blob: a3127fb896d1ea442b09f875cb31826105a340f6 [file] [log] [blame]
#include "pel_values.hpp"
#include <algorithm>
namespace openpower
{
namespace pels
{
namespace pel_values
{
// Note: The description fields will be filled in as part of the
// PEL parser work.
/**
* The possible values for the subsystem field in the User Header.
*/
const PELValues subsystemValues = {{0x10, "processor", "TODO"},
{0x11, "processor_fru", "TODO"},
{0x12, "processor_chip", "TODO"},
{0x13, "processor_unit", "TODO"},
{0x14, "processor_bus", "TODO"},
{0x20, "memory", "TODO"},
{0x21, "memory_ctlr", "TODO"},
{0x22, "memory_bus", "TODO"},
{0x23, "memory_dimm", "TODO"},
{0x24, "memory_fru", "TODO"},
{0x25, "external_cache", "TODO"},
{0x30, "io", "TODO"},
{0x31, "io_hub", "TODO"},
{0x32, "io_bridge", "TODO"},
{0x33, "io_bus", "TODO"},
{0x34, "io_processor", "TODO"},
{0x35, "io_hub_other", "TODO"},
{0x38, "phb", "TODO"},
{0x40, "io_adapter", "TODO"},
{0x41, "io_adapter_comm", "TODO"},
{0x46, "io_device", "TODO"},
{0x47, "io_device_dasd", "TODO"},
{0x4C, "io_external_general", "TODO"},
{0x4D, "io_external_workstation", "TODO"},
{0x4E, "io_storage_mezz", "TODO"},
{0x50, "cec_hardware", "TODO"},
{0x51, "cec_sp_a", "TODO"},
{0x52, "cec_sp_b", "TODO"},
{0x53, "cec_node_controller", "TODO"},
{0x55, "cec_vpd", "TODO"},
{0x56, "cec_i2c", "TODO"},
{0x57, "cec_chip_iface", "TODO"},
{0x58, "cec_clocks", "TODO"},
{0x59, "cec_op_panel", "TODO"},
{0x5A, "cec_tod", "TODO"},
{0x5B, "cec_storage_device", "TODO"},
{0x5C, "cec_sp_hyp_iface", "TODO"},
{0x5D, "cec_service_network", "TODO"},
{0x5E, "cec_sp_hostboot_iface", "TODO"},
{0x60, "power", "TODO"},
{0x61, "power_supply", "TODO"},
{0x62, "power_control_hw", "TODO"},
{0x63, "power_fans", "TODO"},
{0x64, "power_sequencer", "TODO"},
{0x70, "others", "TODO"},
{0x71, "other_hmc", "TODO"},
{0x72, "other_test_tool", "TODO"},
{0x73, "other_media", "TODO"},
{0x74, "other_multiple_subsystems", "TODO"},
{0x75, "other_na", "TODO"},
{0x76, "other_info_src", "TODO"},
{0x7A, "surv_hyp_lost_sp", "TODO"},
{0x7B, "surv_sp_lost_hyp", "TODO"},
{0x7C, "surv_sp_lost_hmc", "TODO"},
{0x7D, "surv_hmc_lost_lpar", "TODO"},
{0x7E, "surv_hmc_lost_bpa", "TODO"},
{0x7F, "surv_hmc_lost_hmc", "TODO"},
{0x80, "platform_firmware", "TODO"},
{0x81, "sp_firmware", "TODO"},
{0x82, "hyp_firmware", "TODO"},
{0x83, "partition_firmware", "TODO"},
{0x84, "slic_firmware", "TODO"},
{0x85, "spcn_firmware", "TODO"},
{0x86, "bulk_power_firmware_side_a", "TODO"},
{0x87, "hmc_code_firmware", "TODO"},
{0x88, "bulk_power_firmware_side_b", "TODO"},
{0x89, "virtual_sp", "TODO"},
{0x8A, "hostboot", "TODO"},
{0x8B, "occ", "TODO"},
{0x8D, "bmc_firmware", "TODO"},
{0x90, "software", "TODO"},
{0x91, "os_software", "TODO"},
{0x92, "xpf_software", "TODO"},
{0x93, "app_software", "TODO"},
{0xA0, "ext_env", "TODO"},
{0xA1, "input_power_source", "TODO"},
{0xA2, "ambient_temp", "TODO"},
{0xA3, "user_error", "TODO"},
{0xA4, "corrosion", "TODO"}};
/**
* The possible values for the severity field in the User Header.
*/
const PELValues severityValues = {
{0x00, "non_error", "TODO"},
{0x10, "recovered", "TODO"},
{0x20, "predictive", "TODO"},
{0x21, "predictive_degraded_perf", "TODO"},
{0x22, "predictive_reboot", "TODO"},
{0x23, "predictive_reboot_degraded", "TODO"},
{0x24, "predictive_redundancy_loss", "TODO"},
{0x40, "unrecoverable", "TODO"},
{0x41, "unrecoverable_degraded_perf", "TODO"},
{0x44, "unrecoverable_redundancy_loss", "TODO"},
{0x45, "unrecoverable_redundancy_loss_perf", "TODO"},
{0x48, "unrecoverable_loss_of_function", "TODO"},
{0x50, "critical", "TODO"},
{0x51, "critical_system_term", "TODO"},
{0x52, "critical_imminent_failure", "TODO"},
{0x53, "critical_partition_term", "TODO"},
{0x54, "critical_partition_imminent_failure", "TODO"},
{0x60, "diagnostic_error", "TODO"},
{0x61, "diagnostic_error_incorrect_results", "TODO"},
{0x71, "symptom_recovered", "TODO"},
{0x72, "symptom_predictive", "TODO"},
{0x74, "symptom_unrecoverable", "TODO"},
{0x75, "symptom_critical", "TODO"},
{0x76, "symptom_diag_err", "TODO"}};
/**
* The possible values for the Event Type field in the User Header.
*/
const PELValues eventTypeValues = {{0x00, "na", "TODO"},
{0x01, "misc_information_only", "TODO"},
{0x02, "tracing_event", "TODO"},
{0x08, "dump_notification", "TODO"}};
/**
* The possible values for the Event Scope field in the User Header.
*/
const PELValues eventScopeValues = {
{0x01, "single_partition", "TODO"},
{0x02, "multiple_partitions", "TODO"},
{0x03, "entire_platform", "TODO"},
{0x04, "possibly_multiple_platforms", "TODO"}};
/**
* The possible values for the Action Flags field in the User Header.
*/
const PELValues actionFlagsValues = {
{0x8000, "service_action", "TODO"}, {0x4000, "hidden", "TODO"},
{0x2000, "report", "TODO"}, {0x1000, "dont_report", "TODO"},
{0x0800, "call_home", "TODO"}, {0x0100, "termination", "TODO"}};
/**
* The possible values for the Callout Priority field in the SRC.
*/
const PELValues calloutPriorityValues = {
{'H', "high", "TODO"}, {'M', "medium", "TODO"},
{'A', "medium_group_a", "TODO"}, {'B', "medium_group_b", "TODO"},
{'C', "medium_group_c", "TODO"}, {'L', "low", "TODO"}};
PELValues::const_iterator findByValue(uint32_t value, const PELValues& fields)
{
return std::find_if(fields.begin(), fields.end(),
[value](const auto& entry) {
return value == std::get<fieldValuePos>(entry);
});
}
PELValues::const_iterator findByName(const std::string& name,
const PELValues& fields)
{
return std::find_if(fields.begin(), fields.end(),
[&name](const auto& entry) {
return name == std::get<registryNamePos>(entry);
});
}
} // namespace pel_values
} // namespace pels
} // namespace openpower