| #include "channel.hpp" |
| #include "types.hpp" |
| #include "transporthandler.hpp" |
| #include "utils.hpp" |
| #include "net.hpp" |
| |
| #include <string> |
| #include <arpa/inet.h> |
| |
| #include <phosphor-logging/log.hpp> |
| #include <phosphor-logging/elog-errors.hpp> |
| #include "xyz/openbmc_project/Common/error.hpp" |
| |
| constexpr auto ipv4Protocol = "xyz.openbmc_project.Network.IP.Protocol.IPv4"; |
| |
| using namespace phosphor::logging; |
| using namespace sdbusplus::xyz::openbmc_project::Common::Error; |
| |
| /** @struct SetChannelAccessRequest |
| * |
| * IPMI payload for Set Channel access command request. |
| */ |
| struct SetChannelAccessRequest |
| { |
| uint8_t channelNumber; //!< Channel number. |
| uint8_t setting; //!< The setting values. |
| uint8_t privilegeLevelLimit; //!< The Privilege Level Limit |
| } __attribute__((packed)); |
| |
| /** @struct GetChannelAccessRequest |
| * |
| * IPMI payload for Get Channel access command request. |
| */ |
| struct GetChannelAccessRequest |
| { |
| uint8_t channelNumber; //!< Channel number. |
| uint8_t volatileSetting; //!< Get non-volatile or the volatile setting. |
| } __attribute__((packed)); |
| |
| /** @struct GetChannelAccessResponse |
| * |
| * IPMI payload for Get Channel access command response. |
| */ |
| struct GetChannelAccessResponse |
| { |
| uint8_t settings; //!< Channel settings. |
| uint8_t privilegeLimit; //!< Channel privilege level limit. |
| } __attribute__((packed)); |
| |
| ipmi_ret_t ipmi_set_channel_access(ipmi_netfn_t netfn, |
| ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| ipmi_ret_t rc = IPMI_CC_OK; |
| |
| std::string ipaddress; |
| std::string gateway; |
| uint8_t prefix {}; |
| uint32_t vlanID {}; |
| std::string networkInterfacePath; |
| ipmi::DbusObjectInfo ipObject; |
| ipmi::DbusObjectInfo systemObject; |
| |
| if (*data_len < sizeof(SetChannelAccessRequest)) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| auto requestData = reinterpret_cast<const SetChannelAccessRequest*> |
| (request); |
| int channel = requestData->channelNumber & CHANNEL_MASK; |
| auto ethdevice = ipmi::network::ChanneltoEthernet(channel); |
| if (ethdevice.empty()) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| auto ethIp = ethdevice + "/" + ipmi::network::IP_TYPE; |
| auto channelConf = getChannelConfig(channel); |
| |
| // Todo: parse the request data if needed. |
| // Using Set Channel cmd to apply changes of Set Lan Cmd. |
| try |
| { |
| sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection()); |
| |
| log<level::INFO>("Network data from Cache", |
| entry("PREFIX=%s", channelConf->netmask.c_str()), |
| entry("ADDRESS=%s", channelConf->ipaddr.c_str()), |
| entry("GATEWAY=%s", channelConf->gateway.c_str()), |
| entry("VLAN=%d", channelConf->vlanID), |
| entry("IPSRC=%d", channelConf->ipsrc)); |
| |
| if (channelConf->vlanID != ipmi::network::VLAN_ID_MASK) |
| { |
| //get the first twelve bits which is vlan id |
| //not interested in rest of the bits. |
| channelConf->vlanID = le32toh(channelConf->vlanID); |
| vlanID = channelConf->vlanID & ipmi::network::VLAN_ID_MASK; |
| } |
| |
| // if the asked ip src is DHCP then not interested in |
| // any given data except vlan. |
| if (channelConf->ipsrc != ipmi::network::IPOrigin::DHCP) |
| { |
| // always get the system object |
| systemObject = ipmi::getDbusObject( |
| bus, |
| ipmi::network::SYSTEMCONFIG_INTERFACE, |
| ipmi::network::ROOT); |
| |
| // the below code is to determine the mode of the interface |
| // as the handling is same, if the system is configured with |
| // DHCP or user has given all the data. |
| try |
| { |
| ipmi::ObjectTree ancestorMap; |
| |
| ipmi::InterfaceList interfaces { |
| ipmi::network::ETHERNET_INTERFACE }; |
| |
| // if the system is having ip object,then |
| // get the IP object. |
| ipObject = ipmi::getDbusObject(bus, |
| ipmi::network::IP_INTERFACE, |
| ipmi::network::ROOT, |
| ethIp); |
| |
| // Get the parent interface of the IP object. |
| try |
| { |
| ancestorMap = ipmi::getAllAncestors(bus, |
| ipObject.first, |
| std::move(interfaces)); |
| } |
| catch (InternalFailure& e) |
| { |
| // if unable to get the parent interface |
| // then commit the error and return. |
| log<level::ERR>("Unable to get the parent interface", |
| entry("PATH=%s", ipObject.first.c_str()), |
| entry("INTERFACE=%s", |
| ipmi::network::ETHERNET_INTERFACE)); |
| commit<InternalFailure>(); |
| rc = IPMI_CC_UNSPECIFIED_ERROR; |
| channelConf->clear(); |
| return rc; |
| } |
| |
| networkInterfacePath = ancestorMap.begin()->first; |
| } |
| catch (InternalFailure& e) |
| { |
| // TODO Currently IPMI supports single interface,need to handle |
| // Multiple interface through |
| // https://github.com/openbmc/openbmc/issues/2138 |
| |
| // if there is no ip configured on the system,then |
| // get the network interface object. |
| auto networkInterfaceObject = ipmi::getDbusObject( |
| bus, |
| ipmi::network::ETHERNET_INTERFACE, |
| ipmi::network::ROOT, |
| ethdevice); |
| |
| networkInterfacePath = std::move(networkInterfaceObject.first); |
| } |
| |
| // get the configured mode on the system. |
| auto enableDHCP = ipmi::getDbusProperty( |
| bus, |
| ipmi::network::SERVICE, |
| networkInterfacePath, |
| ipmi::network::ETHERNET_INTERFACE, |
| "DHCPEnabled").get<bool>(); |
| |
| // if ip address source is not given then get the ip source mode |
| // from the system so that it can be applied later. |
| if (channelConf->ipsrc == ipmi::network::IPOrigin::UNSPECIFIED) |
| { |
| channelConf->ipsrc = (enableDHCP) ? |
| ipmi::network::IPOrigin::DHCP : |
| ipmi::network::IPOrigin::STATIC; |
| } |
| |
| // check whether user has given all the data |
| // or the configured system interface is dhcp enabled, |
| // in both of the cases get the values from the cache. |
| if ((!channelConf->ipaddr.empty() && |
| !channelConf->netmask.empty() && |
| !channelConf->gateway.empty()) || |
| (enableDHCP)) // configured system interface mode = DHCP |
| { |
| //convert mask into prefix |
| ipaddress = channelConf->ipaddr; |
| prefix = ipmi::network::toPrefix(AF_INET, channelConf->netmask); |
| gateway = channelConf->gateway; |
| } |
| else // asked ip src = static and configured system src = static |
| // or partially given data. |
| { |
| // We have partial filled cache so get the remaining |
| // info from the system. |
| |
| // Get the network data from the system as user has |
| // not given all the data then use the data fetched from the |
| // system but it is implementation dependent,IPMI spec doesn't |
| // force it. |
| |
| // if system is not having any ip object don't throw error, |
| try |
| { |
| auto properties = ipmi::getAllDbusProperties( |
| bus, |
| ipObject.second, |
| ipObject.first, |
| ipmi::network::IP_INTERFACE); |
| |
| ipaddress = channelConf->ipaddr.empty() ? |
| properties["Address"].get<std::string>() : |
| channelConf->ipaddr; |
| |
| prefix = channelConf->netmask.empty() ? |
| properties["PrefixLength"].get<uint8_t>() : |
| ipmi::network::toPrefix(AF_INET, |
| channelConf->netmask); |
| } |
| catch (InternalFailure& e) |
| { |
| log<level::INFO>("Failed to get IP object which matches", |
| entry("INTERFACE=%s", ipmi::network::IP_INTERFACE), |
| entry("MATCH=%s", ethIp)); |
| } |
| |
| auto systemProperties = ipmi::getAllDbusProperties( |
| bus, |
| systemObject.second, |
| systemObject.first, |
| ipmi::network::SYSTEMCONFIG_INTERFACE); |
| |
| gateway = channelConf->gateway.empty() ? |
| systemProperties["DefaultGateway"].get<std::string>() : |
| channelConf->gateway; |
| } |
| } |
| |
| // Currently network manager doesn't support purging of all the |
| // ip addresses and the vlan interfaces from the parent interface, |
| // TODO once the support is there, will make the change here. |
| // https://github.com/openbmc/openbmc/issues/2141. |
| |
| // TODO Currently IPMI supports single interface,need to handle |
| // Multiple interface through |
| // https://github.com/openbmc/openbmc/issues/2138 |
| |
| // instead of deleting all the vlan interfaces and |
| // all the ipv4 address,we will call reset method. |
| //delete all the vlan interfaces |
| |
| ipmi::deleteAllDbusObjects(bus, |
| ipmi::network::ROOT, |
| ipmi::network::VLAN_INTERFACE); |
| |
| // set the interface mode to static |
| auto networkInterfaceObject = ipmi::getDbusObject( |
| bus, |
| ipmi::network::ETHERNET_INTERFACE, |
| ipmi::network::ROOT, |
| ethdevice); |
| |
| // setting the physical interface mode to static. |
| ipmi::setDbusProperty(bus, |
| ipmi::network::SERVICE, |
| networkInterfaceObject.first, |
| ipmi::network::ETHERNET_INTERFACE, |
| "DHCPEnabled", |
| false); |
| |
| networkInterfacePath = networkInterfaceObject.first; |
| |
| //delete all the ipv4 addresses |
| ipmi::deleteAllDbusObjects(bus, |
| ipmi::network::ROOT, |
| ipmi::network::IP_INTERFACE, |
| ethIp); |
| |
| if (vlanID) |
| { |
| ipmi::network::createVLAN(bus, |
| ipmi::network::SERVICE, |
| ipmi::network::ROOT, |
| ethdevice, |
| vlanID); |
| |
| auto networkInterfaceObject = ipmi::getDbusObject( |
| bus, |
| ipmi::network::VLAN_INTERFACE, |
| ipmi::network::ROOT); |
| |
| networkInterfacePath = networkInterfaceObject.first; |
| } |
| |
| if (channelConf->ipsrc == ipmi::network::IPOrigin::DHCP) |
| { |
| ipmi::setDbusProperty(bus, |
| ipmi::network::SERVICE, |
| networkInterfacePath, |
| ipmi::network::ETHERNET_INTERFACE, |
| "DHCPEnabled", |
| true); |
| } |
| else |
| { |
| //change the mode to static |
| ipmi::setDbusProperty(bus, |
| ipmi::network::SERVICE, |
| networkInterfacePath, |
| ipmi::network::ETHERNET_INTERFACE, |
| "DHCPEnabled", |
| false); |
| |
| if (!ipaddress.empty()) |
| { |
| ipmi::network::createIP(bus, |
| ipmi::network::SERVICE, |
| networkInterfacePath, |
| ipv4Protocol, |
| ipaddress, |
| prefix); |
| } |
| |
| if (!gateway.empty()) |
| { |
| ipmi::setDbusProperty(bus, |
| systemObject.second, |
| systemObject.first, |
| ipmi::network::SYSTEMCONFIG_INTERFACE, |
| "DefaultGateway", |
| std::string(gateway)); |
| } |
| } |
| |
| } |
| catch (InternalFailure& e) |
| { |
| log<level::ERR>("Failed to set network data", |
| entry("PREFIX=%d", prefix), |
| entry("ADDRESS=%s", ipaddress.c_str()), |
| entry("GATEWAY=%s", gateway.c_str()), |
| entry("VLANID=%d", vlanID), |
| entry("IPSRC=%d", channelConf->ipsrc)); |
| |
| commit<InternalFailure>(); |
| rc = IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| channelConf->clear(); |
| return rc; |
| } |
| |
| ipmi_ret_t ipmi_get_channel_access(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = reinterpret_cast<const GetChannelAccessRequest*> |
| (request); |
| std::vector<uint8_t> outPayload(sizeof(GetChannelAccessResponse)); |
| auto responseData = reinterpret_cast<GetChannelAccessResponse*> |
| (outPayload.data()); |
| |
| /* |
| * The value Eh is used as a way to identify the current channel that |
| * the command is being received from. |
| */ |
| constexpr auto channelE = 0x0E; |
| int channel = requestData->channelNumber; |
| auto ethdevice = ipmi::network::ChanneltoEthernet(channel); |
| |
| if (channel != channelE && ethdevice.empty()) |
| { |
| *data_len = 0; |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| /* |
| * [7:6] - reserved |
| * [5] - 1b = Alerting disabled |
| * [4] - 1b = per message authentication disabled |
| * [3] - 0b = User level authentication enabled |
| * [2:0] - 2h = always available |
| */ |
| constexpr auto channelSetting = 0x32; |
| |
| responseData->settings = channelSetting; |
| //Defaulting the channel privilege to administrator level. |
| responseData->privilegeLimit = PRIVILEGE_ADMIN; |
| |
| *data_len = outPayload.size(); |
| memcpy(response, outPayload.data(), *data_len); |
| |
| return IPMI_CC_OK; |
| } |
| |
| // ATTENTION: This ipmi function is very hardcoded on purpose |
| // OpenBMC does not fully support IPMI. This command is useful |
| // to have around because it enables testing of interfaces with |
| // the IPMI tool. |
| #define GET_CHANNEL_INFO_CHANNEL_OFFSET 0 |
| // IPMI Table 6-2 |
| #define IPMI_CHANNEL_TYPE_IPMB 1 |
| // IPMI Table 6-3 |
| #define IPMI_CHANNEL_MEDIUM_TYPE_OTHER 6 |
| |
| ipmi_ret_t ipmi_app_channel_info(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| ipmi_ret_t rc = IPMI_CC_OK; |
| uint8_t resp[] = { |
| 1, |
| IPMI_CHANNEL_MEDIUM_TYPE_OTHER, |
| IPMI_CHANNEL_TYPE_IPMB, |
| 1,0x41,0xA7,0x00,0,0}; |
| uint8_t *p = (uint8_t*) request; |
| int channel = (*p) & CHANNEL_MASK; |
| std::string ethdevice = ipmi::network::ChanneltoEthernet(channel); |
| |
| printf("IPMI APP GET CHANNEL INFO\n"); |
| |
| // The supported channels numbers are those which are configured. |
| // Channel Number E is used as way to identify the current channel |
| // that the command is being is received from. |
| if (channel != 0xe && ethdevice.empty()) { |
| rc = IPMI_CC_PARM_OUT_OF_RANGE; |
| *data_len = 0; |
| } else { |
| *data_len = sizeof(resp); |
| memcpy(response, resp, *data_len); |
| } |
| |
| return rc; |
| } |