transporthandler.hpp - openbmc/phosphor-host-ipmid - Gitiles

 #pragma once

 #include "app/channel.hpp"
 #include "user_channel/cipher_mgmt.hpp"

 #include <arpa/inet.h>
 #include <netinet/ether.h>

 #include <array>
 #include <bitset>
 #include <cinttypes>
 #include <cstdint>
 #include <cstring>
 #include <fstream>
 #include <functional>
 #include <ipmid/api-types.hpp>
 #include <ipmid/api.hpp>
 #include <ipmid/message.hpp>
 #include <ipmid/message/types.hpp>
 #include <ipmid/types.hpp>
 #include <ipmid/utils.hpp>
 #include <optional>
 #include <phosphor-logging/elog-errors.hpp>
 #include <phosphor-logging/elog.hpp>
 #include <phosphor-logging/log.hpp>
 #include <sdbusplus/bus.hpp>
 #include <sdbusplus/exception.hpp>
 #include <string>
 #include <string_view>
 #include <type_traits>
 #include <unordered_map>
 #include <unordered_set>
 #include <user_channel/channel_layer.hpp>
 #include <utility>
 #include <vector>
 #include <xyz/openbmc_project/Common/error.hpp>
 #include <xyz/openbmc_project/Network/EthernetInterface/server.hpp>
 #include <xyz/openbmc_project/Network/IP/server.hpp>
 #include <xyz/openbmc_project/Network/Neighbor/server.hpp>

 namespace ipmi
 {
 namespace transport
 {

 // D-Bus Network Daemon definitions
 constexpr auto PATH_ROOT = "/xyz/openbmc_project/network";
 constexpr auto INTF_ETHERNET = "xyz.openbmc_project.Network.EthernetInterface";
 constexpr auto INTF_IP = "xyz.openbmc_project.Network.IP";
 constexpr auto INTF_IP_CREATE = "xyz.openbmc_project.Network.IP.Create";
 constexpr auto INTF_MAC = "xyz.openbmc_project.Network.MACAddress";
 constexpr auto INTF_NEIGHBOR = "xyz.openbmc_project.Network.Neighbor";
 constexpr auto INTF_NEIGHBOR_CREATE_STATIC =
     "xyz.openbmc_project.Network.Neighbor.CreateStatic";
 constexpr auto INTF_VLAN = "xyz.openbmc_project.Network.VLAN";
 constexpr auto INTF_VLAN_CREATE = "xyz.openbmc_project.Network.VLAN.Create";

 /** @brief IPMI LAN Parameters */
 enum class LanParam : uint8_t
 {
     SetStatus = 0,
     AuthSupport = 1,
     AuthEnables = 2,
     IP = 3,
     IPSrc = 4,
     MAC = 5,
     SubnetMask = 6,
     Gateway1 = 12,
     Gateway1MAC = 13,
     VLANId = 20,
     CiphersuiteSupport = 22,
     CiphersuiteEntries = 23,
     cipherSuitePrivilegeLevels = 24,
     IPFamilySupport = 50,
     IPFamilyEnables = 51,
     IPv6Status = 55,
     IPv6StaticAddresses = 56,
     IPv6DynamicAddresses = 59,
     IPv6RouterControl = 64,
     IPv6StaticRouter1IP = 65,
     IPv6StaticRouter1MAC = 66,
     IPv6StaticRouter1PrefixLength = 67,
     IPv6StaticRouter1PrefixValue = 68,
 };

 /** @brief IPMI IP Origin Types */
 enum class IPSrc : uint8_t
 {
     Unspecified = 0,
     Static = 1,
     DHCP = 2,
     BIOS = 3,
     BMC = 4,
 };

 /** @brief IPMI Set Status */
 enum class SetStatus : uint8_t
 {
     Complete = 0,
     InProgress = 1,
     Commit = 2,
 };

 /** @brief IPMI Family Suport Bits */
 namespace IPFamilySupportFlag
 {
 constexpr uint8_t IPv6Only = 0;
 constexpr uint8_t DualStack = 1;
 constexpr uint8_t IPv6Alerts = 2;
 } // namespace IPFamilySupportFlag

 /** @brief IPMI IPFamily Enables Flag */
 enum class IPFamilyEnables : uint8_t
 {
     IPv4Only = 0,
     IPv6Only = 1,
     DualStack = 2,
 };

 /** @brief IPMI IPv6 Dyanmic Status Bits */
 namespace IPv6StatusFlag
 {
 constexpr uint8_t DHCP = 0;
 constexpr uint8_t SLAAC = 1;
 }; // namespace IPv6StatusFlag

 /** @brief IPMI IPv6 Source */
 enum class IPv6Source : uint8_t
 {
     Static = 0,
     SLAAC = 1,
     DHCP = 2,
 };

 /** @brief IPMI IPv6 Address Status */
 enum class IPv6AddressStatus : uint8_t
 {
     Active = 0,
     Disabled = 1,
 };

 namespace IPv6RouterControlFlag
 {
 constexpr uint8_t Static = 0;
 constexpr uint8_t Dynamic = 1;
 }; // namespace IPv6RouterControlFlag

 // LAN Handler specific response codes
 constexpr Cc ccParamNotSupported = 0x80;
 constexpr Cc ccParamSetLocked = 0x81;
 constexpr Cc ccParamReadOnly = 0x82;

 // VLANs are a 12-bit value
 constexpr uint16_t VLAN_VALUE_MASK = 0x0fff;
 constexpr uint16_t VLAN_ENABLE_FLAG = 0x8000;

 // Arbitrary v6 Address Limits to prevent too much output in ipmitool
 constexpr uint8_t MAX_IPV6_STATIC_ADDRESSES = 15;
 constexpr uint8_t MAX_IPV6_DYNAMIC_ADDRESSES = 15;

 // Prefix length limits of phosphor-networkd
 constexpr uint8_t MIN_IPV4_PREFIX_LENGTH = 1;
 constexpr uint8_t MAX_IPV4_PREFIX_LENGTH = 32;
 constexpr uint8_t MIN_IPV6_PREFIX_LENGTH = 1;
 constexpr uint8_t MAX_IPV6_PREFIX_LENGTH = 128;

 /** @brief The dbus parameters for the interface corresponding to a channel
  *         This helps reduce the number of mapper lookups we need for each
  *         query and simplifies finding the VLAN interface if needed.
  */
 struct ChannelParams
 {
     /** @brief The channel ID */
     int id;
     /** @brief channel name for the interface */
     std::string ifname;
     /** @brief Name of the service on the bus */
     std::string service;
     /** @brief Lower level adapter path that is guaranteed to not be a VLAN */
     std::string ifPath;
     /** @brief Logical adapter path used for address assignment */
     std::string logicalPath;
 };

 /** @brief A trivial helper used to determine if two PODs are equal
  *
  *  @params[in] a - The first object to compare
  *  @params[in] b - The second object to compare
  *  @return True if the objects are the same bytewise
  */
 template <typename T>
 bool equal(const T& a, const T& b)
 {
     static_assert(std::is_trivially_copyable_v<T>);
     return std::memcmp(&a, &b, sizeof(T)) == 0;
 }

 /** @brief Copies bytes from an array into a trivially copyable container
  *
  *  @params[out] t     - The container receiving the data
  *  @params[in]  bytes - The data to copy
  */
 template <size_t N, typename T>
 void copyInto(T& t, const std::array<uint8_t, N>& bytes)
 {
     static_assert(std::is_trivially_copyable_v<T>);
     static_assert(N == sizeof(T));
     std::memcpy(&t, bytes.data(), bytes.size());
 }

 /** @brief Gets a generic view of the bytes in the input container
  *
  *  @params[in] t - The data to reference
  *  @return A string_view referencing the bytes in the container
  */
 template <typename T>
 std::string_view dataRef(const T& t)
 {
     static_assert(std::is_trivially_copyable_v<T>);
     return {reinterpret_cast<const char*>(&t), sizeof(T)};
 }

 /** @brief Determines the ethernet interface name corresponding to a channel
  *         Tries to map a VLAN object first so that the address information
  *         is accurate. Otherwise it gets the standard ethernet interface.
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] channel - The channel id corresponding to an ethernet interface
  *  @return Ethernet interface service and object path if it exists
  */
 std::optional<ChannelParams> maybeGetChannelParams(sdbusplus::bus::bus& bus,
                                                    uint8_t channel);

 /** @brief A trivial helper around maybeGetChannelParams() that throws an
  *         exception when it is unable to acquire parameters for the channel.
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] channel - The channel id corresponding to an ethernet interface
  *  @return Ethernet interface service and object path
  */
 ChannelParams getChannelParams(sdbusplus::bus::bus& bus, uint8_t channel);

 /** @brief Trivializes using parameter getter functions by providing a bus
  *         and channel parameters automatically.
  *
  *  @param[in] channel - The channel id corresponding to an ethernet interface
  *  ...
  */
 template <auto func, typename... Args>
 auto channelCall(uint8_t channel, Args&&... args)
 {
     sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection());
     auto params = getChannelParams(bus, channel);
     return std::invoke(func, bus, params, std::forward<Args>(args)...);
 }

 /** @brief Generic paramters for different address families */
 template <int family>
 struct AddrFamily
 {
 };

 /** @brief Parameter specialization for IPv4 */
 template <>
 struct AddrFamily<AF_INET>
 {
     using addr = in_addr;
     static constexpr auto protocol =
         sdbusplus::xyz::openbmc_project::Network::server::IP::Protocol::IPv4;
     static constexpr size_t maxStrLen = INET6_ADDRSTRLEN;
     static constexpr uint8_t defaultPrefix = 32;
     static constexpr char propertyGateway[] = "DefaultGateway";
 };

 /** @brief Parameter specialization for IPv6 */
 template <>
 struct AddrFamily<AF_INET6>
 {
     using addr = in6_addr;
     static constexpr auto protocol =
         sdbusplus::xyz::openbmc_project::Network::server::IP::Protocol::IPv6;
     static constexpr size_t maxStrLen = INET6_ADDRSTRLEN;
     static constexpr uint8_t defaultPrefix = 128;
     static constexpr char propertyGateway[] = "DefaultGateway6";
 };

 /** @brief Interface Neighbor configuration parameters */
 template <int family>
 struct IfNeigh
 {
     std::string path;
     typename AddrFamily<family>::addr ip;
     ether_addr mac;
 };

 /** @brief Interface IP Address configuration parameters */
 template <int family>
 struct IfAddr
 {
     std::string path;
     typename AddrFamily<family>::addr address;
     sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin origin;
     uint8_t prefix;
 };

 /** @brief Valid address origins for IPv6 */
 static inline const std::unordered_set<
     sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>
     originsV6Static = {sdbusplus::xyz::openbmc_project::Network::server::IP::
                            AddressOrigin::Static};
 static inline const std::unordered_set<
     sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>
     originsV6Dynamic = {
         sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin::
             DHCP,
         sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin::
             SLAAC,
 };

 /** @brief A lazy lookup mechanism for iterating over object properties stored
  *         in DBus. This will only perform the object lookup when needed, and
  *         retains a cache of previous lookups to speed up future iterations.
  */
 class ObjectLookupCache
 {
   public:
     using PropertiesCache = std::unordered_map<std::string, PropertyMap>;

     /** @brief Creates a new ObjectLookupCache for the interface on the bus
      *         NOTE: The inputs to this object must outlive the object since
      *         they are only referenced by it.
      *
      *  @param[in] bus    - The bus object used for lookups
      *  @param[in] params - The parameters for the channel
      *  @param[in] intf   - The interface we are looking up
      */
     ObjectLookupCache(sdbusplus::bus::bus& bus, const ChannelParams& params,
                       const char* intf) :
         bus(bus),
         params(params), intf(intf),
         objs(getAllDbusObjects(bus, params.logicalPath, intf, ""))
     {
     }

     class iterator : public ObjectTree::const_iterator
     {
       public:
         using value_type = PropertiesCache::value_type;

         iterator(ObjectTree::const_iterator it, ObjectLookupCache& container) :
             ObjectTree::const_iterator(it), container(container),
             ret(container.cache.end())
         {
         }
         value_type& operator*()
         {
             ret = container.get(ObjectTree::const_iterator::operator*().first);
             return *ret;
         }
         value_type* operator->()
         {
             return &operator*();
         }

       private:
         ObjectLookupCache& container;
         PropertiesCache::iterator ret;
     };

     iterator begin() noexcept
     {
         return iterator(objs.begin(), *this);
     }

     iterator end() noexcept
     {
         return iterator(objs.end(), *this);
     }

   private:
     sdbusplus::bus::bus& bus;
     const ChannelParams& params;
     const char* const intf;
     const ObjectTree objs;
     PropertiesCache cache;

     /** @brief Gets a cached copy of the object properties if possible
      *         Otherwise performs a query on DBus to look them up
      *
      *  @param[in] path - The object path to lookup
      *  @return An iterator for the specified object path + properties
      */
     PropertiesCache::iterator get(const std::string& path)
     {
         auto it = cache.find(path);
         if (it != cache.end())
         {
             return it;
         }
         auto properties = getAllDbusProperties(bus, params.service, path, intf);
         return cache.insert({path, std::move(properties)}).first;
     }
 };

 /** @brief Turns an IP address string into the network byte order form
  *         NOTE: This version strictly validates family matches
  *
  *  @param[in] address - The string form of the address
  *  @return A network byte order address or none if conversion failed
  */
 template <int family>
 std::optional<typename AddrFamily<family>::addr>
     maybeStringToAddr(const char* address)
 {
     typename AddrFamily<family>::addr ret;
     if (inet_pton(family, address, &ret) == 1)
     {
         return ret;
     }
     return std::nullopt;
 }

 /** @brief Turns an IP address string into the network byte order form
  *         NOTE: This version strictly validates family matches
  *
  *  @param[in] address - The string form of the address
  *  @return A network byte order address
  */
 template <int family>
 typename AddrFamily<family>::addr stringToAddr(const char* address)
 {
     auto ret = maybeStringToAddr<family>(address);
     if (!ret)
     {
         phosphor::logging::log<phosphor::logging::level::ERR>(
             "Failed to convert IP Address",
             phosphor::logging::entry("FAMILY=%d", family),
             phosphor::logging::entry("ADDRESS=%s", address));
         phosphor::logging::elog<
             sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure>();
     }
     return *ret;
 }

 /** @brief Turns an IP address in network byte order into a string
  *
  *  @param[in] address - The string form of the address
  *  @return A network byte order address
  */
 template <int family>
 std::string addrToString(const typename AddrFamily<family>::addr& address)
 {
     std::string ret(AddrFamily<family>::maxStrLen, '\0');
     inet_ntop(family, &address, ret.data(), ret.size());
     ret.resize(strlen(ret.c_str()));
     return ret;
 }

 /** @brief Converts a human readable MAC string into MAC bytes
  *
  *  @param[in] mac - The MAC string
  *  @return MAC in bytes
  */
 ether_addr stringToMAC(const char* mac);
 /** @brief Searches the ip object lookup cache for an address matching
  *         the input parameters. NOTE: The index lacks stability across address
  *         changes since the network daemon has no notion of stable indicies.
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] params  - The parameters for the channel
  *  @param[in] idx     - The index of the desired address on the interface
  *  @param[in] origins - The allowed origins for the address objects
  *  @param[in] ips     - The object lookup cache holding all of the address info
  *  @return The address and prefix if it was found
  */
 template <int family>
 std::optional<IfAddr<family>> findIfAddr(
     sdbusplus::bus::bus& bus, const ChannelParams& params, uint8_t idx,
     const std::unordered_set<
         sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>&
         origins,
     ObjectLookupCache& ips)
 {
     for (const auto& [path, properties] : ips)
     {
         const auto& addrStr = std::get<std::string>(properties.at("Address"));
         auto addr = maybeStringToAddr<family>(addrStr.c_str());
         if (!addr)
         {
             continue;
         }

         sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin
             origin = sdbusplus::xyz::openbmc_project::Network::server::IP::
                 convertAddressOriginFromString(
                     std::get<std::string>(properties.at("Origin")));
         if (origins.find(origin) == origins.end())
         {
             continue;
         }

         if (idx > 0)
         {
             idx--;
             continue;
         }

         IfAddr<family> ifaddr;
         ifaddr.path = path;
         ifaddr.address = *addr;
         ifaddr.prefix = std::get<uint8_t>(properties.at("PrefixLength"));
         ifaddr.origin = origin;
         return std::move(ifaddr);
     }

     return std::nullopt;
 }
 /** @brief Trivial helper around findIfAddr that simplifies calls
  *         for one off lookups. Don't use this if you intend to do multiple
  *         lookups at a time.
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] params  - The parameters for the channel
  *  @param[in] idx     - The index of the desired address on the interface
  *  @param[in] origins - The allowed origins for the address objects
  *  @return The address and prefix if it was found
  */
 template <int family>
 auto getIfAddr(
     sdbusplus::bus::bus& bus, const ChannelParams& params, uint8_t idx,
     const std::unordered_set<
         sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>&
         origins)
 {
     ObjectLookupCache ips(bus, params, INTF_IP);
     return findIfAddr<family>(bus, params, idx, origins, ips);
 }

 /** @brief Determines if the ethernet interface is using DHCP
  *
  *  @param[in] bus    - The bus object used for lookups
  *  @param[in] params - The parameters for the channel
  *  @return DHCPConf enumeration
  */
 sdbusplus::xyz::openbmc_project::Network::server::EthernetInterface::DHCPConf
     getDHCPProperty(sdbusplus::bus::bus& bus, const ChannelParams& params);

 /** @brief Sets the DHCP v6 state on the given interface
  *
  *  @param[in] bus           - The bus object used for lookups
  *  @param[in] params        - The parameters for the channel
  *  @param[in] requestedDhcp - DHCP state to assign (none, v6, both)
  *  @param[in] defaultMode   - True: Use algorithmic assignment
  *                             False: requestedDhcp assigned unconditionally
  */
 void setDHCPv6Property(sdbusplus::bus::bus& bus, const ChannelParams& params,
                        const sdbusplus::xyz::openbmc_project::Network::server::
                            EthernetInterface::DHCPConf requestedDhcp,
                        const bool defaultMode);

 /** @brief Reconfigures the IPv6 address info configured for the interface
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] params  - The parameters for the channel
  *  @param[in] idx     - The address index to operate on
  *  @param[in] address - The new address
  *  @param[in] prefix  - The new address prefix
  */
 void reconfigureIfAddr6(sdbusplus::bus::bus& bus, const ChannelParams& params,
                         uint8_t idx, const in6_addr& address, uint8_t prefix);

 /** @brief Retrieves the current gateway for the address family on the system
  *         NOTE: The gateway is per channel instead of the system wide one.
  *
  *  @param[in] bus    - The bus object used for lookups
  *  @param[in] params - The parameters for the channel
  *  @return An address representing the gateway address if it exists
  */
 template <int family>
 std::optional<typename AddrFamily<family>::addr>
     getGatewayProperty(sdbusplus::bus::bus& bus, const ChannelParams& params)
 {
     auto objPath = "/xyz/openbmc_project/network/" + params.ifname;
     auto gatewayStr = std::get<std::string>(
         getDbusProperty(bus, params.service, objPath, INTF_ETHERNET,
                         AddrFamily<family>::propertyGateway));
     if (gatewayStr.empty())
     {
         return std::nullopt;
     }
     return stringToAddr<family>(gatewayStr.c_str());
 }

 template <int family>
 std::optional<IfNeigh<family>>
     findStaticNeighbor(sdbusplus::bus::bus& bus, const ChannelParams& params,
                        const typename AddrFamily<family>::addr& ip,
                        ObjectLookupCache& neighbors)
 {
     using sdbusplus::xyz::openbmc_project::Network::server::Neighbor;
     const auto state =
         sdbusplus::xyz::openbmc_project::Network::server::convertForMessage(
             Neighbor::State::Permanent);
     for (const auto& [path, neighbor] : neighbors)
     {
         const auto& ipStr = std::get<std::string>(neighbor.at("IPAddress"));
         auto neighIP = maybeStringToAddr<family>(ipStr.c_str());
         if (!neighIP)
         {
             continue;
         }
         if (!equal(*neighIP, ip))
         {
             continue;
         }
         if (state != std::get<std::string>(neighbor.at("State")))
         {
             continue;
         }

         IfNeigh<family> ret;
         ret.path = path;
         ret.ip = ip;
         const auto& macStr = std::get<std::string>(neighbor.at("MACAddress"));
         ret.mac = stringToMAC(macStr.c_str());
         return std::move(ret);
     }

     return std::nullopt;
 }

 template <int family>
 void createNeighbor(sdbusplus::bus::bus& bus, const ChannelParams& params,
                     const typename AddrFamily<family>::addr& address,
                     const ether_addr& mac)
 {
     auto newreq =
         bus.new_method_call(params.service.c_str(), params.logicalPath.c_str(),
                             INTF_NEIGHBOR_CREATE_STATIC, "Neighbor");
     std::string macStr = ether_ntoa(&mac);
     newreq.append(addrToString<family>(address), macStr);
     bus.call_noreply(newreq);
 }

 /** @brief Deletes the dbus object. Ignores empty objects or objects that are
  *         missing from the bus.
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] service - The name of the service
  *  @param[in] path    - The path of the object to delete
  */
 void deleteObjectIfExists(sdbusplus::bus::bus& bus, const std::string& service,
                           const std::string& path);

 /** @brief Sets the value for the default gateway of the channel
  *
  *  @param[in] bus     - The bus object used for lookups
  *  @param[in] params  - The parameters for the channel
  *  @param[in] gateway - Gateway address to apply
  */
 template <int family>
 void setGatewayProperty(sdbusplus::bus::bus& bus, const ChannelParams& params,
                         const typename AddrFamily<family>::addr& address)
 {
     // Save the old gateway MAC address if it exists so we can recreate it
     auto gateway = getGatewayProperty<family>(bus, params);
     std::optional<IfNeigh<family>> neighbor;
     if (gateway)
     {
         ObjectLookupCache neighbors(bus, params, INTF_NEIGHBOR);
         neighbor = findStaticNeighbor<family>(bus, params, *gateway, neighbors);
     }

     auto objPath = "/xyz/openbmc_project/network/" + params.ifname;
     setDbusProperty(bus, params.service, objPath, INTF_ETHERNET,
                     AddrFamily<family>::propertyGateway,
                     addrToString<family>(address));

     // Restore the gateway MAC if we had one
     if (neighbor)
     {
         deleteObjectIfExists(bus, params.service, neighbor->path);
         createNeighbor<family>(bus, params, address, neighbor->mac);
     }
 }

 /** @enum SolConfParam
  *
  *  using for Set/Get SOL configuration parameters command.
  */
 enum class SolConfParam : uint8_t
 {
     Progress,       //!< Set In Progress.
     Enable,         //!< SOL Enable.
     Authentication, //!< SOL Authentication.
     Accumulate,     //!< Character Accumulate Interval & Send Threshold.
     Retry,          //!< SOL Retry.
     NonVbitrate,    //!< SOL non-volatile bit rate.
     Vbitrate,       //!< SOL volatile bit rate.
     Channel,        //!< SOL payload channel.
     Port,           //!< SOL payload port.
 };

 constexpr uint8_t ipmiCCParamNotSupported = 0x80;
 constexpr uint8_t ipmiCCWriteReadParameter = 0x82;

 } // namespace transport
 } // namespace ipmi
	#pragma once

	#include "app/channel.hpp"
	#include "user_channel/cipher_mgmt.hpp"

	#include <arpa/inet.h>
	#include <netinet/ether.h>

	#include <array>
	#include <bitset>
	#include <cinttypes>
	#include <cstdint>
	#include <cstring>
	#include <fstream>
	#include <functional>
	#include <ipmid/api-types.hpp>
	#include <ipmid/api.hpp>
	#include <ipmid/message.hpp>
	#include <ipmid/message/types.hpp>
	#include <ipmid/types.hpp>
	#include <ipmid/utils.hpp>
	#include <optional>
	#include <phosphor-logging/elog-errors.hpp>
	#include <phosphor-logging/elog.hpp>
	#include <phosphor-logging/log.hpp>
	#include <sdbusplus/bus.hpp>
	#include <sdbusplus/exception.hpp>
	#include <string>
	#include <string_view>
	#include <type_traits>
	#include <unordered_map>
	#include <unordered_set>
	#include <user_channel/channel_layer.hpp>
	#include <utility>
	#include <vector>
	#include <xyz/openbmc_project/Common/error.hpp>
	#include <xyz/openbmc_project/Network/EthernetInterface/server.hpp>
	#include <xyz/openbmc_project/Network/IP/server.hpp>
	#include <xyz/openbmc_project/Network/Neighbor/server.hpp>

	namespace ipmi
	{
	namespace transport
	{

	// D-Bus Network Daemon definitions
	constexpr auto PATH_ROOT = "/xyz/openbmc_project/network";
	constexpr auto INTF_ETHERNET = "xyz.openbmc_project.Network.EthernetInterface";
	constexpr auto INTF_IP = "xyz.openbmc_project.Network.IP";
	constexpr auto INTF_IP_CREATE = "xyz.openbmc_project.Network.IP.Create";
	constexpr auto INTF_MAC = "xyz.openbmc_project.Network.MACAddress";
	constexpr auto INTF_NEIGHBOR = "xyz.openbmc_project.Network.Neighbor";
	constexpr auto INTF_NEIGHBOR_CREATE_STATIC =
	"xyz.openbmc_project.Network.Neighbor.CreateStatic";
	constexpr auto INTF_VLAN = "xyz.openbmc_project.Network.VLAN";
	constexpr auto INTF_VLAN_CREATE = "xyz.openbmc_project.Network.VLAN.Create";

	/** @brief IPMI LAN Parameters */
	enum class LanParam : uint8_t
	{
	SetStatus = 0,
	AuthSupport = 1,
	AuthEnables = 2,
	IP = 3,
	IPSrc = 4,
	MAC = 5,
	SubnetMask = 6,
	Gateway1 = 12,
	Gateway1MAC = 13,
	VLANId = 20,
	CiphersuiteSupport = 22,
	CiphersuiteEntries = 23,
	cipherSuitePrivilegeLevels = 24,
	IPFamilySupport = 50,
	IPFamilyEnables = 51,
	IPv6Status = 55,
	IPv6StaticAddresses = 56,
	IPv6DynamicAddresses = 59,
	IPv6RouterControl = 64,
	IPv6StaticRouter1IP = 65,
	IPv6StaticRouter1MAC = 66,
	IPv6StaticRouter1PrefixLength = 67,
	IPv6StaticRouter1PrefixValue = 68,
	};

	/** @brief IPMI IP Origin Types */
	enum class IPSrc : uint8_t
	{
	Unspecified = 0,
	Static = 1,
	DHCP = 2,
	BIOS = 3,
	BMC = 4,
	};

	/** @brief IPMI Set Status */
	enum class SetStatus : uint8_t
	{
	Complete = 0,
	InProgress = 1,
	Commit = 2,
	};

	/** @brief IPMI Family Suport Bits */
	namespace IPFamilySupportFlag
	{
	constexpr uint8_t IPv6Only = 0;
	constexpr uint8_t DualStack = 1;
	constexpr uint8_t IPv6Alerts = 2;
	} // namespace IPFamilySupportFlag

	/** @brief IPMI IPFamily Enables Flag */
	enum class IPFamilyEnables : uint8_t
	{
	IPv4Only = 0,
	IPv6Only = 1,
	DualStack = 2,
	};

	/** @brief IPMI IPv6 Dyanmic Status Bits */
	namespace IPv6StatusFlag
	{
	constexpr uint8_t DHCP = 0;
	constexpr uint8_t SLAAC = 1;
	}; // namespace IPv6StatusFlag

	/** @brief IPMI IPv6 Source */
	enum class IPv6Source : uint8_t
	{
	Static = 0,
	SLAAC = 1,
	DHCP = 2,
	};

	/** @brief IPMI IPv6 Address Status */
	enum class IPv6AddressStatus : uint8_t
	{
	Active = 0,
	Disabled = 1,
	};

	namespace IPv6RouterControlFlag
	{
	constexpr uint8_t Static = 0;
	constexpr uint8_t Dynamic = 1;
	}; // namespace IPv6RouterControlFlag

	// LAN Handler specific response codes
	constexpr Cc ccParamNotSupported = 0x80;
	constexpr Cc ccParamSetLocked = 0x81;
	constexpr Cc ccParamReadOnly = 0x82;

	// VLANs are a 12-bit value
	constexpr uint16_t VLAN_VALUE_MASK = 0x0fff;
	constexpr uint16_t VLAN_ENABLE_FLAG = 0x8000;

	// Arbitrary v6 Address Limits to prevent too much output in ipmitool
	constexpr uint8_t MAX_IPV6_STATIC_ADDRESSES = 15;
	constexpr uint8_t MAX_IPV6_DYNAMIC_ADDRESSES = 15;

	// Prefix length limits of phosphor-networkd
	constexpr uint8_t MIN_IPV4_PREFIX_LENGTH = 1;
	constexpr uint8_t MAX_IPV4_PREFIX_LENGTH = 32;
	constexpr uint8_t MIN_IPV6_PREFIX_LENGTH = 1;
	constexpr uint8_t MAX_IPV6_PREFIX_LENGTH = 128;

	/** @brief The dbus parameters for the interface corresponding to a channel
	* This helps reduce the number of mapper lookups we need for each
	* query and simplifies finding the VLAN interface if needed.
	*/
	struct ChannelParams
	{
	/** @brief The channel ID */
	int id;
	/** @brief channel name for the interface */
	std::string ifname;
	/** @brief Name of the service on the bus */
	std::string service;
	/** @brief Lower level adapter path that is guaranteed to not be a VLAN */
	std::string ifPath;
	/** @brief Logical adapter path used for address assignment */
	std::string logicalPath;
	};

	/** @brief A trivial helper used to determine if two PODs are equal
	*
	* @params[in] a - The first object to compare
	* @params[in] b - The second object to compare
	* @return True if the objects are the same bytewise
	*/
	template <typename T>
	bool equal(const T& a, const T& b)
	{
	static_assert(std::is_trivially_copyable_v<T>);
	return std::memcmp(&a, &b, sizeof(T)) == 0;
	}

	/** @brief Copies bytes from an array into a trivially copyable container
	*
	* @params[out] t - The container receiving the data
	* @params[in] bytes - The data to copy
	*/
	template <size_t N, typename T>
	void copyInto(T& t, const std::array<uint8_t, N>& bytes)
	{
	static_assert(std::is_trivially_copyable_v<T>);
	static_assert(N == sizeof(T));
	std::memcpy(&t, bytes.data(), bytes.size());
	}

	/** @brief Gets a generic view of the bytes in the input container
	*
	* @params[in] t - The data to reference
	* @return A string_view referencing the bytes in the container
	*/
	template <typename T>
	std::string_view dataRef(const T& t)
	{
	static_assert(std::is_trivially_copyable_v<T>);
	return {reinterpret_cast<const char*>(&t), sizeof(T)};
	}

	/** @brief Determines the ethernet interface name corresponding to a channel
	* Tries to map a VLAN object first so that the address information
	* is accurate. Otherwise it gets the standard ethernet interface.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] channel - The channel id corresponding to an ethernet interface
	* @return Ethernet interface service and object path if it exists
	*/
	std::optional<ChannelParams> maybeGetChannelParams(sdbusplus::bus::bus& bus,
	uint8_t channel);

	/** @brief A trivial helper around maybeGetChannelParams() that throws an
	* exception when it is unable to acquire parameters for the channel.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] channel - The channel id corresponding to an ethernet interface
	* @return Ethernet interface service and object path
	*/
	ChannelParams getChannelParams(sdbusplus::bus::bus& bus, uint8_t channel);

	/** @brief Trivializes using parameter getter functions by providing a bus
	* and channel parameters automatically.
	*
	* @param[in] channel - The channel id corresponding to an ethernet interface
	* ...
	*/
	template <auto func, typename... Args>
	auto channelCall(uint8_t channel, Args&&... args)
	{
	sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection());
	auto params = getChannelParams(bus, channel);
	return std::invoke(func, bus, params, std::forward<Args>(args)...);
	}

	/** @brief Generic paramters for different address families */
	template <int family>
	struct AddrFamily
	{
	};

	/** @brief Parameter specialization for IPv4 */
	template <>
	struct AddrFamily<AF_INET>
	{
	using addr = in_addr;
	static constexpr auto protocol =
	sdbusplus::xyz::openbmc_project::Network::server::IP::Protocol::IPv4;
	static constexpr size_t maxStrLen = INET6_ADDRSTRLEN;
	static constexpr uint8_t defaultPrefix = 32;
	static constexpr char propertyGateway[] = "DefaultGateway";
	};

	/** @brief Parameter specialization for IPv6 */
	template <>
	struct AddrFamily<AF_INET6>
	{
	using addr = in6_addr;
	static constexpr auto protocol =
	sdbusplus::xyz::openbmc_project::Network::server::IP::Protocol::IPv6;
	static constexpr size_t maxStrLen = INET6_ADDRSTRLEN;
	static constexpr uint8_t defaultPrefix = 128;
	static constexpr char propertyGateway[] = "DefaultGateway6";
	};

	/** @brief Interface Neighbor configuration parameters */
	template <int family>
	struct IfNeigh
	{
	std::string path;
	typename AddrFamily<family>::addr ip;
	ether_addr mac;
	};

	/** @brief Interface IP Address configuration parameters */
	template <int family>
	struct IfAddr
	{
	std::string path;
	typename AddrFamily<family>::addr address;
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin origin;
	uint8_t prefix;
	};

	/** @brief Valid address origins for IPv6 */
	static inline const std::unordered_set<
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>
	originsV6Static = {sdbusplus::xyz::openbmc_project::Network::server::IP::
	AddressOrigin::Static};
	static inline const std::unordered_set<
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>
	originsV6Dynamic = {
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin::
	DHCP,
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin::
	SLAAC,
	};

	/** @brief A lazy lookup mechanism for iterating over object properties stored
	* in DBus. This will only perform the object lookup when needed, and
	* retains a cache of previous lookups to speed up future iterations.
	*/
	class ObjectLookupCache
	{
	public:
	using PropertiesCache = std::unordered_map<std::string, PropertyMap>;

	/** @brief Creates a new ObjectLookupCache for the interface on the bus
	* NOTE: The inputs to this object must outlive the object since
	* they are only referenced by it.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] intf - The interface we are looking up
	*/
	ObjectLookupCache(sdbusplus::bus::bus& bus, const ChannelParams& params,
	const char* intf) :
	bus(bus),
	params(params), intf(intf),
	objs(getAllDbusObjects(bus, params.logicalPath, intf, ""))
	{
	}

	class iterator : public ObjectTree::const_iterator
	{
	public:
	using value_type = PropertiesCache::value_type;

	iterator(ObjectTree::const_iterator it, ObjectLookupCache& container) :
	ObjectTree::const_iterator(it), container(container),
	ret(container.cache.end())
	{
	}
	value_type& operator*()
	{
	ret = container.get(ObjectTree::const_iterator::operator*().first);
	return *ret;
	}
	value_type* operator->()
	{
	return &operator*();
	}

	private:
	ObjectLookupCache& container;
	PropertiesCache::iterator ret;
	};

	iterator begin() noexcept
	{
	return iterator(objs.begin(), *this);
	}

	iterator end() noexcept
	{
	return iterator(objs.end(), *this);
	}

	private:
	sdbusplus::bus::bus& bus;
	const ChannelParams& params;
	const char* const intf;
	const ObjectTree objs;
	PropertiesCache cache;

	/** @brief Gets a cached copy of the object properties if possible
	* Otherwise performs a query on DBus to look them up
	*
	* @param[in] path - The object path to lookup
	* @return An iterator for the specified object path + properties
	*/
	PropertiesCache::iterator get(const std::string& path)
	{
	auto it = cache.find(path);
	if (it != cache.end())
	{
	return it;
	}
	auto properties = getAllDbusProperties(bus, params.service, path, intf);
	return cache.insert({path, std::move(properties)}).first;
	}
	};

	/** @brief Turns an IP address string into the network byte order form
	* NOTE: This version strictly validates family matches
	*
	* @param[in] address - The string form of the address
	* @return A network byte order address or none if conversion failed
	*/
	template <int family>
	std::optional<typename AddrFamily<family>::addr>
	maybeStringToAddr(const char* address)
	{
	typename AddrFamily<family>::addr ret;
	if (inet_pton(family, address, &ret) == 1)
	{
	return ret;
	}
	return std::nullopt;
	}

	/** @brief Turns an IP address string into the network byte order form
	* NOTE: This version strictly validates family matches
	*
	* @param[in] address - The string form of the address
	* @return A network byte order address
	*/
	template <int family>
	typename AddrFamily<family>::addr stringToAddr(const char* address)
	{
	auto ret = maybeStringToAddr<family>(address);
	if (!ret)
	{
	phosphor::logging::log<phosphor::logging::level::ERR>(
	"Failed to convert IP Address",
	phosphor::logging::entry("FAMILY=%d", family),
	phosphor::logging::entry("ADDRESS=%s", address));
	phosphor::logging::elog<
	sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure>();
	}
	return *ret;
	}

	/** @brief Turns an IP address in network byte order into a string
	*
	* @param[in] address - The string form of the address
	* @return A network byte order address
	*/
	template <int family>
	std::string addrToString(const typename AddrFamily<family>::addr& address)
	{
	std::string ret(AddrFamily<family>::maxStrLen, '\0');
	inet_ntop(family, &address, ret.data(), ret.size());
	ret.resize(strlen(ret.c_str()));
	return ret;
	}

	/** @brief Converts a human readable MAC string into MAC bytes
	*
	* @param[in] mac - The MAC string
	* @return MAC in bytes
	*/
	ether_addr stringToMAC(const char* mac);
	/** @brief Searches the ip object lookup cache for an address matching
	* the input parameters. NOTE: The index lacks stability across address
	* changes since the network daemon has no notion of stable indicies.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] idx - The index of the desired address on the interface
	* @param[in] origins - The allowed origins for the address objects
	* @param[in] ips - The object lookup cache holding all of the address info
	* @return The address and prefix if it was found
	*/
	template <int family>
	std::optional<IfAddr<family>> findIfAddr(
	sdbusplus::bus::bus& bus, const ChannelParams& params, uint8_t idx,
	const std::unordered_set<
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>&
	origins,
	ObjectLookupCache& ips)
	{
	for (const auto& [path, properties] : ips)
	{
	const auto& addrStr = std::get<std::string>(properties.at("Address"));
	auto addr = maybeStringToAddr<family>(addrStr.c_str());
	if (!addr)
	{
	continue;
	}

	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin
	origin = sdbusplus::xyz::openbmc_project::Network::server::IP::
	convertAddressOriginFromString(
	std::get<std::string>(properties.at("Origin")));
	if (origins.find(origin) == origins.end())
	{
	continue;
	}

	if (idx > 0)
	{
	idx--;
	continue;
	}

	IfAddr<family> ifaddr;
	ifaddr.path = path;
	ifaddr.address = *addr;
	ifaddr.prefix = std::get<uint8_t>(properties.at("PrefixLength"));
	ifaddr.origin = origin;
	return std::move(ifaddr);
	}

	return std::nullopt;
	}
	/** @brief Trivial helper around findIfAddr that simplifies calls
	* for one off lookups. Don't use this if you intend to do multiple
	* lookups at a time.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] idx - The index of the desired address on the interface
	* @param[in] origins - The allowed origins for the address objects
	* @return The address and prefix if it was found
	*/
	template <int family>
	auto getIfAddr(
	sdbusplus::bus::bus& bus, const ChannelParams& params, uint8_t idx,
	const std::unordered_set<
	sdbusplus::xyz::openbmc_project::Network::server::IP::AddressOrigin>&
	origins)
	{
	ObjectLookupCache ips(bus, params, INTF_IP);
	return findIfAddr<family>(bus, params, idx, origins, ips);
	}

	/** @brief Determines if the ethernet interface is using DHCP
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @return DHCPConf enumeration
	*/
	sdbusplus::xyz::openbmc_project::Network::server::EthernetInterface::DHCPConf
	getDHCPProperty(sdbusplus::bus::bus& bus, const ChannelParams& params);

	/** @brief Sets the DHCP v6 state on the given interface
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] requestedDhcp - DHCP state to assign (none, v6, both)
	* @param[in] defaultMode - True: Use algorithmic assignment
	* False: requestedDhcp assigned unconditionally
	*/
	void setDHCPv6Property(sdbusplus::bus::bus& bus, const ChannelParams& params,
	const sdbusplus::xyz::openbmc_project::Network::server::
	EthernetInterface::DHCPConf requestedDhcp,
	const bool defaultMode);

	/** @brief Reconfigures the IPv6 address info configured for the interface
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] idx - The address index to operate on
	* @param[in] address - The new address
	* @param[in] prefix - The new address prefix
	*/
	void reconfigureIfAddr6(sdbusplus::bus::bus& bus, const ChannelParams& params,
	uint8_t idx, const in6_addr& address, uint8_t prefix);

	/** @brief Retrieves the current gateway for the address family on the system
	* NOTE: The gateway is per channel instead of the system wide one.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @return An address representing the gateway address if it exists
	*/
	template <int family>
	std::optional<typename AddrFamily<family>::addr>
	getGatewayProperty(sdbusplus::bus::bus& bus, const ChannelParams& params)
	{
	auto objPath = "/xyz/openbmc_project/network/" + params.ifname;
	auto gatewayStr = std::get<std::string>(
	getDbusProperty(bus, params.service, objPath, INTF_ETHERNET,
	AddrFamily<family>::propertyGateway));
	if (gatewayStr.empty())
	{
	return std::nullopt;
	}
	return stringToAddr<family>(gatewayStr.c_str());
	}

	template <int family>
	std::optional<IfNeigh<family>>
	findStaticNeighbor(sdbusplus::bus::bus& bus, const ChannelParams& params,
	const typename AddrFamily<family>::addr& ip,
	ObjectLookupCache& neighbors)
	{
	using sdbusplus::xyz::openbmc_project::Network::server::Neighbor;
	const auto state =
	sdbusplus::xyz::openbmc_project::Network::server::convertForMessage(
	Neighbor::State::Permanent);
	for (const auto& [path, neighbor] : neighbors)
	{
	const auto& ipStr = std::get<std::string>(neighbor.at("IPAddress"));
	auto neighIP = maybeStringToAddr<family>(ipStr.c_str());
	if (!neighIP)
	{
	continue;
	}
	if (!equal(*neighIP, ip))
	{
	continue;
	}
	if (state != std::get<std::string>(neighbor.at("State")))
	{
	continue;
	}

	IfNeigh<family> ret;
	ret.path = path;
	ret.ip = ip;
	const auto& macStr = std::get<std::string>(neighbor.at("MACAddress"));
	ret.mac = stringToMAC(macStr.c_str());
	return std::move(ret);
	}

	return std::nullopt;
	}

	template <int family>
	void createNeighbor(sdbusplus::bus::bus& bus, const ChannelParams& params,
	const typename AddrFamily<family>::addr& address,
	const ether_addr& mac)
	{
	auto newreq =
	bus.new_method_call(params.service.c_str(), params.logicalPath.c_str(),
	INTF_NEIGHBOR_CREATE_STATIC, "Neighbor");
	std::string macStr = ether_ntoa(&mac);
	newreq.append(addrToString<family>(address), macStr);
	bus.call_noreply(newreq);
	}

	/** @brief Deletes the dbus object. Ignores empty objects or objects that are
	* missing from the bus.
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] service - The name of the service
	* @param[in] path - The path of the object to delete
	*/
	void deleteObjectIfExists(sdbusplus::bus::bus& bus, const std::string& service,
	const std::string& path);

	/** @brief Sets the value for the default gateway of the channel
	*
	* @param[in] bus - The bus object used for lookups
	* @param[in] params - The parameters for the channel
	* @param[in] gateway - Gateway address to apply
	*/
	template <int family>
	void setGatewayProperty(sdbusplus::bus::bus& bus, const ChannelParams& params,
	const typename AddrFamily<family>::addr& address)
	{
	// Save the old gateway MAC address if it exists so we can recreate it
	auto gateway = getGatewayProperty<family>(bus, params);
	std::optional<IfNeigh<family>> neighbor;
	if (gateway)
	{
	ObjectLookupCache neighbors(bus, params, INTF_NEIGHBOR);
	neighbor = findStaticNeighbor<family>(bus, params, *gateway, neighbors);
	}

	auto objPath = "/xyz/openbmc_project/network/" + params.ifname;
	setDbusProperty(bus, params.service, objPath, INTF_ETHERNET,
	AddrFamily<family>::propertyGateway,
	addrToString<family>(address));

	// Restore the gateway MAC if we had one
	if (neighbor)
	{
	deleteObjectIfExists(bus, params.service, neighbor->path);
	createNeighbor<family>(bus, params, address, neighbor->mac);
	}
	}

	/** @enum SolConfParam
	*
	* using for Set/Get SOL configuration parameters command.
	*/
	enum class SolConfParam : uint8_t
	{
	Progress, //!< Set In Progress.
	Enable, //!< SOL Enable.
	Authentication, //!< SOL Authentication.
	Accumulate, //!< Character Accumulate Interval & Send Threshold.
	Retry, //!< SOL Retry.
	NonVbitrate, //!< SOL non-volatile bit rate.
	Vbitrate, //!< SOL volatile bit rate.
	Channel, //!< SOL payload channel.
	Port, //!< SOL payload port.
	};

	constexpr uint8_t ipmiCCParamNotSupported = 0x80;
	constexpr uint8_t ipmiCCWriteReadParameter = 0x82;

	} // namespace transport
	} // namespace ipmi