| # Sensor id is the key |
| 0x60: |
| sensorType: 0x07 |
| sensorReadingType: 0x6F |
| # A "set" operation on this sensor should update this d-bus path. |
| # If the path is not specified, an MRW parser will try to determine the path |
| # based on the sensor id, on MRW based systems. This typically happens for |
| # inventory items. |
| path: /org/open_power/control/occ0 |
| # The interface that exposes method(s) to update the path above. |
| serviceInterface: org.freedesktop.DBus.Properties |
| # Where the sensor value is represented - assertion bits/reading/event data |
| readingType: assertion |
| eventType: 0x6F |
| # All the d-bus interfaces : properties that must be updated for this path |
| interfaces: |
| # One or more interface dict entries |
| org.open_power.OCC.Status: |
| OccActive: |
| # Sensor type specific offset |
| 0x06: |
| # OccActive is a boolean |
| type: "bool" |
| # If offset 0x06 is asserted, set OccActive as false. |
| assert: "false" |
| deassert: "true" |
| |
| 0x61: |
| sensorType: 0x04 |
| sensorReadingType: 0x6F |
| # Inventory paths intentionally leave out the inventory root, |
| # /xyz/openbmc_project/inventory, because phosphor-inventory-manager |
| # adds that. |
| path: /system/chassis/motherboard/dimm1 |
| serviceInterface: xyz.openbmc_project.Inventory.Manager |
| readingType: assertion |
| interfaces: |
| xyz.openbmc_project.Inventory.Item: |
| Present: |
| 6: |
| assert: true |
| deassert: false |
| type: bool |
| xyz.openbmc_project.State.Decorator.OperationalStatus: |
| Functional: |
| 4: |
| assert: false |
| deassert: true |
| type: bool |
| |
| 0x63: |
| interfaces: |
| xyz.openbmc_project.Control.Boot.RebootAttempts: |
| AttemptsLeft: |
| 0xFF: |
| type: uint32_t |
| path: /xyz/openbmc_project/state/host0 |
| # A special case of assertion, where the entire assert bitfield |
| # serves as the value, or reading. Hence, the offset above is intentionally |
| # 0xFF, to indicate not to check any specific bits in the assertion. |
| readingType: readingAssertion |
| sensorReadingType: 0x6F |
| sensorType: 0xC3 |
| serviceInterface: org.freedesktop.DBus.Properties |
| |
| 0x62: |
| interfaces: |
| xyz.openbmc_project.Control.Boot.RebootAttempts: |
| AttemptsLeft: |
| 0xFF: |
| type: uint32_t |
| path: /xyz/openbmc_project/state/host1 |
| readingType: readingAssertion |
| sensorReadingType: 0x6F |
| sensorType: 0xC3 |
| serviceInterface: org.freedesktop.DBus.Properties |