| #ifndef __HOST_IPMID_IPMI_COMMON_H__ |
| #define __HOST_IPMID_IPMI_COMMON_H__ |
| #include <stdlib.h> |
| #include <systemd/sd-bus.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* |
| * Specifies the minimum privilege level required to execute the command |
| * This means the command can be executed at a given privilege level or higher |
| * privilege level. Those commands which can be executed via system interface |
| * only should use SYSTEM_INTERFACE |
| */ |
| enum CommandPrivilege { |
| PRIVILEGE_CALLBACK = 0x01, |
| PRIVILEGE_USER, |
| PRIVILEGE_OPERATOR, |
| PRIVILEGE_ADMIN, |
| PRIVILEGE_OEM, |
| SYSTEM_INTERFACE = 0xFF, |
| }; |
| |
| // length of Completion Code and its ALWAYS _1_ |
| #define IPMI_CC_LEN 1 |
| |
| // IPMI Net Function number as specified by IPMI V2.0 spec. |
| // Example : |
| // NETFUN_APP = (0x06 << 2), |
| typedef unsigned char ipmi_netfn_t; |
| |
| // IPMI Command for a Net Function number as specified by IPMI V2.0 spec. |
| typedef unsigned char ipmi_cmd_t; |
| |
| // Buffer containing data from sender of netfn and command as part of request |
| typedef void* ipmi_request_t; |
| |
| // This is the response buffer that the provider of [netfn,cmd] will send back |
| // to the caller. Provider will allocate the memory inside the handler and then |
| // will do a memcpy to this response buffer and also will set the data size |
| // parameter to the size of the buffer. |
| // EXAMPLE : |
| // unsigned char str[] = {0x00, 0x01, 0xFE, 0xFF, 0x0A, 0x01}; |
| // *data_len = 6; |
| // memcpy(response, &str, *data_len); |
| typedef void* ipmi_response_t; |
| |
| // This buffer contains any *user specific* data that is of interest only to the |
| // plugin. For a ipmi function router, this data is opaque. At the time of |
| // registering the plugin handlers, plugin may optionally allocate a memory and |
| // fill in whatever needed that will be of help during the actual handling of |
| // command. IPMID will just pass the netfn, cmd and also this data to plugins |
| // during the command handler invocation. |
| typedef void* ipmi_context_t; |
| |
| // Length of request / response buffer depending on whether the data is a |
| // request or a response from a plugin handler. |
| typedef size_t* ipmi_data_len_t; |
| |
| // Plugin function return the status code |
| typedef unsigned char ipmi_ret_t; |
| |
| typedef enum CommandPrivilege ipmi_cmd_privilege_t; |
| |
| // This is the callback handler that the plugin registers with IPMID. IPMI |
| // function router will then make a call to this callback handler with the |
| // necessary arguments of netfn, cmd, request, response, size and context. |
| typedef ipmi_ret_t (*ipmid_callback_t)(ipmi_netfn_t, ipmi_cmd_t, ipmi_request_t, |
| ipmi_response_t, ipmi_data_len_t, ipmi_context_t); |
| |
| // This is the constructor function that is called into by each plugin handlers. |
| // When ipmi sets up the callback handlers, a call is made to this with |
| // information of netfn, cmd, callback handler pointer and context data. |
| void ipmi_register_callback(ipmi_netfn_t, ipmi_cmd_t, ipmi_context_t, ipmid_callback_t, |
| ipmi_cmd_privilege_t); |
| |
| |
| unsigned short get_sel_reserve_id(void); |
| |
| // These are the command network functions, the response |
| // network functions are the function + 1. So to determine |
| // the proper network function which issued the command |
| // associated with a response, subtract 1. |
| // Note: these are also shifted left to make room for the LUN. |
| enum ipmi_net_fns |
| { |
| NETFUN_CHASSIS = 0x00, |
| NETFUN_BRIDGE = 0x02, |
| NETFUN_SENSOR = 0x04, |
| NETFUN_APP = 0x06, |
| NETFUN_FIRMWARE = 0x08, |
| NETFUN_STORAGE = 0x0a, |
| NETFUN_TRANSPORT = 0x0c, |
| NETFUN_GRPEXT = 0x2c, |
| NETFUN_NONE = 0x30, |
| NETFUN_OEM = 0x32, |
| NETFUN_IBM_OEM = 0x3A |
| }; |
| |
| // IPMI commands for net functions. Since this is to be used both by the ipmi |
| // function router and also the callback handler registration function, its put |
| // in this .H file. |
| enum ipmi_netfn_wild_card_cmd |
| { |
| IPMI_CMD_WILDCARD = 0xFF, |
| }; |
| |
| // Return (completion) codes from a IPMI operation as needed by IPMI V2.0 spec. |
| enum ipmi_return_codes |
| { |
| IPMI_CC_OK = 0x00, |
| IPMI_DCMI_CC_NO_ACTIVE_POWER_LIMIT = 0x80, |
| IPMI_CC_INVALID = 0xC1, |
| IPMI_CC_INVALID_RESERVATION_ID = 0xC5, |
| IPMI_CC_REQ_DATA_LEN_INVALID = 0xC7, |
| IPMI_CC_PARM_OUT_OF_RANGE = 0xC9, |
| IPMI_CC_SENSOR_INVALID = 0xCB, |
| IPMI_CC_INVALID_FIELD_REQUEST = 0xCC, |
| IPMI_CC_RESPONSE_ERROR = 0xCE, |
| IPMI_CC_INSUFFICIENT_PRIVILEGE = 0xD4, |
| IPMI_CC_UNSPECIFIED_ERROR = 0xFF, |
| }; |
| |
| sd_bus *ipmid_get_sd_bus_connection(void); |
| sd_event *ipmid_get_sd_event_connection(void); |
| sd_bus_slot *ipmid_get_sd_bus_slot(void); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |