extensions/openpower-pels/pldm_interface.cpp - openbmc/phosphor-logging - Gitiles

 /**
  * Copyright © 2019 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "pldm_interface.hpp"

 #include <libpldm/base.h>
 #include <libpldm/file_io.h>
 #include <systemd/sd-bus.h>
 #include <unistd.h>

 #include <fstream>
 #include <phosphor-logging/log.hpp>

 namespace openpower::pels
 {

 namespace service
 {
 constexpr auto pldm = "xyz.openbmc_project.PLDM";
 }

 namespace object_path
 {
 constexpr auto pldm = "/xyz/openbmc_project/pldm";
 }

 namespace interface
 {
 constexpr auto pldm_requester = "xyz.openbmc_project.PLDM.Requester";
 }

 using namespace phosphor::logging;
 using namespace sdeventplus;
 using namespace sdeventplus::source;

 constexpr auto eidPath = "/usr/share/pldm/host_eid";
 constexpr mctp_eid_t defaultEIDValue = 9;

 constexpr uint16_t pelFileType = 0;

 PLDMInterface::~PLDMInterface()
 {
     sd_bus_unref(_bus);
     closeFD();
 }

 void PLDMInterface::closeFD()
 {
     if (_fd >= 0)
     {
         close(_fd);
         _fd = -1;
     }
 }

 void PLDMInterface::readEID()
 {
     _eid = defaultEIDValue;

     std::ifstream eidFile{eidPath};
     if (!eidFile.good())
     {
         log<level::ERR>("Could not open host EID file");
     }
     else
     {
         std::string eid;
         eidFile >> eid;
         if (!eid.empty())
         {
             _eid = atoi(eid.c_str());
         }
         else
         {
             log<level::ERR>("EID file was empty");
         }
     }
 }

 void PLDMInterface::open()
 {
     _fd = pldm_open();
     if (_fd < 0)
     {
         auto e = errno;
         log<level::ERR>("pldm_open failed", entry("ERRNO=%d", e),
                         entry("RC=%d\n", _fd));
         throw std::exception{};
     }
 }

 void PLDMInterface::instanceIDCallback(sd_bus_message* msg)
 {
     if (!_inProgress)
     {
         // A cancelCmd was run, just return
         log<level::INFO>(
             "A command was canceled while waiting for the instance ID");
         return;
     }

     bool failed = false;

     auto rc = sd_bus_message_get_errno(msg);
     if (rc)
     {
         log<level::ERR>("GetInstanceId D-Bus method failed",
                         entry("ERRNO=%d", rc));
         failed = true;
     }
     else
     {
         uint8_t id;
         rc = sd_bus_message_read_basic(msg, 'y', &id);
         if (rc < 0)
         {
             log<level::ERR>("Could not read instance ID out of message",
                             entry("ERROR=%d", rc));
             failed = true;
         }
         else
         {
             _instanceID = id;
         }
     }

     if (failed)
     {
         _inProgress = false;
         callResponseFunc(ResponseStatus::failure);
     }
     else
     {
         startCommand();
     }
 }

 int iidCallback(sd_bus_message* msg, void* data, sd_bus_error* /*err*/)
 {
     auto* interface = static_cast<PLDMInterface*>(data);
     interface->instanceIDCallback(msg);
     return 0;
 }

 void PLDMInterface::startCommand()
 {
     try
     {
         closeFD();

         open();

         registerReceiveCallback();

         doSend();

         _receiveTimer.restartOnce(_receiveTimeout);
     }
     catch (const std::exception& e)
     {
         cleanupCmd();

         callResponseFunc(ResponseStatus::failure);
     }
 }

 void PLDMInterface::startReadInstanceID()
 {
     auto rc = sd_bus_call_method_async(
         _bus, NULL, service::pldm, object_path::pldm, interface::pldm_requester,
         "GetInstanceId", iidCallback, this, "y", _eid);

     if (rc < 0)
     {
         log<level::ERR>("Error calling sd_bus_call_method_async",
                         entry("RC=%d", rc), entry("MSG=%s", strerror(-rc)));
         throw std::exception{};
     }
 }

 CmdStatus PLDMInterface::sendNewLogCmd(uint32_t id, uint32_t size)
 {
     _pelID = id;
     _pelSize = size;
     _inProgress = true;

     try
     {
         // Kick off the async call to get the instance ID if
         // necessary, otherwise start the command itself.
         if (!_instanceID)
         {
             startReadInstanceID();
         }
         else
         {
             startCommand();
         }
     }
     catch (const std::exception& e)
     {
         _inProgress = false;
         return CmdStatus::failure;
     }

     return CmdStatus::success;
 }

 void PLDMInterface::registerReceiveCallback()
 {
     _source = std::make_unique<IO>(
         _event, _fd, EPOLLIN,
         std::bind(std::mem_fn(&PLDMInterface::receive), this,
                   std::placeholders::_1, std::placeholders::_2,
                   std::placeholders::_3));
 }

 void PLDMInterface::doSend()
 {
     std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(pelFileType) +
                             sizeof(_pelID) + sizeof(uint64_t)>
         requestMsg;

     auto request = reinterpret_cast<pldm_msg*>(requestMsg.data());

     auto rc = encode_new_file_req(*_instanceID, pelFileType, _pelID, _pelSize,
                                   request);
     if (rc != PLDM_SUCCESS)
     {
         log<level::ERR>("encode_new_file_req failed", entry("RC=%d", rc));
         throw std::exception{};
     }

     rc = pldm_send(_eid, _fd, requestMsg.data(), requestMsg.size());
     if (rc < 0)
     {
         auto e = errno;
         log<level::ERR>("pldm_send failed", entry("RC=%d", rc),
                         entry("ERRNO=%d", e));

         throw std::exception{};
     }
 }

 void PLDMInterface::receive(IO& /*io*/, int fd, uint32_t revents)
 {
     if (!(revents & EPOLLIN))
     {
         return;
     }

     uint8_t* responseMsg = nullptr;
     size_t responseSize = 0;
     ResponseStatus status = ResponseStatus::success;

     auto rc = pldm_recv(_eid, fd, *_instanceID, &responseMsg, &responseSize);
     if (rc < 0)
     {
         if (rc == PLDM_REQUESTER_INSTANCE_ID_MISMATCH)
         {
             // We got a response to someone else's message. Ignore it.
             return;
         }
         else if (rc == PLDM_REQUESTER_NOT_RESP_MSG)
         {
             // Due to the MCTP loopback, we may get notified of the message
             // we just sent.
             return;
         }

         auto e = errno;
         log<level::ERR>("pldm_recv failed", entry("RC=%d", rc),
                         entry("ERRNO=%d", e));
         status = ResponseStatus::failure;

         responseMsg = nullptr;
     }

     cleanupCmd();

     // Can't use this instance ID anymore.
     _instanceID = std::nullopt;

     if (status == ResponseStatus::success)
     {
         uint8_t completionCode = 0;
         auto response = reinterpret_cast<pldm_msg*>(responseMsg);

         auto decodeRC = decode_new_file_resp(response, PLDM_NEW_FILE_RESP_BYTES,
                                              &completionCode);
         if (decodeRC < 0)
         {
             log<level::ERR>("decode_new_file_resp failed",
                             entry("RC=%d", decodeRC));
             status = ResponseStatus::failure;
         }
         else
         {
             if (completionCode != PLDM_SUCCESS)
             {
                 log<level::ERR>("Bad PLDM completion code",
                                 entry("COMPLETION_CODE=%d", completionCode));
                 status = ResponseStatus::failure;
             }
         }
     }

     callResponseFunc(status);

     if (responseMsg)
     {
         free(responseMsg);
     }
 }

 void PLDMInterface::receiveTimerExpired()
 {
     log<level::ERR>("Timed out waiting for PLDM response");

     // Cleanup, but keep the instance ID because the host didn't
     // respond so we can still use it.
     cleanupCmd();

     callResponseFunc(ResponseStatus::failure);
 }

 void PLDMInterface::cancelCmd()
 {
     _instanceID = std::nullopt;
     cleanupCmd();
 }

 void PLDMInterface::cleanupCmd()
 {
     _inProgress = false;
     _source.reset();

     if (_receiveTimer.isEnabled())
     {
         _receiveTimer.setEnabled(false);
     }

     closeFD();
 }

 } // namespace openpower::pels
	/**
	* Copyright © 2019 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "pldm_interface.hpp"

	#include <libpldm/base.h>
	#include <libpldm/file_io.h>
	#include <systemd/sd-bus.h>
	#include <unistd.h>

	#include <fstream>
	#include <phosphor-logging/log.hpp>

	namespace openpower::pels
	{

	namespace service
	{
	constexpr auto pldm = "xyz.openbmc_project.PLDM";
	}

	namespace object_path
	{
	constexpr auto pldm = "/xyz/openbmc_project/pldm";
	}

	namespace interface
	{
	constexpr auto pldm_requester = "xyz.openbmc_project.PLDM.Requester";
	}

	using namespace phosphor::logging;
	using namespace sdeventplus;
	using namespace sdeventplus::source;

	constexpr auto eidPath = "/usr/share/pldm/host_eid";
	constexpr mctp_eid_t defaultEIDValue = 9;

	constexpr uint16_t pelFileType = 0;

	PLDMInterface::~PLDMInterface()
	{
	sd_bus_unref(_bus);
	closeFD();
	}

	void PLDMInterface::closeFD()
	{
	if (_fd >= 0)
	{
	close(_fd);
	_fd = -1;
	}
	}

	void PLDMInterface::readEID()
	{
	_eid = defaultEIDValue;

	std::ifstream eidFile{eidPath};
	if (!eidFile.good())
	{
	log<level::ERR>("Could not open host EID file");
	}
	else
	{
	std::string eid;
	eidFile >> eid;
	if (!eid.empty())
	{
	_eid = atoi(eid.c_str());
	}
	else
	{
	log<level::ERR>("EID file was empty");
	}
	}
	}

	void PLDMInterface::open()
	{
	_fd = pldm_open();
	if (_fd < 0)
	{
	auto e = errno;
	log<level::ERR>("pldm_open failed", entry("ERRNO=%d", e),
	entry("RC=%d\n", _fd));
	throw std::exception{};
	}
	}

	void PLDMInterface::instanceIDCallback(sd_bus_message* msg)
	{
	if (!_inProgress)
	{
	// A cancelCmd was run, just return
	log<level::INFO>(
	"A command was canceled while waiting for the instance ID");
	return;
	}

	bool failed = false;

	auto rc = sd_bus_message_get_errno(msg);
	if (rc)
	{
	log<level::ERR>("GetInstanceId D-Bus method failed",
	entry("ERRNO=%d", rc));
	failed = true;
	}
	else
	{
	uint8_t id;
	rc = sd_bus_message_read_basic(msg, 'y', &id);
	if (rc < 0)
	{
	log<level::ERR>("Could not read instance ID out of message",
	entry("ERROR=%d", rc));
	failed = true;
	}
	else
	{
	_instanceID = id;
	}
	}

	if (failed)
	{
	_inProgress = false;
	callResponseFunc(ResponseStatus::failure);
	}
	else
	{
	startCommand();
	}
	}

	int iidCallback(sd_bus_message* msg, void* data, sd_bus_error* /err/)
	{
	auto* interface = static_cast<PLDMInterface*>(data);
	interface->instanceIDCallback(msg);
	return 0;
	}

	void PLDMInterface::startCommand()
	{
	try
	{
	closeFD();

	open();

	registerReceiveCallback();

	doSend();

	_receiveTimer.restartOnce(_receiveTimeout);
	}
	catch (const std::exception& e)
	{
	cleanupCmd();

	callResponseFunc(ResponseStatus::failure);
	}
	}

	void PLDMInterface::startReadInstanceID()
	{
	auto rc = sd_bus_call_method_async(
	_bus, NULL, service::pldm, object_path::pldm, interface::pldm_requester,
	"GetInstanceId", iidCallback, this, "y", _eid);

	if (rc < 0)
	{
	log<level::ERR>("Error calling sd_bus_call_method_async",
	entry("RC=%d", rc), entry("MSG=%s", strerror(-rc)));
	throw std::exception{};
	}
	}

	CmdStatus PLDMInterface::sendNewLogCmd(uint32_t id, uint32_t size)
	{
	_pelID = id;
	_pelSize = size;
	_inProgress = true;

	try
	{
	// Kick off the async call to get the instance ID if
	// necessary, otherwise start the command itself.
	if (!_instanceID)
	{
	startReadInstanceID();
	}
	else
	{
	startCommand();
	}
	}
	catch (const std::exception& e)
	{
	_inProgress = false;
	return CmdStatus::failure;
	}

	return CmdStatus::success;
	}

	void PLDMInterface::registerReceiveCallback()
	{
	_source = std::make_unique<IO>(
	_event, _fd, EPOLLIN,
	std::bind(std::mem_fn(&PLDMInterface::receive), this,
	std::placeholders::_1, std::placeholders::_2,
	std::placeholders::_3));
	}

	void PLDMInterface::doSend()
	{
	std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(pelFileType) +
	sizeof(_pelID) + sizeof(uint64_t)>
	requestMsg;

	auto request = reinterpret_cast<pldm_msg*>(requestMsg.data());

	auto rc = encode_new_file_req(*_instanceID, pelFileType, _pelID, _pelSize,
	request);
	if (rc != PLDM_SUCCESS)
	{
	log<level::ERR>("encode_new_file_req failed", entry("RC=%d", rc));
	throw std::exception{};
	}

	rc = pldm_send(_eid, _fd, requestMsg.data(), requestMsg.size());
	if (rc < 0)
	{
	auto e = errno;
	log<level::ERR>("pldm_send failed", entry("RC=%d", rc),
	entry("ERRNO=%d", e));

	throw std::exception{};
	}
	}

	void PLDMInterface::receive(IO& /io/, int fd, uint32_t revents)
	{
	if (!(revents & EPOLLIN))
	{
	return;
	}

	uint8_t* responseMsg = nullptr;
	size_t responseSize = 0;
	ResponseStatus status = ResponseStatus::success;

	auto rc = pldm_recv(_eid, fd, *_instanceID, &responseMsg, &responseSize);
	if (rc < 0)
	{
	if (rc == PLDM_REQUESTER_INSTANCE_ID_MISMATCH)
	{
	// We got a response to someone else's message. Ignore it.
	return;
	}
	else if (rc == PLDM_REQUESTER_NOT_RESP_MSG)
	{
	// Due to the MCTP loopback, we may get notified of the message
	// we just sent.
	return;
	}

	auto e = errno;
	log<level::ERR>("pldm_recv failed", entry("RC=%d", rc),
	entry("ERRNO=%d", e));
	status = ResponseStatus::failure;

	responseMsg = nullptr;
	}

	cleanupCmd();

	// Can't use this instance ID anymore.
	_instanceID = std::nullopt;

	if (status == ResponseStatus::success)
	{
	uint8_t completionCode = 0;
	auto response = reinterpret_cast<pldm_msg*>(responseMsg);

	auto decodeRC = decode_new_file_resp(response, PLDM_NEW_FILE_RESP_BYTES,
	&completionCode);
	if (decodeRC < 0)
	{
	log<level::ERR>("decode_new_file_resp failed",
	entry("RC=%d", decodeRC));
	status = ResponseStatus::failure;
	}
	else
	{
	if (completionCode != PLDM_SUCCESS)
	{
	log<level::ERR>("Bad PLDM completion code",
	entry("COMPLETION_CODE=%d", completionCode));
	status = ResponseStatus::failure;
	}
	}
	}

	callResponseFunc(status);

	if (responseMsg)
	{
	free(responseMsg);
	}
	}

	void PLDMInterface::receiveTimerExpired()
	{
	log<level::ERR>("Timed out waiting for PLDM response");

	// Cleanup, but keep the instance ID because the host didn't
	// respond so we can still use it.
	cleanupCmd();

	callResponseFunc(ResponseStatus::failure);
	}

	void PLDMInterface::cancelCmd()
	{
	_instanceID = std::nullopt;
	cleanupCmd();
	}

	void PLDMInterface::cleanupCmd()
	{
	_inProgress = false;
	_source.reset();

	if (_receiveTimer.isEnabled())
	{
	_receiveTimer.setEnabled(false);
	}

	closeFD();
	}

	} // namespace openpower::pels