test/openpower-pels/pel_utils.cpp - openbmc/phosphor-logging - Gitiles

 /**
  * Copyright © 2019 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "pel_utils.hpp"

 #include "extensions/openpower-pels/private_header.hpp"
 #include "extensions/openpower-pels/user_header.hpp"

 #include <fstream>

 #include <gtest/gtest.h>

 namespace fs = std::filesystem;
 using namespace openpower::pels;

 std::filesystem::path CleanLogID::pelIDFile{};
 std::filesystem::path CleanPELFiles::pelIDFile{};
 std::filesystem::path CleanPELFiles::repoPath{};
 std::filesystem::path CleanPELFiles::registryPath{};

 const std::vector<uint8_t> privateHeaderSection{
     // section header
     0x50, 0x48, // ID 'PH'
     0x00, 0x30, // Size
     0x01, 0x02, // version, subtype
     0x03, 0x04, // comp ID

     0x20, 0x30, 0x05, 0x09, 0x11, 0x1E, 0x1,  0x63, // create timestamp
     0x20, 0x31, 0x06, 0x0F, 0x09, 0x22, 0x3A, 0x00, // commit timestamp
     0x4F,                                           // creatorID 'O'
     0x00,                                           // logtype
     0x00,                                           // reserved
     0x02,                                           // section count
     0x90, 0x91, 0x92, 0x93,                         // OpenBMC log ID
     0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0,    // creator version
     0x50, 0x51, 0x52, 0x53,                         // plid
     0x80, 0x81, 0x82, 0x83};                        // PEL ID

 const std::vector<uint8_t> userHeaderSection{
     // section header
     0x55, 0x48, // ID 'UH'
     0x00, 0x18, // Size
     0x01, 0x0A, // version, subtype
     0x0B, 0x0C, // comp ID

     0x10, 0x04,             // subsystem, scope
     0x20, 0x00,             // severity, type
     0x00, 0x00, 0x00, 0x00, // reserved
     0x03, 0x04,             // problem domain, vector
     0x80, 0xC0,             // action flags
     0x00, 0x00, 0x00, 0x00  // reserved
 };

 const std::vector<uint8_t> srcSectionNoCallouts{

     // Header
     'P', 'S', 0x00, 0x50, 0x01, 0x01, 0x02, 0x02,

     0x02, 0x00, 0x00, // version, flags, reserved
     0x09, 0x00, 0x00, // hex word count, reserved2B
     0x00, 0x48,       // SRC structure size

     // Hex words 2 - 9
     0x02, 0x02, 0x02, 0x55, 0x03, 0x03, 0x03, 0x10, 0x04, 0x04, 0x04, 0x04,
     0x05, 0x05, 0x05, 0x05, 0x06, 0x06, 0x06, 0x06, 0x07, 0x07, 0x07, 0x07,
     0x08, 0x08, 0x08, 0x08, 0x09, 0x09, 0x09, 0x09,
     // ASCII string
     'B', 'D', '8', 'D', '5', '6', '7', '8', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
     ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
     ' ', ' '};

 const std::vector<uint8_t> failingMTMSSection{
     // Header
     0x4D, 0x54, 0x00, 0x1C, 0x01, 0x00, 0x20, 0x00,

     'T',  'T',  'T',  'T',  '-',  'M',  'M',  'M',  '1', '2',
     '3',  '4',  '5',  '6',  '7',  '8',  '9',  'A',  'B', 'C'};

 const std::vector<uint8_t> UserDataSection{
     // Header
     0x55, 0x44, 0x00, 0x10, 0x00, 0x00, 0x20, 0x00,

     0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08};

 const std::vector<uint8_t> ExtUserHeaderSection{
     // Header
     'E', 'H', 0x00, 0x60, 0x01, 0x00, 0x03, 0x04,

     // MTMS
     'T', 'T', 'T', 'T', '-', 'M', 'M', 'M', '1', '2', '3', '4', '5', '6', '7',
     '8', '9', 'A', 'B', 'C',

     // Server FW version
     'S', 'E', 'R', 'V', 'E', 'R', '_', 'V', 'E', 'R', 'S', 'I', 'O', 'N', '\0',
     '\0',

     // Subsystem FW Version
     'B', 'M', 'C', '_', 'V', 'E', 'R', 'S', 'I', 'O', 'N', '\0', '\0', '\0',
     '\0', '\0',

     0x00, 0x00, 0x00, 0x00,                         // Reserved
     0x20, 0x25, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, // Ref time
     0x00, 0x00, 0x00,                               // Reserved

     // SymptomID length and symptom ID
     20, 'B', 'D', '8', 'D', '4', '2', '0', '0', '_', '1', '2', '3', '4', '5',
     '6', '7', '8', '\0', '\0', '\0'};

 const std::vector<uint8_t> srcFRUIdentityCallout{
     'I', 'D', 0x1C, 0x1D,                     // type, size, flags
     '1', '2', '3',  '4',                      // PN
     '5', '6', '7',  0x00, 'A', 'A', 'A', 'A', // CCIN
     '1', '2', '3',  '4',  '5', '6', '7', '8', // SN
     '9', 'A', 'B',  'C'};

 const std::vector<uint8_t> srcPCEIdentityCallout{
     'P', 'E', 0x24, 0x00,                      // type, size, flags
     'T', 'T', 'T',  'T',  '-', 'M', 'M',  'M', // MTM
     '1', '2', '3',  '4',  '5', '6', '7',       // SN
     '8', '9', 'A',  'B',  'C', 'P', 'C',  'E', // Name + null padded
     'N', 'A', 'M',  'E',  '1', '2', 0x00, 0x00, 0x00};

 const std::vector<uint8_t> srcMRUCallout{
     'M',  'R',  0x28, 0x04, // ID, size, flags
     0x00, 0x00, 0x00, 0x00, // Reserved
     0x00, 0x00, 0x00, 'H',  // priority 0
     0x01, 0x01, 0x01, 0x01, // MRU ID 0
     0x00, 0x00, 0x00, 'M',  // priority 1
     0x02, 0x02, 0x02, 0x02, // MRU ID 1
     0x00, 0x00, 0x00, 'L',  // priority 2
     0x03, 0x03, 0x03, 0x03, // MRU ID 2
     0x00, 0x00, 0x00, 'H',  // priority 3
     0x04, 0x04, 0x04, 0x04, // MRU ID 3
 };

 const std::vector<uint8_t> extendedUserDataSection{
     // Header
     0x45, 0x44, 0x00, 0x18, 0x01, 0x02, 0x20, 0x00,

     // Creator ID 'O', and then data
     0x4F, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
     0x05, 0x0A, 0x0B, 0x0C};

 constexpr size_t sectionCountOffset = 27;
 constexpr size_t createTimestampPHOffset = 8;
 constexpr size_t commitTimestampPHOffset = 16;
 constexpr size_t creatorPHOffset = 24;
 constexpr size_t obmcIDPHOffset = 28;
 constexpr size_t plidPHOffset = 40;
 constexpr size_t pelIDPHOffset = 44;
 constexpr size_t sevUHOffset = 10;
 constexpr size_t actionFlagsUHOffset = 18;

 std::vector<uint8_t> pelDataFactory(TestPELType type)
 {
     std::vector<uint8_t> data;

     switch (type)
     {
         case TestPELType::pelSimple:
             data.insert(data.end(), privateHeaderSection.begin(),
                         privateHeaderSection.end());
             data.insert(data.end(), userHeaderSection.begin(),
                         userHeaderSection.end());
             data.insert(data.end(), srcSectionNoCallouts.begin(),
                         srcSectionNoCallouts.end());
             data.insert(data.end(), failingMTMSSection.begin(),
                         failingMTMSSection.end());
             data.insert(data.end(), UserDataSection.begin(),
                         UserDataSection.end());
             data.insert(data.end(), ExtUserHeaderSection.begin(),
                         ExtUserHeaderSection.end());
             data.insert(data.end(), extendedUserDataSection.begin(),
                         extendedUserDataSection.end());
             data.at(sectionCountOffset) = 7;
             break;
         case TestPELType::privateHeaderSection:
             data.insert(data.end(), privateHeaderSection.begin(),
                         privateHeaderSection.end());
             break;
         case TestPELType::userHeaderSection:
             data.insert(data.end(), userHeaderSection.begin(),
                         userHeaderSection.end());
             break;
         case TestPELType::primarySRCSection:
             data.insert(data.end(), srcSectionNoCallouts.begin(),
                         srcSectionNoCallouts.end());
             break;
         case TestPELType::primarySRCSection2Callouts:
         {
             // Start with the no-callouts SRC, and add the callouts section
             // from above.
             auto src = srcSectionNoCallouts;
             auto callouts =
                 srcDataFactory(TestSRCType::calloutSection2Callouts);

             src.insert(src.end(), callouts.begin(), callouts.end());

             // Set the flag that says there are callouts
             // One byte after the 8B header
             src[8 + 1] |= 0x01;

             // Set the new sizes
             uint16_t size = src.size();
             Stream stream{src};

             stream.offset(2); // In the header
             stream << size;

             // In the SRC - the size field doesn't include the header
             size -= 8;
             stream.offset(8 + 6);
             stream << size;

             data.insert(data.end(), src.begin(), src.end());
             break;
         }
         case TestPELType::failingMTMSSection:
             data.insert(data.end(), failingMTMSSection.begin(),
                         failingMTMSSection.end());
         case TestPELType::extendedUserDataSection:
             data.insert(data.end(), extendedUserDataSection.begin(),
                         extendedUserDataSection.end());
     }
     return data;
 }

 std::vector<uint8_t> pelFactory(uint32_t id, char creatorID, uint8_t severity,
                                 uint16_t actionFlags, size_t size)
 {
     std::vector<uint8_t> data;
     size_t offset = 0;

     auto now = std::chrono::system_clock::now();
     auto timestamp = getBCDTime(now);

     // Start with the default Private Header, and modify it
     data.insert(data.end(), privateHeaderSection.begin(),
                 privateHeaderSection.end());
     data.at(creatorPHOffset) = creatorID;

     // Modify the multibyte fields in it
     Stream stream{data};
     stream.offset(createTimestampPHOffset);
     stream << timestamp;
     stream.offset(commitTimestampPHOffset);
     stream << timestamp;
     stream.offset(plidPHOffset);
     stream << id;
     stream.offset(pelIDPHOffset);
     stream << id;
     stream.offset(obmcIDPHOffset);
     stream << id + 500;

     offset = data.size();

     // User Header
     data.insert(data.end(), userHeaderSection.begin(), userHeaderSection.end());
     data.at(offset + sevUHOffset) = severity;
     data.at(offset + actionFlagsUHOffset) = actionFlags >> 8;
     data.at(offset + actionFlagsUHOffset + 1) = actionFlags;

     // Use the default SRC, failing MTMS, and ext user Header sections
     auto src = pelDataFactory(TestPELType::primarySRCSection2Callouts);

     data.insert(data.end(), src.begin(), src.end());
     data.insert(data.end(), failingMTMSSection.begin(),
                 failingMTMSSection.end());
     data.insert(data.end(), ExtUserHeaderSection.begin(),
                 ExtUserHeaderSection.end());

     data.at(sectionCountOffset) = 5;

     // Require the size to be enough for all the above sections.
     assert(size >= data.size());
     assert(size <= 16384);

     // Add a UserData section to get the size we need.
     auto udSection = UserDataSection;
     udSection.resize(size - data.size());

     if (!udSection.empty())
     {
         // At least has to be 8B for the header
         assert(udSection.size() >= 8);

         // UD sections must be 4B aligned
         assert(udSection.size() % 4 == 0);

         // Set the new size in the section heder
         Stream udStream{udSection};
         udStream.offset(2);
         udStream << static_cast<uint16_t>(udSection.size());

         data.insert(data.end(), udSection.begin(), udSection.end());
         data[sectionCountOffset]++;
     }

     assert(size == data.size());
     return data;
 }

 std::vector<uint8_t> srcDataFactory(TestSRCType type)
 {
     switch (type)
     {
         case TestSRCType::fruIdentityStructure:
             return srcFRUIdentityCallout;

         case TestSRCType::pceIdentityStructure:
             return srcPCEIdentityCallout;

         case TestSRCType::mruStructure:
             return srcMRUCallout;

         case TestSRCType::calloutStructureA:
         {
             // Add just the FRU identity substructure to the base structure
             std::vector<uint8_t> data{
                 0xFF, 0x28, 'H', 4,   // size, flags, priority, LC length
                 'U',  '4',  '2', 0x00 // LC
             };

             data.insert(data.end(), srcFRUIdentityCallout.begin(),
                         srcFRUIdentityCallout.end());

             // The final size
             data[0] = data.size();
             return data;
         }
         case TestSRCType::calloutStructureB:
         {
             // Add all 3 substructures to the base structure

             std::vector<uint8_t> data{
                 0xFF, 0x2F, 'L', 8, // size, flags, priority, LC length
                 'U',  '1',  '2', '-', 'P', '1', 0x00, 0x00 // LC
             };
             data.insert(data.end(), srcFRUIdentityCallout.begin(),
                         srcFRUIdentityCallout.end());
             data.insert(data.end(), srcPCEIdentityCallout.begin(),
                         srcPCEIdentityCallout.end());
             data.insert(data.end(), srcMRUCallout.begin(), srcMRUCallout.end());

             // The final size
             data[0] = data.size();
             return data;
         }
         case TestSRCType::calloutSection2Callouts:
         {
             std::vector<uint8_t> data{0xC0, 0x00, 0x00,
                                       0x00}; // ID, flags, length in words

             // Add 2 callouts
             auto callout = srcDataFactory(TestSRCType::calloutStructureA);
             data.insert(data.end(), callout.begin(), callout.end());

             callout = srcDataFactory(TestSRCType::calloutStructureB);
             data.insert(data.end(), callout.begin(), callout.end());

             // Set the actual word length value at offset 2
             Stream stream{data};
             uint16_t wordLength = data.size() / 4;
             stream.offset(2);
             stream << wordLength;
             stream.offset(0);

             return data;
         }
     }
     return {};
 }

 std::unique_ptr<std::vector<uint8_t>> readPELFile(const fs::path& path)
 {
     std::ifstream file{path};

     auto pel = std::make_unique<std::vector<uint8_t>>(
         std::istreambuf_iterator<char>(file), std::istreambuf_iterator<char>());
     return pel;
 }
	/**
	* Copyright © 2019 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "pel_utils.hpp"

	#include "extensions/openpower-pels/private_header.hpp"
	#include "extensions/openpower-pels/user_header.hpp"

	#include <fstream>

	#include <gtest/gtest.h>

	namespace fs = std::filesystem;
	using namespace openpower::pels;

	std::filesystem::path CleanLogID::pelIDFile{};
	std::filesystem::path CleanPELFiles::pelIDFile{};
	std::filesystem::path CleanPELFiles::repoPath{};
	std::filesystem::path CleanPELFiles::registryPath{};

	const std::vector<uint8_t> privateHeaderSection{
	// section header
	0x50, 0x48, // ID 'PH'
	0x00, 0x30, // Size
	0x01, 0x02, // version, subtype
	0x03, 0x04, // comp ID

	0x20, 0x30, 0x05, 0x09, 0x11, 0x1E, 0x1, 0x63, // create timestamp
	0x20, 0x31, 0x06, 0x0F, 0x09, 0x22, 0x3A, 0x00, // commit timestamp
	0x4F, // creatorID 'O'
	0x00, // logtype
	0x00, // reserved
	0x02, // section count
	0x90, 0x91, 0x92, 0x93, // OpenBMC log ID
	0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0, // creator version
	0x50, 0x51, 0x52, 0x53, // plid
	0x80, 0x81, 0x82, 0x83}; // PEL ID

	const std::vector<uint8_t> userHeaderSection{
	// section header
	0x55, 0x48, // ID 'UH'
	0x00, 0x18, // Size
	0x01, 0x0A, // version, subtype
	0x0B, 0x0C, // comp ID

	0x10, 0x04, // subsystem, scope
	0x20, 0x00, // severity, type
	0x00, 0x00, 0x00, 0x00, // reserved
	0x03, 0x04, // problem domain, vector
	0x80, 0xC0, // action flags
	0x00, 0x00, 0x00, 0x00 // reserved
	};

	const std::vector<uint8_t> srcSectionNoCallouts{

	// Header
	'P', 'S', 0x00, 0x50, 0x01, 0x01, 0x02, 0x02,

	0x02, 0x00, 0x00, // version, flags, reserved
	0x09, 0x00, 0x00, // hex word count, reserved2B
	0x00, 0x48, // SRC structure size

	// Hex words 2 - 9
	0x02, 0x02, 0x02, 0x55, 0x03, 0x03, 0x03, 0x10, 0x04, 0x04, 0x04, 0x04,
	0x05, 0x05, 0x05, 0x05, 0x06, 0x06, 0x06, 0x06, 0x07, 0x07, 0x07, 0x07,
	0x08, 0x08, 0x08, 0x08, 0x09, 0x09, 0x09, 0x09,
	// ASCII string
	'B', 'D', '8', 'D', '5', '6', '7', '8', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
	' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
	' ', ' '};

	const std::vector<uint8_t> failingMTMSSection{
	// Header
	0x4D, 0x54, 0x00, 0x1C, 0x01, 0x00, 0x20, 0x00,

	'T', 'T', 'T', 'T', '-', 'M', 'M', 'M', '1', '2',
	'3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C'};

	const std::vector<uint8_t> UserDataSection{
	// Header
	0x55, 0x44, 0x00, 0x10, 0x00, 0x00, 0x20, 0x00,

	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08};

	const std::vector<uint8_t> ExtUserHeaderSection{
	// Header
	'E', 'H', 0x00, 0x60, 0x01, 0x00, 0x03, 0x04,

	// MTMS
	'T', 'T', 'T', 'T', '-', 'M', 'M', 'M', '1', '2', '3', '4', '5', '6', '7',
	'8', '9', 'A', 'B', 'C',

	// Server FW version
	'S', 'E', 'R', 'V', 'E', 'R', '_', 'V', 'E', 'R', 'S', 'I', 'O', 'N', '\0',
	'\0',

	// Subsystem FW Version
	'B', 'M', 'C', '_', 'V', 'E', 'R', 'S', 'I', 'O', 'N', '\0', '\0', '\0',
	'\0', '\0',

	0x00, 0x00, 0x00, 0x00, // Reserved
	0x20, 0x25, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, // Ref time
	0x00, 0x00, 0x00, // Reserved

	// SymptomID length and symptom ID
	20, 'B', 'D', '8', 'D', '4', '2', '0', '0', '_', '1', '2', '3', '4', '5',
	'6', '7', '8', '\0', '\0', '\0'};

	const std::vector<uint8_t> srcFRUIdentityCallout{
	'I', 'D', 0x1C, 0x1D, // type, size, flags
	'1', '2', '3', '4', // PN
	'5', '6', '7', 0x00, 'A', 'A', 'A', 'A', // CCIN
	'1', '2', '3', '4', '5', '6', '7', '8', // SN
	'9', 'A', 'B', 'C'};

	const std::vector<uint8_t> srcPCEIdentityCallout{
	'P', 'E', 0x24, 0x00, // type, size, flags
	'T', 'T', 'T', 'T', '-', 'M', 'M', 'M', // MTM
	'1', '2', '3', '4', '5', '6', '7', // SN
	'8', '9', 'A', 'B', 'C', 'P', 'C', 'E', // Name + null padded
	'N', 'A', 'M', 'E', '1', '2', 0x00, 0x00, 0x00};

	const std::vector<uint8_t> srcMRUCallout{
	'M', 'R', 0x28, 0x04, // ID, size, flags
	0x00, 0x00, 0x00, 0x00, // Reserved
	0x00, 0x00, 0x00, 'H', // priority 0
	0x01, 0x01, 0x01, 0x01, // MRU ID 0
	0x00, 0x00, 0x00, 'M', // priority 1
	0x02, 0x02, 0x02, 0x02, // MRU ID 1
	0x00, 0x00, 0x00, 'L', // priority 2
	0x03, 0x03, 0x03, 0x03, // MRU ID 2
	0x00, 0x00, 0x00, 'H', // priority 3
	0x04, 0x04, 0x04, 0x04, // MRU ID 3
	};

	const std::vector<uint8_t> extendedUserDataSection{
	// Header
	0x45, 0x44, 0x00, 0x18, 0x01, 0x02, 0x20, 0x00,

	// Creator ID 'O', and then data
	0x4F, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
	0x05, 0x0A, 0x0B, 0x0C};

	constexpr size_t sectionCountOffset = 27;
	constexpr size_t createTimestampPHOffset = 8;
	constexpr size_t commitTimestampPHOffset = 16;
	constexpr size_t creatorPHOffset = 24;
	constexpr size_t obmcIDPHOffset = 28;
	constexpr size_t plidPHOffset = 40;
	constexpr size_t pelIDPHOffset = 44;
	constexpr size_t sevUHOffset = 10;
	constexpr size_t actionFlagsUHOffset = 18;

	std::vector<uint8_t> pelDataFactory(TestPELType type)
	{
	std::vector<uint8_t> data;

	switch (type)
	{
	case TestPELType::pelSimple:
	data.insert(data.end(), privateHeaderSection.begin(),
	privateHeaderSection.end());
	data.insert(data.end(), userHeaderSection.begin(),
	userHeaderSection.end());
	data.insert(data.end(), srcSectionNoCallouts.begin(),
	srcSectionNoCallouts.end());
	data.insert(data.end(), failingMTMSSection.begin(),
	failingMTMSSection.end());
	data.insert(data.end(), UserDataSection.begin(),
	UserDataSection.end());
	data.insert(data.end(), ExtUserHeaderSection.begin(),
	ExtUserHeaderSection.end());
	data.insert(data.end(), extendedUserDataSection.begin(),
	extendedUserDataSection.end());
	data.at(sectionCountOffset) = 7;
	break;
	case TestPELType::privateHeaderSection:
	data.insert(data.end(), privateHeaderSection.begin(),
	privateHeaderSection.end());
	break;
	case TestPELType::userHeaderSection:
	data.insert(data.end(), userHeaderSection.begin(),
	userHeaderSection.end());
	break;
	case TestPELType::primarySRCSection:
	data.insert(data.end(), srcSectionNoCallouts.begin(),
	srcSectionNoCallouts.end());
	break;
	case TestPELType::primarySRCSection2Callouts:
	{
	// Start with the no-callouts SRC, and add the callouts section
	// from above.
	auto src = srcSectionNoCallouts;
	auto callouts =
	srcDataFactory(TestSRCType::calloutSection2Callouts);

	src.insert(src.end(), callouts.begin(), callouts.end());

	// Set the flag that says there are callouts
	// One byte after the 8B header
	src[8 + 1] \|= 0x01;

	// Set the new sizes
	uint16_t size = src.size();
	Stream stream{src};

	stream.offset(2); // In the header
	stream << size;

	// In the SRC - the size field doesn't include the header
	size -= 8;
	stream.offset(8 + 6);
	stream << size;

	data.insert(data.end(), src.begin(), src.end());
	break;
	}
	case TestPELType::failingMTMSSection:
	data.insert(data.end(), failingMTMSSection.begin(),
	failingMTMSSection.end());
	case TestPELType::extendedUserDataSection:
	data.insert(data.end(), extendedUserDataSection.begin(),
	extendedUserDataSection.end());
	}
	return data;
	}

	std::vector<uint8_t> pelFactory(uint32_t id, char creatorID, uint8_t severity,
	uint16_t actionFlags, size_t size)
	{
	std::vector<uint8_t> data;
	size_t offset = 0;

	auto now = std::chrono::system_clock::now();
	auto timestamp = getBCDTime(now);

	// Start with the default Private Header, and modify it
	data.insert(data.end(), privateHeaderSection.begin(),
	privateHeaderSection.end());
	data.at(creatorPHOffset) = creatorID;

	// Modify the multibyte fields in it
	Stream stream{data};
	stream.offset(createTimestampPHOffset);
	stream << timestamp;
	stream.offset(commitTimestampPHOffset);
	stream << timestamp;
	stream.offset(plidPHOffset);
	stream << id;
	stream.offset(pelIDPHOffset);
	stream << id;
	stream.offset(obmcIDPHOffset);
	stream << id + 500;

	offset = data.size();

	// User Header
	data.insert(data.end(), userHeaderSection.begin(), userHeaderSection.end());
	data.at(offset + sevUHOffset) = severity;
	data.at(offset + actionFlagsUHOffset) = actionFlags >> 8;
	data.at(offset + actionFlagsUHOffset + 1) = actionFlags;

	// Use the default SRC, failing MTMS, and ext user Header sections
	auto src = pelDataFactory(TestPELType::primarySRCSection2Callouts);

	data.insert(data.end(), src.begin(), src.end());
	data.insert(data.end(), failingMTMSSection.begin(),
	failingMTMSSection.end());
	data.insert(data.end(), ExtUserHeaderSection.begin(),
	ExtUserHeaderSection.end());

	data.at(sectionCountOffset) = 5;

	// Require the size to be enough for all the above sections.
	assert(size >= data.size());
	assert(size <= 16384);

	// Add a UserData section to get the size we need.
	auto udSection = UserDataSection;
	udSection.resize(size - data.size());

	if (!udSection.empty())
	{
	// At least has to be 8B for the header
	assert(udSection.size() >= 8);

	// UD sections must be 4B aligned
	assert(udSection.size() % 4 == 0);

	// Set the new size in the section heder
	Stream udStream{udSection};
	udStream.offset(2);
	udStream << static_cast<uint16_t>(udSection.size());

	data.insert(data.end(), udSection.begin(), udSection.end());
	data[sectionCountOffset]++;
	}

	assert(size == data.size());
	return data;
	}

	std::vector<uint8_t> srcDataFactory(TestSRCType type)
	{
	switch (type)
	{
	case TestSRCType::fruIdentityStructure:
	return srcFRUIdentityCallout;

	case TestSRCType::pceIdentityStructure:
	return srcPCEIdentityCallout;

	case TestSRCType::mruStructure:
	return srcMRUCallout;

	case TestSRCType::calloutStructureA:
	{
	// Add just the FRU identity substructure to the base structure
	std::vector<uint8_t> data{
	0xFF, 0x28, 'H', 4, // size, flags, priority, LC length
	'U', '4', '2', 0x00 // LC
	};

	data.insert(data.end(), srcFRUIdentityCallout.begin(),
	srcFRUIdentityCallout.end());

	// The final size
	data[0] = data.size();
	return data;
	}
	case TestSRCType::calloutStructureB:
	{
	// Add all 3 substructures to the base structure

	std::vector<uint8_t> data{
	0xFF, 0x2F, 'L', 8, // size, flags, priority, LC length
	'U', '1', '2', '-', 'P', '1', 0x00, 0x00 // LC
	};
	data.insert(data.end(), srcFRUIdentityCallout.begin(),
	srcFRUIdentityCallout.end());
	data.insert(data.end(), srcPCEIdentityCallout.begin(),
	srcPCEIdentityCallout.end());
	data.insert(data.end(), srcMRUCallout.begin(), srcMRUCallout.end());

	// The final size
	data[0] = data.size();
	return data;
	}
	case TestSRCType::calloutSection2Callouts:
	{
	std::vector<uint8_t> data{0xC0, 0x00, 0x00,
	0x00}; // ID, flags, length in words

	// Add 2 callouts
	auto callout = srcDataFactory(TestSRCType::calloutStructureA);
	data.insert(data.end(), callout.begin(), callout.end());

	callout = srcDataFactory(TestSRCType::calloutStructureB);
	data.insert(data.end(), callout.begin(), callout.end());

	// Set the actual word length value at offset 2
	Stream stream{data};
	uint16_t wordLength = data.size() / 4;
	stream.offset(2);
	stream << wordLength;
	stream.offset(0);

	return data;
	}
	}
	return {};
	}

	std::unique_ptr<std::vector<uint8_t>> readPELFile(const fs::path& path)
	{
	std::ifstream file{path};

	auto pel = std::make_unique<std::vector<uint8_t>>(
	std::istreambuf_iterator<char>(file), std::istreambuf_iterator<char>());
	return pel;
	}