| #include "config.h" |
| |
| #include "chassishandler.hpp" |
| |
| #include <arpa/inet.h> |
| #include <endian.h> |
| #include <limits.h> |
| #include <mapper.h> |
| #include <netinet/in.h> |
| |
| #include <array> |
| #include <chrono> |
| #include <cstring> |
| #include <filesystem> |
| #include <fstream> |
| #include <future> |
| #include <ipmid/api.hpp> |
| #include <ipmid/types.hpp> |
| #include <ipmid/utils.hpp> |
| #include <map> |
| #include <phosphor-logging/elog-errors.hpp> |
| #include <phosphor-logging/log.hpp> |
| #include <sdbusplus/bus.hpp> |
| #include <sdbusplus/message/types.hpp> |
| #include <sdbusplus/server/object.hpp> |
| #include <sdbusplus/timer.hpp> |
| #include <settings.hpp> |
| #include <sstream> |
| #include <string> |
| #include <xyz/openbmc_project/Common/error.hpp> |
| #include <xyz/openbmc_project/Control/Boot/Mode/server.hpp> |
| #include <xyz/openbmc_project/Control/Boot/Source/server.hpp> |
| #include <xyz/openbmc_project/Control/Power/RestorePolicy/server.hpp> |
| #include <xyz/openbmc_project/State/Host/server.hpp> |
| #include <xyz/openbmc_project/State/PowerOnHours/server.hpp> |
| |
| // Defines |
| #define SET_PARM_VERSION 0x01 |
| #define SET_PARM_BOOT_FLAGS_PERMANENT 0x40 |
| #define SET_PARM_BOOT_FLAGS_VALID_ONE_TIME 0x80 |
| #define SET_PARM_BOOT_FLAGS_VALID_PERMANENT 0xC0 |
| |
| std::unique_ptr<phosphor::Timer> identifyTimer |
| __attribute__((init_priority(101))); |
| |
| static ChassisIDState chassisIDState = ChassisIDState::reserved; |
| |
| constexpr size_t SIZE_MAC = 18; |
| constexpr size_t SIZE_BOOT_OPTION = (uint8_t) |
| BootOptionResponseSize::OPAL_NETWORK_SETTINGS; // Maximum size of the boot |
| // option parametrs |
| constexpr size_t SIZE_PREFIX = 7; |
| constexpr size_t MAX_PREFIX_VALUE = 32; |
| constexpr size_t SIZE_COOKIE = 4; |
| constexpr size_t SIZE_VERSION = 2; |
| constexpr size_t DEFAULT_IDENTIFY_TIME_OUT = 15; |
| |
| // PetiBoot-Specific |
| static constexpr uint8_t net_conf_initial_bytes[] = {0x80, 0x21, 0x70, 0x62, |
| 0x21, 0x00, 0x01, 0x06}; |
| |
| static constexpr size_t COOKIE_OFFSET = 1; |
| static constexpr size_t VERSION_OFFSET = 5; |
| static constexpr size_t ADDR_SIZE_OFFSET = 8; |
| static constexpr size_t MAC_OFFSET = 9; |
| static constexpr size_t ADDRTYPE_OFFSET = 16; |
| static constexpr size_t IPADDR_OFFSET = 17; |
| |
| static constexpr size_t encIdentifyObjectsSize = 1; |
| static constexpr size_t chassisIdentifyReqLength = 2; |
| static constexpr size_t identifyIntervalPos = 0; |
| static constexpr size_t forceIdentifyPos = 1; |
| |
| void register_netfn_chassis_functions() __attribute__((constructor)); |
| |
| // Host settings in dbus |
| // Service name should be referenced by connection name got via object mapper |
| const char* settings_object_name = "/org/openbmc/settings/host0"; |
| const char* settings_intf_name = "org.freedesktop.DBus.Properties"; |
| const char* identify_led_object_name = |
| "/xyz/openbmc_project/led/groups/enclosure_identify"; |
| |
| constexpr auto SETTINGS_ROOT = "/"; |
| constexpr auto SETTINGS_MATCH = "host0"; |
| |
| constexpr auto IP_INTERFACE = "xyz.openbmc_project.Network.IP"; |
| constexpr auto MAC_INTERFACE = "xyz.openbmc_project.Network.MACAddress"; |
| |
| static constexpr auto chassisStateRoot = "/xyz/openbmc_project/state"; |
| static constexpr auto chassisPOHStateIntf = |
| "xyz.openbmc_project.State.PowerOnHours"; |
| static constexpr auto pOHCounterProperty = "POHCounter"; |
| static constexpr auto match = "chassis0"; |
| const static constexpr char chassisCapIntf[] = |
| "xyz.openbmc_project.Control.ChassisCapabilities"; |
| const static constexpr char chassisCapFlagsProp[] = "CapabilitiesFlags"; |
| const static constexpr char chassisFRUDevAddrProp[] = "FRUDeviceAddress"; |
| const static constexpr char chassisSDRDevAddrProp[] = "SDRDeviceAddress"; |
| const static constexpr char chassisSELDevAddrProp[] = "SELDeviceAddress"; |
| const static constexpr char chassisSMDevAddrProp[] = "SMDeviceAddress"; |
| const static constexpr char chassisBridgeDevAddrProp[] = "BridgeDeviceAddress"; |
| static constexpr uint8_t chassisCapFlagMask = 0x0f; |
| static constexpr uint8_t chassisCapAddrMask = 0xfe; |
| static constexpr const char* powerButtonIntf = |
| "xyz.openbmc_project.Chassis.Buttons.Power"; |
| static constexpr const char* powerButtonPath = |
| "/xyz/openbmc_project/Chassis/Buttons/Power0"; |
| static constexpr const char* resetButtonIntf = |
| "xyz.openbmc_project.Chassis.Buttons.Reset"; |
| static constexpr const char* resetButtonPath = |
| "/xyz/openbmc_project/Chassis/Buttons/Reset0"; |
| |
| // Phosphor Host State manager |
| namespace State = sdbusplus::xyz::openbmc_project::State::server; |
| |
| namespace fs = std::filesystem; |
| |
| using namespace phosphor::logging; |
| using namespace sdbusplus::xyz::openbmc_project::Common::Error; |
| using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server; |
| |
| namespace chassis |
| { |
| namespace internal |
| { |
| |
| constexpr auto bootModeIntf = "xyz.openbmc_project.Control.Boot.Mode"; |
| constexpr auto bootSourceIntf = "xyz.openbmc_project.Control.Boot.Source"; |
| constexpr auto powerRestoreIntf = |
| "xyz.openbmc_project.Control.Power.RestorePolicy"; |
| sdbusplus::bus::bus dbus(ipmid_get_sd_bus_connection()); |
| |
| namespace cache |
| { |
| |
| std::unique_ptr<settings::Objects> objectsPtr = nullptr; |
| |
| settings::Objects& getObjects() |
| { |
| if (objectsPtr == nullptr) |
| { |
| objectsPtr = std::make_unique<settings::Objects>( |
| dbus, std::vector<std::string>{bootModeIntf, bootSourceIntf, |
| powerRestoreIntf}); |
| } |
| return *objectsPtr; |
| } |
| |
| } // namespace cache |
| } // namespace internal |
| } // namespace chassis |
| |
| namespace poh |
| { |
| |
| constexpr auto minutesPerCount = 60; |
| |
| } // namespace poh |
| |
| struct get_sys_boot_options_t |
| { |
| uint8_t parameter; |
| uint8_t set; |
| uint8_t block; |
| } __attribute__((packed)); |
| |
| struct get_sys_boot_options_response_t |
| { |
| uint8_t version; |
| uint8_t parm; |
| uint8_t data[SIZE_BOOT_OPTION]; |
| } __attribute__((packed)); |
| |
| struct set_sys_boot_options_t |
| { |
| uint8_t parameter; |
| uint8_t data[SIZE_BOOT_OPTION]; |
| } __attribute__((packed)); |
| |
| int getHostNetworkData(get_sys_boot_options_response_t* respptr) |
| { |
| ipmi::PropertyMap properties; |
| int rc = 0; |
| uint8_t addrSize = ipmi::network::IPV4_ADDRESS_SIZE_BYTE; |
| |
| try |
| { |
| // TODO There may be cases where an interface is implemented by multiple |
| // objects,to handle such cases we are interested on that object |
| // which are on interested busname. |
| // Currenlty mapper doesn't give the readable busname(gives busid) |
| // so we can't match with bus name so giving some object specific info |
| // as SETTINGS_MATCH. |
| // Later SETTINGS_MATCH will be replaced with busname. |
| |
| sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection()); |
| |
| auto ipObjectInfo = ipmi::getDbusObject(bus, IP_INTERFACE, |
| SETTINGS_ROOT, SETTINGS_MATCH); |
| |
| auto macObjectInfo = ipmi::getDbusObject(bus, MAC_INTERFACE, |
| SETTINGS_ROOT, SETTINGS_MATCH); |
| |
| properties = ipmi::getAllDbusProperties( |
| bus, ipObjectInfo.second, ipObjectInfo.first, IP_INTERFACE); |
| auto variant = ipmi::getDbusProperty(bus, macObjectInfo.second, |
| macObjectInfo.first, MAC_INTERFACE, |
| "MACAddress"); |
| |
| auto ipAddress = std::get<std::string>(properties["Address"]); |
| |
| auto gateway = std::get<std::string>(properties["Gateway"]); |
| |
| auto prefix = std::get<uint8_t>(properties["PrefixLength"]); |
| |
| uint8_t isStatic = |
| (std::get<std::string>(properties["Origin"]) == |
| "xyz.openbmc_project.Network.IP.AddressOrigin.Static") |
| ? 1 |
| : 0; |
| |
| auto MACAddress = std::get<std::string>(variant); |
| |
| // it is expected here that we should get the valid data |
| // but we may also get the default values. |
| // Validation of the data is done by settings. |
| // |
| // if mac address is default mac address then |
| // don't send blank override. |
| if ((MACAddress == ipmi::network::DEFAULT_MAC_ADDRESS)) |
| { |
| std::memset(respptr->data, 0, SIZE_BOOT_OPTION); |
| rc = -1; |
| return rc; |
| } |
| // if addr is static then ipaddress,gateway,prefix |
| // should not be default one,don't send blank override. |
| if (isStatic) |
| { |
| if ((ipAddress == ipmi::network::DEFAULT_ADDRESS) || |
| (gateway == ipmi::network::DEFAULT_ADDRESS) || (!prefix)) |
| { |
| std::memset(respptr->data, 0, SIZE_BOOT_OPTION); |
| rc = -1; |
| return rc; |
| } |
| } |
| |
| sscanf( |
| MACAddress.c_str(), ipmi::network::MAC_ADDRESS_FORMAT, |
| (respptr->data + MAC_OFFSET), (respptr->data + MAC_OFFSET + 1), |
| (respptr->data + MAC_OFFSET + 2), (respptr->data + MAC_OFFSET + 3), |
| (respptr->data + MAC_OFFSET + 4), (respptr->data + MAC_OFFSET + 5)); |
| |
| respptr->data[MAC_OFFSET + 6] = 0x00; |
| |
| std::memcpy(respptr->data + ADDRTYPE_OFFSET, &isStatic, |
| sizeof(isStatic)); |
| |
| uint8_t addressFamily = (std::get<std::string>(properties["Type"]) == |
| "xyz.openbmc_project.Network.IP.Protocol.IPv4") |
| ? AF_INET |
| : AF_INET6; |
| |
| addrSize = (addressFamily == AF_INET) |
| ? ipmi::network::IPV4_ADDRESS_SIZE_BYTE |
| : ipmi::network::IPV6_ADDRESS_SIZE_BYTE; |
| |
| // ipaddress and gateway would be in IPv4 format |
| inet_pton(addressFamily, ipAddress.c_str(), |
| (respptr->data + IPADDR_OFFSET)); |
| |
| uint8_t prefixOffset = IPADDR_OFFSET + addrSize; |
| |
| std::memcpy(respptr->data + prefixOffset, &prefix, sizeof(prefix)); |
| |
| uint8_t gatewayOffset = prefixOffset + sizeof(decltype(prefix)); |
| |
| inet_pton(addressFamily, gateway.c_str(), |
| (respptr->data + gatewayOffset)); |
| } |
| catch (InternalFailure& e) |
| { |
| commit<InternalFailure>(); |
| std::memset(respptr->data, 0, SIZE_BOOT_OPTION); |
| rc = -1; |
| return rc; |
| } |
| |
| // PetiBoot-Specific |
| // If success then copy the first 9 bytes to the data |
| std::memcpy(respptr->data, net_conf_initial_bytes, |
| sizeof(net_conf_initial_bytes)); |
| |
| std::memcpy(respptr->data + ADDR_SIZE_OFFSET, &addrSize, sizeof(addrSize)); |
| |
| #ifdef _IPMI_DEBUG_ |
| std::printf("\n===Printing the IPMI Formatted Data========\n"); |
| |
| for (uint8_t pos = 0; pos < index; pos++) |
| { |
| std::printf("%02x ", respptr->data[pos]); |
| } |
| #endif |
| |
| return rc; |
| } |
| |
| /** @brief convert IPv4 and IPv6 addresses from binary to text form. |
| * @param[in] family - IPv4/Ipv6 |
| * @param[in] data - req data pointer. |
| * @param[in] offset - offset in the data. |
| * @param[in] addrSize - size of the data which needs to be read from offset. |
| * @returns address in text form. |
| */ |
| |
| std::string getAddrStr(uint8_t family, uint8_t* data, uint8_t offset, |
| uint8_t addrSize) |
| { |
| char ipAddr[INET6_ADDRSTRLEN] = {}; |
| |
| switch (family) |
| { |
| case AF_INET: |
| { |
| struct sockaddr_in addr4 |
| { |
| }; |
| std::memcpy(&addr4.sin_addr.s_addr, &data[offset], addrSize); |
| |
| inet_ntop(AF_INET, &addr4.sin_addr, ipAddr, INET_ADDRSTRLEN); |
| |
| break; |
| } |
| case AF_INET6: |
| { |
| struct sockaddr_in6 addr6 |
| { |
| }; |
| std::memcpy(&addr6.sin6_addr.s6_addr, &data[offset], addrSize); |
| |
| inet_ntop(AF_INET6, &addr6.sin6_addr, ipAddr, INET6_ADDRSTRLEN); |
| |
| break; |
| } |
| default: |
| { |
| return {}; |
| } |
| } |
| |
| return ipAddr; |
| } |
| |
| int setHostNetworkData(set_sys_boot_options_t* reqptr) |
| { |
| using namespace std::string_literals; |
| std::string host_network_config; |
| char mac[]{"00:00:00:00:00:00"}; |
| std::string ipAddress, gateway; |
| char addrOrigin{0}; |
| uint8_t addrSize{0}; |
| std::string addressOrigin = |
| "xyz.openbmc_project.Network.IP.AddressOrigin.DHCP"; |
| std::string addressType = "xyz.openbmc_project.Network.IP.Protocol.IPv4"; |
| uint8_t prefix{0}; |
| uint32_t zeroCookie = 0; |
| uint8_t family = AF_INET; |
| |
| // cookie starts from second byte |
| // version starts from sixth byte |
| |
| try |
| { |
| do |
| { |
| // cookie == 0x21 0x70 0x62 0x21 |
| if (memcmp(&(reqptr->data[COOKIE_OFFSET]), |
| (net_conf_initial_bytes + COOKIE_OFFSET), |
| SIZE_COOKIE) != 0) |
| { |
| // cookie == 0 |
| if (memcmp(&(reqptr->data[COOKIE_OFFSET]), &zeroCookie, |
| SIZE_COOKIE) == 0) |
| { |
| // need to zero out the network settings. |
| break; |
| } |
| |
| log<level::ERR>("Invalid Cookie"); |
| elog<InternalFailure>(); |
| } |
| |
| // vesion == 0x00 0x01 |
| if (memcmp(&(reqptr->data[VERSION_OFFSET]), |
| (net_conf_initial_bytes + VERSION_OFFSET), |
| SIZE_VERSION) != 0) |
| { |
| |
| log<level::ERR>("Invalid Version"); |
| elog<InternalFailure>(); |
| } |
| |
| std::snprintf( |
| mac, SIZE_MAC, ipmi::network::MAC_ADDRESS_FORMAT, |
| reqptr->data[MAC_OFFSET], reqptr->data[MAC_OFFSET + 1], |
| reqptr->data[MAC_OFFSET + 2], reqptr->data[MAC_OFFSET + 3], |
| reqptr->data[MAC_OFFSET + 4], reqptr->data[MAC_OFFSET + 5]); |
| |
| std::memcpy(&addrOrigin, &(reqptr->data[ADDRTYPE_OFFSET]), |
| sizeof(decltype(addrOrigin))); |
| |
| if (addrOrigin) |
| { |
| addressOrigin = |
| "xyz.openbmc_project.Network.IP.AddressOrigin.Static"; |
| } |
| |
| // Get the address size |
| std::memcpy(&addrSize, &reqptr->data[ADDR_SIZE_OFFSET], |
| sizeof(addrSize)); |
| |
| uint8_t prefixOffset = IPADDR_OFFSET + addrSize; |
| |
| std::memcpy(&prefix, &(reqptr->data[prefixOffset]), |
| sizeof(decltype(prefix))); |
| |
| uint8_t gatewayOffset = prefixOffset + sizeof(decltype(prefix)); |
| |
| if (addrSize != ipmi::network::IPV4_ADDRESS_SIZE_BYTE) |
| { |
| addressType = "xyz.openbmc_project.Network.IP.Protocol.IPv6"; |
| family = AF_INET6; |
| } |
| |
| ipAddress = |
| getAddrStr(family, reqptr->data, IPADDR_OFFSET, addrSize); |
| |
| gateway = getAddrStr(family, reqptr->data, gatewayOffset, addrSize); |
| |
| } while (0); |
| |
| // Cookie == 0 or it is a valid cookie |
| host_network_config += "ipaddress="s + ipAddress + ",prefix="s + |
| std::to_string(prefix) + ",gateway="s + gateway + |
| ",mac="s + mac + ",addressOrigin="s + |
| addressOrigin; |
| |
| sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection()); |
| |
| auto ipObjectInfo = ipmi::getDbusObject(bus, IP_INTERFACE, |
| SETTINGS_ROOT, SETTINGS_MATCH); |
| auto macObjectInfo = ipmi::getDbusObject(bus, MAC_INTERFACE, |
| SETTINGS_ROOT, SETTINGS_MATCH); |
| // set the dbus property |
| ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first, |
| IP_INTERFACE, "Address", std::string(ipAddress)); |
| ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first, |
| IP_INTERFACE, "PrefixLength", prefix); |
| ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first, |
| IP_INTERFACE, "Origin", addressOrigin); |
| ipmi::setDbusProperty(bus, ipObjectInfo.second, ipObjectInfo.first, |
| IP_INTERFACE, "Gateway", std::string(gateway)); |
| ipmi::setDbusProperty( |
| bus, ipObjectInfo.second, ipObjectInfo.first, IP_INTERFACE, "Type", |
| std::string("xyz.openbmc_project.Network.IP.Protocol.IPv4")); |
| ipmi::setDbusProperty(bus, macObjectInfo.second, macObjectInfo.first, |
| MAC_INTERFACE, "MACAddress", std::string(mac)); |
| |
| log<level::DEBUG>( |
| "Network configuration changed", |
| entry("NETWORKCONFIG=%s", host_network_config.c_str())); |
| } |
| catch (InternalFailure& e) |
| { |
| commit<InternalFailure>(); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| uint32_t getPOHCounter() |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| auto chassisStateObj = |
| ipmi::getDbusObject(bus, chassisPOHStateIntf, chassisStateRoot, match); |
| |
| auto service = |
| ipmi::getService(bus, chassisPOHStateIntf, chassisStateObj.first); |
| |
| auto propValue = |
| ipmi::getDbusProperty(bus, service, chassisStateObj.first, |
| chassisPOHStateIntf, pOHCounterProperty); |
| |
| return std::get<uint32_t>(propValue); |
| } |
| |
| ipmi_ret_t ipmi_chassis_wildcard(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| // Status code. |
| ipmi_ret_t rc = IPMI_CC_INVALID; |
| *data_len = 0; |
| return rc; |
| } |
| |
| /** @brief Implements the get chassis capabilities command |
| * |
| * @returns IPMI completion code plus response data |
| * chassisCapFlags - chassis capability flag |
| * chassisFRUInfoDevAddr - chassis FRU info Device Address |
| * chassisSDRDevAddr - chassis SDR device address |
| * chassisSELDevAddr - chassis SEL device address |
| * chassisSMDevAddr - chassis system management device address |
| * chassisBridgeDevAddr - chassis bridge device address |
| */ |
| ipmi::RspType<uint8_t, // chassis capabilities flag |
| uint8_t, // chassis FRU info Device Address |
| uint8_t, // chassis SDR device address |
| uint8_t, // chassis SEL device address |
| uint8_t, // chassis system management device address |
| uint8_t // chassis bridge device address |
| > |
| ipmiGetChassisCap() |
| { |
| ipmi::PropertyMap properties; |
| try |
| { |
| sdbusplus::bus::bus bus{ipmid_get_sd_bus_connection()}; |
| |
| ipmi::DbusObjectInfo chassisCapObject = |
| ipmi::getDbusObject(bus, chassisCapIntf); |
| |
| // capabilities flags |
| // [7..4] - reserved |
| // [3] – 1b = provides power interlock (IPM 1.5) |
| // [2] – 1b = provides Diagnostic Interrupt (FP NMI) |
| // [1] – 1b = provides “Front Panel Lockout” (indicates that the chassis |
| // has capabilities |
| // to lock out external power control and reset button or |
| // front panel interfaces and/or detect tampering with those |
| // interfaces). |
| // [0] -1b = Chassis provides intrusion (physical security) sensor. |
| // set to default value 0x0. |
| |
| properties = |
| ipmi::getAllDbusProperties(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf); |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>("Failed to fetch Chassis Capability properties", |
| entry("ERROR=%s", e.what())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| uint8_t* chassisCapFlags = |
| std::get_if<uint8_t>(&properties[chassisCapFlagsProp]); |
| if (chassisCapFlags == nullptr) |
| { |
| log<level::ERR>("Error to get chassis capability flags"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t* chassisFRUInfoDevAddr = |
| std::get_if<uint8_t>(&properties[chassisFRUDevAddrProp]); |
| if (chassisFRUInfoDevAddr == nullptr) |
| { |
| log<level::ERR>("Error to get chassis FRU info device address"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t* chassisSDRDevAddr = |
| std::get_if<uint8_t>(&properties[chassisSDRDevAddrProp]); |
| if (chassisSDRDevAddr == nullptr) |
| { |
| log<level::ERR>("Error to get chassis SDR device address"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t* chassisSELDevAddr = |
| std::get_if<uint8_t>(&properties[chassisSELDevAddrProp]); |
| if (chassisSELDevAddr == nullptr) |
| { |
| log<level::ERR>("Error to get chassis SEL device address"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t* chassisSMDevAddr = |
| std::get_if<uint8_t>(&properties[chassisSMDevAddrProp]); |
| if (chassisSMDevAddr == nullptr) |
| { |
| log<level::ERR>("Error to get chassis SM device address"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t* chassisBridgeDevAddr = |
| std::get_if<uint8_t>(&properties[chassisBridgeDevAddrProp]); |
| if (chassisBridgeDevAddr == nullptr) |
| { |
| log<level::ERR>("Error to get chassis bridge device address"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(*chassisCapFlags, *chassisFRUInfoDevAddr, |
| *chassisSDRDevAddr, *chassisSELDevAddr, |
| *chassisSMDevAddr, *chassisBridgeDevAddr); |
| } |
| |
| /** @brief implements set chassis capalibities command |
| * @param intrusion - chassis intrusion |
| * @param fpLockout - frontpannel lockout |
| * @param reserved1 - skip one bit |
| * @param fruDeviceAddr - chassis FRU info Device Address |
| * @param sdrDeviceAddr - chassis SDR device address |
| * @param selDeviceAddr - chassis SEL device address |
| * @param smDeviceAddr - chassis system management device address |
| * @param bridgeDeviceAddr - chassis bridge device address |
| * |
| * @returns IPMI completion code |
| */ |
| ipmi::RspType<> ipmiSetChassisCap(bool intrusion, bool fpLockout, |
| uint6_t reserved1, |
| |
| uint8_t fruDeviceAddr, |
| |
| uint8_t sdrDeviceAddr, |
| |
| uint8_t selDeviceAddr, |
| |
| uint8_t smDeviceAddr, |
| |
| uint8_t bridgeDeviceAddr) |
| { |
| |
| // check input data |
| if (reserved1 != 0) |
| { |
| log<level::ERR>("Unsupported request parameter"); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if ((fruDeviceAddr & ~chassisCapAddrMask) != 0) |
| { |
| log<level::ERR>("Unsupported request parameter(FRU Addr)", |
| entry("REQ=0x%x", fruDeviceAddr)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| if ((sdrDeviceAddr & ~chassisCapAddrMask) != 0) |
| { |
| log<level::ERR>("Unsupported request parameter(SDR Addr)", |
| entry("REQ=0x%x", sdrDeviceAddr)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if ((selDeviceAddr & ~chassisCapAddrMask) != 0) |
| { |
| log<level::ERR>("Unsupported request parameter(SEL Addr)", |
| entry("REQ=0x%x", selDeviceAddr)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if ((smDeviceAddr & ~chassisCapAddrMask) != 0) |
| { |
| log<level::ERR>("Unsupported request parameter(SM Addr)", |
| entry("REQ=0x%x", smDeviceAddr)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if ((bridgeDeviceAddr & ~chassisCapAddrMask) != 0) |
| { |
| log<level::ERR>("Unsupported request parameter(Bridge Addr)", |
| entry("REQ=0x%x", bridgeDeviceAddr)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| uint8_t capFlags = (static_cast<uint8_t>(intrusion)) | |
| ((static_cast<uint8_t>(fpLockout)) << 1); |
| try |
| { |
| sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection()); |
| ipmi::DbusObjectInfo chassisCapObject = |
| ipmi::getDbusObject(bus, chassisCapIntf); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisCapFlagsProp, capFlags); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisFRUDevAddrProp, fruDeviceAddr); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisSDRDevAddrProp, sdrDeviceAddr); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisSELDevAddrProp, selDeviceAddr); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisSMDevAddrProp, smDeviceAddr); |
| |
| ipmi::setDbusProperty(bus, chassisCapObject.second, |
| chassisCapObject.first, chassisCapIntf, |
| chassisBridgeDevAddrProp, bridgeDeviceAddr); |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>(e.what()); |
| return ipmi::responseUnspecifiedError(); |
| } |
| return ipmi::responseSuccess(); |
| } |
| |
| //------------------------------------------ |
| // Calls into Host State Manager Dbus object |
| //------------------------------------------ |
| int initiate_state_transition(State::Host::Transition transition) |
| { |
| // OpenBMC Host State Manager dbus framework |
| constexpr auto HOST_STATE_MANAGER_ROOT = "/xyz/openbmc_project/state/host0"; |
| constexpr auto HOST_STATE_MANAGER_IFACE = "xyz.openbmc_project.State.Host"; |
| constexpr auto DBUS_PROPERTY_IFACE = "org.freedesktop.DBus.Properties"; |
| constexpr auto PROPERTY = "RequestedHostTransition"; |
| |
| // sd_bus error |
| int rc = 0; |
| char* busname = NULL; |
| |
| // SD Bus error report mechanism. |
| sd_bus_error bus_error = SD_BUS_ERROR_NULL; |
| |
| // Gets a hook onto either a SYSTEM or SESSION bus |
| sd_bus* bus_type = ipmid_get_sd_bus_connection(); |
| rc = mapper_get_service(bus_type, HOST_STATE_MANAGER_ROOT, &busname); |
| if (rc < 0) |
| { |
| log<level::ERR>( |
| "Failed to get bus name", |
| entry("ERRNO=0x%X, OBJPATH=%s", -rc, HOST_STATE_MANAGER_ROOT)); |
| return rc; |
| } |
| |
| // Convert to string equivalent of the passed in transition enum. |
| auto request = State::convertForMessage(transition); |
| |
| rc = sd_bus_call_method(bus_type, // On the system bus |
| busname, // Service to contact |
| HOST_STATE_MANAGER_ROOT, // Object path |
| DBUS_PROPERTY_IFACE, // Interface name |
| "Set", // Method to be called |
| &bus_error, // object to return error |
| nullptr, // Response buffer if any |
| "ssv", // Takes 3 arguments |
| HOST_STATE_MANAGER_IFACE, PROPERTY, "s", |
| request.c_str()); |
| if (rc < 0) |
| { |
| log<level::ERR>("Failed to initiate transition", |
| entry("ERRNO=0x%X, REQUEST=%s", -rc, request.c_str())); |
| } |
| else |
| { |
| log<level::INFO>("Transition request initiated successfully"); |
| } |
| |
| sd_bus_error_free(&bus_error); |
| free(busname); |
| |
| return rc; |
| } |
| |
| //------------------------------------------ |
| // Set Enabled property to inform NMI source |
| // handling to trigger a NMI_OUT BSOD. |
| //------------------------------------------ |
| int setNmiProperty(const bool value) |
| { |
| constexpr const char* nmiSourceObjPath = |
| "/xyz/openbmc_project/Chassis/Control/NMISource"; |
| constexpr const char* nmiSourceIntf = |
| "xyz.openbmc_project.Chassis.Control.NMISource"; |
| std::string bmcSourceSignal = "xyz.openbmc_project.Chassis.Control." |
| "NMISource.BMCSourceSignal.ChassisCmd"; |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| |
| try |
| { |
| auto service = ipmi::getService(*busp, nmiSourceIntf, nmiSourceObjPath); |
| ipmi::setDbusProperty(*busp, service, nmiSourceObjPath, nmiSourceIntf, |
| "BMCSource", bmcSourceSignal); |
| ipmi::setDbusProperty(*busp, service, nmiSourceObjPath, nmiSourceIntf, |
| "Enabled", value); |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>("Failed to trigger NMI_OUT", |
| entry("EXCEPTION=%s", e.what())); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| namespace power_policy |
| { |
| |
| using namespace sdbusplus::xyz::openbmc_project::Control::Power::server; |
| using IpmiValue = uint8_t; |
| using DbusValue = RestorePolicy::Policy; |
| |
| const std::map<DbusValue, IpmiValue> dbusToIpmi = { |
| {RestorePolicy::Policy::AlwaysOff, 0x00}, |
| {RestorePolicy::Policy::Restore, 0x01}, |
| {RestorePolicy::Policy::AlwaysOn, 0x02}}; |
| |
| static constexpr uint8_t noChange = 0x03; |
| static constexpr uint8_t allSupport = 0x01 | 0x02 | 0x04; |
| |
| /* helper function for Get Chassis Status Command |
| */ |
| std::optional<uint2_t> getPowerRestorePolicy() |
| { |
| uint2_t restorePolicy = 0; |
| using namespace chassis::internal; |
| |
| settings::Objects& objects = cache::getObjects(); |
| |
| try |
| { |
| const auto& powerRestoreSetting = |
| objects.map.at(powerRestoreIntf).front(); |
| ipmi::Value result = ipmi::getDbusProperty( |
| *getSdBus(), |
| objects.service(powerRestoreSetting, powerRestoreIntf).c_str(), |
| powerRestoreSetting.c_str(), powerRestoreIntf, |
| "PowerRestorePolicy"); |
| auto powerRestore = RestorePolicy::convertPolicyFromString( |
| std::get<std::string>(result)); |
| restorePolicy = dbusToIpmi.at(powerRestore); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>( |
| "Failed to fetch pgood property", entry("ERROR=%s", e.what()), |
| entry("PATH=%s", objects.map.at(powerRestoreIntf).front().c_str()), |
| entry("INTERFACE=%s", powerRestoreIntf)); |
| cache::objectsPtr.reset(); |
| return std::nullopt; |
| } |
| return std::make_optional(restorePolicy); |
| } |
| |
| /* |
| * getPowerStatus |
| * helper function for Get Chassis Status Command |
| * return - optional value for pgood (no value on error) |
| */ |
| std::optional<bool> getPowerStatus() |
| { |
| bool powerGood = false; |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| try |
| { |
| constexpr const char* chassisStatePath = |
| "/xyz/openbmc_project/state/chassis0"; |
| constexpr const char* chassisStateIntf = |
| "xyz.openbmc_project.State.Chassis"; |
| auto service = |
| ipmi::getService(*busp, chassisStateIntf, chassisStatePath); |
| |
| ipmi::Value powerState = |
| ipmi::getDbusProperty(*busp, service, chassisStatePath, |
| chassisStateIntf, "CurrentPowerState"); |
| powerGood = std::get<std::string>(powerState) == |
| "xyz.openbmc_project.State.Chassis.PowerState.On"; |
| } |
| catch (const std::exception& e) |
| { |
| try |
| { |
| // FIXME: some legacy modules use the older path; try that next |
| constexpr const char* legacyPwrCtrlObj = |
| "/org/openbmc/control/power0"; |
| constexpr const char* legacyPwrCtrlIntf = |
| "org.openbmc.control.Power"; |
| auto service = |
| ipmi::getService(*busp, legacyPwrCtrlIntf, legacyPwrCtrlObj); |
| |
| ipmi::Value variant = ipmi::getDbusProperty( |
| *busp, service, legacyPwrCtrlObj, legacyPwrCtrlIntf, "pgood"); |
| powerGood = static_cast<bool>(std::get<int>(variant)); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>("Failed to fetch pgood property", |
| entry("ERROR=%s", e.what())); |
| return std::nullopt; |
| } |
| } |
| return std::make_optional(powerGood); |
| } |
| |
| /* |
| * getACFailStatus |
| * helper function for Get Chassis Status Command |
| * return - bool value for ACFail (false on error) |
| */ |
| bool getACFailStatus() |
| { |
| constexpr const char* powerControlObj = |
| "/xyz/openbmc_project/Chassis/Control/Power0"; |
| constexpr const char* powerControlIntf = |
| "xyz.openbmc_project.Chassis.Control.Power"; |
| bool acFail = false; |
| std::shared_ptr<sdbusplus::asio::connection> bus = getSdBus(); |
| try |
| { |
| auto service = |
| ipmi::getService(*bus, powerControlIntf, powerControlObj); |
| |
| ipmi::Value variant = ipmi::getDbusProperty( |
| *bus, service, powerControlObj, powerControlIntf, "PFail"); |
| acFail = std::get<bool>(variant); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>("Failed to fetch PFail property", |
| entry("ERROR=%s", e.what()), |
| entry("PATH=%s", powerControlObj), |
| entry("INTERFACE=%s", powerControlIntf)); |
| } |
| return acFail; |
| } |
| } // namespace power_policy |
| |
| static std::optional<bool> getButtonEnabled(const std::string& buttonPath, |
| const std::string& buttonIntf) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| bool buttonDisabled = false; |
| try |
| { |
| auto service = ipmi::getService(*busp, buttonIntf, buttonPath); |
| ipmi::Value enabled = ipmi::getDbusProperty(*busp, service, buttonPath, |
| buttonIntf, "Enabled"); |
| buttonDisabled = !std::get<bool>(enabled); |
| } |
| catch (sdbusplus::exception::SdBusError& e) |
| { |
| log<level::ERR>("Fail to get button Enabled property", |
| entry("PATH=%s", buttonPath.c_str()), |
| entry("ERROR=%s", e.what())); |
| return std::nullopt; |
| } |
| return std::make_optional(buttonDisabled); |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Chassis Status commands |
| //---------------------------------------------------------------------- |
| ipmi::RspType<bool, // Power is on |
| bool, // Power overload |
| bool, // Interlock |
| bool, // power fault |
| bool, // power control fault |
| uint2_t, // power restore policy |
| bool, // reserved |
| |
| bool, // AC failed |
| bool, // last power down caused by a Power overload |
| bool, // last power down caused by a power interlock |
| bool, // last power down caused by power fault |
| bool, // last ‘Power is on’ state was entered via IPMI command |
| uint3_t, // reserved |
| |
| bool, // Chassis intrusion active |
| bool, // Front Panel Lockout active |
| bool, // Drive Fault |
| bool, // Cooling/fan fault detected |
| uint2_t, // Chassis Identify State |
| bool, // Chassis Identify command and state info supported |
| bool, // reserved |
| |
| bool, // Power off button disabled |
| bool, // Reset button disabled |
| bool, // Diagnostic Interrupt button disabled |
| bool, // Standby (sleep) button disabled |
| bool, // Power off button disable allowed |
| bool, // Reset button disable allowed |
| bool, // Diagnostic Interrupt button disable allowed |
| bool // Standby (sleep) button disable allowed |
| > |
| ipmiGetChassisStatus() |
| { |
| using namespace chassis::internal; |
| std::optional<uint2_t> restorePolicy = |
| power_policy::getPowerRestorePolicy(); |
| std::optional<bool> powerGood = power_policy::getPowerStatus(); |
| if (!restorePolicy || !powerGood) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| // Front Panel Button Capabilities and disable/enable status(Optional) |
| std::optional<bool> powerButtonReading = |
| getButtonEnabled(powerButtonPath, powerButtonIntf); |
| // allow disable if the interface is present |
| bool powerButtonDisableAllow = static_cast<bool>(powerButtonReading); |
| // default return the button is enabled (not disabled) |
| bool powerButtonDisabled = false; |
| if (powerButtonDisableAllow) |
| { |
| // return the real value of the button status, if present |
| powerButtonDisabled = *powerButtonReading; |
| } |
| |
| std::optional<bool> resetButtonReading = |
| getButtonEnabled(resetButtonPath, resetButtonIntf); |
| // allow disable if the interface is present |
| bool resetButtonDisableAllow = static_cast<bool>(resetButtonReading); |
| // default return the button is enabled (not disabled) |
| bool resetButtonDisabled = false; |
| if (resetButtonDisableAllow) |
| { |
| // return the real value of the button status, if present |
| resetButtonDisabled = *resetButtonReading; |
| } |
| |
| bool powerDownAcFailed = power_policy::getACFailStatus(); |
| |
| // This response has a lot of hard-coded, unsupported fields |
| // They are set to false or 0 |
| constexpr bool powerOverload = false; |
| constexpr bool chassisInterlock = false; |
| constexpr bool powerFault = false; |
| constexpr bool powerControlFault = false; |
| constexpr bool powerDownOverload = false; |
| constexpr bool powerDownInterlock = false; |
| constexpr bool powerDownPowerFault = false; |
| constexpr bool powerStatusIPMI = false; |
| constexpr bool chassisIntrusionActive = false; |
| constexpr bool frontPanelLockoutActive = false; |
| constexpr bool driveFault = false; |
| constexpr bool coolingFanFault = false; |
| // chassisIdentifySupport set because this command is implemented |
| constexpr bool chassisIdentifySupport = true; |
| uint2_t chassisIdentifyState = static_cast<uint2_t>(chassisIDState); |
| constexpr bool diagButtonDisabled = false; |
| constexpr bool sleepButtonDisabled = false; |
| constexpr bool diagButtonDisableAllow = false; |
| constexpr bool sleepButtonDisableAllow = false; |
| |
| return ipmi::responseSuccess( |
| *powerGood, powerOverload, chassisInterlock, powerFault, |
| powerControlFault, *restorePolicy, |
| false, // reserved |
| |
| powerDownAcFailed, powerDownOverload, powerDownInterlock, |
| powerDownPowerFault, powerStatusIPMI, |
| uint3_t(0), // reserved |
| |
| chassisIntrusionActive, frontPanelLockoutActive, driveFault, |
| coolingFanFault, chassisIdentifyState, chassisIdentifySupport, |
| false, // reserved |
| |
| powerButtonDisabled, resetButtonDisabled, diagButtonDisabled, |
| sleepButtonDisabled, powerButtonDisableAllow, resetButtonDisableAllow, |
| diagButtonDisableAllow, sleepButtonDisableAllow); |
| } |
| |
| //------------------------------------------------------------- |
| // Send a command to SoftPowerOff application to stop any timer |
| //------------------------------------------------------------- |
| int stop_soft_off_timer() |
| { |
| constexpr auto iface = "org.freedesktop.DBus.Properties"; |
| constexpr auto soft_off_iface = "xyz.openbmc_project.Ipmi.Internal." |
| "SoftPowerOff"; |
| |
| constexpr auto property = "ResponseReceived"; |
| constexpr auto value = "xyz.openbmc_project.Ipmi.Internal." |
| "SoftPowerOff.HostResponse.HostShutdown"; |
| |
| // Get the system bus where most system services are provided. |
| auto bus = ipmid_get_sd_bus_connection(); |
| |
| // Get the service name |
| // TODO openbmc/openbmc#1661 - Mapper refactor |
| // |
| // See openbmc/openbmc#1743 for some details but high level summary is that |
| // for now the code will directly call the soft off interface due to a |
| // race condition with mapper usage |
| // |
| // char *busname = nullptr; |
| // auto r = mapper_get_service(bus, SOFTOFF_OBJPATH, &busname); |
| // if (r < 0) |
| //{ |
| // fprintf(stderr, "Failed to get %s bus name: %s\n", |
| // SOFTOFF_OBJPATH, -r); |
| // return r; |
| //} |
| |
| // No error object or reply expected. |
| int rc = sd_bus_call_method(bus, SOFTOFF_BUSNAME, SOFTOFF_OBJPATH, iface, |
| "Set", nullptr, nullptr, "ssv", soft_off_iface, |
| property, "s", value); |
| if (rc < 0) |
| { |
| log<level::ERR>("Failed to set property in SoftPowerOff object", |
| entry("ERRNO=0x%X", -rc)); |
| } |
| |
| // TODO openbmc/openbmc#1661 - Mapper refactor |
| // free(busname); |
| return rc; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Create file to indicate there is no need for softoff notification to host |
| //---------------------------------------------------------------------- |
| void indicate_no_softoff_needed() |
| { |
| fs::path path{HOST_INBAND_REQUEST_DIR}; |
| if (!fs::is_directory(path)) |
| { |
| fs::create_directory(path); |
| } |
| |
| // Add the host instance (default 0 for now) to the file name |
| std::string file{HOST_INBAND_REQUEST_FILE}; |
| auto size = std::snprintf(nullptr, 0, file.c_str(), 0); |
| size++; // null |
| std::unique_ptr<char[]> buf(new char[size]); |
| std::snprintf(buf.get(), size, file.c_str(), 0); |
| |
| // Append file name to directory and create it |
| path /= buf.get(); |
| std::ofstream(path.c_str()); |
| } |
| |
| /** @brief Implementation of chassis control command |
| * |
| * @param - chassisControl command byte |
| * |
| * @return Success or InvalidFieldRequest. |
| */ |
| ipmi::RspType<> ipmiChassisControl(uint8_t chassisControl) |
| { |
| int rc = 0; |
| switch (chassisControl) |
| { |
| case CMD_POWER_ON: |
| rc = initiate_state_transition(State::Host::Transition::On); |
| break; |
| case CMD_POWER_OFF: |
| // This path would be hit in 2 conditions. |
| // 1: When user asks for power off using ipmi chassis command 0x04 |
| // 2: Host asking for power off post shutting down. |
| |
| // If it's a host requested power off, then need to nudge Softoff |
| // application that it needs to stop the watchdog timer if running. |
| // If it is a user requested power off, then this is not really |
| // needed. But then we need to differentiate between user and host |
| // calling this same command |
| |
| // For now, we are going ahead with trying to nudge the soft off and |
| // interpret the failure to do so as a non softoff case |
| rc = stop_soft_off_timer(); |
| |
| // Only request the Off transition if the soft power off |
| // application is not running |
| if (rc < 0) |
| { |
| // First create a file to indicate to the soft off application |
| // that it should not run. Not doing this will result in State |
| // manager doing a default soft power off when asked for power |
| // off. |
| indicate_no_softoff_needed(); |
| |
| // Now request the shutdown |
| rc = initiate_state_transition(State::Host::Transition::Off); |
| } |
| else |
| { |
| log<level::INFO>("Soft off is running, so let shutdown target " |
| "stop the host"); |
| } |
| break; |
| |
| case CMD_HARD_RESET: |
| case CMD_POWER_CYCLE: |
| // SPEC has a section that says certain implementations can trigger |
| // PowerOn if power is Off when a command to power cycle is |
| // requested |
| |
| // First create a file to indicate to the soft off application |
| // that it should not run since this is a direct user initiated |
| // power reboot request (i.e. a reboot request that is not |
| // originating via a soft power off SMS request) |
| indicate_no_softoff_needed(); |
| |
| rc = initiate_state_transition(State::Host::Transition::Reboot); |
| break; |
| |
| case CMD_SOFT_OFF_VIA_OVER_TEMP: |
| // Request Host State Manager to do a soft power off |
| rc = initiate_state_transition(State::Host::Transition::Off); |
| break; |
| |
| case CMD_PULSE_DIAGNOSTIC_INTR: |
| rc = setNmiProperty(true); |
| break; |
| |
| default: |
| { |
| log<level::ERR>("Invalid Chassis Control command", |
| entry("CMD=0x%X", chassisControl)); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| |
| return ((rc < 0) ? ipmi::responseUnspecifiedError() |
| : ipmi::responseSuccess()); |
| } |
| |
| /** @brief Return D-Bus connection string to enclosure identify LED object |
| * |
| * @param[in, out] connection - connection to D-Bus object |
| * @return a IPMI return code |
| */ |
| std::string getEnclosureIdentifyConnection() |
| { |
| // lookup enclosure_identify group owner(s) in mapper |
| auto mapperCall = chassis::internal::dbus.new_method_call( |
| ipmi::MAPPER_BUS_NAME, ipmi::MAPPER_OBJ, ipmi::MAPPER_INTF, |
| "GetObject"); |
| |
| mapperCall.append(identify_led_object_name); |
| static const std::vector<std::string> interfaces = { |
| "xyz.openbmc_project.Led.Group"}; |
| mapperCall.append(interfaces); |
| auto mapperReply = chassis::internal::dbus.call(mapperCall); |
| if (mapperReply.is_method_error()) |
| { |
| log<level::ERR>("Chassis Identify: Error communicating to mapper."); |
| elog<InternalFailure>(); |
| } |
| std::vector<std::pair<std::string, std::vector<std::string>>> mapperResp; |
| mapperReply.read(mapperResp); |
| |
| if (mapperResp.size() != encIdentifyObjectsSize) |
| { |
| log<level::ERR>( |
| "Invalid number of enclosure identify objects.", |
| entry("ENC_IDENTITY_OBJECTS_SIZE=%d", mapperResp.size())); |
| elog<InternalFailure>(); |
| } |
| auto pair = mapperResp[encIdentifyObjectsSize - 1]; |
| return pair.first; |
| } |
| |
| /** @brief Turn On/Off enclosure identify LED |
| * |
| * @param[in] flag - true to turn on LED, false to turn off |
| * @return a IPMI return code |
| */ |
| void enclosureIdentifyLed(bool flag) |
| { |
| using namespace chassis::internal; |
| std::string connection = std::move(getEnclosureIdentifyConnection()); |
| auto msg = std::string("enclosureIdentifyLed(") + |
| boost::lexical_cast<std::string>(flag) + ")"; |
| log<level::DEBUG>(msg.c_str()); |
| auto led = |
| dbus.new_method_call(connection.c_str(), identify_led_object_name, |
| "org.freedesktop.DBus.Properties", "Set"); |
| led.append("xyz.openbmc_project.Led.Group", "Asserted", |
| std::variant<bool>(flag)); |
| auto ledReply = dbus.call(led); |
| if (ledReply.is_method_error()) |
| { |
| log<level::ERR>("Chassis Identify: Error Setting State On/Off\n", |
| entry("LED_STATE=%d", flag)); |
| elog<InternalFailure>(); |
| } |
| } |
| |
| /** @brief Callback method to turn off LED |
| */ |
| void enclosureIdentifyLedOff() |
| { |
| try |
| { |
| chassisIDState = ChassisIDState::off; |
| enclosureIdentifyLed(false); |
| } |
| catch (const InternalFailure& e) |
| { |
| report<InternalFailure>(); |
| } |
| } |
| |
| /** @brief Create timer to turn on and off the enclosure LED |
| */ |
| void createIdentifyTimer() |
| { |
| if (!identifyTimer) |
| { |
| identifyTimer = |
| std::make_unique<phosphor::Timer>(enclosureIdentifyLedOff); |
| } |
| } |
| |
| ipmi::RspType<> ipmiChassisIdentify(std::optional<uint8_t> interval, |
| std::optional<uint8_t> force) |
| { |
| uint8_t identifyInterval = interval.value_or(DEFAULT_IDENTIFY_TIME_OUT); |
| bool forceIdentify = force.value_or(0) & 0x01; |
| |
| if (identifyInterval || forceIdentify) |
| { |
| // stop the timer if already started; |
| // for force identify we should not turn off LED |
| identifyTimer->stop(); |
| try |
| { |
| chassisIDState = ChassisIDState::temporaryOn; |
| enclosureIdentifyLed(true); |
| } |
| catch (const InternalFailure& e) |
| { |
| report<InternalFailure>(); |
| return ipmi::responseResponseError(); |
| } |
| |
| if (forceIdentify) |
| { |
| chassisIDState = ChassisIDState::indefiniteOn; |
| return ipmi::responseSuccess(); |
| } |
| // start the timer |
| auto time = std::chrono::duration_cast<std::chrono::microseconds>( |
| std::chrono::seconds(identifyInterval)); |
| identifyTimer->start(time); |
| } |
| else if (!identifyInterval) |
| { |
| identifyTimer->stop(); |
| enclosureIdentifyLedOff(); |
| } |
| return ipmi::responseSuccess(); |
| } |
| |
| namespace boot_options |
| { |
| |
| using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server; |
| using IpmiValue = uint8_t; |
| constexpr auto ipmiDefault = 0; |
| |
| std::map<IpmiValue, Source::Sources> sourceIpmiToDbus = { |
| {0x01, Source::Sources::Network}, |
| {0x02, Source::Sources::Disk}, |
| {0x05, Source::Sources::ExternalMedia}, |
| {0x0f, Source::Sources::RemovableMedia}, |
| {ipmiDefault, Source::Sources::Default}}; |
| |
| std::map<IpmiValue, Mode::Modes> modeIpmiToDbus = { |
| #ifdef ENABLE_BOOT_FLAG_SAFE_MODE_SUPPORT |
| {0x03, Mode::Modes::Safe}, |
| #endif // ENABLE_BOOT_SAFE_MODE_SUPPORT |
| {0x06, Mode::Modes::Setup}, |
| {ipmiDefault, Mode::Modes::Regular}}; |
| |
| std::map<Source::Sources, IpmiValue> sourceDbusToIpmi = { |
| {Source::Sources::Network, 0x01}, |
| {Source::Sources::Disk, 0x02}, |
| {Source::Sources::ExternalMedia, 0x05}, |
| {Source::Sources::RemovableMedia, 0x0f}, |
| {Source::Sources::Default, ipmiDefault}}; |
| |
| std::map<Mode::Modes, IpmiValue> modeDbusToIpmi = { |
| #ifdef ENABLE_BOOT_FLAG_SAFE_MODE_SUPPORT |
| {Mode::Modes::Safe, 0x03}, |
| #endif // ENABLE_BOOT_SAFE_MODE_SUPPORT |
| {Mode::Modes::Setup, 0x06}, |
| {Mode::Modes::Regular, ipmiDefault}}; |
| |
| } // namespace boot_options |
| |
| /** @brief Set the property value for boot source |
| * @param[in] source - boot source value |
| * @return On failure return IPMI error. |
| */ |
| static ipmi_ret_t setBootSource(const Source::Sources& source) |
| { |
| using namespace chassis::internal; |
| using namespace chassis::internal::cache; |
| std::variant<std::string> property = convertForMessage(source); |
| settings::Objects& objects = getObjects(); |
| auto bootSetting = settings::boot::setting(objects, bootSourceIntf); |
| const auto& bootSourceSetting = std::get<settings::Path>(bootSetting); |
| auto method = dbus.new_method_call( |
| objects.service(bootSourceSetting, bootSourceIntf).c_str(), |
| bootSourceSetting.c_str(), ipmi::PROP_INTF, "Set"); |
| method.append(bootSourceIntf, "BootSource", property); |
| auto reply = dbus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in BootSource Set"); |
| report<InternalFailure>(); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| return IPMI_CC_OK; |
| } |
| |
| /** @brief Set the property value for boot mode |
| * @param[in] mode - boot mode value |
| * @return On failure return IPMI error. |
| */ |
| static ipmi_ret_t setBootMode(const Mode::Modes& mode) |
| { |
| using namespace chassis::internal; |
| using namespace chassis::internal::cache; |
| std::variant<std::string> property = convertForMessage(mode); |
| settings::Objects& objects = getObjects(); |
| auto bootSetting = settings::boot::setting(objects, bootModeIntf); |
| const auto& bootModeSetting = std::get<settings::Path>(bootSetting); |
| auto method = dbus.new_method_call( |
| objects.service(bootModeSetting, bootModeIntf).c_str(), |
| bootModeSetting.c_str(), ipmi::PROP_INTF, "Set"); |
| method.append(bootModeIntf, "BootMode", property); |
| auto reply = dbus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in BootMode Set"); |
| report<InternalFailure>(); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmi_chassis_get_sys_boot_options(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| using namespace boot_options; |
| ipmi_ret_t rc = IPMI_CC_PARM_NOT_SUPPORTED; |
| char* p = NULL; |
| get_sys_boot_options_response_t* resp = |
| (get_sys_boot_options_response_t*)response; |
| get_sys_boot_options_t* reqptr = (get_sys_boot_options_t*)request; |
| IpmiValue bootOption = ipmiDefault; |
| |
| std::memset(resp, 0, sizeof(*resp)); |
| resp->version = SET_PARM_VERSION; |
| resp->parm = 5; |
| resp->data[0] = SET_PARM_BOOT_FLAGS_VALID_ONE_TIME; |
| |
| /* |
| * Parameter #5 means boot flags. Please refer to 28.13 of ipmi doc. |
| * This is the only parameter used by petitboot. |
| */ |
| if (reqptr->parameter == |
| static_cast<uint8_t>(BootOptionParameter::BOOT_FLAGS)) |
| { |
| |
| *data_len = static_cast<uint8_t>(BootOptionResponseSize::BOOT_FLAGS); |
| using namespace chassis::internal; |
| using namespace chassis::internal::cache; |
| |
| try |
| { |
| settings::Objects& objects = getObjects(); |
| auto bootSetting = settings::boot::setting(objects, bootSourceIntf); |
| const auto& bootSourceSetting = |
| std::get<settings::Path>(bootSetting); |
| auto oneTimeEnabled = |
| std::get<settings::boot::OneTimeEnabled>(bootSetting); |
| auto method = dbus.new_method_call( |
| objects.service(bootSourceSetting, bootSourceIntf).c_str(), |
| bootSourceSetting.c_str(), ipmi::PROP_INTF, "Get"); |
| method.append(bootSourceIntf, "BootSource"); |
| auto reply = dbus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in BootSource Get"); |
| report<InternalFailure>(); |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| std::variant<std::string> result; |
| reply.read(result); |
| auto bootSource = |
| Source::convertSourcesFromString(std::get<std::string>(result)); |
| |
| bootSetting = settings::boot::setting(objects, bootModeIntf); |
| const auto& bootModeSetting = std::get<settings::Path>(bootSetting); |
| method = dbus.new_method_call( |
| objects.service(bootModeSetting, bootModeIntf).c_str(), |
| bootModeSetting.c_str(), ipmi::PROP_INTF, "Get"); |
| method.append(bootModeIntf, "BootMode"); |
| reply = dbus.call(method); |
| if (reply.is_method_error()) |
| { |
| log<level::ERR>("Error in BootMode Get"); |
| report<InternalFailure>(); |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| reply.read(result); |
| auto bootMode = |
| Mode::convertModesFromString(std::get<std::string>(result)); |
| |
| bootOption = sourceDbusToIpmi.at(bootSource); |
| if ((Mode::Modes::Regular == bootMode) && |
| (Source::Sources::Default == bootSource)) |
| { |
| bootOption = ipmiDefault; |
| } |
| else if (Source::Sources::Default == bootSource) |
| { |
| bootOption = modeDbusToIpmi.at(bootMode); |
| } |
| resp->data[1] = (bootOption << 2); |
| |
| resp->data[0] = oneTimeEnabled |
| ? SET_PARM_BOOT_FLAGS_VALID_ONE_TIME |
| : SET_PARM_BOOT_FLAGS_VALID_PERMANENT; |
| |
| rc = IPMI_CC_OK; |
| } |
| catch (InternalFailure& e) |
| { |
| cache::objectsPtr.reset(); |
| report<InternalFailure>(); |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| else if (reqptr->parameter == |
| static_cast<uint8_t>(BootOptionParameter::OPAL_NETWORK_SETTINGS)) |
| { |
| |
| *data_len = |
| static_cast<uint8_t>(BootOptionResponseSize::OPAL_NETWORK_SETTINGS); |
| |
| resp->parm = |
| static_cast<uint8_t>(BootOptionParameter::OPAL_NETWORK_SETTINGS); |
| |
| int ret = getHostNetworkData(resp); |
| |
| if (ret < 0) |
| { |
| |
| log<level::ERR>( |
| "getHostNetworkData failed for get_sys_boot_options."); |
| rc = IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| else |
| rc = IPMI_CC_OK; |
| } |
| |
| else |
| { |
| log<level::ERR>("Unsupported parameter", |
| entry("PARAM=0x%x", reqptr->parameter)); |
| } |
| |
| if (p) |
| free(p); |
| |
| if (rc == IPMI_CC_OK) |
| { |
| *data_len += 2; |
| } |
| |
| return rc; |
| } |
| |
| ipmi_ret_t ipmi_chassis_set_sys_boot_options(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| using namespace boot_options; |
| ipmi_ret_t rc = IPMI_CC_OK; |
| set_sys_boot_options_t* reqptr = (set_sys_boot_options_t*)request; |
| |
| std::printf("IPMI SET_SYS_BOOT_OPTIONS reqptr->parameter =[%d]\n", |
| reqptr->parameter); |
| |
| // This IPMI command does not have any resposne data |
| *data_len = 0; |
| |
| /* 000101 |
| * Parameter #5 means boot flags. Please refer to 28.13 of ipmi doc. |
| * This is the only parameter used by petitboot. |
| */ |
| |
| if (reqptr->parameter == (uint8_t)BootOptionParameter::BOOT_FLAGS) |
| { |
| IpmiValue bootOption = ((reqptr->data[1] & 0x3C) >> 2); |
| using namespace chassis::internal; |
| using namespace chassis::internal::cache; |
| auto oneTimeEnabled = false; |
| constexpr auto enabledIntf = "xyz.openbmc_project.Object.Enable"; |
| constexpr auto oneTimePath = |
| "/xyz/openbmc_project/control/host0/boot/one_time"; |
| |
| try |
| { |
| bool permanent = |
| (reqptr->data[0] & SET_PARM_BOOT_FLAGS_PERMANENT) == |
| SET_PARM_BOOT_FLAGS_PERMANENT; |
| |
| settings::Objects& objects = getObjects(); |
| |
| auto bootSetting = settings::boot::setting(objects, bootSourceIntf); |
| |
| oneTimeEnabled = |
| std::get<settings::boot::OneTimeEnabled>(bootSetting); |
| |
| /* |
| * Check if the current boot setting is onetime or permanent, if the |
| * request in the command is otherwise, then set the "Enabled" |
| * property in one_time object path to 'True' to indicate onetime |
| * and 'False' to indicate permanent. |
| * |
| * Once the onetime/permanent setting is applied, then the bootMode |
| * and bootSource is updated for the corresponding object. |
| */ |
| if ((permanent && oneTimeEnabled) || |
| (!permanent && !oneTimeEnabled)) |
| { |
| auto service = ipmi::getService(dbus, enabledIntf, oneTimePath); |
| |
| ipmi::setDbusProperty(dbus, service, oneTimePath, enabledIntf, |
| "Enabled", !permanent); |
| } |
| |
| auto modeItr = modeIpmiToDbus.find(bootOption); |
| auto sourceItr = sourceIpmiToDbus.find(bootOption); |
| if (sourceIpmiToDbus.end() != sourceItr) |
| { |
| rc = setBootSource(sourceItr->second); |
| if (rc != IPMI_CC_OK) |
| { |
| *data_len = 0; |
| return rc; |
| } |
| // If a set boot device is mapping to a boot source, then reset |
| // the boot mode D-Bus property to default. |
| // This way the ipmid code can determine which property is not |
| // at the default value |
| if (sourceItr->second != Source::Sources::Default) |
| { |
| setBootMode(Mode::Modes::Regular); |
| } |
| } |
| if (modeIpmiToDbus.end() != modeItr) |
| { |
| rc = setBootMode(modeItr->second); |
| if (rc != IPMI_CC_OK) |
| { |
| *data_len = 0; |
| return rc; |
| } |
| // If a set boot device is mapping to a boot mode, then reset |
| // the boot source D-Bus property to default. |
| // This way the ipmid code can determine which property is not |
| // at the default value |
| if (modeItr->second != Mode::Modes::Regular) |
| { |
| setBootSource(Source::Sources::Default); |
| } |
| } |
| if ((modeIpmiToDbus.end() == modeItr) && |
| (sourceIpmiToDbus.end() == sourceItr)) |
| { |
| // return error if boot option is not supported |
| *data_len = 0; |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| } |
| catch (InternalFailure& e) |
| { |
| objectsPtr.reset(); |
| report<InternalFailure>(); |
| *data_len = 0; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| else if (reqptr->parameter == |
| (uint8_t)BootOptionParameter::OPAL_NETWORK_SETTINGS) |
| { |
| |
| int ret = setHostNetworkData(reqptr); |
| if (ret < 0) |
| { |
| log<level::ERR>( |
| "setHostNetworkData failed for set_sys_boot_options"); |
| rc = IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| else if (reqptr->parameter == |
| static_cast<uint8_t>(BootOptionParameter::BOOT_INFO)) |
| { |
| // Handle parameter #4 and return command completed normally |
| // (IPMI_CC_OK). There is no implementation in OpenBMC for this |
| // parameter. This is added to support the ipmitool command `chassis |
| // bootdev` which sends set on parameter #4, before setting the boot |
| // flags. |
| rc = IPMI_CC_OK; |
| } |
| else |
| { |
| log<level::ERR>("Unsupported parameter", |
| entry("PARAM=0x%x", reqptr->parameter)); |
| rc = IPMI_CC_PARM_NOT_SUPPORTED; |
| } |
| |
| return rc; |
| } |
| |
| /** @brief implements Get POH counter command |
| * @parameter |
| * - none |
| * @returns IPMI completion code plus response data |
| * - minPerCount - Minutes per count |
| * - counterReading - counter reading |
| */ |
| ipmi::RspType<uint8_t, // Minutes per count |
| uint32_t // Counter reading |
| > |
| ipmiGetPOHCounter() |
| { |
| // sd_bus error |
| try |
| { |
| return ipmi::responseSuccess(static_cast<uint8_t>(poh::minutesPerCount), |
| getPOHCounter()); |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>(e.what()); |
| return ipmi::responseUnspecifiedError(); |
| } |
| } |
| |
| ipmi::RspType<uint3_t, // policy support |
| uint5_t // reserved |
| > |
| ipmiChassisSetPowerRestorePolicy(boost::asio::yield_context yield, |
| uint3_t policy, uint5_t reserved) |
| { |
| power_policy::DbusValue value = |
| power_policy::RestorePolicy::Policy::AlwaysOff; |
| |
| if (reserved || (policy > power_policy::noChange)) |
| { |
| phosphor::logging::log<level::ERR>( |
| "Reserved request parameter", |
| entry("REQ=0x%x", static_cast<int>(policy))); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if (policy == power_policy::noChange) |
| { |
| // just return the supported policy |
| return ipmi::responseSuccess(power_policy::allSupport, reserved); |
| } |
| |
| for (auto const& it : power_policy::dbusToIpmi) |
| { |
| if (it.second == policy) |
| { |
| value = it.first; |
| break; |
| } |
| } |
| |
| try |
| { |
| settings::Objects& objects = chassis::internal::cache::getObjects(); |
| const settings::Path& powerRestoreSetting = |
| objects.map.at(chassis::internal::powerRestoreIntf).front(); |
| std::variant<std::string> property = convertForMessage(value); |
| |
| auto sdbusp = getSdBus(); |
| boost::system::error_code ec; |
| sdbusp->yield_method_call<void>( |
| yield, ec, |
| objects |
| .service(powerRestoreSetting, |
| chassis::internal::powerRestoreIntf) |
| .c_str(), |
| powerRestoreSetting, ipmi::PROP_INTF, "Set", |
| chassis::internal::powerRestoreIntf, "PowerRestorePolicy", |
| property); |
| if (ec) |
| { |
| phosphor::logging::log<level::ERR>("Unspecified Error"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| } |
| catch (InternalFailure& e) |
| { |
| chassis::internal::cache::objectsPtr.reset(); |
| report<InternalFailure>(); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(power_policy::allSupport, reserved); |
| } |
| |
| void register_netfn_chassis_functions() |
| { |
| createIdentifyTimer(); |
| |
| // <Wildcard Command> |
| ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_WILDCARD, NULL, |
| ipmi_chassis_wildcard, PRIVILEGE_USER); |
| |
| // Get Chassis Capabilities |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdGetChassisCapabilities, |
| ipmi::Privilege::User, ipmiGetChassisCap); |
| |
| // Set Chassis Capabilities |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdSetChassisCapabilities, |
| ipmi::Privilege::User, ipmiSetChassisCap); |
| |
| // <Get System Boot Options> |
| ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_GET_SYS_BOOT_OPTIONS, NULL, |
| ipmi_chassis_get_sys_boot_options, |
| PRIVILEGE_OPERATOR); |
| |
| // <Get Chassis Status> |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdGetChassisStatus, |
| ipmi::Privilege::User, ipmiGetChassisStatus); |
| |
| // <Chassis Control> |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdChassisControl, |
| ipmi::Privilege::Operator, ipmiChassisControl); |
| |
| // <Chassis Identify> |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdChassisIdentify, |
| ipmi::Privilege::Operator, ipmiChassisIdentify); |
| |
| // <Set System Boot Options> |
| ipmi_register_callback(NETFUN_CHASSIS, IPMI_CMD_SET_SYS_BOOT_OPTIONS, NULL, |
| ipmi_chassis_set_sys_boot_options, |
| PRIVILEGE_OPERATOR); |
| // <Get POH Counter> |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdGetPohCounter, |
| ipmi::Privilege::User, ipmiGetPOHCounter); |
| |
| // <Set Power Restore Policy> |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnChassis, |
| ipmi::chassis::cmdSetPowerRestorePolicy, |
| ipmi::Privilege::Operator, |
| ipmiChassisSetPowerRestorePolicy); |
| } |