dcmihandler.hpp

#ifndef __HOST_IPMI_DCMI_HANDLER_H__
#define __HOST_IPMI_DCMI_HANDLER_H__

#include <map>
#include <string>
#include <vector>
#include <sdbusplus/bus.hpp>
#include "nlohmann/json.hpp"

namespace dcmi
{

using NumInstances = size_t;
using Json = nlohmann::json;

enum Commands
{
    // Get capability bits
    GET_CAPABILITIES = 0x01,
    GET_POWER_READING = 0x02,
    GET_POWER_LIMIT = 0x03,
    SET_POWER_LIMIT = 0x04,
    APPLY_POWER_LIMIT = 0x05,
    GET_ASSET_TAG = 0x06,
    GET_SENSOR_INFO = 0x07,
    SET_ASSET_TAG = 0x08,
    GET_MGMNT_CTRL_ID_STR = 0x09,
    SET_MGMNT_CTRL_ID_STR = 0x0A,
    GET_TEMP_READINGS = 0x10,
    SET_CONF_PARAMS = 0x12,
    GET_CONF_PARAMS = 0x13,
};

static constexpr auto propIntf = "org.freedesktop.DBus.Properties";
static constexpr auto assetTagIntf =
        "xyz.openbmc_project.Inventory.Decorator.AssetTag";
static constexpr auto assetTagProp = "AssetTag";
static constexpr auto networkServiceName = "xyz.openbmc_project.Network";
static constexpr auto networkConfigObj =
        "/xyz/openbmc_project/network/config";
static constexpr auto networkConfigIntf =
        "xyz.openbmc_project.Network.SystemConfiguration";
static constexpr auto hostNameProp = "HostName";
static constexpr auto temperatureSensorType = 0x01;
static constexpr auto maxInstances = 255;
static constexpr auto configFile =
    "/usr/share/ipmi-providers/dcmi_sensors.json";
static constexpr auto ethernetIntf =
        "xyz.openbmc_project.Network.EthernetInterface";
static constexpr auto ethernetDefaultChannelNum = 0x1;
static constexpr auto networkRoot = "/xyz/openbmc_project/network";
static constexpr auto dhcpObj = "/xyz/openbmc_project/network/config/dhcp";
static constexpr auto dhcpIntf =
        "xyz.openbmc_project.Network.DHCPConfiguration";
static constexpr auto systemBusName = "org.freedesktop.systemd1";
static constexpr auto systemPath = "/org/freedesktop/systemd1";
static constexpr auto systemIntf = "org.freedesktop.systemd1.Manager";

namespace assettag
{

    using ObjectPath = std::string;
    using Service = std::string;
    using Interfaces = std::vector<std::string>;
    using ObjectTree = std::map<ObjectPath, std::map<Service, Interfaces>>;

} //namespace assettag

namespace temp_readings
{
    static constexpr auto maxDataSets = 8;
    static constexpr auto maxTemp = 127; // degrees C

    /** @struct Response
     *
     *  DCMI payload for Get Temperature Readings response
     */
    struct Response
    {
#if BYTE_ORDER == LITTLE_ENDIAN
        uint8_t temperature: 7;   //!< Temperature reading in Celsius
        uint8_t sign: 1;          //!< Sign bit
#endif
#if BYTE_ORDER == BIG_ENDIAN
        uint8_t sign: 1;          //!< Sign bit
        uint8_t temperature: 7;   //!< Temperature reading in Celsius
#endif
        uint8_t instance;       //!< Entity instance number
    } __attribute__((packed));

    using ResponseList = std::vector<Response>;
    using Value = uint8_t;
    using Sign = bool;
    using Temperature = std::tuple<Value, Sign>;
}

namespace sensor_info
{
    static constexpr auto maxRecords = 8;

    /** @struct Response
     *
     *  DCMI payload for Get Sensor Info response
     */
    struct Response
    {
        uint8_t recordIdLsb;       //!< SDR record id LS byte
        uint8_t recordIdMsb;       //!< SDR record id MS byte
    } __attribute__((packed));

    using ResponseList = std::vector<Response>;
} // namespace sensor_info

static constexpr auto groupExtId = 0xDC;

static constexpr auto assetTagMaxOffset = 62;
static constexpr auto assetTagMaxSize = 63;
static constexpr auto maxBytes = 16;
static constexpr size_t maxCtrlIdStrLen = 63;

/** @struct GetAssetTagRequest
 *
 *  DCMI payload for Get Asset Tag command request.
 */
struct GetAssetTagRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t offset;             //!< Offset to read.
    uint8_t bytes;              //!< Number of bytes to read.
} __attribute__((packed));

/** @struct GetAssetTagResponse
 *
 *  DCMI payload for Get Asset Tag command response.
 */
struct GetAssetTagResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t tagLength;          //!< Total asset tag length.
} __attribute__((packed));

/** @struct SetAssetTagRequest
 *
 *  DCMI payload for Set Asset Tag command request.
 */
struct SetAssetTagRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t offset;             //!< Offset to write.
    uint8_t bytes;              //!< Number of bytes to write.
} __attribute__((packed));

/** @struct SetAssetTagResponse
 *
 *  DCMI payload for Set Asset Tag command response.
 */
struct SetAssetTagResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t tagLength;          //!< Total asset tag length.
} __attribute__((packed));

/** @brief Read the object tree to fetch the object path that implemented the
 *         Asset tag interface.
 *
 *  @param[in,out] objectTree - object tree
 *
 *  @return On success return the object tree with the object path that
 *          implemented the AssetTag interface.
 */
void readAssetTagObjectTree(dcmi::assettag::ObjectTree& objectTree);

/** @brief Read the asset tag of the server
 *
 *  @return On success return the asset tag.
 */
std::string readAssetTag();

/** @brief Write the asset tag to the asset tag DBUS property
 *
 *  @param[in] assetTag - Asset Tag to be written to the property.
 */
void writeAssetTag(const std::string& assetTag);

/** @brief Read the current power cap value
 *
 *  @param[in] bus - dbus connection
 *
 *  @return On success return the power cap value.
 */
uint32_t getPcap(sdbusplus::bus::bus& bus);

/** @brief Check if the power capping is enabled
 *
 *  @param[in] bus - dbus connection
 *
 *  @return true if the powerCap is enabled and false if the powercap
 *          is disabled.
 */
bool getPcapEnabled(sdbusplus::bus::bus& bus);

/** @struct GetPowerLimitRequest
 *
 *  DCMI payload for Get Power Limit command request.
 */
struct GetPowerLimitRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint16_t reserved;          //!< Reserved
} __attribute__((packed));

/** @struct GetPowerLimitResponse
 *
 *  DCMI payload for Get Power Limit command response.
 */
struct GetPowerLimitResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint16_t reserved;          //!< Reserved.
    uint8_t exceptionAction;    //!< Exception action.
    uint16_t powerLimit;        //!< Power limit requested in watts.
    uint32_t correctionTime;    //!< Correction time limit in milliseconds.
    uint16_t reserved1;         //!< Reserved.
    uint16_t samplingPeriod;    //!< Statistics sampling period in seconds.
} __attribute__((packed));

/** @brief Set the power cap value
 *
 *  @param[in] bus - dbus connection
 *  @param[in] powerCap - power cap value
 */
void setPcap(sdbusplus::bus::bus& bus, const uint32_t powerCap);

/** @struct SetPowerLimitRequest
 *
 *  DCMI payload for Set Power Limit command request.
 */
struct SetPowerLimitRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint16_t reserved;          //!< Reserved
    uint8_t reserved1;          //!< Reserved
    uint8_t exceptionAction;    //!< Exception action.
    uint16_t powerLimit;        //!< Power limit requested in watts.
    uint32_t correctionTime;    //!< Correction time limit in milliseconds.
    uint16_t reserved2;         //!< Reserved.
    uint16_t samplingPeriod;    //!< Statistics sampling period in seconds.
} __attribute__((packed));

/** @struct SetPowerLimitResponse
 *
 *  DCMI payload for Set Power Limit command response.
 */
struct SetPowerLimitResponse
{
    uint8_t groupID;            //!< Group extension identification.
} __attribute__((packed));

/** @brief Enable or disable the power capping
 *
 *  @param[in] bus - dbus connection
 *  @param[in] enabled - enable/disable
 */
void setPcapEnable(sdbusplus::bus::bus& bus, bool enabled);

/** @struct ApplyPowerLimitRequest
 *
 *  DCMI payload for Activate/Deactivate Power Limit command request.
 */
struct ApplyPowerLimitRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t powerLimitAction;   //!< Power limit activation
    uint16_t reserved;          //!< Reserved
} __attribute__((packed));

/** @struct ApplyPowerLimitResponse
 *
 *  DCMI payload for Acticate/Deactivate Power Limit command response.
 */
struct ApplyPowerLimitResponse
{
    uint8_t groupID;            //!< Group extension identification.
} __attribute__((packed));

/** @struct GetMgmntCtrlIdStrRequest
 *
 *  DCMI payload for Get Management Controller Identifier String cmd request.
 */
struct GetMgmntCtrlIdStrRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t offset;             //!< Offset to read.
    uint8_t bytes;              //!< Number of bytes to read.
} __attribute__((packed));

/** @struct GetMgmntCtrlIdStrResponse
 *
 *  DCMI payload for Get Management Controller Identifier String cmd response.
 */
struct GetMgmntCtrlIdStrResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t strLen;             //!< ID string length.
    char data[];                //!< ID string
} __attribute__((packed));

/** @struct SetMgmntCtrlIdStrRequest
 *
 *  DCMI payload for Set Management Controller Identifier String cmd request.
 */
struct SetMgmntCtrlIdStrRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t offset;             //!< Offset to write.
    uint8_t bytes;              //!< Number of bytes to read.
    char data[];                //!< ID string
} __attribute__((packed));

/** @struct GetMgmntCtrlIdStrResponse
 *
 *  DCMI payload for Get Management Controller Identifier String cmd response.
 */
struct SetMgmntCtrlIdStrResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t offset;             //!< Last Offset Written.
} __attribute__((packed));

/** @enum DCMICapParameters
 *
 * DCMI Capability parameters
 */
enum class DCMICapParameters
{
    SUPPORTED_DCMI_CAPS = 0x01,             //!< Supported DCMI Capabilities
    MANDATORY_PLAT_ATTRIBUTES = 0x02,       //!< Mandatory Platform Attributes
    OPTIONAL_PLAT_ATTRIBUTES = 0x03,        //!< Optional Platform Attributes
    MANAGEABILITY_ACCESS_ATTRIBUTES = 0x04, //!< Manageability Access Attributes
};

/** @struct GetDCMICapRequest
 *
 *  DCMI payload for Get capabilities cmd request.
 */
struct GetDCMICapRequest
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t param;              //!< Capability parameter selector.
} __attribute__((packed));

/** @struct GetDCMICapRequest
 *
 *  DCMI payload for Get capabilities cmd response.
 */
struct GetDCMICapResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint8_t major;              //!< DCMI Specification Conformance - major ver
    uint8_t minor;              //!< DCMI Specification Conformance - minor ver
    uint8_t paramRevision;      //!< Parameter Revision = 02h
    uint8_t data[];             //!< Capability array
} __attribute__((packed));

/** @struct DCMICap
 *
 *  DCMI capabilities protocol info.
 */
struct DCMICap
{
    std::string name;           //!< Name of DCMI capability.
    uint8_t bytePosition;       //!< Starting byte number from DCMI spec.
    uint8_t position;           //!< bit position from the DCMI spec.
    uint8_t length;             //!< Length of the value from DCMI spec.
};

using DCMICapList = std::vector<DCMICap>;

/** @struct DCMICapEntry
 *
 *  DCMI capabilities list and size for each parameter.
 */
struct DCMICapEntry
{
    uint8_t size;               //!< Size of capability array in bytes.
    DCMICapList capList;        //!< List of capabilities for a parameter.
};

using DCMICaps = std::map<DCMICapParameters, DCMICapEntry>;

/** @struct GetTempReadingsRequest
 *
 *  DCMI payload for Get Temperature Readings request
 */
struct GetTempReadingsRequest
{
    uint8_t groupID;             //!< Group extension identification.
    uint8_t sensorType;          //!< Type of the sensor
    uint8_t entityId;            //!< Entity ID
    uint8_t entityInstance;      //!< Entity Instance (0 means all instances)
    uint8_t instanceStart;       //!< Instance start (used if instance is 0)
} __attribute__((packed));

/** @struct GetTempReadingsResponse
 *
 *  DCMI header for Get Temperature Readings response
 */
struct GetTempReadingsResponseHdr
{
    uint8_t groupID;                //!< Group extension identification.
    uint8_t numInstances;           //!< No. of instances for requested id
    uint8_t numDataSets;            //!< No. of sets of temperature data
} __attribute__((packed));

/** @brief Parse out JSON config file containing information
 *         related to sensors.
 *
 *  @return A json object
 */
Json parseSensorConfig();

namespace temp_readings
{
    /** @brief Read temperature from a d-bus object, scale it as per dcmi
     *         get temperature reading requirements.
     *
     *  @param[in] dbusService - the D-Bus service
     *  @param[in] dbusPath - the D-Bus path
     *
     *  @return A temperature reading
     */
    Temperature readTemp(const std::string& dbusService,
                         const std::string& dbusPath);

    /** @brief Read temperatures and fill up DCMI response for the Get
     *         Temperature Readings command. This looks at a specific
     *         instance.
     *
     *  @param[in] type - one of "inlet", "cpu", "baseboard"
     *  @param[in] instance - A non-zero Entity instance number
     *
     *  @return A tuple, containing a temperature reading and the
     *          number of instances.
     */
    std::tuple<Response, NumInstances> read (const std::string& type,
                                             uint8_t instance);

    /** @brief Read temperatures and fill up DCMI response for the Get
     *         Temperature Readings command. This looks at a range of
     *         instances.
     *
     *  @param[in] type - one of "inlet", "cpu", "baseboard"
     *  @param[in] instanceStart - Entity instance start index
     *
     *  @return A tuple, containing a list of temperature readings and the
     *          number of instances.
     */
    std::tuple<ResponseList, NumInstances> readAll(const std::string& type,
                                                   uint8_t instanceStart);
}

namespace sensor_info
{
    /** @brief Create response from JSON config.
     *
     *  @param[in] config - JSON config info about DCMI sensors
     *
     *  @return Sensor info response
     */
    Response createFromJson(const Json& config);

    /** @brief Read sensor info and fill up DCMI response for the Get
     *         Sensor Info command. This looks at a specific
     *         instance.
     *
     *  @param[in] type - one of "inlet", "cpu", "baseboard"
     *  @param[in] instance - A non-zero Entity instance number
     *  @param[in] config - JSON config info about DCMI sensors
     *
     *  @return A tuple, containing a sensor info response and
     *          number of instances.
     */
    std::tuple<Response, NumInstances> read(const std::string& type,
                                            uint8_t instance,
                                            const Json& config);

    /** @brief Read sensor info and fill up DCMI response for the Get
     *         Sensor Info command. This looks at a range of
     *         instances.
     *
     *  @param[in] type - one of "inlet", "cpu", "baseboard"
     *  @param[in] instanceStart - Entity instance start index
     *  @param[in] config - JSON config info about DCMI sensors
     *
     *  @return A tuple, containing a list of sensor info responses and the
     *          number of instances.
     */
    std::tuple<ResponseList, NumInstances> readAll(const std::string& type,
                                                   uint8_t instanceStart,
                                                   const Json& config);
} // namespace sensor_info

/** @brief Read power reading from power reading sensor object
 *
 *  @param[in] bus - dbus connection
 *
 *  @return total power reading
 */
int64_t getPowerReading(sdbusplus::bus::bus& bus);

/** @struct GetPowerReadingRequest
 *
 *  DCMI Get Power Reading command request.
 *  Refer DCMI specification Version 1.1 Section 6.6.1
 */
struct GetPowerReadingRequest
{
    uint8_t groupID;        //!< Group extension identification.
    uint8_t mode;           //!< Mode
    uint8_t modeAttribute;  //!< Mode Attributes
} __attribute__((packed));

/** @struct GetPowerReadingResponse
 *
 *  DCMI Get Power Reading command response.
 *  Refer DCMI specification Version 1.1 Section 6.6.1
 */
struct GetPowerReadingResponse
{
    uint8_t groupID;            //!< Group extension identification.
    uint16_t currentPower;      //!< Current power in watts
    uint16_t minimumPower;      //!< Minimum power over sampling duration
                                //!< in watts
    uint16_t maximumPower;      //!< Maximum power over sampling duration
                                //!< in watts
    uint16_t averagePower;      //!< Average power over sampling duration
                                //!< in watts
    uint32_t timeStamp;         //!< IPMI specification based time stamp
    uint32_t timeFrame;         //!< Statistics reporting time period in milli
                                //!< seconds.
    uint8_t powerReadingState;  //!< Power Reading State
} __attribute__((packed));

/** @struct GetSensorInfoRequest
 *
 *  DCMI payload for Get Sensor Info request
 */
struct GetSensorInfoRequest
{
    uint8_t groupID;             //!< Group extension identification.
    uint8_t sensorType;          //!< Type of the sensor
    uint8_t entityId;            //!< Entity ID
    uint8_t entityInstance;      //!< Entity Instance (0 means all instances)
    uint8_t instanceStart;       //!< Instance start (used if instance is 0)
} __attribute__((packed));

/** @struct GetSensorInfoResponseHdr
 *
 *  DCMI header for Get Sensor Info response
 */
struct GetSensorInfoResponseHdr
{
    uint8_t groupID;                //!< Group extension identification.
    uint8_t numInstances;           //!< No. of instances for requested id
    uint8_t numRecords;             //!< No. of record ids in the response
} __attribute__((packed));
/**
 *  @brief Parameters for DCMI Configuration Parameters
 */
enum class DCMIConfigParameters: uint8_t
{
    ActivateDHCP = 1,
    DiscoveryConfig,
    DHCPTiming1,
    DHCPTiming2,
    DHCPTiming3,
};

/** @struct SetConfParamsRequest
 *
 *  DCMI Set DCMI Configuration Parameters Command.
 *  Refer DCMI specification Version 1.1 Section 6.1.2
 */
struct SetConfParamsRequest
{
    uint8_t groupID;        //!< Group extension identification.
    uint8_t paramSelect;    //!< Parameter selector.
    uint8_t setSelect;      //!< Set Selector (use 00h for parameters that only
                            //!< have one set).
    uint8_t data[];         //!< Configuration parameter data.
} __attribute__((packed));

/** @struct SetConfParamsResponse
 *
 *  DCMI Set DCMI Configuration Parameters Command response.
 *  Refer DCMI specification Version 1.1 Section 6.1.2
 */
struct SetConfParamsResponse
{
    uint8_t  groupID;        //!< Group extension identification.
} __attribute__((packed));

/** @struct GetConfParamsRequest
 *
 *  DCMI Get DCMI Configuration Parameters Command.
 *  Refer DCMI specification Version 1.1 Section 6.1.3
 */
struct GetConfParamsRequest
{
    uint8_t groupID;        //!< Group extension identification.
    uint8_t paramSelect;    //!< Parameter selector.
    uint8_t setSelect;      //!< Set Selector. Selects a given set of parameters
                            //!< under a given Parameter selector value. 00h if
                            //!< parameter doesn't use a Set Selector.
} __attribute__((packed));

/** @struct GetConfParamsResponse
 *
 *  DCMI Get DCMI Configuration Parameters Command response.
 *  Refer DCMI specification Version 1.1 Section 6.1.3
 */
struct GetConfParamsResponse
{
    uint8_t groupID;         //!< Group extension identification.
    uint8_t major;           //!< DCMI Spec Conformance - major ver = 01h.
    uint8_t minor;           //!< DCMI Spec Conformance - minor ver = 05h.
    uint8_t paramRevision;   //!< Parameter Revision = 01h.
    uint8_t data[];          //!< Parameter data.

} __attribute__((packed));

} // namespace dcmi

#endif