
 #Name              Size(bytes)  Value
 #Entry Header      8            SECTION
 #Entry Size        2            0x0030
 #Section Priority  2            0x0000
 #Reserved          4            NULL
 #Entry Flags       4            0x00000001
 #Entry Types       2            0x0002
 #Reserved          2            NULL
 #Dump Size         8            Dump size in hex + dump header
 #Optional Section  16           BMCDUMP
 function dump_section_entry() {
     printf "SECTION " >> $FILE
     add_null 1
     printf '\x30' >> $FILE #Section entry size
     add_null 9
     printf '\x01' >> $FILE
     add_null 1
     printf '\x02' >> $FILE
     add_null 2
     dump_size    #Dump size
     printf "BMCDUMP" >> $FILE
     add_null 9
 }

 #Function to add dump header, consists of below entries
 ####################FORMAT################
 #Name              Size(bytes)  Value
 #Dump type         8            BMC DUMP
 #Dump Request time 8            Dump request time stamp (in BCD)
 #Dump Identifier   4            Dump identifer fetched from dump
 #Dump version      2            0x0210
 #Dump header       2            0x200
 #Total dump size   8            Dump size + dump header
 #Panel function    32           System model, feature, type and IPL mode
 #System Name       32           System Name (in ASCII)
 #Serial number     7            System serial number
 #Reserved          1            NULL
 #PLID              4            Comes from errorlog
 #File Header Size  2            0x70
 #Dump SRC Size     2            Dump SRC Size. Currently NULL
 #DUMP SRC          320          DUMP SRC. Currently NULL
 #Dump Req Type     4            Dump requester user interface type.
 #Dump Req ID       32           Dump requester user interface ID
 #Dump Req user ID  32           Dump requester user ID.
 #
 #TODO: Github issue #2639, to populate the unpopulated elements.
 #Note: Unpopulated elements are listed below are set as NULL
 #PLID
 #SRC size
 #SRC dump
 #Dump requestor type
 #Dump Req ID
 #Dump Req user ID
 function dump_header() {
     printf "BMC DUMP" >> $FILE
     dump_time
     add_null 4 #Dump Identifier
     printf '\x02' >> $FILE #Dump version 0x0210
     printf '\x10' >> $FILE
     printf '\x02' >> $FILE #Dump header size 0x0200
     add_null 1
     dump_size  #dump size
     printf $modelNo >> $FILE
     add_null 24
     printf "Server-%s-SN-%s" "$modelNo" "$serialNo" >> $FILE
     add_null 7
     printf $serialNo >> $FILE
     add_null 1
     add_null 4 #PLID
     printf '\x70' >> $FILE #File header size
     add_null 2 # SRC size
     add_null 320 # SRC dump
     getbmc_serial
     add_null 68 # Dump requester details
 }

 #Function to add Dump entry, consists of below entries
 ####################FORMAT################
 #Name               Size(bytes)  Value
 #Dump Entry Version 1            0x01
 #BMC Dump Valid     1            0x01
 #No of Dump Entry   2            Number of Dump Entry
 #
 function dump_entry() {
     printf '\x01' >> $FILE #Dump entry version
     printf '\x01' >> $FILE #Dump valid
     add_null 1
     printf '\x10' >> $FILE #Dump entry
 }

 #main function
 function gen_header_package() {
     dump_file_entry
     dump_section_entry
     dump_header
     dump_entry
 }

 #Run gen_header_package
 gen_header_package
	#!/bin/bash
	#
	#Header for BMC DUMP
	#This script will create header file only for IBM systems.
	#This script will generate generic IBM dump header format.
	#
	#Note: The dump header will be imposed on the dump file i.e
	#<obmdump file>.tar.xz only on IBM specific systems, user needs to
	#separate out the header before extracting the dump.
	#

	#Constants
	declare -rx INVENTORY_MANAGER='xyz.openbmc_project.Inventory.Manager'
	declare -rx INVENTORY_PATH='/xyz/openbmc_project/inventory/system'
	declare -rx INVENTORY_ASSET_INT='xyz.openbmc_project.Inventory.Decorator.Asset'
	declare -rx DUMP_HEADER_ENTRY_SIZE='516'
	declare -rx INVENTORY_BMC_BOARD='/xyz/openbmc_project/inventory/system/chassis/motherboard'
	declare -rx SIZE_4='4'
	declare -rx SIZE_8='8'
	declare -rx SIZE_12='12'
	declare -rx SIZE_32='32'

	#Variables
	declare -x FILE="/tmp/dumpheader_$EPOCHTIME"
	declare -x dumpSize=$(ls -al $name_dir.tar.xz \| awk '{print $5}')
	declare -x modelNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
	$INVENTORY_ASSET_INT Model \| cut -d " " -f 2 \| sed "s/^\(\"\)\(.*\)\1\$/\2/g")

	declare -x serialNo=$(busctl get-property $INVENTORY_MANAGER $INVENTORY_PATH \
	$INVENTORY_ASSET_INT SerialNumber \| cut -d " " -f 2 \| sed "s/^\(\"\)\(.*\)\1\$/\2/g")

	declare -x dDay=$(date -d @$EPOCHTIME +'%Y%m%d%H%M%S')

	declare -x bmcSerialNo=$(busctl call $INVENTORY_MANAGER $INVENTORY_BMC_BOARD \
	org.freedesktop.DBus.Properties Get ss $INVENTORY_ASSET_INT \
	SerialNumber \| cut -d " " -f 3 \| sed "s/^\(\"\)\(.*\)\1\$/\2/g")

	#Function to add NULL
	function add_null() {
	local a=$1
	printf '%*s' $a \| tr ' ' "\0" >> $FILE
	}

	#Function to is to convert the EPOCHTIME collected
	#from dreport into hex values and write the same in
	#header.
	function dump_time() {
	x=${#dDay}
	msize=`expr $x / 2`
	msize=`expr $SIZE_8 - $msize`
	for ((i=0;i<$x;i+=2));
	do
	printf \\x${dDay:$i:2} >> $FILE
	done
	add_null $msize
	}

	#Function to fetch the size of the dump
	function dump_size() {
	#Adding 516 bytes as the total dump size is dump tar size
	#plus the dump header entry in this case
	#dump_header and dump_entry
	sizeDump=`expr $dumpSize + $DUMP_HEADER_ENTRY_SIZE`
	printf -v hex "%x" $sizeDump
	x=${#hex}
	if [ $(($x % 2)) -eq 1 ]; then
	hex=0$hex
	x=${#hex}
	fi
	msize=`expr $x / 2`
	msize=`expr $SIZE_8 - $msize`
	add_null $msize
	for ((i=0;i<$x;i+=2));
	do
	printf \\x${hex:$i:2} >> $FILE
	done
	}

	#Function to set dump id to 8 bytes format
	function get_dump_id() {
	x=${#dump_id}
	nulltoadd=`expr $SIZE_8 - $x`
	printf '%*s' $nulltoadd \| tr ' ' "0" >> $FILE
	printf $dump_id >> $FILE
	}

	#Function to get the bmc serial number
	function getbmc_serial() {
	x=${#bmcSerialNo}
	nulltoadd=`expr $SIZE_12 - $x`
	printf $bmcSerialNo >> $FILE
	printf '%*s' $nulltoadd \| tr ' ' "0" >> $FILE
	}

	#Function to add virtual file directory entry, consists of below entries
	####################FORMAT################
	#Name Size(bytes) Value
	#Entry Header 8 FILE
	#Entry Size 2 0x0040
	#Reserved 10 NULL
	#Entry Type 2 0x0001
	#File Name Prefix 2 0x000F
	#Dump File Type 7 BMCDUMP
	#Separator 1 .
	#System Serial No 7 System serial number fetched from system
	#Dump Identifier 8 Dump Identifier value fetched from dump
	#Separator 1 .
	#Time stamp 14 Form should be yyyymmddhhmmss
	#Null Terminator 1 0x00
	function dump_file_entry() {
	printf "FILE " >> $FILE
	add_null 1
	printf '\x40' >> $FILE #Virtual file directory entry size
	add_null 11
	printf '\x01' >> $FILE
	add_null 1
	printf '\x0F' >> $FILE
	printf "BMPDUMP.%s." "$serialNo" >> $FILE
	get_dump_id
	printf "." >> $FILE
	printf $dDay >> $FILE #UTC time stamp
	add_null 1
	}

	#Function section directory entry, consists of below entries
	####################FORMAT################
	#Name Size(bytes) Value
	#Entry Header 8 SECTION
	#Entry Size 2 0x0030
	#Section Priority 2 0x0000
	#Reserved 4 NULL
	#Entry Flags 4 0x00000001
	#Entry Types 2 0x0002
	#Reserved 2 NULL
	#Dump Size 8 Dump size in hex + dump header
	#Optional Section 16 BMCDUMP
	function dump_section_entry() {
	printf "SECTION " >> $FILE
	add_null 1
	printf '\x30' >> $FILE #Section entry size
	add_null 9
	printf '\x01' >> $FILE
	add_null 1
	printf '\x02' >> $FILE
	add_null 2
	dump_size #Dump size
	printf "BMCDUMP" >> $FILE
	add_null 9
	}

	#Function to add dump header, consists of below entries
	####################FORMAT################
	#Name Size(bytes) Value
	#Dump type 8 BMC DUMP
	#Dump Request time 8 Dump request time stamp (in BCD)
	#Dump Identifier 4 Dump identifer fetched from dump
	#Dump version 2 0x0210
	#Dump header 2 0x200
	#Total dump size 8 Dump size + dump header
	#Panel function 32 System model, feature, type and IPL mode
	#System Name 32 System Name (in ASCII)
	#Serial number 7 System serial number
	#Reserved 1 NULL
	#PLID 4 Comes from errorlog
	#File Header Size 2 0x70
	#Dump SRC Size 2 Dump SRC Size. Currently NULL
	#DUMP SRC 320 DUMP SRC. Currently NULL
	#Dump Req Type 4 Dump requester user interface type.
	#Dump Req ID 32 Dump requester user interface ID
	#Dump Req user ID 32 Dump requester user ID.
	#
	#TODO: Github issue #2639, to populate the unpopulated elements.
	#Note: Unpopulated elements are listed below are set as NULL
	#PLID
	#SRC size
	#SRC dump
	#Dump requestor type
	#Dump Req ID
	#Dump Req user ID
	function dump_header() {
	printf "BMC DUMP" >> $FILE
	dump_time
	add_null 4 #Dump Identifier
	printf '\x02' >> $FILE #Dump version 0x0210
	printf '\x10' >> $FILE
	printf '\x02' >> $FILE #Dump header size 0x0200
	add_null 1
	dump_size #dump size
	printf $modelNo >> $FILE
	add_null 24
	printf "Server-%s-SN-%s" "$modelNo" "$serialNo" >> $FILE
	add_null 7
	printf $serialNo >> $FILE
	add_null 1
	add_null 4 #PLID
	printf '\x70' >> $FILE #File header size
	add_null 2 # SRC size
	add_null 320 # SRC dump
	getbmc_serial
	add_null 68 # Dump requester details
	}

	#Function to add Dump entry, consists of below entries
	####################FORMAT################
	#Name Size(bytes) Value
	#Dump Entry Version 1 0x01
	#BMC Dump Valid 1 0x01
	#No of Dump Entry 2 Number of Dump Entry
	#
	function dump_entry() {
	printf '\x01' >> $FILE #Dump entry version
	printf '\x01' >> $FILE #Dump valid
	add_null 1
	printf '\x10' >> $FILE #Dump entry
	}

	#main function
	function gen_header_package() {
	dump_file_entry
	dump_section_entry
	dump_header
	dump_entry
	}

	#Run gen_header_package
	gen_header_package