| #include "config.h" |
| |
| #include "dcmihandler.hpp" |
| |
| #include "user_channel/channel_layer.hpp" |
| |
| #include <bitset> |
| #include <cmath> |
| #include <fstream> |
| #include <ipmid/api.hpp> |
| #include <ipmid/utils.hpp> |
| #include <nlohmann/json.hpp> |
| #include <phosphor-logging/elog-errors.hpp> |
| #include <phosphor-logging/log.hpp> |
| #include <sdbusplus/bus.hpp> |
| #include <variant> |
| #include <xyz/openbmc_project/Common/error.hpp> |
| |
| using namespace phosphor::logging; |
| using InternalFailure = |
| sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure; |
| |
| void register_netfn_dcmi_functions() __attribute__((constructor)); |
| |
| constexpr auto PCAP_PATH = "/xyz/openbmc_project/control/host0/power_cap"; |
| constexpr auto PCAP_INTERFACE = "xyz.openbmc_project.Control.Power.Cap"; |
| |
| constexpr auto POWER_CAP_PROP = "PowerCap"; |
| constexpr auto POWER_CAP_ENABLE_PROP = "PowerCapEnable"; |
| |
| constexpr auto DCMI_PARAMETER_REVISION = 2; |
| constexpr auto DCMI_SPEC_MAJOR_VERSION = 1; |
| constexpr auto DCMI_SPEC_MINOR_VERSION = 5; |
| constexpr auto DCMI_CONFIG_PARAMETER_REVISION = 1; |
| constexpr auto DCMI_RAND_BACK_OFF_MASK = 0x80; |
| constexpr auto DCMI_OPTION_60_43_MASK = 0x02; |
| constexpr auto DCMI_OPTION_12_MASK = 0x01; |
| constexpr auto DCMI_ACTIVATE_DHCP_MASK = 0x01; |
| constexpr auto DCMI_ACTIVATE_DHCP_REPLY = 0x00; |
| constexpr auto DCMI_SET_CONF_PARAM_REQ_PACKET_MAX_SIZE = 0x04; |
| constexpr auto DCMI_SET_CONF_PARAM_REQ_PACKET_MIN_SIZE = 0x03; |
| constexpr auto DHCP_TIMING1 = 0x04; // 4 sec |
| constexpr auto DHCP_TIMING2_UPPER = 0x00; // 2 min |
| constexpr auto DHCP_TIMING2_LOWER = 0x78; |
| constexpr auto DHCP_TIMING3_UPPER = 0x00; // 64 sec |
| constexpr auto DHCP_TIMING3_LOWER = 0x40; |
| // When DHCP Option 12 is enabled the string "SendHostName=true" will be |
| // added into n/w configuration file and the parameter |
| // SendHostNameEnabled will set to true. |
| constexpr auto DHCP_OPT12_ENABLED = "SendHostNameEnabled"; |
| |
| constexpr auto SENSOR_VALUE_INTF = "xyz.openbmc_project.Sensor.Value"; |
| constexpr auto SENSOR_VALUE_PROP = "Value"; |
| constexpr auto SENSOR_SCALE_PROP = "Scale"; |
| |
| using namespace phosphor::logging; |
| |
| namespace dcmi |
| { |
| |
| // Refer Table 6-14, DCMI Entity ID Extension, DCMI v1.5 spec |
| static const std::map<uint8_t, std::string> entityIdToName{ |
| {0x40, "inlet"}, {0x37, "inlet"}, {0x41, "cpu"}, |
| {0x03, "cpu"}, {0x42, "baseboard"}, {0x07, "baseboard"}}; |
| |
| bool isDCMIPowerMgmtSupported() |
| { |
| auto data = parseJSONConfig(gDCMICapabilitiesConfig); |
| |
| return (gDCMIPowerMgmtSupported == data.value(gDCMIPowerMgmtCapability, 0)); |
| } |
| |
| uint32_t getPcap(sdbusplus::bus::bus& bus) |
| { |
| auto settingService = ipmi::getService(bus, PCAP_INTERFACE, PCAP_PATH); |
| |
| auto method = bus.new_method_call(settingService.c_str(), PCAP_PATH, |
| "org.freedesktop.DBus.Properties", "Get"); |
| |
| method.append(PCAP_INTERFACE, POWER_CAP_PROP); |
| auto reply = bus.call(method); |
| |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in getPcap prop"); |
| elog<InternalFailure>(); |
| } |
| std::variant<uint32_t> pcap; |
| reply.read(pcap); |
| |
| return std::get<uint32_t>(pcap); |
| } |
| |
| bool getPcapEnabled(sdbusplus::bus::bus& bus) |
| { |
| auto settingService = ipmi::getService(bus, PCAP_INTERFACE, PCAP_PATH); |
| |
| auto method = bus.new_method_call(settingService.c_str(), PCAP_PATH, |
| "org.freedesktop.DBus.Properties", "Get"); |
| |
| method.append(PCAP_INTERFACE, POWER_CAP_ENABLE_PROP); |
| auto reply = bus.call(method); |
| |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in getPcapEnabled prop"); |
| elog<InternalFailure>(); |
| } |
| std::variant<bool> pcapEnabled; |
| reply.read(pcapEnabled); |
| |
| return std::get<bool>(pcapEnabled); |
| } |
| |
| void setPcap(sdbusplus::bus::bus& bus, const uint32_t powerCap) |
| { |
| auto service = ipmi::getService(bus, PCAP_INTERFACE, PCAP_PATH); |
| |
| auto method = bus.new_method_call(service.c_str(), PCAP_PATH, |
| "org.freedesktop.DBus.Properties", "Set"); |
| |
| method.append(PCAP_INTERFACE, POWER_CAP_PROP); |
| method.append(std::variant<uint32_t>(powerCap)); |
| |
| auto reply = bus.call(method); |
| |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in setPcap property"); |
| elog<InternalFailure>(); |
| } |
| } |
| |
| void setPcapEnable(sdbusplus::bus::bus& bus, bool enabled) |
| { |
| auto service = ipmi::getService(bus, PCAP_INTERFACE, PCAP_PATH); |
| |
| auto method = bus.new_method_call(service.c_str(), PCAP_PATH, |
| "org.freedesktop.DBus.Properties", "Set"); |
| |
| method.append(PCAP_INTERFACE, POWER_CAP_ENABLE_PROP); |
| method.append(std::variant<bool>(enabled)); |
| |
| auto reply = bus.call(method); |
| |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in setPcapEnabled property"); |
| elog<InternalFailure>(); |
| } |
| } |
| |
| void readAssetTagObjectTree(dcmi::assettag::ObjectTree& objectTree) |
| { |
| static constexpr auto mapperBusName = "xyz.openbmc_project.ObjectMapper"; |
| static constexpr auto mapperObjPath = "/xyz/openbmc_project/object_mapper"; |
| static constexpr auto mapperIface = "xyz.openbmc_project.ObjectMapper"; |
| static constexpr auto inventoryRoot = "/xyz/openbmc_project/inventory/"; |
| |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| auto depth = 0; |
| |
| auto mapperCall = bus.new_method_call(mapperBusName, mapperObjPath, |
| mapperIface, "GetSubTree"); |
| |
| mapperCall.append(inventoryRoot); |
| mapperCall.append(depth); |
| mapperCall.append(std::vector<std::string>({dcmi::assetTagIntf})); |
| |
| auto mapperReply = bus.call(mapperCall); |
| if (mapperReply.is_method_error()) |
| { |
| log<level::ERR>("Error in mapper call"); |
| elog<InternalFailure>(); |
| } |
| |
| mapperReply.read(objectTree); |
| |
| if (objectTree.empty()) |
| { |
| log<level::ERR>("AssetTag property is not populated"); |
| elog<InternalFailure>(); |
| } |
| } |
| |
| std::string readAssetTag() |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| dcmi::assettag::ObjectTree objectTree; |
| |
| // Read the object tree with the inventory root to figure out the object |
| // that has implemented the Asset tag interface. |
| readAssetTagObjectTree(objectTree); |
| |
| auto method = bus.new_method_call( |
| (objectTree.begin()->second.begin()->first).c_str(), |
| (objectTree.begin()->first).c_str(), dcmi::propIntf, "Get"); |
| method.append(dcmi::assetTagIntf); |
| method.append(dcmi::assetTagProp); |
| |
| auto reply = bus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in reading asset tag"); |
| elog<InternalFailure>(); |
| } |
| |
| std::variant<std::string> assetTag; |
| reply.read(assetTag); |
| |
| return std::get<std::string>(assetTag); |
| } |
| |
| void writeAssetTag(const std::string& assetTag) |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| dcmi::assettag::ObjectTree objectTree; |
| |
| // Read the object tree with the inventory root to figure out the object |
| // that has implemented the Asset tag interface. |
| readAssetTagObjectTree(objectTree); |
| |
| auto method = bus.new_method_call( |
| (objectTree.begin()->second.begin()->first).c_str(), |
| (objectTree.begin()->first).c_str(), dcmi::propIntf, "Set"); |
| method.append(dcmi::assetTagIntf); |
| method.append(dcmi::assetTagProp); |
| method.append(std::variant<std::string>(assetTag)); |
| |
| auto reply = bus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in writing asset tag"); |
| elog<InternalFailure>(); |
| } |
| } |
| |
| std::string getHostName(void) |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| auto service = ipmi::getService(bus, networkConfigIntf, networkConfigObj); |
| auto value = ipmi::getDbusProperty(bus, service, networkConfigObj, |
| networkConfigIntf, hostNameProp); |
| |
| return std::get<std::string>(value); |
| } |
| |
| bool getDHCPEnabled() |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| auto ethdevice = ipmi::getChannelName(ethernetDefaultChannelNum); |
| auto ethernetObj = |
| ipmi::getDbusObject(bus, ethernetIntf, networkRoot, ethdevice); |
| auto service = ipmi::getService(bus, ethernetIntf, ethernetObj.first); |
| auto value = ipmi::getDbusProperty(bus, service, ethernetObj.first, |
| ethernetIntf, "DHCPEnabled"); |
| |
| return std::get<bool>(value); |
| } |
| |
| bool getDHCPOption(std::string prop) |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| auto service = ipmi::getService(bus, dhcpIntf, dhcpObj); |
| auto value = ipmi::getDbusProperty(bus, service, dhcpObj, dhcpIntf, prop); |
| |
| return std::get<bool>(value); |
| } |
| |
| void setDHCPOption(std::string prop, bool value) |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| auto service = ipmi::getService(bus, dhcpIntf, dhcpObj); |
| ipmi::setDbusProperty(bus, service, dhcpObj, dhcpIntf, prop, value); |
| } |
| |
| Json parseJSONConfig(const std::string& configFile) |
| { |
| std::ifstream jsonFile(configFile); |
| if (!jsonFile.is_open()) |
| { |
| log<level::ERR>("Temperature readings JSON file not found"); |
| elog<InternalFailure>(); |
| } |
| |
| auto data = Json::parse(jsonFile, nullptr, false); |
| if (data.is_discarded()) |
| { |
| log<level::ERR>("Temperature readings JSON parser failure"); |
| elog<InternalFailure>(); |
| } |
| |
| return data; |
| } |
| |
| } // namespace dcmi |
| |
| ipmi_ret_t getPowerLimit(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| if (!dcmi::isDCMIPowerMgmtSupported()) |
| { |
| *data_len = 0; |
| log<level::ERR>("DCMI Power management is unsupported!"); |
| return IPMI_CC_INVALID; |
| } |
| |
| std::vector<uint8_t> outPayload(sizeof(dcmi::GetPowerLimitResponse)); |
| auto responseData = |
| reinterpret_cast<dcmi::GetPowerLimitResponse*>(outPayload.data()); |
| |
| sdbusplus::bus::bus sdbus{ipmid_get_sd_bus_connection()}; |
| uint32_t pcapValue = 0; |
| bool pcapEnable = false; |
| |
| try |
| { |
| pcapValue = dcmi::getPcap(sdbus); |
| pcapEnable = dcmi::getPcapEnabled(sdbus); |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| /* |
| * Exception action if power limit is exceeded and cannot be controlled |
| * with the correction time limit is hardcoded to Hard Power Off system |
| * and log event to SEL. |
| */ |
| constexpr auto exception = 0x01; |
| responseData->exceptionAction = exception; |
| |
| responseData->powerLimit = static_cast<uint16_t>(pcapValue); |
| |
| /* |
| * Correction time limit and Statistics sampling period is currently not |
| * populated. |
| */ |
| |
| *data_len = outPayload.size(); |
| memcpy(response, outPayload.data(), *data_len); |
| |
| if (pcapEnable) |
| { |
| return IPMI_CC_OK; |
| } |
| else |
| { |
| return IPMI_DCMI_CC_NO_ACTIVE_POWER_LIMIT; |
| } |
| } |
| |
| ipmi_ret_t setPowerLimit(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| if (!dcmi::isDCMIPowerMgmtSupported()) |
| { |
| *data_len = 0; |
| log<level::ERR>("DCMI Power management is unsupported!"); |
| return IPMI_CC_INVALID; |
| } |
| |
| auto requestData = |
| reinterpret_cast<const dcmi::SetPowerLimitRequest*>(request); |
| |
| sdbusplus::bus::bus sdbus{ipmid_get_sd_bus_connection()}; |
| |
| // Only process the power limit requested in watts. |
| try |
| { |
| dcmi::setPcap(sdbus, requestData->powerLimit); |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| log<level::INFO>("Set Power Cap", |
| entry("POWERCAP=%u", requestData->powerLimit)); |
| |
| *data_len = 0; |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t applyPowerLimit(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| if (!dcmi::isDCMIPowerMgmtSupported()) |
| { |
| *data_len = 0; |
| log<level::ERR>("DCMI Power management is unsupported!"); |
| return IPMI_CC_INVALID; |
| } |
| |
| auto requestData = |
| reinterpret_cast<const dcmi::ApplyPowerLimitRequest*>(request); |
| |
| sdbusplus::bus::bus sdbus{ipmid_get_sd_bus_connection()}; |
| |
| try |
| { |
| dcmi::setPcapEnable(sdbus, |
| static_cast<bool>(requestData->powerLimitAction)); |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| log<level::INFO>("Set Power Cap Enable", |
| entry("POWERCAPENABLE=%u", requestData->powerLimitAction)); |
| |
| *data_len = 0; |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t getAssetTag(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::GetAssetTagRequest*>(request); |
| std::vector<uint8_t> outPayload(sizeof(dcmi::GetAssetTagResponse)); |
| auto responseData = |
| reinterpret_cast<dcmi::GetAssetTagResponse*>(outPayload.data()); |
| |
| // Verify offset to read and number of bytes to read are not exceeding the |
| // range. |
| if ((requestData->offset > dcmi::assetTagMaxOffset) || |
| (requestData->bytes > dcmi::maxBytes) || |
| ((requestData->offset + requestData->bytes) > dcmi::assetTagMaxSize)) |
| { |
| *data_len = 0; |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| std::string assetTag; |
| |
| try |
| { |
| assetTag = dcmi::readAssetTag(); |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| // Return if the asset tag is not populated. |
| if (!assetTag.size()) |
| { |
| responseData->tagLength = 0; |
| memcpy(response, outPayload.data(), outPayload.size()); |
| *data_len = outPayload.size(); |
| return IPMI_CC_OK; |
| } |
| |
| // If the asset tag is longer than 63 bytes, restrict it to 63 bytes to suit |
| // Get Asset Tag command. |
| if (assetTag.size() > dcmi::assetTagMaxSize) |
| { |
| assetTag.resize(dcmi::assetTagMaxSize); |
| } |
| |
| // If the requested offset is beyond the asset tag size. |
| if (requestData->offset >= assetTag.size()) |
| { |
| *data_len = 0; |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| auto returnData = assetTag.substr(requestData->offset, requestData->bytes); |
| |
| responseData->tagLength = assetTag.size(); |
| |
| memcpy(response, outPayload.data(), outPayload.size()); |
| memcpy(static_cast<uint8_t*>(response) + outPayload.size(), |
| returnData.data(), returnData.size()); |
| *data_len = outPayload.size() + returnData.size(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t setAssetTag(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::SetAssetTagRequest*>(request); |
| std::vector<uint8_t> outPayload(sizeof(dcmi::SetAssetTagResponse)); |
| auto responseData = |
| reinterpret_cast<dcmi::SetAssetTagResponse*>(outPayload.data()); |
| |
| // Verify offset to read and number of bytes to read are not exceeding the |
| // range. |
| if ((requestData->offset > dcmi::assetTagMaxOffset) || |
| (requestData->bytes > dcmi::maxBytes) || |
| ((requestData->offset + requestData->bytes) > dcmi::assetTagMaxSize)) |
| { |
| *data_len = 0; |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| std::string assetTag; |
| |
| try |
| { |
| assetTag = dcmi::readAssetTag(); |
| |
| if (requestData->offset > assetTag.size()) |
| { |
| *data_len = 0; |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| assetTag.replace(requestData->offset, |
| assetTag.size() - requestData->offset, |
| static_cast<const char*>(request) + |
| sizeof(dcmi::SetAssetTagRequest), |
| requestData->bytes); |
| |
| dcmi::writeAssetTag(assetTag); |
| |
| responseData->tagLength = assetTag.size(); |
| memcpy(response, outPayload.data(), outPayload.size()); |
| *data_len = outPayload.size(); |
| |
| return IPMI_CC_OK; |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| |
| ipmi_ret_t getMgmntCtrlIdStr(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::GetMgmntCtrlIdStrRequest*>(request); |
| auto responseData = |
| reinterpret_cast<dcmi::GetMgmntCtrlIdStrResponse*>(response); |
| std::string hostName; |
| |
| *data_len = 0; |
| |
| if (requestData->bytes > dcmi::maxBytes || |
| requestData->offset + requestData->bytes > dcmi::maxCtrlIdStrLen) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| try |
| { |
| hostName = dcmi::getHostName(); |
| } |
| catch (InternalFailure& e) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| if (requestData->offset > hostName.length()) |
| { |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| auto responseStr = hostName.substr(requestData->offset, requestData->bytes); |
| auto responseStrLen = std::min(static_cast<std::size_t>(requestData->bytes), |
| responseStr.length() + 1); |
| responseData->strLen = hostName.length(); |
| std::copy(begin(responseStr), end(responseStr), responseData->data); |
| |
| *data_len = sizeof(*responseData) + responseStrLen; |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t setMgmntCtrlIdStr(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| static std::array<char, dcmi::maxCtrlIdStrLen + 1> newCtrlIdStr; |
| |
| auto requestData = |
| reinterpret_cast<const dcmi::SetMgmntCtrlIdStrRequest*>(request); |
| auto responseData = |
| reinterpret_cast<dcmi::SetMgmntCtrlIdStrResponse*>(response); |
| |
| *data_len = 0; |
| |
| if (requestData->bytes > dcmi::maxBytes || |
| requestData->offset + requestData->bytes > dcmi::maxCtrlIdStrLen + 1 || |
| (requestData->offset + requestData->bytes == |
| dcmi::maxCtrlIdStrLen + 1 && |
| requestData->data[requestData->bytes - 1] != '\0')) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| try |
| { |
| /* if there is no old value and offset is not 0 */ |
| if (newCtrlIdStr[0] == '\0' && requestData->offset != 0) |
| { |
| /* read old ctrlIdStr */ |
| auto hostName = dcmi::getHostName(); |
| hostName.resize(dcmi::maxCtrlIdStrLen); |
| std::copy(begin(hostName), end(hostName), begin(newCtrlIdStr)); |
| newCtrlIdStr[hostName.length()] = '\0'; |
| } |
| |
| /* replace part of string and mark byte after the last as \0 */ |
| auto restStrIter = |
| std::copy_n(requestData->data, requestData->bytes, |
| begin(newCtrlIdStr) + requestData->offset); |
| /* if the last written byte is not 64th - add '\0' */ |
| if (requestData->offset + requestData->bytes <= dcmi::maxCtrlIdStrLen) |
| { |
| *restStrIter = '\0'; |
| } |
| |
| /* if input data contains '\0' whole string is sent - update hostname */ |
| auto it = std::find(requestData->data, |
| requestData->data + requestData->bytes, '\0'); |
| if (it != requestData->data + requestData->bytes) |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| ipmi::setDbusProperty(bus, dcmi::networkServiceName, |
| dcmi::networkConfigObj, |
| dcmi::networkConfigIntf, dcmi::hostNameProp, |
| std::string(newCtrlIdStr.data())); |
| } |
| } |
| catch (InternalFailure& e) |
| { |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| responseData->offset = requestData->offset + requestData->bytes; |
| *data_len = sizeof(*responseData); |
| return IPMI_CC_OK; |
| } |
| |
| // List of the capabilities under each parameter |
| dcmi::DCMICaps dcmiCaps = { |
| // Supported DCMI Capabilities |
| {dcmi::DCMICapParameters::SUPPORTED_DCMI_CAPS, |
| {3, |
| {{"PowerManagement", 2, 0, 1}, |
| {"OOBSecondaryLan", 3, 2, 1}, |
| {"SerialTMODE", 3, 1, 1}, |
| {"InBandSystemInterfaceChannel", 3, 0, 1}}}}, |
| // Mandatory Platform Attributes |
| {dcmi::DCMICapParameters::MANDATORY_PLAT_ATTRIBUTES, |
| {5, |
| {{"SELAutoRollOver", 1, 15, 1}, |
| {"FlushEntireSELUponRollOver", 1, 14, 1}, |
| {"RecordLevelSELFlushUponRollOver", 1, 13, 1}, |
| {"NumberOfSELEntries", 1, 0, 12}, |
| {"TempMonitoringSamplingFreq", 5, 0, 8}}}}, |
| // Optional Platform Attributes |
| {dcmi::DCMICapParameters::OPTIONAL_PLAT_ATTRIBUTES, |
| {2, |
| {{"PowerMgmtDeviceSlaveAddress", 1, 1, 7}, |
| {"BMCChannelNumber", 2, 4, 4}, |
| {"DeviceRivision", 2, 0, 4}}}}, |
| // Manageability Access Attributes |
| {dcmi::DCMICapParameters::MANAGEABILITY_ACCESS_ATTRIBUTES, |
| {3, |
| {{"MandatoryPrimaryLanOOBSupport", 1, 0, 8}, |
| {"OptionalSecondaryLanOOBSupport", 2, 0, 8}, |
| {"OptionalSerialOOBMTMODECapability", 3, 0, 8}}}}}; |
| |
| ipmi_ret_t getDCMICapabilities(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| |
| std::ifstream dcmiCapFile(dcmi::gDCMICapabilitiesConfig); |
| if (!dcmiCapFile.is_open()) |
| { |
| log<level::ERR>("DCMI Capabilities file not found"); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| auto data = nlohmann::json::parse(dcmiCapFile, nullptr, false); |
| if (data.is_discarded()) |
| { |
| log<level::ERR>("DCMI Capabilities JSON parser failure"); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| auto requestData = |
| reinterpret_cast<const dcmi::GetDCMICapRequest*>(request); |
| |
| // get list of capabilities in a parameter |
| auto caps = |
| dcmiCaps.find(static_cast<dcmi::DCMICapParameters>(requestData->param)); |
| if (caps == dcmiCaps.end()) |
| { |
| log<level::ERR>("Invalid input parameter"); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| auto responseData = reinterpret_cast<dcmi::GetDCMICapResponse*>(response); |
| |
| // For each capabilities in a parameter fill the data from |
| // the json file based on the capability name. |
| for (auto cap : caps->second.capList) |
| { |
| // If the data is beyond first byte boundary, insert in a |
| // 16bit pattern for example number of SEL entries are represented |
| // in 12bits. |
| if ((cap.length + cap.position) > dcmi::gByteBitSize) |
| { |
| uint16_t val = data.value(cap.name.c_str(), 0); |
| // According to DCMI spec v1.5, max number of SEL entries is |
| // 4096, but bit 12b of DCMI capabilities Mandatory Platform |
| // Attributes field is reserved and therefore we can use only |
| // the provided 12 bits with maximum value of 4095. |
| // We're playing safe here by applying the mask |
| // to ensure that provided value will fit into 12 bits. |
| if (cap.length > dcmi::gByteBitSize) |
| { |
| val &= dcmi::gMaxSELEntriesMask; |
| } |
| val <<= cap.position; |
| responseData->data[cap.bytePosition - 1] |= |
| static_cast<uint8_t>(val); |
| responseData->data[cap.bytePosition] |= val >> dcmi::gByteBitSize; |
| } |
| else |
| { |
| responseData->data[cap.bytePosition - 1] |= |
| data.value(cap.name.c_str(), 0) << cap.position; |
| } |
| } |
| |
| responseData->major = DCMI_SPEC_MAJOR_VERSION; |
| responseData->minor = DCMI_SPEC_MINOR_VERSION; |
| responseData->paramRevision = DCMI_PARAMETER_REVISION; |
| *data_len = sizeof(*responseData) + caps->second.size; |
| |
| return IPMI_CC_OK; |
| } |
| |
| namespace dcmi |
| { |
| namespace temp_readings |
| { |
| |
| Temperature readTemp(const std::string& dbusService, |
| const std::string& dbusPath) |
| { |
| // Read the temperature value from d-bus object. Need some conversion. |
| // As per the interface xyz.openbmc_project.Sensor.Value, the temperature |
| // is an double and in degrees C. It needs to be scaled by using the |
| // formula Value * 10^Scale. The ipmi spec has the temperature as a uint8_t, |
| // with a separate single bit for the sign. |
| |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| auto result = ipmi::getAllDbusProperties( |
| bus, dbusService, dbusPath, "xyz.openbmc_project.Sensor.Value"); |
| auto temperature = |
| std::visit(ipmi::VariantToDoubleVisitor(), result.at("Value")); |
| double absTemp = std::abs(temperature); |
| |
| auto findFactor = result.find("Scale"); |
| double factor = 0.0; |
| if (findFactor != result.end()) |
| { |
| factor = std::visit(ipmi::VariantToDoubleVisitor(), findFactor->second); |
| } |
| double scale = std::pow(10, factor); |
| |
| auto tempDegrees = absTemp * scale; |
| // Max absolute temp as per ipmi spec is 128. |
| if (tempDegrees > maxTemp) |
| { |
| tempDegrees = maxTemp; |
| } |
| |
| return std::make_tuple(static_cast<uint8_t>(tempDegrees), |
| (temperature < 0)); |
| } |
| |
| std::tuple<Response, NumInstances> read(const std::string& type, |
| uint8_t instance) |
| { |
| Response response{}; |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| if (!instance) |
| { |
| log<level::ERR>("Expected non-zero instance"); |
| elog<InternalFailure>(); |
| } |
| |
| auto data = parseJSONConfig(gDCMISensorsConfig); |
| static const std::vector<Json> empty{}; |
| std::vector<Json> readings = data.value(type, empty); |
| size_t numInstances = readings.size(); |
| for (const auto& j : readings) |
| { |
| uint8_t instanceNum = j.value("instance", 0); |
| // Not the instance we're interested in |
| if (instanceNum != instance) |
| { |
| continue; |
| } |
| |
| std::string path = j.value("dbus", ""); |
| std::string service; |
| try |
| { |
| service = |
| ipmi::getService(bus, "xyz.openbmc_project.Sensor.Value", path); |
| } |
| catch (std::exception& e) |
| { |
| log<level::DEBUG>(e.what()); |
| return std::make_tuple(response, numInstances); |
| } |
| |
| response.instance = instance; |
| uint8_t temp{}; |
| bool sign{}; |
| std::tie(temp, sign) = readTemp(service, path); |
| response.temperature = temp; |
| response.sign = sign; |
| |
| // Found the instance we're interested in |
| break; |
| } |
| |
| if (numInstances > maxInstances) |
| { |
| numInstances = maxInstances; |
| } |
| return std::make_tuple(response, numInstances); |
| } |
| |
| std::tuple<ResponseList, NumInstances> readAll(const std::string& type, |
| uint8_t instanceStart) |
| { |
| ResponseList response{}; |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| size_t numInstances = 0; |
| auto data = parseJSONConfig(gDCMISensorsConfig); |
| static const std::vector<Json> empty{}; |
| std::vector<Json> readings = data.value(type, empty); |
| numInstances = readings.size(); |
| for (const auto& j : readings) |
| { |
| try |
| { |
| // Max of 8 response data sets |
| if (response.size() == maxDataSets) |
| { |
| break; |
| } |
| |
| uint8_t instanceNum = j.value("instance", 0); |
| // Not in the instance range we're interested in |
| if (instanceNum < instanceStart) |
| { |
| continue; |
| } |
| |
| std::string path = j.value("dbus", ""); |
| auto service = |
| ipmi::getService(bus, "xyz.openbmc_project.Sensor.Value", path); |
| |
| Response r{}; |
| r.instance = instanceNum; |
| uint8_t temp{}; |
| bool sign{}; |
| std::tie(temp, sign) = readTemp(service, path); |
| r.temperature = temp; |
| r.sign = sign; |
| response.push_back(r); |
| } |
| catch (std::exception& e) |
| { |
| log<level::DEBUG>(e.what()); |
| continue; |
| } |
| } |
| |
| if (numInstances > maxInstances) |
| { |
| numInstances = maxInstances; |
| } |
| return std::make_tuple(response, numInstances); |
| } |
| |
| } // namespace temp_readings |
| } // namespace dcmi |
| |
| ipmi_ret_t getTempReadings(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::GetTempReadingsRequest*>(request); |
| auto responseData = |
| reinterpret_cast<dcmi::GetTempReadingsResponseHdr*>(response); |
| |
| if (*data_len != sizeof(dcmi::GetTempReadingsRequest)) |
| { |
| log<level::ERR>("Malformed request data", |
| entry("DATA_SIZE=%d", *data_len)); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| *data_len = 0; |
| |
| auto it = dcmi::entityIdToName.find(requestData->entityId); |
| if (it == dcmi::entityIdToName.end()) |
| { |
| log<level::ERR>("Unknown Entity ID", |
| entry("ENTITY_ID=%d", requestData->entityId)); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| if (requestData->sensorType != dcmi::temperatureSensorType) |
| { |
| log<level::ERR>("Invalid sensor type", |
| entry("SENSOR_TYPE=%d", requestData->sensorType)); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| dcmi::temp_readings::ResponseList temps{}; |
| try |
| { |
| if (!requestData->entityInstance) |
| { |
| // Read all instances |
| std::tie(temps, responseData->numInstances) = |
| dcmi::temp_readings::readAll(it->second, |
| requestData->instanceStart); |
| } |
| else |
| { |
| // Read one instance |
| temps.resize(1); |
| std::tie(temps[0], responseData->numInstances) = |
| dcmi::temp_readings::read(it->second, |
| requestData->entityInstance); |
| } |
| responseData->numDataSets = temps.size(); |
| } |
| catch (InternalFailure& e) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| size_t payloadSize = temps.size() * sizeof(dcmi::temp_readings::Response); |
| if (!temps.empty()) |
| { |
| memcpy(responseData + 1, // copy payload right after the response header |
| temps.data(), payloadSize); |
| } |
| *data_len = sizeof(dcmi::GetTempReadingsResponseHdr) + payloadSize; |
| |
| return IPMI_CC_OK; |
| } |
| |
| int64_t getPowerReading(sdbusplus::bus::bus& bus) |
| { |
| std::ifstream sensorFile(POWER_READING_SENSOR); |
| std::string objectPath; |
| if (!sensorFile.is_open()) |
| { |
| log<level::ERR>("Power reading configuration file not found", |
| entry("POWER_SENSOR_FILE=%s", POWER_READING_SENSOR)); |
| elog<InternalFailure>(); |
| } |
| |
| auto data = nlohmann::json::parse(sensorFile, nullptr, false); |
| if (data.is_discarded()) |
| { |
| log<level::ERR>("Error in parsing configuration file", |
| entry("POWER_SENSOR_FILE=%s", POWER_READING_SENSOR)); |
| elog<InternalFailure>(); |
| } |
| |
| objectPath = data.value("path", ""); |
| if (objectPath.empty()) |
| { |
| log<level::ERR>("Power sensor D-Bus object path is empty", |
| entry("POWER_SENSOR_FILE=%s", POWER_READING_SENSOR)); |
| elog<InternalFailure>(); |
| } |
| |
| // Return default value if failed to read from D-Bus object |
| int64_t power = 0; |
| try |
| { |
| auto service = ipmi::getService(bus, SENSOR_VALUE_INTF, objectPath); |
| |
| // Read the sensor value and scale properties |
| auto properties = ipmi::getAllDbusProperties(bus, service, objectPath, |
| SENSOR_VALUE_INTF); |
| auto value = std::get<int64_t>(properties[SENSOR_VALUE_PROP]); |
| auto scale = std::get<int64_t>(properties[SENSOR_SCALE_PROP]); |
| |
| // Power reading needs to be scaled with the Scale value using the |
| // formula Value * 10^Scale. |
| power = value * std::pow(10, scale); |
| } |
| catch (std::exception& e) |
| { |
| log<level::INFO>("Failure to read power value from D-Bus object", |
| entry("OBJECT_PATH=%s", objectPath.c_str()), |
| entry("INTERFACE=%s", SENSOR_VALUE_INTF)); |
| } |
| return power; |
| } |
| |
| ipmi_ret_t setDCMIConfParams(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::SetConfParamsRequest*>(request); |
| |
| if (*data_len < DCMI_SET_CONF_PARAM_REQ_PACKET_MIN_SIZE || |
| *data_len > DCMI_SET_CONF_PARAM_REQ_PACKET_MAX_SIZE) |
| { |
| log<level::ERR>("Invalid Requested Packet size", |
| entry("PACKET SIZE=%d", *data_len)); |
| *data_len = 0; |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| *data_len = 0; |
| |
| try |
| { |
| // Take action based on the Parameter Selector |
| switch ( |
| static_cast<dcmi::DCMIConfigParameters>(requestData->paramSelect)) |
| { |
| case dcmi::DCMIConfigParameters::ActivateDHCP: |
| |
| if ((requestData->data[0] & DCMI_ACTIVATE_DHCP_MASK) && |
| dcmi::getDHCPEnabled()) |
| { |
| // When these conditions are met we have to trigger DHCP |
| // protocol restart using the latest parameter settings, but |
| // as per n/w manager design, each time when we update n/w |
| // parameters, n/w service is restarted. So we no need to |
| // take any action in this case. |
| } |
| break; |
| |
| case dcmi::DCMIConfigParameters::DiscoveryConfig: |
| |
| if (requestData->data[0] & DCMI_OPTION_12_MASK) |
| { |
| dcmi::setDHCPOption(DHCP_OPT12_ENABLED, true); |
| } |
| else |
| { |
| dcmi::setDHCPOption(DHCP_OPT12_ENABLED, false); |
| } |
| |
| // Systemd-networkd doesn't support Random Back off |
| if (requestData->data[0] & DCMI_RAND_BACK_OFF_MASK) |
| { |
| return IPMI_CC_INVALID; |
| } |
| break; |
| // Systemd-networkd doesn't allow to configure DHCP timigs |
| case dcmi::DCMIConfigParameters::DHCPTiming1: |
| case dcmi::DCMIConfigParameters::DHCPTiming2: |
| case dcmi::DCMIConfigParameters::DHCPTiming3: |
| default: |
| return IPMI_CC_INVALID; |
| } |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>(e.what()); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t getDCMIConfParams(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| |
| auto requestData = |
| reinterpret_cast<const dcmi::GetConfParamsRequest*>(request); |
| auto responseData = |
| reinterpret_cast<dcmi::GetConfParamsResponse*>(response); |
| |
| responseData->data[0] = 0x00; |
| |
| if (*data_len != sizeof(dcmi::GetConfParamsRequest)) |
| { |
| log<level::ERR>("Invalid Requested Packet size", |
| entry("PACKET SIZE=%d", *data_len)); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| *data_len = 0; |
| |
| try |
| { |
| // Take action based on the Parameter Selector |
| switch ( |
| static_cast<dcmi::DCMIConfigParameters>(requestData->paramSelect)) |
| { |
| case dcmi::DCMIConfigParameters::ActivateDHCP: |
| responseData->data[0] = DCMI_ACTIVATE_DHCP_REPLY; |
| *data_len = sizeof(dcmi::GetConfParamsResponse) + 1; |
| break; |
| case dcmi::DCMIConfigParameters::DiscoveryConfig: |
| if (dcmi::getDHCPOption(DHCP_OPT12_ENABLED)) |
| { |
| responseData->data[0] |= DCMI_OPTION_12_MASK; |
| } |
| *data_len = sizeof(dcmi::GetConfParamsResponse) + 1; |
| break; |
| // Get below values from Systemd-networkd source code |
| case dcmi::DCMIConfigParameters::DHCPTiming1: |
| responseData->data[0] = DHCP_TIMING1; |
| *data_len = sizeof(dcmi::GetConfParamsResponse) + 1; |
| break; |
| case dcmi::DCMIConfigParameters::DHCPTiming2: |
| responseData->data[0] = DHCP_TIMING2_LOWER; |
| responseData->data[1] = DHCP_TIMING2_UPPER; |
| *data_len = sizeof(dcmi::GetConfParamsResponse) + 2; |
| break; |
| case dcmi::DCMIConfigParameters::DHCPTiming3: |
| responseData->data[0] = DHCP_TIMING3_LOWER; |
| responseData->data[1] = DHCP_TIMING3_UPPER; |
| *data_len = sizeof(dcmi::GetConfParamsResponse) + 2; |
| break; |
| default: |
| *data_len = 0; |
| return IPMI_CC_INVALID; |
| } |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>(e.what()); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| responseData->major = DCMI_SPEC_MAJOR_VERSION; |
| responseData->minor = DCMI_SPEC_MINOR_VERSION; |
| responseData->paramRevision = DCMI_CONFIG_PARAMETER_REVISION; |
| |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t getPowerReading(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| if (!dcmi::isDCMIPowerMgmtSupported()) |
| { |
| *data_len = 0; |
| log<level::ERR>("DCMI Power management is unsupported!"); |
| return IPMI_CC_INVALID; |
| } |
| |
| ipmi_ret_t rc = IPMI_CC_OK; |
| auto responseData = |
| reinterpret_cast<dcmi::GetPowerReadingResponse*>(response); |
| |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| int64_t power = 0; |
| try |
| { |
| power = getPowerReading(bus); |
| } |
| catch (InternalFailure& e) |
| { |
| log<level::ERR>("Error in reading power sensor value", |
| entry("INTERFACE=%s", SENSOR_VALUE_INTF), |
| entry("PROPERTY=%s", SENSOR_VALUE_PROP)); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| // TODO: openbmc/openbmc#2819 |
| // Minimum, Maximum, Average power, TimeFrame, TimeStamp, |
| // PowerReadingState readings need to be populated |
| // after Telemetry changes. |
| uint16_t totalPower = static_cast<uint16_t>(power); |
| responseData->currentPower = totalPower; |
| responseData->minimumPower = totalPower; |
| responseData->maximumPower = totalPower; |
| responseData->averagePower = totalPower; |
| |
| *data_len = sizeof(*responseData); |
| return rc; |
| } |
| |
| namespace dcmi |
| { |
| namespace sensor_info |
| { |
| |
| Response createFromJson(const Json& config) |
| { |
| Response response{}; |
| uint16_t recordId = config.value("record_id", 0); |
| response.recordIdLsb = recordId & 0xFF; |
| response.recordIdMsb = (recordId >> 8) & 0xFF; |
| return response; |
| } |
| |
| std::tuple<Response, NumInstances> read(const std::string& type, |
| uint8_t instance, const Json& config) |
| { |
| Response response{}; |
| |
| if (!instance) |
| { |
| log<level::ERR>("Expected non-zero instance"); |
| elog<InternalFailure>(); |
| } |
| |
| static const std::vector<Json> empty{}; |
| std::vector<Json> readings = config.value(type, empty); |
| size_t numInstances = readings.size(); |
| for (const auto& reading : readings) |
| { |
| uint8_t instanceNum = reading.value("instance", 0); |
| // Not the instance we're interested in |
| if (instanceNum != instance) |
| { |
| continue; |
| } |
| |
| response = createFromJson(reading); |
| |
| // Found the instance we're interested in |
| break; |
| } |
| |
| if (numInstances > maxInstances) |
| { |
| log<level::DEBUG>("Trimming IPMI num instances", |
| entry("NUM_INSTANCES=%d", numInstances)); |
| numInstances = maxInstances; |
| } |
| return std::make_tuple(response, numInstances); |
| } |
| |
| std::tuple<ResponseList, NumInstances> |
| readAll(const std::string& type, uint8_t instanceStart, const Json& config) |
| { |
| ResponseList responses{}; |
| |
| size_t numInstances = 0; |
| static const std::vector<Json> empty{}; |
| std::vector<Json> readings = config.value(type, empty); |
| numInstances = readings.size(); |
| for (const auto& reading : readings) |
| { |
| try |
| { |
| // Max of 8 records |
| if (responses.size() == maxRecords) |
| { |
| break; |
| } |
| |
| uint8_t instanceNum = reading.value("instance", 0); |
| // Not in the instance range we're interested in |
| if (instanceNum < instanceStart) |
| { |
| continue; |
| } |
| |
| Response response = createFromJson(reading); |
| responses.push_back(response); |
| } |
| catch (std::exception& e) |
| { |
| log<level::DEBUG>(e.what()); |
| continue; |
| } |
| } |
| |
| if (numInstances > maxInstances) |
| { |
| log<level::DEBUG>("Trimming IPMI num instances", |
| entry("NUM_INSTANCES=%d", numInstances)); |
| numInstances = maxInstances; |
| } |
| return std::make_tuple(responses, numInstances); |
| } |
| |
| } // namespace sensor_info |
| } // namespace dcmi |
| |
| ipmi_ret_t getSensorInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| auto requestData = |
| reinterpret_cast<const dcmi::GetSensorInfoRequest*>(request); |
| auto responseData = |
| reinterpret_cast<dcmi::GetSensorInfoResponseHdr*>(response); |
| |
| if (*data_len != sizeof(dcmi::GetSensorInfoRequest)) |
| { |
| log<level::ERR>("Malformed request data", |
| entry("DATA_SIZE=%d", *data_len)); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| *data_len = 0; |
| |
| auto it = dcmi::entityIdToName.find(requestData->entityId); |
| if (it == dcmi::entityIdToName.end()) |
| { |
| log<level::ERR>("Unknown Entity ID", |
| entry("ENTITY_ID=%d", requestData->entityId)); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| if (requestData->sensorType != dcmi::temperatureSensorType) |
| { |
| log<level::ERR>("Invalid sensor type", |
| entry("SENSOR_TYPE=%d", requestData->sensorType)); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| dcmi::sensor_info::ResponseList sensors{}; |
| static dcmi::Json config{}; |
| static bool parsed = false; |
| |
| try |
| { |
| if (!parsed) |
| { |
| config = dcmi::parseJSONConfig(dcmi::gDCMISensorsConfig); |
| parsed = true; |
| } |
| |
| if (!requestData->entityInstance) |
| { |
| // Read all instances |
| std::tie(sensors, responseData->numInstances) = |
| dcmi::sensor_info::readAll(it->second, |
| requestData->instanceStart, config); |
| } |
| else |
| { |
| // Read one instance |
| sensors.resize(1); |
| std::tie(sensors[0], responseData->numInstances) = |
| dcmi::sensor_info::read(it->second, requestData->entityInstance, |
| config); |
| } |
| responseData->numRecords = sensors.size(); |
| } |
| catch (InternalFailure& e) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| size_t payloadSize = sensors.size() * sizeof(dcmi::sensor_info::Response); |
| if (!sensors.empty()) |
| { |
| memcpy(responseData + 1, // copy payload right after the response header |
| sensors.data(), payloadSize); |
| } |
| *data_len = sizeof(dcmi::GetSensorInfoResponseHdr) + payloadSize; |
| |
| return IPMI_CC_OK; |
| } |
| |
| void register_netfn_dcmi_functions() |
| { |
| // <Get Power Limit> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_POWER_LIMIT, NULL, |
| getPowerLimit, PRIVILEGE_USER); |
| |
| // <Set Power Limit> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::SET_POWER_LIMIT, NULL, |
| setPowerLimit, PRIVILEGE_OPERATOR); |
| |
| // <Activate/Deactivate Power Limit> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::APPLY_POWER_LIMIT, |
| NULL, applyPowerLimit, PRIVILEGE_OPERATOR); |
| |
| // <Get Asset Tag> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_ASSET_TAG, NULL, |
| getAssetTag, PRIVILEGE_USER); |
| |
| // <Set Asset Tag> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::SET_ASSET_TAG, NULL, |
| setAssetTag, PRIVILEGE_OPERATOR); |
| |
| // <Get Management Controller Identifier String> |
| |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_MGMNT_CTRL_ID_STR, |
| NULL, getMgmntCtrlIdStr, PRIVILEGE_USER); |
| |
| // <Set Management Controller Identifier String> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::SET_MGMNT_CTRL_ID_STR, |
| NULL, setMgmntCtrlIdStr, PRIVILEGE_ADMIN); |
| |
| // <Get DCMI capabilities> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_CAPABILITIES, |
| NULL, getDCMICapabilities, PRIVILEGE_USER); |
| |
| // <Get Temperature Readings> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_TEMP_READINGS, |
| NULL, getTempReadings, PRIVILEGE_USER); |
| |
| // <Get Power Reading> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_POWER_READING, |
| NULL, getPowerReading, PRIVILEGE_USER); |
| |
| // <Get Sensor Info> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_SENSOR_INFO, NULL, |
| getSensorInfo, PRIVILEGE_USER); |
| |
| // <Get DCMI Configuration Parameters> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::GET_CONF_PARAMS, NULL, |
| getDCMIConfParams, PRIVILEGE_USER); |
| |
| // <Set DCMI Configuration Parameters> |
| ipmi_register_callback(NETFUN_GRPEXT, dcmi::Commands::SET_CONF_PARAMS, NULL, |
| setDCMIConfParams, PRIVILEGE_ADMIN); |
| |
| return; |
| } |
| // 956379 |