blob: dab62c495f5e142c7f10a2c1e581e11a8b8bebdf [file] [log] [blame]
#include "config.h"
#include "chassishandler.hpp"
#include "ipmid.hpp"
#include "settings.hpp"
#include "timer.hpp"
#include "types.hpp"
#include "utils.hpp"
#include <arpa/inet.h>
#include <endian.h>
#include <host-ipmid/ipmid-api.h>
#include <limits.h>
#include <mapper.h>
#include <netinet/in.h>
#include <array>
#include <chrono>
#include <cstring>
#include <fstream>
#include <future>
#include <map>
#include <phosphor-logging/elog-errors.hpp>
#include <phosphor-logging/log.hpp>
#include <sdbusplus/bus.hpp>
#include <sdbusplus/server/object.hpp>
#include <sstream>
#include <string>
#include <xyz/openbmc_project/Common/error.hpp>
#include <xyz/openbmc_project/Control/Boot/Mode/server.hpp>
#include <xyz/openbmc_project/Control/Boot/Source/server.hpp>
#include <xyz/openbmc_project/Control/Power/RestorePolicy/server.hpp>
#include <xyz/openbmc_project/State/Host/server.hpp>
#include <xyz/openbmc_project/State/PowerOnHours/server.hpp>
#if __has_include(<filesystem>)
#include <filesystem>
#elif __has_include(<experimental/filesystem>)
#include <experimental/filesystem>
namespace std
{
// splice experimental::filesystem into std
namespace filesystem = std::experimental::filesystem;
} // namespace std
#else
#error filesystem not available
#endif
// Defines
#define SET_PARM_VERSION 0x01
#define SET_PARM_BOOT_FLAGS_PERMANENT 0x40 // boot flags data1 7th bit on
#define SET_PARM_BOOT_FLAGS_VALID_ONE_TIME 0x80 // boot flags data1 8th bit on
#define SET_PARM_BOOT_FLAGS_VALID_PERMANENT \
0xC0 // boot flags data1 7 & 8 bit
// on
std::unique_ptr<phosphor::ipmi::Timer> identifyTimer = nullptr;
constexpr size_t SIZE_MAC = 18;
constexpr size_t SIZE_BOOT_OPTION = (uint8_t)
BootOptionResponseSize::OPAL_NETWORK_SETTINGS; // Maximum size of the boot
// option parametrs
constexpr size_t SIZE_PREFIX = 7;
constexpr size_t MAX_PREFIX_VALUE = 32;
constexpr size_t SIZE_COOKIE = 4;
constexpr size_t SIZE_VERSION = 2;
constexpr size_t DEFAULT_IDENTIFY_TIME_OUT = 15;
// PetiBoot-Specific
static constexpr uint8_t net_conf_initial_bytes[] = {0x80, 0x21, 0x70, 0x62,
0x21, 0x00, 0x01, 0x06};
static constexpr size_t COOKIE_OFFSET = 1;
static constexpr size_t VERSION_OFFSET = 5;
static constexpr size_t ADDR_SIZE_OFFSET = 8;
static constexpr size_t MAC_OFFSET = 9;
static constexpr size_t ADDRTYPE_OFFSET = 16;
static constexpr size_t IPADDR_OFFSET = 17;
static constexpr size_t encIdentifyObjectsSize = 1;
static constexpr size_t chassisIdentifyReqLength = 2;
static constexpr size_t identifyIntervalPos = 0;
static constexpr size_t forceIdentifyPos = 1;
void register_netfn_chassis_functions() __attribute__((constructor));
// Host settings in dbus
// Service name should be referenced by connection name got via object mapper
const char* settings_object_name = "/org/openbmc/settings/host0";
const char* settings_intf_name = "org.freedesktop.DBus.Properties";
const char* host_intf_name = "org.openbmc.settings.Host";
const char* identify_led_object_name =
"/xyz/openbmc_project/led/groups/enclosure_identify";
constexpr auto SETTINGS_ROOT = "/";
constexpr auto SETTINGS_MATCH = "host0";
constexpr auto IP_INTERFACE = "xyz.openbmc_project.Network.IP";
constexpr auto MAC_INTERFACE = "xyz.openbmc_project.Network.MACAddress";
static constexpr auto chassisStateRoot = "/xyz/openbmc_project/state";
static constexpr auto chassisPOHStateIntf =
"xyz.openbmc_project.State.PowerOnHours";
static constexpr auto pOHCounterProperty = "POHCounter";
static constexpr auto match = "chassis0";
typedef struct
{
uint8_t cap_flags;
uint8_t fru_info_dev_addr;
uint8_t sdr_dev_addr;
uint8_t sel_dev_addr;
uint8_t system_management_dev_addr;
uint8_t bridge_dev_addr;
} __attribute__((packed)) ipmi_chassis_cap_t;
typedef struct
{
uint8_t cur_power_state;
uint8_t last_power_event;
uint8_t misc_power_state;
uint8_t front_panel_button_cap_status;
} __attribute__((packed)) ipmi_get_chassis_status_t;
/**
* @struct Get POH counter command response data
*/
struct GetPOHCountResponse
{
uint8_t minPerCount; ///< Minutes per count
uint8_t counterReading[4]; ///< Counter reading
} __attribute__((packed));
// Phosphor Host State manager
namespace State = sdbusplus::xyz::openbmc_project::State::server;
namespace fs = std::filesystem;
using namespace phosphor::logging;
using namespace sdbusplus::xyz::openbmc_project::Common::Error;
using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server;
namespace chassis
{
namespace internal
{
constexpr auto bootModeIntf = "xyz.openbmc_project.Control.Boot.Mode";
constexpr auto bootSourceIntf = "xyz.openbmc_project.Control.Boot.Source";
constexpr auto powerRestoreIntf =
"xyz.openbmc_project.Control.Power.RestorePolicy";
sdbusplus::bus::bus dbus(ipmid_get_sd_bus_connection());
namespace cache
{
settings::Objects objects(dbus,
{bootModeIntf, bootSourceIntf, powerRestoreIntf});
} // namespace cache
} // namespace internal
} // namespace chassis
namespace poh
{
constexpr auto minutesPerCount = 60;
} // namespace poh
// TODO : Can remove the below function as we have
// new functions which uses sdbusplus.
//
// openbmc/openbmc#1489
int dbus_get_property(const char* name, char** buf)
{
sd_bus_error error = SD_BUS_ERROR_NULL;
sd_bus_message* m = NULL;
sd_bus* bus = NULL;
char* temp_buf = NULL;
char* connection = NULL;
int r;
// Get the system bus where most system services are provided.
bus = ipmid_get_sd_bus_connection();
r = mapper_get_service(bus, settings_object_name, &connection);
if (r < 0)
{
log<level::ERR>("Failed to get connection",
entry("OBJ_NAME=%s", settings_object_name),
entry("ERRNO=0x%X", -r));
goto finish;
}
/*
* Bus, service, object path, interface and method are provided to call
* the method.
* Signatures and input arguments are provided by the arguments at the
* end.
*/
r = sd_bus_call_method(bus, connection, /* service to contact */
settings_object_name, /* object path */
settings_intf_name, /* interface name */
"Get", /* method name */
&error, /* object to return error in */
&m, /* return message on success */
"ss", /* input signature */
host_intf_name, /* first argument */
name); /* second argument */
if (r < 0)
{
log<level::ERR>("Failed to issue Get method call",
entry("ERRNO=0x%X", r));
goto finish;
}
/*
* The output should be parsed exactly the same as the output formatting
* specified.
*/
r = sd_bus_message_read(m, "v", "s", &temp_buf);
if (r < 0)
{
log<level::ERR>("Failed to parse response message",
entry("ERRNO=0x%X", -r));
goto finish;
}
*buf = strdup(temp_buf);
/* *buf = (char*) malloc(strlen(temp_buf));
if (*buf) {
strcpy(*buf, temp_buf);
}
*/
finish:
sd_bus_error_free(&error);
sd_bus_message_unref(m);
free(connection);
return r;
}
// TODO : Can remove the below function as we have
// new functions which uses sdbusplus.
//
// openbmc/openbmc#1489
int dbus_set_property(const char* name, const char* value)
{
sd_bus_error error = SD_BUS_ERROR_NULL;
sd_bus_message* m = NULL;
sd_bus* bus = NULL;
char* connection = NULL;
int r;
// Get the system bus where most system services are provided.
bus = ipmid_get_sd_bus_connection();
r = mapper_get_service(bus, settings_object_name, &connection);
if (r < 0)
{
log<level::ERR>("Failed to get connection",
entry("OBJ_NAME=%s", settings_object_name),
entry("ERRNO=0x%X", -r));
goto finish;
}
/*
* Bus, service, object path, interface and method are provided to call
* the method.
* Signatures and input arguments are provided by the arguments at the
* end.
*/
r = sd_bus_call_method(bus, connection, /* service to contact */
settings_object_name, /* object path */
settings_intf_name, /* interface name */
"Set", /* method name */
&error, /* object to return error in */
&m, /* return message on success */
"ssv", /* input signature */
host_intf_name, /* first argument */
name, /* second argument */
"s", /* third argument */
value); /* fourth argument */
if (r < 0)
{
log<level::ERR>("Failed to issue Set method call",
entry("ERRNO=0x%X", r));
goto finish;
}
finish:
sd_bus_error_free(&error);
sd_bus_message_unref(m);
free(connection);
return r;
}
struct get_sys_boot_options_t
{
uint8_t parameter;
uint8_t set;
uint8_t block;
} __attribute__((packed));
struct get_sys_boot_options_response_t
{
uint8_t version;
uint8_t parm;
uint8_t data[SIZE_BOOT_OPTION];
} __attribute__((packed));
struct set_sys_boot_options_t
{
uint8_t parameter;
uint8_t data[SIZE_BOOT_OPTION];
} __attribute__((packed));
int getHostNetworkData(get_sys_boot_options_response_t* respptr)
{
ipmi::PropertyMap properties;
int rc = 0;
uint8_t addrSize = ipmi::network::IPV4_ADDRESS_SIZE_BYTE;
try
{
// TODO There may be cases where an interface is implemented by multiple
// objects,to handle such cases we are interested on that object
// which are on interested busname.
// Currenlty mapper doesn't give the readable busname(gives busid)
// so we can't match with bus name so giving some object specific info
// as SETTINGS_MATCH.
// Later SETTINGS_MATCH will be replaced with busname.
sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection());
auto ipObjectInfo = ipmi::getDbusObject(bus, IP_INTERFACE,
SETTINGS_ROOT, SETTINGS_MATCH);
auto macObjectInfo = ipmi::getDbusObject(bus, MAC_INTERFACE,
SETTINGS_ROOT, SETTINGS_MATCH);
properties = ipmi::getAllDbusProperties(
bus, ipObjectInfo.second, ipObjectInfo.first, IP_INTERFACE);
auto variant = ipmi::getDbusProperty(bus, macObjectInfo.second,
macObjectInfo.first, MAC_INTERFACE,
"MACAddress");
auto ipAddress = properties["Address"].get<std::string>();
auto gateway = properties["Gateway"].get<std::string>();
auto prefix = properties["PrefixLength"].get<uint8_t>();
uint8_t isStatic =
(properties["Origin"].get<std::string>() ==
"xyz.openbmc_project.Network.IP.AddressOrigin.Static")
? 1
: 0;
auto MACAddress = variant.get<std::string>();
// it is expected here that we should get the valid data
// but we may also get the default values.
// Validation of the data is done by settings.
//
// if mac address is default mac address then
// don't send blank override.
if ((MACAddress == ipmi::network::DEFAULT_MAC_ADDRESS))
{
std::memset(respptr->data, 0, SIZE_BOOT_OPTION);
rc = -1;
return rc;
}
// if addr is static then ipaddress,gateway,prefix
// should not be default one,don't send blank override.
if (isStatic)
{
if ((ipAddress == ipmi::network::DEFAULT_ADDRESS) ||
(gateway == ipmi::network::DEFAULT_ADDRESS) || (!prefix))
{
std::memset(respptr->data, 0, SIZE_BOOT_OPTION);
rc = -1;
return rc;
}
}
sscanf(
MACAddress.c_str(), ipmi::network::MAC_ADDRESS_FORMAT,
(respptr->data + MAC_OFFSET), (respptr->data + MAC_OFFSET + 1),
(respptr->data + MAC_OFFSET + 2), (respptr->data + MAC_OFFSET + 3),
(respptr->data + MAC_OFFSET + 4), (respptr->data + MAC_OFFSET + 5));
respptr->data[MAC_OFFSET + 6] = 0x00;
std::memcpy(respptr->data + ADDRTYPE_OFFSET, &isStatic,
sizeof(isStatic));
uint8_t addressFamily = (properties["Type"].get<std::string>() ==
"xyz.openbmc_project.Network.IP.Protocol.IPv4")
? AF_INET
: AF_INET6;
addrSize = (addressFamily == AF_INET)
? ipmi::network::IPV4_ADDRESS_SIZE_BYTE
: ipmi::network::IPV6_ADDRESS_SIZE_BYTE;
// ipaddress and gateway would be in IPv4 format
inet_pton(addressFamily, ipAddress.c_str(),
(respptr->data + IPADDR_OFFSET));
uint8_t prefixOffset = IPADDR_OFFSET + addrSize;
std::memcpy(respptr->data + prefixOffset, &prefix, sizeof(prefix));
uint8_t gatewayOffset = prefixOffset + sizeof(decltype(prefix));
inet_pton(addressFamily, gateway.c_str(),
(respptr->data + gatewayOffset));
}
catch (InternalFailure& e)
{
commit<InternalFailure>();
std::memset(respptr->data, 0, SIZE_BOOT_OPTION);
rc = -1;
return rc;
}
// PetiBoot-Specific
// If success then copy the first 9 bytes to the data
std::memcpy(respptr->data, net_conf_initial_bytes,
sizeof(net_conf_initial_bytes));
std::memcpy(respptr->data + ADDR_SIZE_OFFSET, &addrSize, sizeof(addrSize));
#ifdef _IPMI_DEBUG_
std::printf("\n===Printing the IPMI Formatted Data========\n");
for (uint8_t pos = 0; pos < index; pos++)
{
std::printf("%02x ", respptr->data[pos]);
}
#endif
return rc;
}
/** @brief convert IPv4 and IPv6 addresses from binary to text form.
* @param[in] family - IPv4/Ipv6
* @param[in] data - req data pointer.
* @param[in] offset - offset in the data.
* @param[in] addrSize - size of the data which needs to be read from offset.
* @returns address in text form.
*/
std::string getAddrStr(uint8_t family, uint8_t* data, uint8_t offset,
uint8_t addrSize)
{
char ipAddr[INET6_ADDRSTRLEN] = {};
switch (family)
{
case AF_INET:
{
struct sockaddr_in addr4
{
};
std::memcpy(&addr4.sin_addr.s_addr, &data[offset], addrSize);
inet_ntop(AF_INET, &addr4.sin_addr, ipAddr, INET_ADDRSTRLEN);
break;
}
case AF_INET6:
{
struct sockaddr_in6 addr6
{
};
std::memcpy(&addr6.sin6_addr.s6_addr, &data[offset], addrSize);
inet_ntop(AF_INET6, &addr6.sin6_addr, ipAddr, INET6_ADDRSTRLEN);
break;
}
default:
{
return {};
}
}
return ipAddr;
}
int setHostNetworkData(set_sys_boot_options_t* reqptr)
{
using namespace std::string_literals;
std::string host_network_config;
char mac[]{"00:00:00:00:00:00"};
std::string ipAddress, gateway;
char addrOrigin{0};
uint8_t addrSize{0};
std::string addressOrigin =
"xyz.openbmc_project.Network.IP.AddressOrigin.DHCP";
std::string addressType = "xyz.openbmc_project.Network.IP.Protocol.IPv4";
uint8_t prefix{0};
uint32_t zeroCookie = 0;
uint8_t family = AF_INET;
// cookie starts from second byte
// version starts from sixth byte
try
{
do
{
// cookie == 0x21 0x70 0x62 0x21
if (memcmp(&(reqptr->data[COOKIE_OFFSET]),
(net_conf_initial_bytes + COOKIE_OFFSET),
SIZE_COOKIE) != 0)
{
// cookie == 0
if (memcmp(&(reqptr->data[COOKIE_OFFSET]), &zeroCookie,
SIZE_COOKIE) == 0)
{
// need to zero out the network settings.
break;
}
log<level::ERR>("Invalid Cookie");
elog<InternalFailure>();
}
// vesion == 0x00 0x01
if (memcmp(&(reqptr->data[VERSION_OFFSET]),
(net_conf_initial_bytes + VERSION_OFFSET),
SIZE_VERSION) != 0)
{
log<level::ERR>("Invalid Version");
elog<InternalFailure>();
}
std::snprintf(
mac, SIZE_MAC, ipmi::network::MAC_ADDRESS_FORMAT,
reqptr->data[MAC_OFFSET], reqptr->data[MAC_OFFSET + 1],
reqptr->data[MAC_OFFSET + 2], reqptr->data[MAC_OFFSET + 3],
reqptr->data[MAC_OFFSET + 4], reqptr->data[MAC_OFFSET + 5]);
std::memcpy(&addrOrigin, &(reqptr->data[ADDRTYPE_OFFSET]),
sizeof(decltype(addrOrigin)));
if (addrOrigin)
{
addressOrigin =
"xyz.openbmc_project.Network.IP.AddressOrigin.Static";
}
// Get the address size
std::memcpy(&addrSize, &reqptr->data[ADDR_SIZE_OFFSET],
sizeof(addrSize));
uint8_t prefixOffset = IPADDR_OFFSET + addrSize;
std::memcpy(&prefix, &(reqptr->data[prefixOffset]),
sizeof(decltype(prefix)));
uint8_t gatewayOffset = prefixOffset + sizeof(decltype(prefix));
if (addrSize != ipmi::network::IPV4_ADDRESS_SIZE_BYTE)
{
addressType = "xyz.openbmc_project.Network.IP.Protocol.IPv6";
family = AF_INET6;
}
ipAddress =
getAddrStr(family, reqptr->data, IPADDR_OFFSET, addrSize);
gateway = getAddrStr(family, reqptr->data, gatewayOffset, addrSize);
} while (0);
// Cookie == 0 or it is a valid cookie
host_network_config += "ipaddress="s + ipAddress + ",prefix="s +
std::to_string(prefix) + ",gateway="s + gateway +
",mac="s + mac + ",addressOrigin="s +
addressOrigin;
sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection());
auto ipObjectInfo = ipmi::getDbusObject(bus, IP_INTERFACE,
SETTINGS_ROOT, SETTINGS_MATCH);
auto macObjectInfo = ipmi::getDbusObject(bus, MAC_INTERFACE,
SETTINGS_ROOT, SETTINGS_MATCH);
// set the dbus property
ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first,
IP_INTERFACE, "Address", std::string(ipAddress));
ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first,
IP_INTERFACE, "PrefixLength", prefix);
ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first,
IP_INTERFACE, "Origin", addressOrigin);
ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first,
IP_INTERFACE, "Gateway", std::string(gateway));
ipmi::setDbusProperty(
bus, ipObjectInfo.second, ipObjectInfo.first, IP_INTERFACE, "Type",
std::string("xyz.openbmc_project.Network.IP.Protocol.IPv4"));
ipmi::setDbusProperty(bus, macObjectInfo.second, macObjectInfo.first,
MAC_INTERFACE, "MACAddress", std::string(mac));
log<level::DEBUG>(
"Network configuration changed",
entry("NETWORKCONFIG=%s", host_network_config.c_str()));
}
catch (InternalFailure& e)
{
commit<InternalFailure>();
return -1;
}
return 0;
}
uint32_t getPOHCounter()
{
sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()};
auto chassisStateObj =
ipmi::getDbusObject(bus, chassisPOHStateIntf, chassisStateRoot, match);
auto service =
ipmi::getService(bus, chassisPOHStateIntf, chassisStateObj.first);
auto propValue =
ipmi::getDbusProperty(bus, service, chassisStateObj.first,
chassisPOHStateIntf, pOHCounterProperty);
return propValue.get<uint32_t>();
}
ipmi_ret_t ipmi_chassis_wildcard(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
// Status code.
ipmi_ret_t rc = IPMI_CC_INVALID;
*data_len = 0;
return rc;
}
ipmi_ret_t ipmi_get_chassis_cap(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
// sd_bus error
ipmi_ret_t rc = IPMI_CC_OK;
ipmi_chassis_cap_t chassis_cap{};
*data_len = sizeof(ipmi_chassis_cap_t);
// TODO: need future work. Get those flag from MRW.
// capabilities flags
// [7..4] - reserved
// [3] – 1b = provides power interlock (IPM 1.5)
// [2] – 1b = provides Diagnostic Interrupt (FP NMI)
// [1] – 1b = provides “Front Panel Lockout” (indicates that the chassis has
// capabilities
// to lock out external power control and reset button or front
// panel interfaces and/or detect tampering with those
// interfaces).
// [0] -1b = Chassis provides intrusion (physical security) sensor.
// set to default value 0x0.
chassis_cap.cap_flags = 0x0;
// Since we do not have a separate SDR Device/SEL Device/ FRU repository.
// The 20h was given as those 5 device addresses.
// Chassis FRU info Device Address
chassis_cap.fru_info_dev_addr = 0x20;
// Chassis SDR Device Address
chassis_cap.sdr_dev_addr = 0x20;
// Chassis SEL Device Address
chassis_cap.sel_dev_addr = 0x20;
// Chassis System Management Device Address
chassis_cap.system_management_dev_addr = 0x20;
// Chassis Bridge Device Address.
chassis_cap.bridge_dev_addr = 0x20;
std::memcpy(response, &chassis_cap, *data_len);
return rc;
}
//------------------------------------------
// Calls into Host State Manager Dbus object
//------------------------------------------
int initiate_state_transition(State::Host::Transition transition)
{
// OpenBMC Host State Manager dbus framework
constexpr auto HOST_STATE_MANAGER_ROOT = "/xyz/openbmc_project/state/host0";
constexpr auto HOST_STATE_MANAGER_IFACE = "xyz.openbmc_project.State.Host";
constexpr auto DBUS_PROPERTY_IFACE = "org.freedesktop.DBus.Properties";
constexpr auto PROPERTY = "RequestedHostTransition";
// sd_bus error
int rc = 0;
char* busname = NULL;
// SD Bus error report mechanism.
sd_bus_error bus_error = SD_BUS_ERROR_NULL;
// Gets a hook onto either a SYSTEM or SESSION bus
sd_bus* bus_type = ipmid_get_sd_bus_connection();
rc = mapper_get_service(bus_type, HOST_STATE_MANAGER_ROOT, &busname);
if (rc < 0)
{
log<level::ERR>(
"Failed to get bus name",
entry("ERRNO=0x%X, OBJPATH=%s", -rc, HOST_STATE_MANAGER_ROOT));
return rc;
}
// Convert to string equivalent of the passed in transition enum.
auto request = State::convertForMessage(transition);
rc = sd_bus_call_method(bus_type, // On the system bus
busname, // Service to contact
HOST_STATE_MANAGER_ROOT, // Object path
DBUS_PROPERTY_IFACE, // Interface name
"Set", // Method to be called
&bus_error, // object to return error
nullptr, // Response buffer if any
"ssv", // Takes 3 arguments
HOST_STATE_MANAGER_IFACE, PROPERTY, "s",
request.c_str());
if (rc < 0)
{
log<level::ERR>("Failed to initiate transition",
entry("ERRNO=0x%X, REQUEST=%s", -rc, request.c_str()));
}
else
{
log<level::INFO>("Transition request initiated successfully");
}
sd_bus_error_free(&bus_error);
free(busname);
return rc;
}
namespace power_policy
{
using namespace sdbusplus::xyz::openbmc_project::Control::Power::server;
using IpmiValue = uint8_t;
using DbusValue = RestorePolicy::Policy;
std::map<DbusValue, IpmiValue> dbusToIpmi = {
{RestorePolicy::Policy::AlwaysOff, 0x00},
{RestorePolicy::Policy::Restore, 0x01},
{RestorePolicy::Policy::AlwaysOn, 0x02}};
static constexpr uint8_t noChange = 0x03;
static constexpr uint8_t allSupport = 0x01 | 0x02 | 0x04;
static constexpr uint8_t policyBitMask = 0x07;
static constexpr uint8_t setPolicyReqLen = 1;
} // namespace power_policy
//----------------------------------------------------------------------
// Get Chassis Status commands
//----------------------------------------------------------------------
ipmi_ret_t ipmi_get_chassis_status(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
const char* objname = "/org/openbmc/control/power0";
const char* intf = "org.openbmc.control.Power";
sd_bus* bus = NULL;
sd_bus_message* reply = NULL;
int r = 0;
int pgood = 0;
char* busname = NULL;
ipmi_ret_t rc = IPMI_CC_OK;
ipmi_get_chassis_status_t chassis_status{};
uint8_t s = 0;
using namespace chassis::internal;
using namespace chassis::internal::cache;
using namespace power_policy;
const auto& powerRestoreSetting = objects.map.at(powerRestoreIntf).front();
auto method = dbus.new_method_call(
objects.service(powerRestoreSetting, powerRestoreIntf).c_str(),
powerRestoreSetting.c_str(), ipmi::PROP_INTF, "Get");
method.append(powerRestoreIntf, "PowerRestorePolicy");
auto resp = dbus.call(method);
if (resp.is_method_error())
{
log<level::ERR>("Error in PowerRestorePolicy Get");
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
sdbusplus::message::variant<std::string> result;
resp.read(result);
auto powerRestore =
RestorePolicy::convertPolicyFromString(result.get<std::string>());
*data_len = 4;
bus = ipmid_get_sd_bus_connection();
r = mapper_get_service(bus, objname, &busname);
if (r < 0)
{
log<level::ERR>("Failed to get bus name", entry("ERRNO=0x%X", -r));
rc = IPMI_CC_UNSPECIFIED_ERROR;
goto finish;
}
r = sd_bus_get_property(bus, busname, objname, intf, "pgood", NULL, &reply,
"i");
if (r < 0)
{
log<level::ERR>("Failed to call sd_bus_get_property",
entry("PROPERTY=%s", "pgood"), entry("ERRNO=0x%X", -r),
entry("BUS=%s", busname), entry("PATH=%s", objname),
entry("INTERFACE=%s", intf));
rc = IPMI_CC_UNSPECIFIED_ERROR;
goto finish;
}
r = sd_bus_message_read(reply, "i", &pgood);
if (r < 0)
{
log<level::ERR>("Failed to read sensor:", entry("ERRNO=0x%X", -r));
rc = IPMI_CC_UNSPECIFIED_ERROR;
goto finish;
}
s = dbusToIpmi.at(powerRestore);
// Current Power State
// [7] reserved
// [6..5] power restore policy
// 00b = chassis stays powered off after AC/mains returns
// 01b = after AC returns, power is restored to the state that was
// in effect when AC/mains was lost.
// 10b = chassis always powers up after AC/mains returns
// 11b = unknow
// Set to 00b, by observing the hardware behavior.
// Do we need to define a dbus property to identify the restore
// policy?
// [4] power control fault
// 1b = controller attempted to turn system power on or off, but
// system did not enter desired state.
// Set to 0b, since We don't support it..
// [3] power fault
// 1b = fault detected in main power subsystem.
// set to 0b. for we don't support it.
// [2] 1b = interlock (chassis is presently shut down because a chassis
// panel interlock switch is active). (IPMI 1.5)
// set to 0b, for we don't support it.
// [1] power overload
// 1b = system shutdown because of power overload condition.
// set to 0b, for we don't support it.
// [0] power is on
// 1b = system power is on
// 0b = system power is off(soft-off S4/S5, or mechanical off)
chassis_status.cur_power_state = ((s & 0x3) << 5) | (pgood & 0x1);
// Last Power Event
// [7..5] – reserved
// [4] – 1b = last ‘Power is on’ state was entered via IPMI command
// [3] – 1b = last power down caused by power fault
// [2] – 1b = last power down caused by a power interlock being activated
// [1] – 1b = last power down caused by a Power overload
// [0] – 1b = AC failed
// set to 0x0, for we don't support these fields.
chassis_status.last_power_event = 0;
// Misc. Chassis State
// [7] – reserved
// [6] – 1b = Chassis Identify command and state info supported (Optional)
// 0b = Chassis Identify command support unspecified via this command.
// (The Get Command Support command , if implemented, would still
// indicate support for the Chassis Identify command)
// [5..4] – Chassis Identify State. Mandatory when bit[6] =1b, reserved
// (return
// as 00b) otherwise. Returns the present chassis identify state.
// Refer to the Chassis Identify command for more info.
// 00b = chassis identify state = Off
// 01b = chassis identify state = Temporary(timed) On
// 10b = chassis identify state = Indefinite On
// 11b = reserved
// [3] – 1b = Cooling/fan fault detected
// [2] – 1b = Drive Fault
// [1] – 1b = Front Panel Lockout active (power off and reset via chassis
// push-buttons disabled.)
// [0] – 1b = Chassis Intrusion active
// set to 0, for we don't support them.
chassis_status.misc_power_state = 0;
// Front Panel Button Capabilities and disable/enable status(Optional)
// set to 0, for we don't support them.
chassis_status.front_panel_button_cap_status = 0;
// Pack the actual response
std::memcpy(response, &chassis_status, *data_len);
finish:
free(busname);
reply = sd_bus_message_unref(reply);
return rc;
}
//-------------------------------------------------------------
// Send a command to SoftPowerOff application to stop any timer
//-------------------------------------------------------------
int stop_soft_off_timer()
{
constexpr auto iface = "org.freedesktop.DBus.Properties";
constexpr auto soft_off_iface = "xyz.openbmc_project.Ipmi.Internal."
"SoftPowerOff";
constexpr auto property = "ResponseReceived";
constexpr auto value = "xyz.openbmc_project.Ipmi.Internal."
"SoftPowerOff.HostResponse.HostShutdown";
// Get the system bus where most system services are provided.
auto bus = ipmid_get_sd_bus_connection();
// Get the service name
// TODO openbmc/openbmc#1661 - Mapper refactor
//
// See openbmc/openbmc#1743 for some details but high level summary is that
// for now the code will directly call the soft off interface due to a
// race condition with mapper usage
//
// char *busname = nullptr;
// auto r = mapper_get_service(bus, SOFTOFF_OBJPATH, &busname);
// if (r < 0)
//{
// fprintf(stderr, "Failed to get %s bus name: %s\n",
// SOFTOFF_OBJPATH, -r);
// return r;
//}
// No error object or reply expected.
int rc = sd_bus_call_method(bus, SOFTOFF_BUSNAME, SOFTOFF_OBJPATH, iface,
"Set", nullptr, nullptr, "ssv", soft_off_iface,
property, "s", value);
if (rc < 0)
{
log<level::ERR>("Failed to set property in SoftPowerOff object",
entry("ERRNO=0x%X", -rc));
}
// TODO openbmc/openbmc#1661 - Mapper refactor
// free(busname);
return rc;
}
//----------------------------------------------------------------------
// Create file to indicate there is no need for softoff notification to host
//----------------------------------------------------------------------
void indicate_no_softoff_needed()
{
fs::path path{HOST_INBAND_REQUEST_DIR};
if (!fs::is_directory(path))
{
fs::create_directory(path);
}
// Add the host instance (default 0 for now) to the file name
std::string file{HOST_INBAND_REQUEST_FILE};
auto size = std::snprintf(nullptr, 0, file.c_str(), 0);
size++; // null
std::unique_ptr<char[]> buf(new char[size]);
std::snprintf(buf.get(), size, file.c_str(), 0);
// Append file name to directory and create it
path /= buf.get();
std::ofstream(path.c_str());
}
//----------------------------------------------------------------------
// Chassis Control commands
//----------------------------------------------------------------------
ipmi_ret_t ipmi_chassis_control(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
// Error from power off.
int rc = 0;
// No response for this command.
*data_len = 0;
// Catch the actual operaton by peeking into request buffer
uint8_t chassis_ctrl_cmd = *(uint8_t*)request;
switch (chassis_ctrl_cmd)
{
case CMD_POWER_ON:
rc = initiate_state_transition(State::Host::Transition::On);
break;
case CMD_POWER_OFF:
// This path would be hit in 2 conditions.
// 1: When user asks for power off using ipmi chassis command 0x04
// 2: Host asking for power off post shutting down.
// If it's a host requested power off, then need to nudge Softoff
// application that it needs to stop the watchdog timer if running.
// If it is a user requested power off, then this is not really
// needed. But then we need to differentiate between user and host
// calling this same command
// For now, we are going ahead with trying to nudge the soft off and
// interpret the failure to do so as a non softoff case
rc = stop_soft_off_timer();
// Only request the Off transition if the soft power off
// application is not running
if (rc < 0)
{
// First create a file to indicate to the soft off application
// that it should not run. Not doing this will result in State
// manager doing a default soft power off when asked for power
// off.
indicate_no_softoff_needed();
// Now request the shutdown
rc = initiate_state_transition(State::Host::Transition::Off);
}
else
{
log<level::INFO>("Soft off is running, so let shutdown target "
"stop the host");
}
break;
case CMD_HARD_RESET:
case CMD_POWER_CYCLE:
// SPEC has a section that says certain implementations can trigger
// PowerOn if power is Off when a command to power cycle is
// requested
// First create a file to indicate to the soft off application
// that it should not run since this is a direct user initiated
// power reboot request (i.e. a reboot request that is not
// originating via a soft power off SMS request)
indicate_no_softoff_needed();
rc = initiate_state_transition(State::Host::Transition::Reboot);
break;
case CMD_SOFT_OFF_VIA_OVER_TEMP:
// Request Host State Manager to do a soft power off
rc = initiate_state_transition(State::Host::Transition::Off);
break;
default:
{
log<level::ERR>("Invalid Chassis Control command",
entry("CMD=0x%X", chassis_ctrl_cmd));
rc = -1;
}
}
return ((rc < 0) ? IPMI_CC_INVALID : IPMI_CC_OK);
}
/** @brief Return D-Bus connection string to enclosure identify LED object
*
* @param[in, out] connection - connection to D-Bus object
* @return a IPMI return code
*/
std::string getEnclosureIdentifyConnection()
{
// lookup enclosure_identify group owner(s) in mapper
auto mapperCall = chassis::internal::dbus.new_method_call(
ipmi::MAPPER_BUS_NAME, ipmi::MAPPER_OBJ, ipmi::MAPPER_INTF,
"GetObject");
mapperCall.append(identify_led_object_name);
static const std::vector<std::string> interfaces = {
"xyz.openbmc_project.Led.Group"};
mapperCall.append(interfaces);
auto mapperReply = chassis::internal::dbus.call(mapperCall);
if (mapperReply.is_method_error())
{
log<level::ERR>("Chassis Identify: Error communicating to mapper.");
elog<InternalFailure>();
}
std::vector<std::pair<std::string, std::vector<std::string>>> mapperResp;
mapperReply.read(mapperResp);
if (mapperResp.size() != encIdentifyObjectsSize)
{
log<level::ERR>(
"Invalid number of enclosure identify objects.",
entry("ENC_IDENTITY_OBJECTS_SIZE=%d", mapperResp.size()));
elog<InternalFailure>();
}
auto pair = mapperResp[encIdentifyObjectsSize - 1];
return pair.first;
}
/** @brief Turn On/Off enclosure identify LED
*
* @param[in] flag - true to turn on LED, false to turn off
* @return a IPMI return code
*/
void enclosureIdentifyLed(bool flag)
{
using namespace chassis::internal;
std::string connection = std::move(getEnclosureIdentifyConnection());
auto led =
dbus.new_method_call(connection.c_str(), identify_led_object_name,
"org.freedesktop.DBus.Properties", "Set");
led.append("xyz.openbmc_project.Led.Group", "Asserted",
sdbusplus::message::variant<bool>(flag));
auto ledReply = dbus.call(led);
if (ledReply.is_method_error())
{
log<level::ERR>("Chassis Identify: Error Setting State On/Off\n",
entry("LED_STATE=%d", flag));
elog<InternalFailure>();
}
}
/** @brief Callback method to turn off LED
*/
void enclosureIdentifyLedOff()
{
try
{
enclosureIdentifyLed(false);
}
catch (const InternalFailure& e)
{
report<InternalFailure>();
}
}
/** @brief Create timer to turn on and off the enclosure LED
*/
void createIdentifyTimer()
{
if (!identifyTimer)
{
identifyTimer = std::make_unique<phosphor::ipmi::Timer>(
ipmid_get_sd_event_connection(), enclosureIdentifyLedOff);
}
}
ipmi_ret_t ipmi_chassis_identify(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
if (*data_len > chassisIdentifyReqLength)
{
return IPMI_CC_REQ_DATA_LEN_INVALID;
}
uint8_t identifyInterval =
*data_len > identifyIntervalPos
? (static_cast<uint8_t*>(request))[identifyIntervalPos]
: DEFAULT_IDENTIFY_TIME_OUT;
bool forceIdentify =
(*data_len == chassisIdentifyReqLength)
? (static_cast<uint8_t*>(request))[forceIdentifyPos] & 0x01
: false;
if (identifyInterval || forceIdentify)
{
// stop the timer if already started, for force identify we should
// not turn off LED
identifyTimer->setTimer(SD_EVENT_OFF);
try
{
enclosureIdentifyLed(true);
}
catch (const InternalFailure& e)
{
report<InternalFailure>();
return IPMI_CC_RESPONSE_ERROR;
}
if (forceIdentify)
{
return IPMI_CC_OK;
}
// start the timer
auto time = std::chrono::duration_cast<std::chrono::microseconds>(
std::chrono::seconds(identifyInterval));
identifyTimer->startTimer(time);
}
else if (!identifyInterval)
{
identifyTimer->setTimer(SD_EVENT_OFF);
enclosureIdentifyLedOff();
}
return IPMI_CC_OK;
}
namespace boot_options
{
using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server;
using IpmiValue = uint8_t;
constexpr auto ipmiDefault = 0;
std::map<IpmiValue, Source::Sources> sourceIpmiToDbus = {
{0x01, Source::Sources::Network},
{0x02, Source::Sources::Disk},
{0x05, Source::Sources::ExternalMedia},
{ipmiDefault, Source::Sources::Default}};
std::map<IpmiValue, Mode::Modes> modeIpmiToDbus = {
{0x03, Mode::Modes::Safe},
{0x06, Mode::Modes::Setup},
{ipmiDefault, Mode::Modes::Regular}};
std::map<Source::Sources, IpmiValue> sourceDbusToIpmi = {
{Source::Sources::Network, 0x01},
{Source::Sources::Disk, 0x02},
{Source::Sources::ExternalMedia, 0x05},
{Source::Sources::Default, ipmiDefault}};
std::map<Mode::Modes, IpmiValue> modeDbusToIpmi = {
{Mode::Modes::Safe, 0x03},
{Mode::Modes::Setup, 0x06},
{Mode::Modes::Regular, ipmiDefault}};
} // namespace boot_options
/** @brief Set the property value for boot source
* @param[in] source - boot source value
* @return On failure return IPMI error.
*/
static ipmi_ret_t setBootSource(const Source::Sources& source)
{
using namespace chassis::internal;
using namespace chassis::internal::cache;
sdbusplus::message::variant<std::string> property =
convertForMessage(source);
auto bootSetting = settings::boot::setting(objects, bootSourceIntf);
const auto& bootSourceSetting = std::get<settings::Path>(bootSetting);
auto method = dbus.new_method_call(
objects.service(bootSourceSetting, bootSourceIntf).c_str(),
bootSourceSetting.c_str(), ipmi::PROP_INTF, "Set");
method.append(bootSourceIntf, "BootSource", property);
auto reply = dbus.call(method);
if (reply.is_method_error())
{
log<level::ERR>("Error in BootSource Set");
report<InternalFailure>();
return IPMI_CC_UNSPECIFIED_ERROR;
}
return IPMI_CC_OK;
}
/** @brief Set the property value for boot mode
* @param[in] mode - boot mode value
* @return On failure return IPMI error.
*/
static ipmi_ret_t setBootMode(const Mode::Modes& mode)
{
using namespace chassis::internal;
using namespace chassis::internal::cache;
sdbusplus::message::variant<std::string> property = convertForMessage(mode);
auto bootSetting = settings::boot::setting(objects, bootModeIntf);
const auto& bootModeSetting = std::get<settings::Path>(bootSetting);
auto method = dbus.new_method_call(
objects.service(bootModeSetting, bootModeIntf).c_str(),
bootModeSetting.c_str(), ipmi::PROP_INTF, "Set");
method.append(bootModeIntf, "BootMode", property);
auto reply = dbus.call(method);
if (reply.is_method_error())
{
log<level::ERR>("Error in BootMode Set");
report<InternalFailure>();
return IPMI_CC_UNSPECIFIED_ERROR;
}
return IPMI_CC_OK;
}
ipmi_ret_t ipmi_chassis_get_sys_boot_options(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
using namespace boot_options;
ipmi_ret_t rc = IPMI_CC_PARM_NOT_SUPPORTED;
char* p = NULL;
get_sys_boot_options_response_t* resp =
(get_sys_boot_options_response_t*)response;
get_sys_boot_options_t* reqptr = (get_sys_boot_options_t*)request;
IpmiValue bootOption = ipmiDefault;
std::memset(resp, 0, sizeof(*resp));
resp->version = SET_PARM_VERSION;
resp->parm = 5;
resp->data[0] = SET_PARM_BOOT_FLAGS_VALID_ONE_TIME;
/*
* Parameter #5 means boot flags. Please refer to 28.13 of ipmi doc.
* This is the only parameter used by petitboot.
*/
if (reqptr->parameter ==
static_cast<uint8_t>(BootOptionParameter::BOOT_FLAGS))
{
*data_len = static_cast<uint8_t>(BootOptionResponseSize::BOOT_FLAGS);
using namespace chassis::internal;
using namespace chassis::internal::cache;
try
{
auto bootSetting = settings::boot::setting(objects, bootSourceIntf);
const auto& bootSourceSetting =
std::get<settings::Path>(bootSetting);
auto oneTimeEnabled =
std::get<settings::boot::OneTimeEnabled>(bootSetting);
auto method = dbus.new_method_call(
objects.service(bootSourceSetting, bootSourceIntf).c_str(),
bootSourceSetting.c_str(), ipmi::PROP_INTF, "Get");
method.append(bootSourceIntf, "BootSource");
auto reply = dbus.call(method);
if (reply.is_method_error())
{
log<level::ERR>("Error in BootSource Get");
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
sdbusplus::message::variant<std::string> result;
reply.read(result);
auto bootSource =
Source::convertSourcesFromString(result.get<std::string>());
bootSetting = settings::boot::setting(objects, bootModeIntf);
const auto& bootModeSetting = std::get<settings::Path>(bootSetting);
method = dbus.new_method_call(
objects.service(bootModeSetting, bootModeIntf).c_str(),
bootModeSetting.c_str(), ipmi::PROP_INTF, "Get");
method.append(bootModeIntf, "BootMode");
reply = dbus.call(method);
if (reply.is_method_error())
{
log<level::ERR>("Error in BootMode Get");
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
reply.read(result);
auto bootMode =
Mode::convertModesFromString(result.get<std::string>());
bootOption = sourceDbusToIpmi.at(bootSource);
if ((Mode::Modes::Regular == bootMode) &&
(Source::Sources::Default == bootSource))
{
bootOption = ipmiDefault;
}
else if (Source::Sources::Default == bootSource)
{
bootOption = modeDbusToIpmi.at(bootMode);
}
resp->data[1] = (bootOption << 2);
resp->data[0] = oneTimeEnabled
? SET_PARM_BOOT_FLAGS_VALID_ONE_TIME
: SET_PARM_BOOT_FLAGS_VALID_PERMANENT;
rc = IPMI_CC_OK;
}
catch (InternalFailure& e)
{
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
}
else if (reqptr->parameter ==
static_cast<uint8_t>(BootOptionParameter::OPAL_NETWORK_SETTINGS))
{
*data_len =
static_cast<uint8_t>(BootOptionResponseSize::OPAL_NETWORK_SETTINGS);
resp->parm =
static_cast<uint8_t>(BootOptionParameter::OPAL_NETWORK_SETTINGS);
int ret = getHostNetworkData(resp);
if (ret < 0)
{
log<level::ERR>(
"getHostNetworkData failed for get_sys_boot_options.");
rc = IPMI_CC_UNSPECIFIED_ERROR;
}
else
rc = IPMI_CC_OK;
}
else
{
log<level::ERR>("Unsupported parameter",
entry("PARAM=0x%x", reqptr->parameter));
}
if (p)
free(p);
if (rc == IPMI_CC_OK)
{
*data_len += 2;
}
return rc;
}
ipmi_ret_t ipmi_chassis_set_sys_boot_options(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request,
ipmi_response_t response,
ipmi_data_len_t data_len,
ipmi_context_t context)
{
using namespace boot_options;
ipmi_ret_t rc = IPMI_CC_OK;
set_sys_boot_options_t* reqptr = (set_sys_boot_options_t*)request;
std::printf("IPMI SET_SYS_BOOT_OPTIONS reqptr->parameter =[%d]\n",
reqptr->parameter);
// This IPMI command does not have any resposne data
*data_len = 0;
/* 000101
* Parameter #5 means boot flags. Please refer to 28.13 of ipmi doc.
* This is the only parameter used by petitboot.
*/
if (reqptr->parameter == (uint8_t)BootOptionParameter::BOOT_FLAGS)
{
IpmiValue bootOption = ((reqptr->data[1] & 0x3C) >> 2);
using namespace chassis::internal;
using namespace chassis::internal::cache;
auto oneTimeEnabled = false;
constexpr auto enabledIntf = "xyz.openbmc_project.Object.Enable";
constexpr auto oneTimePath =
"/xyz/openbmc_project/control/host0/boot/one_time";
try
{
bool permanent =
(reqptr->data[0] & SET_PARM_BOOT_FLAGS_PERMANENT) ==
SET_PARM_BOOT_FLAGS_PERMANENT;
auto bootSetting = settings::boot::setting(objects, bootSourceIntf);
oneTimeEnabled =
std::get<settings::boot::OneTimeEnabled>(bootSetting);
/*
* Check if the current boot setting is onetime or permanent, if the
* request in the command is otherwise, then set the "Enabled"
* property in one_time object path to 'True' to indicate onetime
* and 'False' to indicate permanent.
*
* Once the onetime/permanent setting is applied, then the bootMode
* and bootSource is updated for the corresponding object.
*/
if ((permanent && oneTimeEnabled) ||
(!permanent && !oneTimeEnabled))
{
auto service = ipmi::getService(dbus, enabledIntf, oneTimePath);
ipmi::setDbusProperty(dbus, service, oneTimePath, enabledIntf,
"Enabled", !permanent);
}
auto modeItr = modeIpmiToDbus.find(bootOption);
auto sourceItr = sourceIpmiToDbus.find(bootOption);
if (sourceIpmiToDbus.end() != sourceItr)
{
rc = setBootSource(sourceItr->second);
if (rc != IPMI_CC_OK)
{
*data_len = 0;
return rc;
}
// If a set boot device is mapping to a boot source, then reset
// the boot mode D-Bus property to default.
// This way the ipmid code can determine which property is not
// at the default value
if (sourceItr->second != Source::Sources::Default)
{
setBootMode(Mode::Modes::Regular);
}
}
if (modeIpmiToDbus.end() != modeItr)
{
rc = setBootMode(modeItr->second);
if (rc != IPMI_CC_OK)
{
*data_len = 0;
return rc;
}
// If a set boot device is mapping to a boot mode, then reset
// the boot source D-Bus property to default.
// This way the ipmid code can determine which property is not
// at the default value
if (modeItr->second != Mode::Modes::Regular)
{
setBootSource(Source::Sources::Default);
}
}
}
catch (InternalFailure& e)
{
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
}
else if (reqptr->parameter ==
(uint8_t)BootOptionParameter::OPAL_NETWORK_SETTINGS)
{
int ret = setHostNetworkData(reqptr);
if (ret < 0)
{
log<level::ERR>(
"setHostNetworkData failed for set_sys_boot_options");
rc = IPMI_CC_UNSPECIFIED_ERROR;
}
}
else if (reqptr->parameter ==
static_cast<uint8_t>(BootOptionParameter::BOOT_INFO))
{
// Handle parameter #4 and return command completed normally
// (IPMI_CC_OK). There is no implementation in OpenBMC for this
// parameter. This is added to support the ipmitool command `chassis
// bootdev` which sends set on parameter #4, before setting the boot
// flags.
rc = IPMI_CC_OK;
}
else
{
log<level::ERR>("Unsupported parameter",
entry("PARAM=0x%x", reqptr->parameter));
rc = IPMI_CC_PARM_NOT_SUPPORTED;
}
return rc;
}
ipmi_ret_t ipmiGetPOHCounter(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
ipmi_request_t request, ipmi_response_t response,
ipmi_data_len_t data_len, ipmi_context_t context)
{
// sd_bus error
ipmi_ret_t rc = IPMI_CC_OK;
auto resptr = reinterpret_cast<GetPOHCountResponse*>(response);
try
{
auto pohCounter = getPOHCounter();
resptr->counterReading[0] = pohCounter;
resptr->counterReading[1] = pohCounter >> 8;
resptr->counterReading[2] = pohCounter >> 16;
resptr->counterReading[3] = pohCounter >> 24;
}
catch (std::exception& e)
{
log<level::ERR>(e.what());
return IPMI_CC_UNSPECIFIED_ERROR;
}
resptr->minPerCount = poh::minutesPerCount;
*data_len = sizeof(GetPOHCountResponse);
return rc;
}
ipmi_ret_t ipmi_chassis_set_power_restore_policy(
ipmi_netfn_t netfn, ipmi_cmd_t cmd, ipmi_request_t request,
ipmi_response_t response, ipmi_data_len_t data_len, ipmi_context_t context)
{
auto* reqptr = reinterpret_cast<uint8_t*>(request);
auto* resptr = reinterpret_cast<uint8_t*>(response);
uint8_t reqPolicy = 0;
power_policy::DbusValue value =
power_policy::RestorePolicy::Policy::AlwaysOff;
if (*data_len != power_policy::setPolicyReqLen)
{
phosphor::logging::log<level::ERR>("Unsupported request length",
entry("LEN=0x%x", *data_len));
*data_len = 0;
return IPMI_CC_REQ_DATA_LEN_INVALID;
}
reqPolicy = *reqptr & power_policy::policyBitMask;
if (reqPolicy > power_policy::noChange)
{
phosphor::logging::log<level::ERR>("Reserved request parameter",
entry("REQ=0x%x", reqPolicy));
*data_len = 0;
return IPMI_CC_PARM_NOT_SUPPORTED;
}
if (reqPolicy == power_policy::noChange)
{
// just return the supported policy
*resptr = power_policy::allSupport;
*data_len = power_policy::setPolicyReqLen;
return IPMI_CC_OK;
}
for (auto const& it : power_policy::dbusToIpmi)
{
if (it.second == reqPolicy)
{
value = it.first;
break;
}
}
try
{
const settings::Path& powerRestoreSetting =
chassis::internal::cache::objects.map
.at(chassis::internal::powerRestoreIntf)
.front();
sdbusplus::message::variant<std::string> property =
convertForMessage(value);
auto method = chassis::internal::dbus.new_method_call(
chassis::internal::cache::objects
.service(powerRestoreSetting,
chassis::internal::powerRestoreIntf)
.c_str(),
powerRestoreSetting.c_str(), ipmi::PROP_INTF, "Set");
method.append(chassis::internal::powerRestoreIntf, "PowerRestorePolicy",
property);
auto reply = chassis::internal::dbus.call(method);
if (reply.is_method_error())
{
phosphor::logging::log<level::ERR>("Unspecified Error");
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
}
catch (InternalFailure& e)
{
report<InternalFailure>();
*data_len = 0;
return IPMI_CC_UNSPECIFIED_ERROR;
}
*data_len = power_policy::setPolicyReqLen;
return IPMI_CC_OK;
}
void register_netfn_chassis_functions()
{
createIdentifyTimer();
// <Wildcard Command>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_WILDCARD, NULL,
ipmi_chassis_wildcard, PRIVILEGE_USER);
// Get Chassis Capabilities
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_GET_CHASSIS_CAP, NULL,
ipmi_get_chassis_cap, PRIVILEGE_USER);
// <Get System Boot Options>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_GET_SYS_BOOT_OPTIONS, NULL,
ipmi_chassis_get_sys_boot_options,
PRIVILEGE_OPERATOR);
// <Get Chassis Status>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_CHASSIS_STATUS, NULL,
ipmi_get_chassis_status, PRIVILEGE_USER);
// <Chassis Control>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_CHASSIS_CONTROL, NULL,
ipmi_chassis_control, PRIVILEGE_OPERATOR);
// <Chassis Identify>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_CHASSIS_IDENTIFY, NULL,
ipmi_chassis_identify, PRIVILEGE_OPERATOR);
// <Set System Boot Options>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_SET_SYS_BOOT_OPTIONS, NULL,
ipmi_chassis_set_sys_boot_options,
PRIVILEGE_OPERATOR);
// <Get POH Counter>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_GET_POH_COUNTER, NULL,
ipmiGetPOHCounter, PRIVILEGE_USER);
// <Set Power Restore Policy>
ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_SET_RESTORE_POLICY, NULL,
ipmi_chassis_set_power_restore_policy,
PRIVILEGE_OPERATOR);
}