extensions/openpower-pels/manager.cpp - openbmc/phosphor-logging - Gitiles

 /**
  * Copyright © 2019 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "manager.hpp"

 #include "additional_data.hpp"
 #include "json_utils.hpp"
 #include "pel.hpp"
 #include "service_indicators.hpp"

 #include <fmt/format.h>
 #include <sys/inotify.h>
 #include <unistd.h>

 #include <filesystem>
 #include <fstream>
 #include <xyz/openbmc_project/Common/error.hpp>
 #include <xyz/openbmc_project/Logging/Create/server.hpp>

 namespace openpower
 {
 namespace pels
 {

 using namespace phosphor::logging;
 namespace fs = std::filesystem;
 namespace rg = openpower::pels::message;

 namespace common_error = sdbusplus::xyz::openbmc_project::Common::Error;

 using Create = sdbusplus::xyz::openbmc_project::Logging::server::Create;

 namespace additional_data
 {
 constexpr auto rawPEL = "RAWPEL";
 constexpr auto esel = "ESEL";
 constexpr auto error = "ERROR_NAME";
 } // namespace additional_data

 constexpr auto defaultLogMessage = "xyz.openbmc_project.Logging.Error.Default";

 Manager::~Manager()
 {
     if (_pelFileDeleteFD != -1)
     {
         if (_pelFileDeleteWatchFD != -1)
         {
             inotify_rm_watch(_pelFileDeleteFD, _pelFileDeleteWatchFD);
         }
         close(_pelFileDeleteFD);
     }
 }

 void Manager::create(const std::string& message, uint32_t obmcLogID,
                      uint64_t timestamp, Entry::Level severity,
                      const std::vector<std::string>& additionalData,
                      const std::vector<std::string>& associations,
                      const FFDCEntries& ffdc)
 {
     AdditionalData ad{additionalData};

     // If a PEL was passed in via a filename or in an ESEL,
     // use that.  Otherwise, create one.
     auto rawPelPath = ad.getValue(additional_data::rawPEL);
     if (rawPelPath)
     {
         addRawPEL(*rawPelPath, obmcLogID);
     }
     else
     {
         auto esel = ad.getValue(additional_data::esel);
         if (esel)
         {
             addESELPEL(*esel, obmcLogID);
         }
         else
         {
             createPEL(message, obmcLogID, timestamp, severity, additionalData,
                       associations, ffdc);
         }
     }
 }

 void Manager::addRawPEL(const std::string& rawPelPath, uint32_t obmcLogID)
 {
     if (fs::exists(rawPelPath))
     {
         std::ifstream file(rawPelPath, std::ios::in | std::ios::binary);

         auto data = std::vector<uint8_t>(std::istreambuf_iterator<char>(file),
                                          std::istreambuf_iterator<char>());
         if (file.fail())
         {
             log<level::ERR>("Filesystem error reading a raw PEL",
                             entry("PELFILE=%s", rawPelPath.c_str()),
                             entry("OBMCLOGID=%d", obmcLogID));
             // TODO, Decide what to do here. Maybe nothing.
             return;
         }

         file.close();

         addPEL(data, obmcLogID);
     }
     else
     {
         log<level::ERR>("Raw PEL file from BMC event log does not exist",
                         entry("PELFILE=%s", (rawPelPath).c_str()),
                         entry("OBMCLOGID=%d", obmcLogID));
     }
 }

 void Manager::addPEL(std::vector<uint8_t>& pelData, uint32_t obmcLogID)
 {

     auto pel = std::make_unique<openpower::pels::PEL>(pelData, obmcLogID);
     if (pel->valid())
     {
         // PELs created by others still need these fields set by us.
         pel->assignID();
         pel->setCommitTime();

         try
         {
             log<level::INFO>(
                 fmt::format("Adding external PEL {:#x} (BMC ID {}) to repo",
                             pel->id(), obmcLogID)
                     .c_str());

             _repo.add(pel);

             if (_repo.sizeWarning())
             {
                 scheduleRepoPrune();
             }

             // Activate any resulting service indicators if necessary
             auto policy = service_indicators::getPolicy(*_dataIface);
             policy->activate(*pel);
         }
         catch (std::exception& e)
         {
             // Probably a full or r/o filesystem, not much we can do.
             log<level::ERR>("Unable to add PEL to Repository",
                             entry("PEL_ID=0x%X", pel->id()));
         }
     }
     else
     {
         log<level::ERR>("Invalid PEL received from the host",
                         entry("OBMCLOGID=%d", obmcLogID));

         AdditionalData ad;
         ad.add("PLID", getNumberString("0x%08X", pel->plid()));
         ad.add("OBMC_LOG_ID", std::to_string(obmcLogID));
         ad.add("PEL_SIZE", std::to_string(pelData.size()));

         std::string asciiString;
         auto src = pel->primarySRC();
         if (src)
         {
             asciiString = (*src)->asciiString();
         }

         ad.add("SRC", asciiString);

         _eventLogger.log("org.open_power.Logging.Error.BadHostPEL",
                          Entry::Level::Error, ad);

         // Save it to a file for debug in the lab.  Just keep the latest.
         // Not adding it to the PEL because it could already be max size
         // and don't want to truncate an already invalid PEL.
         std::ofstream pelFile{getPELRepoPath() / "badPEL"};
         pelFile.write(reinterpret_cast<const char*>(pelData.data()),
                       pelData.size());
     }
 }

 void Manager::addESELPEL(const std::string& esel, uint32_t obmcLogID)
 {
     std::vector<uint8_t> data;

     log<level::DEBUG>("Adding PEL from ESEL",
                       entry("OBMC_LOG_ID=%d", obmcLogID));

     try
     {
         data = std::move(eselToRawData(esel));
     }
     catch (std::exception& e)
     {
         // Try to add it below anyway, so it follows the usual bad data path.
         log<level::ERR>("Problems converting ESEL string to a byte vector");
     }

     addPEL(data, obmcLogID);
 }

 std::vector<uint8_t> Manager::eselToRawData(const std::string& esel)
 {
     std::vector<uint8_t> data;
     std::string byteString;

     // As the eSEL string looks like: "50 48 00 ab ..." there are 3
     // characters per raw byte, and since the actual PEL data starts
     // at the 16th byte, the code will grab the PEL data starting at
     // offset 48 in the string.
     static constexpr size_t pelStart = 16 * 3;

     if (esel.size() <= pelStart)
     {
         log<level::ERR>("ESEL data too short",
                         entry("ESEL_SIZE=%d", esel.size()));

         throw std::length_error("ESEL data too short");
     }

     for (size_t i = pelStart; i < esel.size(); i += 3)
     {
         if (i + 1 < esel.size())
         {
             byteString = esel.substr(i, 2);
             data.push_back(std::stoi(byteString, nullptr, 16));
         }
         else
         {
             log<level::ERR>("ESEL data too short",
                             entry("ESEL_SIZE=%d", esel.size()));
             throw std::length_error("ESEL data too short");
         }
     }

     return data;
 }

 void Manager::erase(uint32_t obmcLogID)
 {
     Repository::LogID id{Repository::LogID::Obmc(obmcLogID)};

     _repo.remove(id);
 }

 bool Manager::isDeleteProhibited(uint32_t obmcLogID)
 {
     return false;
 }

 PelFFDC Manager::convertToPelFFDC(const FFDCEntries& ffdc)
 {
     PelFFDC pelFFDC;

     std::for_each(ffdc.begin(), ffdc.end(), [&pelFFDC](const auto& f) {
         PelFFDCfile pf;
         pf.subType = std::get<ffdcSubtypePos>(f);
         pf.version = std::get<ffdcVersionPos>(f);
         pf.fd = std::get<ffdcFDPos>(f);

         switch (std::get<ffdcFormatPos>(f))
         {
             case Create::FFDCFormat::JSON:
                 pf.format = UserDataFormat::json;
                 break;
             case Create::FFDCFormat::CBOR:
                 pf.format = UserDataFormat::cbor;
                 break;
             case Create::FFDCFormat::Text:
                 pf.format = UserDataFormat::text;
                 break;
             case Create::FFDCFormat::Custom:
                 pf.format = UserDataFormat::custom;
                 break;
         }

         pelFFDC.push_back(pf);
     });

     return pelFFDC;
 }

 void Manager::createPEL(const std::string& message, uint32_t obmcLogID,
                         uint64_t timestamp,
                         phosphor::logging::Entry::Level severity,
                         const std::vector<std::string>& additionalData,
                         const std::vector<std::string>& associations,
                         const FFDCEntries& ffdc)
 {
     auto entry = _registry.lookup(message, rg::LookupType::name);
     auto pelFFDC = convertToPelFFDC(ffdc);
     AdditionalData ad{additionalData};
     std::string msg;

     if (!entry)
     {
         // Instead, get the default entry that means there is no
         // other matching entry.  This error will still use the
         // AdditionalData values of the original error, and this
         // code will add the error message value that wasn't found
         // to this AD.  This way, there will at least be a PEL,
         // possibly with callouts, to allow users to debug the
         // issue that caused the error even without its own PEL.
         msg = "Event not found in PEL message registry: " + message;
         log<level::INFO>(msg.c_str());

         entry = _registry.lookup(defaultLogMessage, rg::LookupType::name);
         if (!entry)
         {
             log<level::ERR>("Default event not found in PEL message registry");
             return;
         }

         ad.add(additional_data::error, message);
     }

     auto pel = std::make_unique<openpower::pels::PEL>(
         *entry, obmcLogID, timestamp, severity, ad, pelFFDC, *_dataIface);

     _repo.add(pel);

     if (_repo.sizeWarning())
     {
         scheduleRepoPrune();
     }

     auto src = pel->primarySRC();
     if (src)
     {
         auto msg =
             fmt::format("Created PEL {:#x} (BMC ID {}) with SRC {}", pel->id(),
                         pel->obmcLogID(), (*src)->asciiString());
         while (msg.back() == ' ')
         {
             msg.pop_back();
         }
         log<level::INFO>(msg.c_str());
     }

     // Activate any resulting service indicators if necessary
     auto policy = service_indicators::getPolicy(*_dataIface);
     policy->activate(*pel);
 }

 sdbusplus::message::unix_fd Manager::getPEL(uint32_t pelID)
 {
     Repository::LogID id{Repository::LogID::Pel(pelID)};
     std::optional<int> fd;

     log<level::DEBUG>("getPEL", entry("PEL_ID=0x%X", pelID));

     try
     {
         fd = _repo.getPELFD(id);
     }
     catch (std::exception& e)
     {
         throw common_error::InternalFailure();
     }

     if (!fd)
     {
         throw common_error::InvalidArgument();
     }

     scheduleFDClose(*fd);

     return *fd;
 }

 void Manager::scheduleFDClose(int fd)
 {
     _fdCloserEventSource = std::make_unique<sdeventplus::source::Defer>(
         _event, std::bind(std::mem_fn(&Manager::closeFD), this, fd,
                           std::placeholders::_1));
 }

 void Manager::closeFD(int fd, sdeventplus::source::EventBase& source)
 {
     close(fd);
     _fdCloserEventSource.reset();
 }

 std::vector<uint8_t> Manager::getPELFromOBMCID(uint32_t obmcLogID)
 {
     Repository::LogID id{Repository::LogID::Obmc(obmcLogID)};
     std::optional<std::vector<uint8_t>> data;

     log<level::DEBUG>("getPELFromOBMCID", entry("OBMC_LOG_ID=%d", obmcLogID));

     try
     {
         data = _repo.getPELData(id);
     }
     catch (std::exception& e)
     {
         throw common_error::InternalFailure();
     }

     if (!data)
     {
         throw common_error::InvalidArgument();
     }

     return *data;
 }

 void Manager::hostAck(uint32_t pelID)
 {
     Repository::LogID id{Repository::LogID::Pel(pelID)};

     log<level::DEBUG>("HostAck", entry("PEL_ID=0x%X", pelID));

     if (!_repo.hasPEL(id))
     {
         throw common_error::InvalidArgument();
     }

     if (_hostNotifier)
     {
         _hostNotifier->ackPEL(pelID);
     }
 }

 void Manager::hostReject(uint32_t pelID, RejectionReason reason)
 {
     Repository::LogID id{Repository::LogID::Pel(pelID)};

     log<level::DEBUG>("HostReject", entry("PEL_ID=0x%X", pelID),
                       entry("REASON=%d", static_cast<int>(reason)));

     if (!_repo.hasPEL(id))
     {
         throw common_error::InvalidArgument();
     }

     if (reason == RejectionReason::BadPEL)
     {
         AdditionalData data;
         data.add("BAD_ID", getNumberString("0x%08X", pelID));
         _eventLogger.log("org.open_power.Logging.Error.SentBadPELToHost",
                          Entry::Level::Informational, data);
         if (_hostNotifier)
         {
             _hostNotifier->setBadPEL(pelID);
         }
     }
     else if ((reason == RejectionReason::HostFull) && _hostNotifier)
     {
         _hostNotifier->setHostFull(pelID);
     }
 }

 void Manager::scheduleRepoPrune()
 {
     _repoPrunerEventSource = std::make_unique<sdeventplus::source::Defer>(
         _event, std::bind(std::mem_fn(&Manager::pruneRepo), this,
                           std::placeholders::_1));
 }

 void Manager::pruneRepo(sdeventplus::source::EventBase& source)
 {
     auto idsToDelete = _repo.prune();

     // Remove the OpenBMC event logs for the PELs that were just removed.
     std::for_each(idsToDelete.begin(), idsToDelete.end(),
                   [this](auto id) { this->_logManager.erase(id); });

     _repoPrunerEventSource.reset();
 }

 void Manager::setupPELDeleteWatch()
 {
     _pelFileDeleteFD = inotify_init1(IN_NONBLOCK);
     if (-1 == _pelFileDeleteFD)
     {
         auto e = errno;
         std::string msg =
             "inotify_init1 failed with errno " + std::to_string(e);
         log<level::ERR>(msg.c_str());
         abort();
     }

     _pelFileDeleteWatchFD = inotify_add_watch(
         _pelFileDeleteFD, _repo.repoPath().c_str(), IN_DELETE);
     if (-1 == _pelFileDeleteWatchFD)
     {
         auto e = errno;
         std::string msg =
             "inotify_add_watch failed with error " + std::to_string(e);
         log<level::ERR>(msg.c_str());
         abort();
     }

     _pelFileDeleteEventSource = std::make_unique<sdeventplus::source::IO>(
         _event, _pelFileDeleteFD, EPOLLIN,
         std::bind(std::mem_fn(&Manager::pelFileDeleted), this,
                   std::placeholders::_1, std::placeholders::_2,
                   std::placeholders::_3));
 }

 void Manager::pelFileDeleted(sdeventplus::source::IO& io, int fd,
                              uint32_t revents)
 {
     if (!(revents & EPOLLIN))
     {
         return;
     }

     // An event for 1 PEL uses 48B. When all PELs are deleted at once,
     // as many events as there is room for can be handled in one callback.
     // A size of 2000 will allow 41 to be processed, with additional
     // callbacks being needed to process the remaining ones.
     std::array<uint8_t, 2000> data;
     auto bytesRead = read(_pelFileDeleteFD, data.data(), data.size());
     if (bytesRead < 0)
     {
         auto e = errno;
         std::string msg = "Failed reading data from inotify event, errno = " +
                           std::to_string(e);
         log<level::ERR>(msg.c_str());
         abort();
     }

     auto offset = 0;
     while (offset < bytesRead)
     {
         auto event = reinterpret_cast<inotify_event*>(&data[offset]);
         if (event->mask & IN_DELETE)
         {
             std::string filename{event->name};

             // Get the PEL ID from the filename and tell the
             // repo it's been removed, and then delete the BMC
             // event log if it's there.
             auto pos = filename.find_first_of('_');
             if (pos != std::string::npos)
             {
                 try
                 {
                     auto idString = filename.substr(pos + 1);
                     auto pelID = std::stoul(idString, nullptr, 16);

                     Repository::LogID id{Repository::LogID::Pel(pelID)};
                     auto removedLogID = _repo.remove(id);
                     if (removedLogID)
                     {
                         _logManager.erase(removedLogID->obmcID.id);
                     }
                 }
                 catch (const std::exception& e)
                 {
                     log<level::INFO>("Could not find PEL ID from its filename",
                                      entry("FILENAME=%s", filename.c_str()));
                 }
             }
         }

         offset += offsetof(inotify_event, name) + event->len;
     }
 }

 std::tuple<uint32_t, uint32_t> Manager::createPELWithFFDCFiles(
     std::string message, Entry::Level severity,
     std::map<std::string, std::string> additionalData,
     std::vector<std::tuple<
         sdbusplus::xyz::openbmc_project::Logging::server::Create::FFDCFormat,
         uint8_t, uint8_t, sdbusplus::message::unix_fd>>
         fFDC)
 {
     return {0, 0};
 }

 } // namespace pels
 } // namespace openpower
	/**
	* Copyright © 2019 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "manager.hpp"

	#include "additional_data.hpp"
	#include "json_utils.hpp"
	#include "pel.hpp"
	#include "service_indicators.hpp"

	#include <fmt/format.h>
	#include <sys/inotify.h>
	#include <unistd.h>

	#include <filesystem>
	#include <fstream>
	#include <xyz/openbmc_project/Common/error.hpp>
	#include <xyz/openbmc_project/Logging/Create/server.hpp>

	namespace openpower
	{
	namespace pels
	{

	using namespace phosphor::logging;
	namespace fs = std::filesystem;
	namespace rg = openpower::pels::message;

	namespace common_error = sdbusplus::xyz::openbmc_project::Common::Error;

	using Create = sdbusplus::xyz::openbmc_project::Logging::server::Create;

	namespace additional_data
	{
	constexpr auto rawPEL = "RAWPEL";
	constexpr auto esel = "ESEL";
	constexpr auto error = "ERROR_NAME";
	} // namespace additional_data

	constexpr auto defaultLogMessage = "xyz.openbmc_project.Logging.Error.Default";

	Manager::~Manager()
	{
	if (_pelFileDeleteFD != -1)
	{
	if (_pelFileDeleteWatchFD != -1)
	{
	inotify_rm_watch(_pelFileDeleteFD, _pelFileDeleteWatchFD);
	}
	close(_pelFileDeleteFD);
	}
	}

	void Manager::create(const std::string& message, uint32_t obmcLogID,
	uint64_t timestamp, Entry::Level severity,
	const std::vector<std::string>& additionalData,
	const std::vector<std::string>& associations,
	const FFDCEntries& ffdc)
	{
	AdditionalData ad{additionalData};

	// If a PEL was passed in via a filename or in an ESEL,
	// use that. Otherwise, create one.
	auto rawPelPath = ad.getValue(additional_data::rawPEL);
	if (rawPelPath)
	{
	addRawPEL(*rawPelPath, obmcLogID);
	}
	else
	{
	auto esel = ad.getValue(additional_data::esel);
	if (esel)
	{
	addESELPEL(*esel, obmcLogID);
	}
	else
	{
	createPEL(message, obmcLogID, timestamp, severity, additionalData,
	associations, ffdc);
	}
	}
	}

	void Manager::addRawPEL(const std::string& rawPelPath, uint32_t obmcLogID)
	{
	if (fs::exists(rawPelPath))
	{
	std::ifstream file(rawPelPath, std::ios::in \| std::ios::binary);

	auto data = std::vector<uint8_t>(std::istreambuf_iterator<char>(file),
	std::istreambuf_iterator<char>());
	if (file.fail())
	{
	log<level::ERR>("Filesystem error reading a raw PEL",
	entry("PELFILE=%s", rawPelPath.c_str()),
	entry("OBMCLOGID=%d", obmcLogID));
	// TODO, Decide what to do here. Maybe nothing.
	return;
	}

	file.close();

	addPEL(data, obmcLogID);
	}
	else
	{
	log<level::ERR>("Raw PEL file from BMC event log does not exist",
	entry("PELFILE=%s", (rawPelPath).c_str()),
	entry("OBMCLOGID=%d", obmcLogID));
	}
	}

	void Manager::addPEL(std::vector<uint8_t>& pelData, uint32_t obmcLogID)
	{

	auto pel = std::make_unique<openpower::pels::PEL>(pelData, obmcLogID);
	if (pel->valid())
	{
	// PELs created by others still need these fields set by us.
	pel->assignID();
	pel->setCommitTime();

	try
	{
	log<level::INFO>(
	fmt::format("Adding external PEL {:#x} (BMC ID {}) to repo",
	pel->id(), obmcLogID)
	.c_str());

	_repo.add(pel);

	if (_repo.sizeWarning())
	{
	scheduleRepoPrune();
	}

	// Activate any resulting service indicators if necessary
	auto policy = service_indicators::getPolicy(*_dataIface);
	policy->activate(*pel);
	}
	catch (std::exception& e)
	{
	// Probably a full or r/o filesystem, not much we can do.
	log<level::ERR>("Unable to add PEL to Repository",
	entry("PEL_ID=0x%X", pel->id()));
	}
	}
	else
	{
	log<level::ERR>("Invalid PEL received from the host",
	entry("OBMCLOGID=%d", obmcLogID));

	AdditionalData ad;
	ad.add("PLID", getNumberString("0x%08X", pel->plid()));
	ad.add("OBMC_LOG_ID", std::to_string(obmcLogID));
	ad.add("PEL_SIZE", std::to_string(pelData.size()));

	std::string asciiString;
	auto src = pel->primarySRC();
	if (src)
	{
	asciiString = (*src)->asciiString();
	}

	ad.add("SRC", asciiString);

	_eventLogger.log("org.open_power.Logging.Error.BadHostPEL",
	Entry::Level::Error, ad);

	// Save it to a file for debug in the lab. Just keep the latest.
	// Not adding it to the PEL because it could already be max size
	// and don't want to truncate an already invalid PEL.
	std::ofstream pelFile{getPELRepoPath() / "badPEL"};
	pelFile.write(reinterpret_cast<const char*>(pelData.data()),
	pelData.size());
	}
	}

	void Manager::addESELPEL(const std::string& esel, uint32_t obmcLogID)
	{
	std::vector<uint8_t> data;

	log<level::DEBUG>("Adding PEL from ESEL",
	entry("OBMC_LOG_ID=%d", obmcLogID));

	try
	{
	data = std::move(eselToRawData(esel));
	}
	catch (std::exception& e)
	{
	// Try to add it below anyway, so it follows the usual bad data path.
	log<level::ERR>("Problems converting ESEL string to a byte vector");
	}

	addPEL(data, obmcLogID);
	}

	std::vector<uint8_t> Manager::eselToRawData(const std::string& esel)
	{
	std::vector<uint8_t> data;
	std::string byteString;

	// As the eSEL string looks like: "50 48 00 ab ..." there are 3
	// characters per raw byte, and since the actual PEL data starts
	// at the 16th byte, the code will grab the PEL data starting at
	// offset 48 in the string.
	static constexpr size_t pelStart = 16 * 3;

	if (esel.size() <= pelStart)
	{
	log<level::ERR>("ESEL data too short",
	entry("ESEL_SIZE=%d", esel.size()));

	throw std::length_error("ESEL data too short");
	}

	for (size_t i = pelStart; i < esel.size(); i += 3)
	{
	if (i + 1 < esel.size())
	{
	byteString = esel.substr(i, 2);
	data.push_back(std::stoi(byteString, nullptr, 16));
	}
	else
	{
	log<level::ERR>("ESEL data too short",
	entry("ESEL_SIZE=%d", esel.size()));
	throw std::length_error("ESEL data too short");
	}
	}

	return data;
	}

	void Manager::erase(uint32_t obmcLogID)
	{
	Repository::LogID id{Repository::LogID::Obmc(obmcLogID)};

	_repo.remove(id);
	}

	bool Manager::isDeleteProhibited(uint32_t obmcLogID)
	{
	return false;
	}

	PelFFDC Manager::convertToPelFFDC(const FFDCEntries& ffdc)
	{
	PelFFDC pelFFDC;

	std::for_each(ffdc.begin(), ffdc.end(), [&pelFFDC](const auto& f) {
	PelFFDCfile pf;
	pf.subType = std::get<ffdcSubtypePos>(f);
	pf.version = std::get<ffdcVersionPos>(f);
	pf.fd = std::get<ffdcFDPos>(f);

	switch (std::get<ffdcFormatPos>(f))
	{
	case Create::FFDCFormat::JSON:
	pf.format = UserDataFormat::json;
	break;
	case Create::FFDCFormat::CBOR:
	pf.format = UserDataFormat::cbor;
	break;
	case Create::FFDCFormat::Text:
	pf.format = UserDataFormat::text;
	break;
	case Create::FFDCFormat::Custom:
	pf.format = UserDataFormat::custom;
	break;
	}

	pelFFDC.push_back(pf);
	});

	return pelFFDC;
	}

	void Manager::createPEL(const std::string& message, uint32_t obmcLogID,
	uint64_t timestamp,
	phosphor::logging::Entry::Level severity,
	const std::vector<std::string>& additionalData,
	const std::vector<std::string>& associations,
	const FFDCEntries& ffdc)
	{
	auto entry = _registry.lookup(message, rg::LookupType::name);
	auto pelFFDC = convertToPelFFDC(ffdc);
	AdditionalData ad{additionalData};
	std::string msg;

	if (!entry)
	{
	// Instead, get the default entry that means there is no
	// other matching entry. This error will still use the
	// AdditionalData values of the original error, and this
	// code will add the error message value that wasn't found
	// to this AD. This way, there will at least be a PEL,
	// possibly with callouts, to allow users to debug the
	// issue that caused the error even without its own PEL.
	msg = "Event not found in PEL message registry: " + message;
	log<level::INFO>(msg.c_str());

	entry = _registry.lookup(defaultLogMessage, rg::LookupType::name);
	if (!entry)
	{
	log<level::ERR>("Default event not found in PEL message registry");
	return;
	}

	ad.add(additional_data::error, message);
	}

	auto pel = std::make_unique<openpower::pels::PEL>(
	entry, obmcLogID, timestamp, severity, ad, pelFFDC, _dataIface);

	_repo.add(pel);

	if (_repo.sizeWarning())
	{
	scheduleRepoPrune();
	}

	auto src = pel->primarySRC();
	if (src)
	{
	auto msg =
	fmt::format("Created PEL {:#x} (BMC ID {}) with SRC {}", pel->id(),
	pel->obmcLogID(), (*src)->asciiString());
	while (msg.back() == ' ')
	{
	msg.pop_back();
	}
	log<level::INFO>(msg.c_str());
	}

	// Activate any resulting service indicators if necessary
	auto policy = service_indicators::getPolicy(*_dataIface);
	policy->activate(*pel);
	}

	sdbusplus::message::unix_fd Manager::getPEL(uint32_t pelID)
	{
	Repository::LogID id{Repository::LogID::Pel(pelID)};
	std::optional<int> fd;

	log<level::DEBUG>("getPEL", entry("PEL_ID=0x%X", pelID));

	try
	{
	fd = _repo.getPELFD(id);
	}
	catch (std::exception& e)
	{
	throw common_error::InternalFailure();
	}

	if (!fd)
	{
	throw common_error::InvalidArgument();
	}

	scheduleFDClose(*fd);

	return *fd;
	}

	void Manager::scheduleFDClose(int fd)
	{
	_fdCloserEventSource = std::make_unique<sdeventplus::source::Defer>(
	_event, std::bind(std::mem_fn(&Manager::closeFD), this, fd,
	std::placeholders::_1));
	}

	void Manager::closeFD(int fd, sdeventplus::source::EventBase& source)
	{
	close(fd);
	_fdCloserEventSource.reset();
	}

	std::vector<uint8_t> Manager::getPELFromOBMCID(uint32_t obmcLogID)
	{
	Repository::LogID id{Repository::LogID::Obmc(obmcLogID)};
	std::optional<std::vector<uint8_t>> data;

	log<level::DEBUG>("getPELFromOBMCID", entry("OBMC_LOG_ID=%d", obmcLogID));

	try
	{
	data = _repo.getPELData(id);
	}
	catch (std::exception& e)
	{
	throw common_error::InternalFailure();
	}

	if (!data)
	{
	throw common_error::InvalidArgument();
	}

	return *data;
	}

	void Manager::hostAck(uint32_t pelID)
	{
	Repository::LogID id{Repository::LogID::Pel(pelID)};

	log<level::DEBUG>("HostAck", entry("PEL_ID=0x%X", pelID));

	if (!_repo.hasPEL(id))
	{
	throw common_error::InvalidArgument();
	}

	if (_hostNotifier)
	{
	_hostNotifier->ackPEL(pelID);
	}
	}

	void Manager::hostReject(uint32_t pelID, RejectionReason reason)
	{
	Repository::LogID id{Repository::LogID::Pel(pelID)};

	log<level::DEBUG>("HostReject", entry("PEL_ID=0x%X", pelID),
	entry("REASON=%d", static_cast<int>(reason)));

	if (!_repo.hasPEL(id))
	{
	throw common_error::InvalidArgument();
	}

	if (reason == RejectionReason::BadPEL)
	{
	AdditionalData data;
	data.add("BAD_ID", getNumberString("0x%08X", pelID));
	_eventLogger.log("org.open_power.Logging.Error.SentBadPELToHost",
	Entry::Level::Informational, data);
	if (_hostNotifier)
	{
	_hostNotifier->setBadPEL(pelID);
	}
	}
	else if ((reason == RejectionReason::HostFull) && _hostNotifier)
	{
	_hostNotifier->setHostFull(pelID);
	}
	}

	void Manager::scheduleRepoPrune()
	{
	_repoPrunerEventSource = std::make_unique<sdeventplus::source::Defer>(
	_event, std::bind(std::mem_fn(&Manager::pruneRepo), this,
	std::placeholders::_1));
	}

	void Manager::pruneRepo(sdeventplus::source::EventBase& source)
	{
	auto idsToDelete = _repo.prune();

	// Remove the OpenBMC event logs for the PELs that were just removed.
	std::for_each(idsToDelete.begin(), idsToDelete.end(),
	[this](auto id) { this->_logManager.erase(id); });

	_repoPrunerEventSource.reset();
	}

	void Manager::setupPELDeleteWatch()
	{
	_pelFileDeleteFD = inotify_init1(IN_NONBLOCK);
	if (-1 == _pelFileDeleteFD)
	{
	auto e = errno;
	std::string msg =
	"inotify_init1 failed with errno " + std::to_string(e);
	log<level::ERR>(msg.c_str());
	abort();
	}

	_pelFileDeleteWatchFD = inotify_add_watch(
	_pelFileDeleteFD, _repo.repoPath().c_str(), IN_DELETE);
	if (-1 == _pelFileDeleteWatchFD)
	{
	auto e = errno;
	std::string msg =
	"inotify_add_watch failed with error " + std::to_string(e);
	log<level::ERR>(msg.c_str());
	abort();
	}

	_pelFileDeleteEventSource = std::make_unique<sdeventplus::source::IO>(
	_event, _pelFileDeleteFD, EPOLLIN,
	std::bind(std::mem_fn(&Manager::pelFileDeleted), this,
	std::placeholders::_1, std::placeholders::_2,
	std::placeholders::_3));
	}

	void Manager::pelFileDeleted(sdeventplus::source::IO& io, int fd,
	uint32_t revents)
	{
	if (!(revents & EPOLLIN))
	{
	return;
	}

	// An event for 1 PEL uses 48B. When all PELs are deleted at once,
	// as many events as there is room for can be handled in one callback.
	// A size of 2000 will allow 41 to be processed, with additional
	// callbacks being needed to process the remaining ones.
	std::array<uint8_t, 2000> data;
	auto bytesRead = read(_pelFileDeleteFD, data.data(), data.size());
	if (bytesRead < 0)
	{
	auto e = errno;
	std::string msg = "Failed reading data from inotify event, errno = " +
	std::to_string(e);
	log<level::ERR>(msg.c_str());
	abort();
	}

	auto offset = 0;
	while (offset < bytesRead)
	{
	auto event = reinterpret_cast<inotify_event*>(&data[offset]);
	if (event->mask & IN_DELETE)
	{
	std::string filename{event->name};

	// Get the PEL ID from the filename and tell the
	// repo it's been removed, and then delete the BMC
	// event log if it's there.
	auto pos = filename.find_first_of('_');
	if (pos != std::string::npos)
	{
	try
	{
	auto idString = filename.substr(pos + 1);
	auto pelID = std::stoul(idString, nullptr, 16);

	Repository::LogID id{Repository::LogID::Pel(pelID)};
	auto removedLogID = _repo.remove(id);
	if (removedLogID)
	{
	_logManager.erase(removedLogID->obmcID.id);
	}
	}
	catch (const std::exception& e)
	{
	log<level::INFO>("Could not find PEL ID from its filename",
	entry("FILENAME=%s", filename.c_str()));
	}
	}
	}

	offset += offsetof(inotify_event, name) + event->len;
	}
	}

	std::tuple<uint32_t, uint32_t> Manager::createPELWithFFDCFiles(
	std::string message, Entry::Level severity,
	std::map<std::string, std::string> additionalData,
	std::vector<std::tuple<
	sdbusplus::xyz::openbmc_project::Logging::server::Create::FFDCFormat,
	uint8_t, uint8_t, sdbusplus::message::unix_fd>>
	fFDC)
	{
	return {0, 0};
	}

	} // namespace pels
	} // namespace openpower