| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include "usercommands.hpp" |
| |
| #include "apphandler.hpp" |
| #include "channel_layer.hpp" |
| #include "user_layer.hpp" |
| |
| #include <security/pam_appl.h> |
| |
| #include <ipmid/api.hpp> |
| #include <phosphor-logging/log.hpp> |
| #include <regex> |
| |
| namespace ipmi |
| { |
| |
| using namespace phosphor::logging; |
| |
| static constexpr uint8_t disableUser = 0x00; |
| static constexpr uint8_t enableUser = 0x01; |
| static constexpr uint8_t setPassword = 0x02; |
| static constexpr uint8_t testPassword = 0x03; |
| static constexpr uint8_t passwordKeySize20 = 1; |
| static constexpr uint8_t passwordKeySize16 = 0; |
| |
| /** @struct SetUserAccessReq |
| * |
| * Structure for set user access request command (refer spec sec 22.26) |
| */ |
| struct SetUserAccessReq |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t chNum : 4; |
| uint8_t ipmiEnabled : 1; |
| uint8_t linkAuthEnabled : 1; |
| uint8_t accessCallback : 1; |
| uint8_t bitsUpdate : 1; |
| uint8_t userId : 6; |
| uint8_t reserved1 : 2; |
| uint8_t privilege : 4; |
| uint8_t reserved2 : 4; |
| uint8_t sessLimit : 4; // optional byte 4 |
| uint8_t reserved3 : 4; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t bitsUpdate : 1; |
| uint8_t accessCallback : 1; |
| uint8_t linkAuthEnabled : 1; |
| uint8_t ipmiEnabled : 1; |
| uint8_t chNum : 4; |
| uint8_t reserved1 : 2; |
| uint8_t userId : 6; |
| uint8_t reserved2 : 4; |
| uint8_t privilege : 4; |
| uint8_t reserved3 : 4; |
| uint8_t sessLimit : 4; // optional byte 4 |
| #endif |
| |
| } __attribute__((packed)); |
| |
| /** @struct GetUserAccessReq |
| * |
| * Structure for get user access request command (refer spec sec 22.27) |
| */ |
| struct GetUserAccessReq |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t chNum : 4; |
| uint8_t reserved1 : 4; |
| uint8_t userId : 6; |
| uint8_t reserved2 : 2; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t reserved1 : 4; |
| uint8_t chNum : 4; |
| uint8_t reserved2 : 2; |
| uint8_t userId : 6; |
| #endif |
| } __attribute__((packed)); |
| |
| /** @struct GetUserAccessResp |
| * |
| * Structure for get user access response command (refer spec sec 22.27) |
| */ |
| struct GetUserAccessResp |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t maxChUsers : 6; |
| uint8_t reserved1 : 2; |
| uint8_t enabledUsers : 6; |
| uint8_t enabledStatus : 2; |
| uint8_t fixedUsers : 6; |
| uint8_t reserved2 : 2; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t reserved1 : 2; |
| uint8_t maxChUsers : 6; |
| uint8_t enabledStatus : 2; |
| uint8_t enabledUsers : 6; |
| uint8_t reserved2 : 2; |
| uint8_t fixedUsers : 6; |
| #endif |
| PrivAccess privAccess; |
| } __attribute__((packed)); |
| |
| /** @struct SetUserNameReq |
| * |
| * Structure for set user name request command (refer spec sec 22.28) |
| */ |
| struct SetUserNameReq |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t userId : 6; |
| uint8_t reserved1 : 2; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t reserved1 : 2; |
| uint8_t userId : 6; |
| #endif |
| uint8_t userName[16]; |
| } __attribute__((packed)); |
| |
| /** @struct GetUserNameReq |
| * |
| * Structure for get user name request command (refer spec sec 22.29) |
| */ |
| struct GetUserNameReq |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t userId : 6; |
| uint8_t reserved1 : 2; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t reserved1 : 2; |
| uint8_t userId : 6; |
| #endif |
| } __attribute__((packed)); |
| |
| /** @struct GetUserNameResp |
| * |
| * Structure for get user name response command (refer spec sec 22.29) |
| */ |
| struct GetUserNameResp |
| { |
| uint8_t userName[16]; |
| } __attribute__((packed)); |
| |
| /** @struct SetUserPasswordReq |
| * |
| * Structure for set user password request command (refer spec sec 22.30) |
| */ |
| struct SetUserPasswordReq |
| { |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| uint8_t userId : 6; |
| uint8_t reserved1 : 1; |
| uint8_t ipmi20 : 1; |
| uint8_t operation : 2; |
| uint8_t reserved2 : 6; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| uint8_t ipmi20 : 1; |
| uint8_t reserved1 : 1; |
| uint8_t userId : 6; |
| uint8_t reserved2 : 6; |
| uint8_t operation : 2; |
| #endif |
| uint8_t userPassword[maxIpmi20PasswordSize]; |
| } __attribute__((packed)); |
| |
| ipmi_ret_t ipmiSetUserAccess(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| const SetUserAccessReq* req = static_cast<SetUserAccessReq*>(request); |
| size_t reqLength = *dataLen; |
| *dataLen = 0; |
| |
| if (!(reqLength == sizeof(*req) || |
| (reqLength == (sizeof(*req) - sizeof(uint8_t) /* skip optional*/)))) |
| { |
| log<level::DEBUG>("Set user access - Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| uint8_t chNum = convertCurrentChannelNum(req->chNum); |
| if (req->reserved1 != 0 || req->reserved2 != 0 || req->reserved3 != 0 || |
| req->sessLimit != 0 || (!isValidChannel(chNum)) || |
| (!ipmiUserIsValidPrivilege(req->privilege)) || |
| (EChannelSessSupported::none == getChannelSessionSupport(chNum))) |
| { |
| log<level::DEBUG>("Set user access - Invalid field in request"); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| if (!ipmiUserIsValidUserId(req->userId)) |
| { |
| log<level::DEBUG>("Set user access - Parameter out of range"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| PrivAccess privAccess = {0}; |
| if (req->bitsUpdate) |
| { |
| privAccess.ipmiEnabled = req->ipmiEnabled; |
| privAccess.linkAuthEnabled = req->linkAuthEnabled; |
| privAccess.accessCallback = req->accessCallback; |
| } |
| privAccess.privilege = req->privilege; |
| return ipmiUserSetPrivilegeAccess(req->userId, chNum, privAccess, |
| req->bitsUpdate); |
| } |
| |
| ipmi_ret_t ipmiGetUserAccess(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| const GetUserAccessReq* req = static_cast<GetUserAccessReq*>(request); |
| size_t reqLength = *dataLen; |
| ipmi_ret_t retStatus = IPMI_CC_OK; |
| |
| *dataLen = 0; |
| |
| if (reqLength != sizeof(*req)) |
| { |
| log<level::DEBUG>("Get user access - Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| uint8_t chNum = convertCurrentChannelNum(req->chNum); |
| if (req->reserved1 != 0 || req->reserved2 != 0 || |
| (!isValidChannel(chNum)) || |
| (EChannelSessSupported::none == getChannelSessionSupport(chNum))) |
| { |
| log<level::DEBUG>("Get user access - Invalid field in request"); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| if (!ipmiUserIsValidUserId(req->userId)) |
| { |
| log<level::DEBUG>("Get user access - Parameter out of range"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| uint8_t maxChUsers = 0, enabledUsers = 0, fixedUsers = 0; |
| bool enabledState = false; |
| GetUserAccessResp* resp = static_cast<GetUserAccessResp*>(response); |
| |
| std::fill(reinterpret_cast<uint8_t*>(resp), |
| reinterpret_cast<uint8_t*>(resp) + sizeof(*resp), 0); |
| |
| retStatus = ipmiUserGetAllCounts(maxChUsers, enabledUsers, fixedUsers); |
| if (retStatus != IPMI_CC_OK) |
| { |
| return retStatus; |
| } |
| |
| resp->maxChUsers = maxChUsers; |
| resp->enabledUsers = enabledUsers; |
| resp->fixedUsers = fixedUsers; |
| |
| retStatus = ipmiUserCheckEnabled(req->userId, enabledState); |
| if (retStatus != IPMI_CC_OK) |
| { |
| return retStatus; |
| } |
| |
| resp->enabledStatus = enabledState ? userIdEnabledViaSetPassword |
| : userIdDisabledViaSetPassword; |
| *dataLen = sizeof(*resp); |
| return ipmiUserGetPrivilegeAccess(req->userId, chNum, resp->privAccess); |
| } |
| |
| ipmi_ret_t ipmiSetUserName(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| const SetUserNameReq* req = static_cast<SetUserNameReq*>(request); |
| size_t reqLength = *dataLen; |
| *dataLen = 0; |
| |
| if (reqLength != sizeof(*req)) |
| { |
| log<level::DEBUG>("Set user name - Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| if (req->reserved1) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| if (!ipmiUserIsValidUserId(req->userId)) |
| { |
| log<level::DEBUG>("Set user name - Invalid user id"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| return ipmiUserSetUserName(req->userId, |
| reinterpret_cast<const char*>(req->userName)); |
| } |
| |
| /** @brief implementes the get user name command |
| * @param[in] netfn - specifies netfn. |
| * @param[in] cmd - specifies cmd number. |
| * @param[in] request - pointer to request data. |
| * @param[in, out] dataLen - specifies request data length, and returns |
| * response data length. |
| * @param[in] context - ipmi context. |
| * @returns ipmi completion code. |
| */ |
| ipmi_ret_t ipmiGetUserName(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| const GetUserNameReq* req = static_cast<GetUserNameReq*>(request); |
| size_t reqLength = *dataLen; |
| |
| *dataLen = 0; |
| |
| if (reqLength != sizeof(*req)) |
| { |
| log<level::DEBUG>("Get user name - Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| std::string userName; |
| if (ipmiUserGetUserName(req->userId, userName) != IPMI_CC_OK) |
| { // Invalid User ID |
| log<level::DEBUG>("User Name not found", |
| entry("USER-ID:%d", (uint8_t)req->userId)); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| GetUserNameResp* resp = static_cast<GetUserNameResp*>(response); |
| std::fill(reinterpret_cast<uint8_t*>(resp), |
| reinterpret_cast<uint8_t*>(resp) + sizeof(*resp), 0); |
| userName.copy(reinterpret_cast<char*>(resp->userName), |
| sizeof(resp->userName), 0); |
| *dataLen = sizeof(*resp); |
| |
| return IPMI_CC_OK; |
| } |
| |
| /** @brief implementes the set user password command |
| * @param[in] netfn - specifies netfn. |
| * @param[in] cmd - specifies cmd number. |
| * @param[in] request - pointer to request data. |
| * @param[in, out] dataLen - specifies request data length, and returns |
| * response data length. |
| * @param[in] context - ipmi context. |
| * @returns ipmi completion code. |
| */ |
| ipmi_ret_t ipmiSetUserPassword(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| const SetUserPasswordReq* req = static_cast<SetUserPasswordReq*>(request); |
| size_t reqLength = *dataLen; |
| // subtract 2 bytes header to know the password length - including NULL |
| uint8_t passwordLength = *dataLen - 2; |
| *dataLen = 0; |
| |
| // verify input length based on operation. Required password size is 20 |
| // bytes as we support only IPMI 2.0, but in order to be compatible with |
| // tools, accept 16 bytes of password size too. |
| if (reqLength < 2 || |
| // If enable / disable user, reqLength has to be >=2 & <= 22 |
| ((req->operation == disableUser || req->operation == enableUser) && |
| ((reqLength < 2) || (reqLength > sizeof(SetUserPasswordReq))))) |
| { |
| log<level::DEBUG>("Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| // If set / test password then password length has to be 16 or 20 bytes |
| // based on the password size bit. |
| if (((req->operation == setPassword) || (req->operation == testPassword)) && |
| (((req->ipmi20 == passwordKeySize20) && |
| (passwordLength != maxIpmi20PasswordSize)) || |
| ((req->ipmi20 == passwordKeySize16) && |
| (passwordLength != maxIpmi15PasswordSize)))) |
| { |
| log<level::DEBUG>("Invalid Length"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| std::string userName; |
| if (ipmiUserGetUserName(req->userId, userName) != IPMI_CC_OK) |
| { |
| log<level::DEBUG>("User Name not found", |
| entry("USER-ID:%d", (uint8_t)req->userId)); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| if (req->operation == setPassword) |
| { |
| return ipmiUserSetUserPassword( |
| req->userId, reinterpret_cast<const char*>(req->userPassword)); |
| } |
| else if (req->operation == enableUser || req->operation == disableUser) |
| { |
| return ipmiUserUpdateEnabledState(req->userId, |
| static_cast<bool>(req->operation)); |
| } |
| else if (req->operation == testPassword) |
| { |
| auto password = ipmiUserGetPassword(userName); |
| std::string testPassword( |
| reinterpret_cast<const char*>(req->userPassword), 0, |
| passwordLength); |
| // Note: For security reasons password size won't be compared and |
| // wrong password size completion code will not be returned if size |
| // doesn't match as specified in IPMI specification. |
| if (password != testPassword) |
| { |
| log<level::DEBUG>("Test password failed", |
| entry("USER-ID:%d", (uint8_t)req->userId)); |
| return static_cast<ipmi_ret_t>( |
| IPMISetPasswordReturnCodes::ipmiCCPasswdFailMismatch); |
| } |
| return IPMI_CC_OK; |
| } |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| void registerUserIpmiFunctions() __attribute__((constructor)); |
| void registerUserIpmiFunctions() |
| { |
| ipmiUserInit(); |
| ipmi_register_callback(NETFUN_APP, IPMI_CMD_SET_USER_ACCESS, NULL, |
| ipmiSetUserAccess, PRIVILEGE_ADMIN); |
| |
| ipmi_register_callback(NETFUN_APP, IPMI_CMD_GET_USER_ACCESS, NULL, |
| ipmiGetUserAccess, PRIVILEGE_OPERATOR); |
| |
| ipmi_register_callback(NETFUN_APP, IPMI_CMD_GET_USER_NAME, NULL, |
| ipmiGetUserName, PRIVILEGE_OPERATOR); |
| |
| ipmi_register_callback(NETFUN_APP, IPMI_CMD_SET_USER_NAME, NULL, |
| ipmiSetUserName, PRIVILEGE_ADMIN); |
| |
| ipmi_register_callback(NETFUN_APP, IPMI_CMD_SET_USER_PASSWORD, NULL, |
| ipmiSetUserPassword, PRIVILEGE_ADMIN); |
| |
| return; |
| } |
| } // namespace ipmi |