extensions/openpower-pels/device_callouts.cpp - openbmc/phosphor-logging - Gitiles

 /**
  * Copyright © 2020 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "device_callouts.hpp"

 #include "paths.hpp"

 #include <fstream>
 #include <phosphor-logging/log.hpp>
 #include <regex>

 namespace openpower::pels::device_callouts
 {

 constexpr auto debugFilePath = "/etc/phosphor-logging/";
 constexpr auto calloutFileSuffix = "_dev_callouts.json";

 namespace fs = std::filesystem;
 using namespace phosphor::logging;

 namespace util
 {

 fs::path getJSONFilename(const std::vector<std::string>& compatibleList)
 {
     std::vector<std::string> names{compatibleList};
     auto basePath = getPELReadOnlyDataPath();
     fs::path fullPath;

     // Find an entry in the list of compatible system names that
     // matches a filename we have.

     // Also match on just _dev_callouts.json, which may be present
     // when it's known that compatibleList won't be correct.
     names.push_back("");

     for (const auto& name : names)
     {
         fs::path filename = name + calloutFileSuffix;

         // Check the debug path first
         fs::path path{fs::path{debugFilePath} / filename};

         if (fs::exists(path))
         {
             log<level::INFO>("Found device callout debug file");
             fullPath = path;
             break;
         }

         path = basePath / filename;

         if (fs::exists(path))
         {
             fullPath = path;
             break;
         }
     }

     if (fullPath.empty())
     {
         throw std::invalid_argument(
             "No JSON dev path callout file for this system");
     }

     return fullPath;
 }

 /**
  * @brief Reads the callout JSON into an object based on the
  *        compatible system names list.
  *
  * @param[in] compatibleList - The list of compatible names for this
  *                             system.
  *
  * @return nlohmann::json - The JSON object
  */
 nlohmann::json loadJSON(const std::vector<std::string>& compatibleList)
 {
     auto filename = getJSONFilename(compatibleList);
     std::ifstream file{filename};
     return nlohmann::json::parse(file);
 }

 std::tuple<size_t, uint8_t> getI2CSearchKeys(const std::string& devPath)
 {
     std::smatch match;

     // Look for i2c-A/A-00BB
     // where A = bus number and BB = address
     std::regex regex{"i2c-[0-9]+/([0-9]+)-00([0-9a-f]{2})"};

     regex_search(devPath, match, regex);

     if (match.size() != 3)
     {
         std::string msg = "Could not get I2C bus and address from " + devPath;
         throw std::invalid_argument{msg.c_str()};
     }

     size_t bus = std::stoul(match[1].str(), nullptr, 0);

     // An I2C bus on a CFAM has everything greater than the 10s digit
     // as the CFAM number, so strip it off.  Like:
     //    112 = cfam1 bus 12
     //    1001 = cfam10 bus 1
     bus = bus % 100;

     uint8_t address = std::stoul(match[2].str(), nullptr, 16);

     return {bus, address};
 }

 std::string getFSISearchKeys(const std::string& devPath)
 {
     std::string links;
     std::smatch match;
     auto search = devPath;

     // Look for slave@XX:
     // where XX = link number in hex
     std::regex regex{"slave@([0-9a-f]{2}):"};

     // Find all links in the path and separate them with hyphens.
     while (regex_search(search, match, regex))
     {
         // Convert to an int first to handle a hex number like "0a"
         // though in reality there won't be more than links 0 - 9.
         auto linkNum = std::stoul(match[1].str(), nullptr, 16);
         links += std::to_string(linkNum) + '-';

         search = match.suffix();
     }

     if (links.empty())
     {
         std::string msg = "Could not get FSI links from " + devPath;
         throw std::invalid_argument{msg.c_str()};
     }

     // Remove the trailing '-'
     links.pop_back();

     return links;
 }

 std::tuple<std::string, std::tuple<size_t, uint8_t>>
     getFSII2CSearchKeys(const std::string& devPath)
 {
     // This combines the FSI and i2C search keys

     auto links = getFSISearchKeys(devPath);
     auto busAndAddr = getI2CSearchKeys(devPath);

     return {std::move(links), std::move(busAndAddr)};
 }

 size_t getSPISearchKeys(const std::string& devPath)
 {
     std::smatch match;

     // Look for spi_master/spiX/ where X is the SPI bus/port number
     // Note: This doesn't distinguish between multiple chips on
     // the same port as no need for it yet.
     std::regex regex{"spi_master/spi(\\d+)/"};

     regex_search(devPath, match, regex);

     if (match.size() != 2)
     {
         std::string msg = "Could not get SPI bus from " + devPath;
         throw std::invalid_argument{msg.c_str()};
     }

     size_t port = std::stoul(match[1].str());

     return port;
 }

 std::tuple<std::string, size_t> getFSISPISearchKeys(const std::string& devPath)
 {

     // Combine the FSI and SPI search keys.
     auto links = getFSISearchKeys(devPath);
     auto bus = getSPISearchKeys(devPath);

     return {std::move(links), std::move(bus)};
 }

 /**
  * @brief Pull the callouts out of the JSON callout array passed in
  *
  * Create a vector of Callout objects based on the JSON.
  *
  * This will also fill in the 'debug' member on the first callout
  * in the list, which could contain things like the I2C address and
  * bus extracted from the device path.
  *
  * The callouts are in the order they should be added to the PEL.
  *
  * @param[in] calloutJSON - The Callouts JSON array to extract from
  * @param[in] debug - The debug message to add to the first callout
  *
  * @return std::vector<Callout> - The Callout objects
  */
 std::vector<Callout> extractCallouts(const nlohmann::json& calloutJSON,
                                      const std::string& debug)
 {
     std::vector<Callout> callouts;
     bool addDebug = true;

     // The JSON element passed in is the array of callouts
     if (!calloutJSON.is_array())
     {
         throw std::runtime_error(
             "Dev path callout JSON entry doesn't contain a 'Callouts' array");
     }

     for (auto& callout : calloutJSON)
     {
         Callout c;

         // Add any debug data to the first callout
         if (addDebug && !debug.empty())
         {
             addDebug = false;
             c.debug = debug;
         }

         try
         {
             c.locationCode = callout.at("LocationCode").get<std::string>();
             c.name = callout.at("Name").get<std::string>();
             c.priority = callout.at("Priority").get<std::string>();

             if (callout.contains("MRU"))
             {
                 c.mru = callout.at("MRU").get<std::string>();
             }
         }
         catch (const nlohmann::json::out_of_range& e)
         {
             std::string msg =
                 "Callout entry missing either LocationCode, Name, or Priority "
                 "properties: " +
                 callout.dump();
             throw std::runtime_error(msg.c_str());
         }

         callouts.push_back(c);
     }

     return callouts;
 }

 /**
  * @brief Looks up the callouts in the JSON using the I2C keys.
  *
  * @param[in] i2cBus - The I2C bus
  * @param[in] i2cAddress - The I2C address
  * @param[in] calloutJSON - The JSON containing the callouts
  *
  * @return std::vector<Callout> - The callouts
  */
 std::vector<device_callouts::Callout>
     calloutI2C(size_t i2cBus, uint8_t i2cAddress,
                const nlohmann::json& calloutJSON)
 {
     auto busString = std::to_string(i2cBus);
     auto addrString = std::to_string(i2cAddress);

     try
     {
         const auto& callouts =
             calloutJSON.at("I2C").at(busString).at(addrString).at("Callouts");

         auto dest = calloutJSON.at("I2C")
                         .at(busString)
                         .at(addrString)
                         .at("Dest")
                         .get<std::string>();

         std::string msg = "I2C: bus: " + busString + " address: " + addrString +
                           " dest: " + dest;

         return extractCallouts(callouts, msg);
     }
     catch (const nlohmann::json::out_of_range& e)
     {
         std::string msg = "Problem looking up I2C callouts on " + busString +
                           " " + addrString + ": " + std::string{e.what()};
         throw std::invalid_argument(msg.c_str());
     }
 }

 /**
  * @brief Looks up the callouts in the JSON for this I2C path.
  *
  * @param[in] devPath - The device path
  * @param[in] calloutJSON - The JSON containing the callouts
  *
  * @return std::vector<Callout> - The callouts
  */
 std::vector<device_callouts::Callout>
     calloutI2CUsingPath(const std::string& devPath,
                         const nlohmann::json& calloutJSON)
 {
     auto [bus, address] = getI2CSearchKeys(devPath);

     return calloutI2C(bus, address, calloutJSON);
 }

 /**
  * @brief Looks up the callouts in the JSON for this FSI path.
  *
  * @param[in] devPath - The device path
  * @param[in] calloutJSON - The JSON containing the callouts
  *
  * @return std::vector<Callout> - The callouts
  */
 std::vector<device_callouts::Callout>
     calloutFSI(const std::string& devPath, const nlohmann::json& calloutJSON)
 {
     auto links = getFSISearchKeys(devPath);

     try
     {
         const auto& callouts = calloutJSON.at("FSI").at(links).at("Callouts");

         auto dest =
             calloutJSON.at("FSI").at(links).at("Dest").get<std::string>();

         std::string msg = "FSI: links: " + links + " dest: " + dest;

         return extractCallouts(callouts, msg);
     }
     catch (const nlohmann::json::out_of_range& e)
     {
         std::string msg = "Problem looking up FSI callouts on " + links + ": " +
                           std::string{e.what()};
         throw std::invalid_argument(msg.c_str());
     }
 }

 /**
  * @brief Looks up the callouts in the JSON for this FSI-I2C path.
  *
  * @param[in] devPath - The device path
  * @param[in] calloutJSON - The JSON containing the callouts
  *
  * @return std::vector<Callout> - The callouts
  */
 std::vector<device_callouts::Callout>
     calloutFSII2C(const std::string& devPath, const nlohmann::json& calloutJSON)
 {
     auto linksAndI2C = getFSII2CSearchKeys(devPath);
     auto links = std::get<std::string>(linksAndI2C);
     const auto& busAndAddr = std::get<1>(linksAndI2C);

     auto busString = std::to_string(std::get<size_t>(busAndAddr));
     auto addrString = std::to_string(std::get<uint8_t>(busAndAddr));

     try
     {
         auto& callouts = calloutJSON.at("FSI-I2C")
                              .at(links)
                              .at(busString)
                              .at(addrString)
                              .at("Callouts");

         auto dest = calloutJSON.at("FSI-I2C")
                         .at(links)
                         .at(busString)
                         .at(addrString)
                         .at("Dest")
                         .get<std::string>();

         std::string msg = "FSI-I2C: links: " + links + " bus: " + busString +
                           " addr: " + addrString + " dest: " + dest;

         return extractCallouts(callouts, msg);
     }
     catch (const nlohmann::json::out_of_range& e)
     {
         std::string msg = "Problem looking up FSI-I2C callouts on " + links +
                           " " + busString + " " + addrString + ": " + e.what();
         throw std::invalid_argument(msg.c_str());
     }
 }

 /**
  * @brief Looks up the callouts in the JSON for this FSI-SPI path.
  *
  * @param[in] devPath - The device path
  * @param[in] calloutJSON - The JSON containing the callouts
  *
  * @return std::vector<Callout> - The callouts
  */
 std::vector<device_callouts::Callout>
     calloutFSISPI(const std::string& devPath, const nlohmann::json& calloutJSON)
 {
     auto linksAndSPI = getFSISPISearchKeys(devPath);
     auto links = std::get<std::string>(linksAndSPI);
     auto busString = std::to_string(std::get<size_t>(linksAndSPI));

     try
     {
         auto& callouts =
             calloutJSON.at("FSI-SPI").at(links).at(busString).at("Callouts");

         auto dest = calloutJSON.at("FSI-SPI")
                         .at(links)
                         .at(busString)
                         .at("Dest")
                         .get<std::string>();

         std::string msg = "FSI-SPI: links: " + links + " bus: " + busString +
                           " dest: " + dest;

         return extractCallouts(callouts, msg);
     }
     catch (const nlohmann::json::out_of_range& e)
     {
         std::string msg = "Problem looking up FSI-SPI callouts on " + links +
                           " " + busString + ": " + std::string{e.what()};
         throw std::invalid_argument(msg.c_str());
     }
 }

 /**
  * @brief Returns the callouts from the JSON based on the input
  *        device path.
  *
  * @param[in] devPath - The device path
  * @param[in] json - The callout JSON
  *
  * @return std::vector<Callout> - The list of callouts
  */
 std::vector<device_callouts::Callout> findCallouts(const std::string& devPath,
                                                    const nlohmann::json& json)
 {
     std::vector<Callout> callouts;
     fs::path path;

     // Gives the /sys/devices/platform/ path
     try
     {
         path = fs::canonical(devPath);
     }
     catch (const fs::filesystem_error& e)
     {
         // Path not there, still try to do the callout
         path = devPath;
     }

     switch (util::getCalloutType(path))
     {
         case util::CalloutType::i2c:
             callouts = calloutI2CUsingPath(path, json);
             break;
         case util::CalloutType::fsi:
             callouts = calloutFSI(path, json);
             break;
         case util::CalloutType::fsii2c:
             callouts = calloutFSII2C(path, json);
             break;
         case util::CalloutType::fsispi:
             callouts = calloutFSISPI(path, json);
             break;
         default:
             std::string msg =
                 "Could not get callout type from device path: " + path.string();
             throw std::invalid_argument{msg.c_str()};
             break;
     }

     return callouts;
 }

 CalloutType getCalloutType(const std::string& devPath)
 {
     if ((devPath.find("fsi-master") != std::string::npos) &&
         (devPath.find("i2c-") != std::string::npos))
     {
         return CalloutType::fsii2c;
     }

     if ((devPath.find("fsi-master") != std::string::npos) &&
         (devPath.find("spi") != std::string::npos))
     {
         return CalloutType::fsispi;
     }

     // Treat anything else FSI related as plain FSI
     if (devPath.find("fsi-master") != std::string::npos)
     {
         return CalloutType::fsi;
     }

     if (devPath.find("i2c-bus/i2c-") != std::string::npos)
     {
         return CalloutType::i2c;
     }

     return CalloutType::unknown;
 }

 } // namespace util

 std::vector<Callout> getCallouts(const std::string& devPath,
                                  const std::vector<std::string>& compatibleList)
 {
     auto json = util::loadJSON(compatibleList);
     return util::findCallouts(devPath, json);
 }

 std::vector<Callout>
     getI2CCallouts(size_t i2cBus, uint8_t i2cAddress,
                    const std::vector<std::string>& compatibleList)
 {
     auto json = util::loadJSON(compatibleList);
     return util::calloutI2C(i2cBus, i2cAddress, json);
 }

 } // namespace openpower::pels::device_callouts
	/**
	* Copyright © 2020 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "device_callouts.hpp"

	#include "paths.hpp"

	#include <fstream>
	#include <phosphor-logging/log.hpp>
	#include <regex>

	namespace openpower::pels::device_callouts
	{

	constexpr auto debugFilePath = "/etc/phosphor-logging/";
	constexpr auto calloutFileSuffix = "_dev_callouts.json";

	namespace fs = std::filesystem;
	using namespace phosphor::logging;

	namespace util
	{

	fs::path getJSONFilename(const std::vector<std::string>& compatibleList)
	{
	std::vector<std::string> names{compatibleList};
	auto basePath = getPELReadOnlyDataPath();
	fs::path fullPath;

	// Find an entry in the list of compatible system names that
	// matches a filename we have.

	// Also match on just _dev_callouts.json, which may be present
	// when it's known that compatibleList won't be correct.
	names.push_back("");

	for (const auto& name : names)
	{
	fs::path filename = name + calloutFileSuffix;

	// Check the debug path first
	fs::path path{fs::path{debugFilePath} / filename};

	if (fs::exists(path))
	{
	log<level::INFO>("Found device callout debug file");
	fullPath = path;
	break;
	}

	path = basePath / filename;

	if (fs::exists(path))
	{
	fullPath = path;
	break;
	}
	}

	if (fullPath.empty())
	{
	throw std::invalid_argument(
	"No JSON dev path callout file for this system");
	}

	return fullPath;
	}

	/**
	* @brief Reads the callout JSON into an object based on the
	* compatible system names list.
	*
	* @param[in] compatibleList - The list of compatible names for this
	* system.
	*
	* @return nlohmann::json - The JSON object
	*/
	nlohmann::json loadJSON(const std::vector<std::string>& compatibleList)
	{
	auto filename = getJSONFilename(compatibleList);
	std::ifstream file{filename};
	return nlohmann::json::parse(file);
	}

	std::tuple<size_t, uint8_t> getI2CSearchKeys(const std::string& devPath)
	{
	std::smatch match;

	// Look for i2c-A/A-00BB
	// where A = bus number and BB = address
	std::regex regex{"i2c-[0-9]+/([0-9]+)-00([0-9a-f]{2})"};

	regex_search(devPath, match, regex);

	if (match.size() != 3)
	{
	std::string msg = "Could not get I2C bus and address from " + devPath;
	throw std::invalid_argument{msg.c_str()};
	}

	size_t bus = std::stoul(match[1].str(), nullptr, 0);

	// An I2C bus on a CFAM has everything greater than the 10s digit
	// as the CFAM number, so strip it off. Like:
	// 112 = cfam1 bus 12
	// 1001 = cfam10 bus 1
	bus = bus % 100;

	uint8_t address = std::stoul(match[2].str(), nullptr, 16);

	return {bus, address};
	}

	std::string getFSISearchKeys(const std::string& devPath)
	{
	std::string links;
	std::smatch match;
	auto search = devPath;

	// Look for slave@XX:
	// where XX = link number in hex
	std::regex regex{"slave@([0-9a-f]{2}):"};

	// Find all links in the path and separate them with hyphens.
	while (regex_search(search, match, regex))
	{
	// Convert to an int first to handle a hex number like "0a"
	// though in reality there won't be more than links 0 - 9.
	auto linkNum = std::stoul(match[1].str(), nullptr, 16);
	links += std::to_string(linkNum) + '-';

	search = match.suffix();
	}

	if (links.empty())
	{
	std::string msg = "Could not get FSI links from " + devPath;
	throw std::invalid_argument{msg.c_str()};
	}

	// Remove the trailing '-'
	links.pop_back();

	return links;
	}

	std::tuple<std::string, std::tuple<size_t, uint8_t>>
	getFSII2CSearchKeys(const std::string& devPath)
	{
	// This combines the FSI and i2C search keys

	auto links = getFSISearchKeys(devPath);
	auto busAndAddr = getI2CSearchKeys(devPath);

	return {std::move(links), std::move(busAndAddr)};
	}

	size_t getSPISearchKeys(const std::string& devPath)
	{
	std::smatch match;

	// Look for spi_master/spiX/ where X is the SPI bus/port number
	// Note: This doesn't distinguish between multiple chips on
	// the same port as no need for it yet.
	std::regex regex{"spi_master/spi(\\d+)/"};

	regex_search(devPath, match, regex);

	if (match.size() != 2)
	{
	std::string msg = "Could not get SPI bus from " + devPath;
	throw std::invalid_argument{msg.c_str()};
	}

	size_t port = std::stoul(match[1].str());

	return port;
	}

	std::tuple<std::string, size_t> getFSISPISearchKeys(const std::string& devPath)
	{

	// Combine the FSI and SPI search keys.
	auto links = getFSISearchKeys(devPath);
	auto bus = getSPISearchKeys(devPath);

	return {std::move(links), std::move(bus)};
	}

	/**
	* @brief Pull the callouts out of the JSON callout array passed in
	*
	* Create a vector of Callout objects based on the JSON.
	*
	* This will also fill in the 'debug' member on the first callout
	* in the list, which could contain things like the I2C address and
	* bus extracted from the device path.
	*
	* The callouts are in the order they should be added to the PEL.
	*
	* @param[in] calloutJSON - The Callouts JSON array to extract from
	* @param[in] debug - The debug message to add to the first callout
	*
	* @return std::vector<Callout> - The Callout objects
	*/
	std::vector<Callout> extractCallouts(const nlohmann::json& calloutJSON,
	const std::string& debug)
	{
	std::vector<Callout> callouts;
	bool addDebug = true;

	// The JSON element passed in is the array of callouts
	if (!calloutJSON.is_array())
	{
	throw std::runtime_error(
	"Dev path callout JSON entry doesn't contain a 'Callouts' array");
	}

	for (auto& callout : calloutJSON)
	{
	Callout c;

	// Add any debug data to the first callout
	if (addDebug && !debug.empty())
	{
	addDebug = false;
	c.debug = debug;
	}

	try
	{
	c.locationCode = callout.at("LocationCode").get<std::string>();
	c.name = callout.at("Name").get<std::string>();
	c.priority = callout.at("Priority").get<std::string>();

	if (callout.contains("MRU"))
	{
	c.mru = callout.at("MRU").get<std::string>();
	}
	}
	catch (const nlohmann::json::out_of_range& e)
	{
	std::string msg =
	"Callout entry missing either LocationCode, Name, or Priority "
	"properties: " +
	callout.dump();
	throw std::runtime_error(msg.c_str());
	}

	callouts.push_back(c);
	}

	return callouts;
	}

	/**
	* @brief Looks up the callouts in the JSON using the I2C keys.
	*
	* @param[in] i2cBus - The I2C bus
	* @param[in] i2cAddress - The I2C address
	* @param[in] calloutJSON - The JSON containing the callouts
	*
	* @return std::vector<Callout> - The callouts
	*/
	std::vector<device_callouts::Callout>
	calloutI2C(size_t i2cBus, uint8_t i2cAddress,
	const nlohmann::json& calloutJSON)
	{
	auto busString = std::to_string(i2cBus);
	auto addrString = std::to_string(i2cAddress);

	try
	{
	const auto& callouts =
	calloutJSON.at("I2C").at(busString).at(addrString).at("Callouts");

	auto dest = calloutJSON.at("I2C")
	.at(busString)
	.at(addrString)
	.at("Dest")
	.get<std::string>();

	std::string msg = "I2C: bus: " + busString + " address: " + addrString +
	" dest: " + dest;

	return extractCallouts(callouts, msg);
	}
	catch (const nlohmann::json::out_of_range& e)
	{
	std::string msg = "Problem looking up I2C callouts on " + busString +
	" " + addrString + ": " + std::string{e.what()};
	throw std::invalid_argument(msg.c_str());
	}
	}

	/**
	* @brief Looks up the callouts in the JSON for this I2C path.
	*
	* @param[in] devPath - The device path
	* @param[in] calloutJSON - The JSON containing the callouts
	*
	* @return std::vector<Callout> - The callouts
	*/
	std::vector<device_callouts::Callout>
	calloutI2CUsingPath(const std::string& devPath,
	const nlohmann::json& calloutJSON)
	{
	auto [bus, address] = getI2CSearchKeys(devPath);

	return calloutI2C(bus, address, calloutJSON);
	}

	/**
	* @brief Looks up the callouts in the JSON for this FSI path.
	*
	* @param[in] devPath - The device path
	* @param[in] calloutJSON - The JSON containing the callouts
	*
	* @return std::vector<Callout> - The callouts
	*/
	std::vector<device_callouts::Callout>
	calloutFSI(const std::string& devPath, const nlohmann::json& calloutJSON)
	{
	auto links = getFSISearchKeys(devPath);

	try
	{
	const auto& callouts = calloutJSON.at("FSI").at(links).at("Callouts");

	auto dest =
	calloutJSON.at("FSI").at(links).at("Dest").get<std::string>();

	std::string msg = "FSI: links: " + links + " dest: " + dest;

	return extractCallouts(callouts, msg);
	}
	catch (const nlohmann::json::out_of_range& e)
	{
	std::string msg = "Problem looking up FSI callouts on " + links + ": " +
	std::string{e.what()};
	throw std::invalid_argument(msg.c_str());
	}
	}

	/**
	* @brief Looks up the callouts in the JSON for this FSI-I2C path.
	*
	* @param[in] devPath - The device path
	* @param[in] calloutJSON - The JSON containing the callouts
	*
	* @return std::vector<Callout> - The callouts
	*/
	std::vector<device_callouts::Callout>
	calloutFSII2C(const std::string& devPath, const nlohmann::json& calloutJSON)
	{
	auto linksAndI2C = getFSII2CSearchKeys(devPath);
	auto links = std::get<std::string>(linksAndI2C);
	const auto& busAndAddr = std::get<1>(linksAndI2C);

	auto busString = std::to_string(std::get<size_t>(busAndAddr));
	auto addrString = std::to_string(std::get<uint8_t>(busAndAddr));

	try
	{
	auto& callouts = calloutJSON.at("FSI-I2C")
	.at(links)
	.at(busString)
	.at(addrString)
	.at("Callouts");

	auto dest = calloutJSON.at("FSI-I2C")
	.at(links)
	.at(busString)
	.at(addrString)
	.at("Dest")
	.get<std::string>();

	std::string msg = "FSI-I2C: links: " + links + " bus: " + busString +
	" addr: " + addrString + " dest: " + dest;

	return extractCallouts(callouts, msg);
	}
	catch (const nlohmann::json::out_of_range& e)
	{
	std::string msg = "Problem looking up FSI-I2C callouts on " + links +
	" " + busString + " " + addrString + ": " + e.what();
	throw std::invalid_argument(msg.c_str());
	}
	}

	/**
	* @brief Looks up the callouts in the JSON for this FSI-SPI path.
	*
	* @param[in] devPath - The device path
	* @param[in] calloutJSON - The JSON containing the callouts
	*
	* @return std::vector<Callout> - The callouts
	*/
	std::vector<device_callouts::Callout>
	calloutFSISPI(const std::string& devPath, const nlohmann::json& calloutJSON)
	{
	auto linksAndSPI = getFSISPISearchKeys(devPath);
	auto links = std::get<std::string>(linksAndSPI);
	auto busString = std::to_string(std::get<size_t>(linksAndSPI));

	try
	{
	auto& callouts =
	calloutJSON.at("FSI-SPI").at(links).at(busString).at("Callouts");

	auto dest = calloutJSON.at("FSI-SPI")
	.at(links)
	.at(busString)
	.at("Dest")
	.get<std::string>();

	std::string msg = "FSI-SPI: links: " + links + " bus: " + busString +
	" dest: " + dest;

	return extractCallouts(callouts, msg);
	}
	catch (const nlohmann::json::out_of_range& e)
	{
	std::string msg = "Problem looking up FSI-SPI callouts on " + links +
	" " + busString + ": " + std::string{e.what()};
	throw std::invalid_argument(msg.c_str());
	}
	}

	/**
	* @brief Returns the callouts from the JSON based on the input
	* device path.
	*
	* @param[in] devPath - The device path
	* @param[in] json - The callout JSON
	*
	* @return std::vector<Callout> - The list of callouts
	*/
	std::vector<device_callouts::Callout> findCallouts(const std::string& devPath,
	const nlohmann::json& json)
	{
	std::vector<Callout> callouts;
	fs::path path;

	// Gives the /sys/devices/platform/ path
	try
	{
	path = fs::canonical(devPath);
	}
	catch (const fs::filesystem_error& e)
	{
	// Path not there, still try to do the callout
	path = devPath;
	}

	switch (util::getCalloutType(path))
	{
	case util::CalloutType::i2c:
	callouts = calloutI2CUsingPath(path, json);
	break;
	case util::CalloutType::fsi:
	callouts = calloutFSI(path, json);
	break;
	case util::CalloutType::fsii2c:
	callouts = calloutFSII2C(path, json);
	break;
	case util::CalloutType::fsispi:
	callouts = calloutFSISPI(path, json);
	break;
	default:
	std::string msg =
	"Could not get callout type from device path: " + path.string();
	throw std::invalid_argument{msg.c_str()};
	break;
	}

	return callouts;
	}

	CalloutType getCalloutType(const std::string& devPath)
	{
	if ((devPath.find("fsi-master") != std::string::npos) &&
	(devPath.find("i2c-") != std::string::npos))
	{
	return CalloutType::fsii2c;
	}

	if ((devPath.find("fsi-master") != std::string::npos) &&
	(devPath.find("spi") != std::string::npos))
	{
	return CalloutType::fsispi;
	}

	// Treat anything else FSI related as plain FSI
	if (devPath.find("fsi-master") != std::string::npos)
	{
	return CalloutType::fsi;
	}

	if (devPath.find("i2c-bus/i2c-") != std::string::npos)
	{
	return CalloutType::i2c;
	}

	return CalloutType::unknown;
	}

	} // namespace util

	std::vector<Callout> getCallouts(const std::string& devPath,
	const std::vector<std::string>& compatibleList)
	{
	auto json = util::loadJSON(compatibleList);
	return util::findCallouts(devPath, json);
	}

	std::vector<Callout>
	getI2CCallouts(size_t i2cBus, uint8_t i2cAddress,
	const std::vector<std::string>& compatibleList)
	{
	auto json = util::loadJSON(compatibleList);
	return util::calloutI2C(i2cBus, i2cAddress, json);
	}

	} // namespace openpower::pels::device_callouts