| |
| option('tests', type: 'feature', description: 'Build tests') |
| option('boot-flag-safe-mode-support', type: 'feature', description: 'Add option to enable/disable safe mode in boot flags') |
| option('i2c-whitelist-check', type: 'feature', description: 'Add option to enable/disable i2c master write read command white list checking') |
| |
| # SoftPowerOff |
| option('softoff', type: 'feature', description: 'Builds soft power off') |
| option('softoff-busname', type: 'string', value: 'xyz.openbmc_project.Ipmi.Internal.SoftPowerOff', description: 'The Dbus busname to own for SoftPowerOff') |
| option('softoff-objpath', type: 'string', value: '/xyz/openbmc_project/ipmi/internal/soft_power_off', description: 'The SoftPowerOff Dbus root') |
| option('ipmi-sms-atn-ack-timeout-secs', type: 'integer', value: 3, description: 'Timeout for host to ack and query SMS_ATN from BMC') |
| option('ipmi-host-shutdown-complete-timeout-secs', type: 'integer', value: 2700, description: 'Wait time for host to shutdown') |
| # Indicates an in-band power off or reboot request from the host |
| # This file is used to ensure the soft off service does not run for host |
| # initiated shutdown or reboot requests |
| option('host-inband-request-dir', type: 'string', value: '/run/openbmc/', description: 'Directory to store host initiated shutdown file') |
| option('host-inband-request-file', type: 'string', value: 'host@%u-request', description: 'File to create if host has initiated shutdown or reboot') |
| |
| |
| # Config Variables |
| option('board-sensor', type: 'string', value: '/xyz/openbmc_project/inventory/system/chassis/motherboard', description: 'The inventory path to the motherboard fault sensor') |
| option('system-sensor', type: 'string', value: '/xyz/openbmc_project/inventory/system', description: 'The inventory path to the system event sensor') |
| |
| # Control Host Interfaces |
| option('control-host-busname', type: 'string', value: 'xyz.openbmc_project.Control.Host', description: 'The Control Host Dbus busname to own') |
| option('control-host-obj-mgr', type: 'string', value: '/xyz/openbmc_project/control', description: 'The Control Host D-Bus Object Manager') |
| option('host-name', type: 'string', value: 'host', description: 'The Control Host D-Bus Object Manager') |
| |
| # Power reading sensor configuration file |
| option('power-reading-sensor', type: 'string', value: '/usr/share/ipmi-providers/power_reading.json', description: 'Power reading sensor configuration file') |
| option('host-ipmi-lib-path', type: 'string', value: '/usr/lib/ipmid-providers/', description: 'The file path to search for libraries') |
| |
| # When a sensor read fails, hwmon will update the OperationalState interface's Functional property. |
| # This will mark the sensor as not functional and we will skip reading from that sensor. |
| option('update-functional-on-fail', type: 'feature', value: 'disabled', description: 'Check functional property to skip reading from faulty sensors') |
| |
| # Features |
| |
| # When libuserlayer is disabled, libuserlayer won't be included in the build. |
| option('libuserlayer', type: 'feature', description: 'Option to exclue exclude libuserlayer') |
| |
| # When transport-oem is enabled, the transporthandler_oem.cpp contents |
| # are compiled and added to the project. The transporthandler_oem.cpp file is |
| # copied from your own customization layer in the |
| # phosphor-ipmi-host_%.bbappend file. It is not necessary to create this file |
| # unless OEM Parameter extensions are required. |
| option('transport-oem', type: 'feature', value: 'disabled', description: 'Enable transporthandler_oem contents') |
| |
| # IPMI whitelist mechanism is not needed by everyone; offer a way to disable it |
| option('ipmi-whitelist', type: 'feature', description: 'Enable/disable IPMI whitelist filtering') |
| option('whitelist-conf', type: 'string', value: 'host-ipmid-whitelist.conf', description: 'Paths to IPMI whitelisted commands conf files') |
| |
| # Entity Manager Decorators |
| option('entity-manager-decorators', type: 'feature', value: 'enabled', description: 'The Entity Manager Decorators flag is enabled by default; offer a way to disable it') |
| |
| # Dynamic Sensor Stack |
| option('dynamic-sensors', type: 'feature', value: 'disabled', description: 'Dynamic sensors stack is enabled by default; offer a way to disable it') |
| option('dynamic-sensors-write', type: 'feature', value: 'disabled', description: 'Dynamic sensors stack is enabled by default; offer a way to disable it') |
| option('hybrid-sensors', type: 'feature', value: 'disabled', description: 'Hybrid sensors stack is disabled by default; offer a way to enable it') |
| |
| # Sensor Cache |
| option('sensors-cache', type: 'feature', value: 'disabled', description: 'Sensor cache stack is disabled by default; offer a way to enable it') |
| |
| # SEL Logger |
| option('sel-logger-clears-sel', type: 'feature', value: 'disabled', description: 'Clearing SEL through sel-logger is disabled by default; offer a way to enable it') |
| |
| # Generate configuration from Yaml |
| option('sensor-yaml-gen', type: 'string', value: 'sensor-example.yaml') |
| option('invsensor-yaml-gen', type: 'string', value: 'inventory-sensor-example.yaml') |
| option('fru-yaml-gen', type: 'string', value: 'fru-read-example.yaml') |
| |
| # Software Version |
| option('get-dbus-active-software', type: 'feature', description: 'Use the getActiveSoftwareVersionInfo for the BMC version and dev_id.json as backup') |
| option('fw-ver-regex', type : 'string', value : '(\\\\d+)\\\\.(\\\\d+)', description : 'Regular expressions for parsing firmware revision') |
| option('matches-map', type : 'array', value : ['1', '2', '0', '0', '0', '0'], description : 'An array of integers') |
| |
| # libipmi20.so library |
| option('dynamic-storages-only', type: 'feature', value: 'disabled', description: 'Request to compile storage commands in the libipmi20 library') |