Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-logging / b2b7ef4fb6c57403548fe0f14a427197f886970b / . / extensions / openpower-pels / registry / message_registry.json
blob: 19cf9e90f213fcc6792e4fbefc81109453b0ac2a [file] [log] [blame]
{
"PELs":
[
{
"Name": "xyz.openbmc_project.Common.Error.Timeout",
"Subsystem": "bmc_firmware",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1001",
"Words6To9":
{
"6":
{
"Description": "Timeout in ms",
"AdditionalDataPropSource": "TIMEOUT_IN_MSEC"
}
}
},
"Documentation":
{
"Description": "This is a generic timeout error",
"Message": "An operation timed out",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Error.InternalFailure",
"Subsystem": "bmc_firmware",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1002",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "BMC code had a generic internal failure",
"Message": "An application had an internal failure",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Error.InvalidArgument",
"Subsystem": "user_error",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1003",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "BMC code was given an invalid argument",
"Message": "Code was given an invalid argument",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Error.InsufficientPermission",
"Subsystem": "user_error",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1004",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "An operation failed due to insufficient permission",
"Message": "An operation failed due to unsufficient permission",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Error.NotAllowed",
"Subsystem": "user_error",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1005",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "An operation failed because it isn't allowed",
"Message": "An operation failed because it isn't allowed",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Error.NoCACertificate",
"Subsystem": "user_error",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x1006",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "The server's CA certificate has not been provided",
"Message": "The server's CA certificate has not been provided"
}
},
{
"Name": "xyz.openbmc_project.Sensor.Device.Error.ReadFailure",
"Subsystem": "cec_i2c",
"SRC":
{
"ReasonCode": "0x1007",
"Words6To9":
{
"6":
{
"Description": "errno of the failure",
"AdditionalDataPropSource": "CALLOUT_ERRNO"
}
}
},
"Documentation":
{
"Description": "Sensor device read failure",
"Message": "There was a failure when reading a sensor device",
"Notes": [
"The severity is set by the creator.",
"The action flags are set automatically by the code.",
"Callouts added based on CALLOUT_DEVICE_PATH."
]
}
},
{
"Name": "xyz.openbmc_project.Common.Device.Error.ReadFailure",
"Subsystem": "cec_i2c",
"SRC":
{
"ReasonCode": "0x1008",
"Words6To9":
{
"6":
{
"Description": "errno of the failure",
"AdditionalDataPropSource": "CALLOUT_ERRNO"
}
}
},
"Documentation":
{
"Description": "Device read failure",
"Message": "There was a failure when reading a hardware device",
"Notes": [
"The severity is set by the creator.",
"The action flags are set automatically by the code.",
"Callouts added based on CALLOUT_DEVICE_PATH."
]
}
},
{
"Name": "xyz.openbmc_project.Control.Device.Error.WriteFailure",
"Subsystem": "cec_i2c",
"SRC":
{
"ReasonCode": "0x1009",
"Words6To9":
{
"6":
{
"Description": "errno of the failure",
"AdditionalDataPropSource": "CALLOUT_ERRNO"
}
}
},
"Documentation":
{
"Description": "Device write failure",
"Message": "There was a failure when writing to a hardware device",
"Notes": [
"The severity is set by the creator.",
"The action flags are set automatically by the code.",
"Callouts added based on CALLOUT_DEVICE_PATH"
]
}
},
{
"Name": "xyz.openbmc_project.Common.Device.Error.WriteFailure",
"Subsystem": "cec_i2c",
"SRC":
{
"ReasonCode": "0x100A",
"Words6To9":
{
"6":
{
"Description": "errno of the failure",
"AdditionalDataPropSource": "CALLOUT_ERRNO"
}
}
},
"Documentation":
{
"Description": "Device write failure",
"Message": "There was a failure when writing to a hardware device",
"Notes": [
"The severity is set by the creator.",
"The action flags are set automatically by the code.",
"Callouts added based on CALLOUT_DEVICE_PATH"
]
}
},
{
"Name": "org.open_power.Logging.Error.SentBadPELToHost",
"Subsystem": "bmc_firmware",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0x2001",
"Words6To9":
{
"6":
{
"Description": "The bad PEL ID",
"AdditionalDataPropSource": "BAD_ID"
}
}
},
"Documentation":
{
"Description": "The BMC sent the host a malformed PEL",
"Message": "The BMC sent the host a malformed PEL",
"Notes": [
"The host firmware rejected that PEL."
]
}
},
{
"Name": "org.open_power.Logging.Error.BadHostPEL",
"Subsystem": "platform_firmware",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x2002",
"Words6To9":
{
"6":
{
"Description": "The PLID of the invalid PEL",
"AdditionalDataPropSource": "PLID"
},
"7":
{
"Description": "The corresponding OpenBMC event log ID",
"AdditionalDataPropSource": "OBMC_LOG_ID"
},
"8":
{
"Description": "The size of the invalid PEL",
"AdditionalDataPropSource": "PEL_SIZE"
}
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "The host sent the BMC an invalid PEL",
"Message": "The host sent the BMC an invalid PEL",
"Notes": [
]
}
},
{
"Name": "org.open_power.Logging.Error.TestError1",
"Subsystem": "platform_firmware",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x2003",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{"Priority": "high", "Procedure": "bmc_code"},
{"Priority": "medium", "SymbolicFRU": "service_docs"}
]
}
],
"Documentation":
{
"Description": "An error for testing",
"Message": "This is a test error"
}
},
{
"Name": "xyz.openbmc_project.Logging.Error.Default",
"Subsystem": "other_na",
"SRC":
{
"ReasonCode": "0x2004",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "This entry is used when no other matching entry is found",
"Message": "Unknown (Original event not in message registry)",
"Notes": [
"This is used when the actual error name isn't found in ",
"the registry. The original error name will be stored ",
"in the UserData section that contains the AdditionalData ",
"properties using the key ERROR_NAME.",
"This error may contain callouts if the creator passed ",
"them in.",
"The severity is set by the creator.",
"If this error is seen, then a code change needs to be ",
"made to add the missing error entry to this registry."
]
}
},
{
"Name": "org.open_power.Logging.Error.TestError2",
"Subsystem": "bmc_firmware",
"Severity": "recovered",
"ActionFlags": ["report"],
"SRC":
{
"ReasonCode": "0x2005",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
],
"Documentation":
{
"Description": "An error for testing",
"Message": "This is a test recoverable error",
"Notes": [
"This error is not created by BMC code and is ",
"only used for error injection tests."
]
}
},
{
"Name": "org.open_power.PHAL.Error.Boot",
"Subsystem": "cec_hardware",
"ComponentID": "0x3000",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x3001",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure occured during boot process",
"Message": "Failure occured during boot process",
"Notes": [
"Debug traces will be captured in AdditionalData section"
]
}
},
{
"Name": "org.open_power.PHAL.Error.PrePowerOff",
"Subsystem": "cec_hardware",
"ComponentID": "0x3000",
"SRC":
{
"ReasonCode": "0x3002",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure occurred during PHAL pre-poweroff operations",
"Message": "Failure occurred during PHAL pre-poweroff operations",
"Notes": [
"Severity needs to be set based on needs for this registry.",
"FFDC (First Failure Data Collection) will be collected ",
"and added into PEL."
]
}
},
{
"Name": "org.open_power.PHAL.Error.devtreeSync",
"Subsystem": "cec_hardware",
"ComponentID": "0x3000",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x3003",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure occurred during PHAL devtree sync ",
"Message": "Failure occurred during PHAL devtree sync",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "org.open_power.PHAL.Error.devtreeBackup",
"Subsystem": "cec_hardware",
"ComponentID": "0x3000",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x3004",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure occurred during PHAL devtree backup ",
"Message": "Failure occurred during PHAL devtree backup",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "org.open_power.PHAL.Error.HostRunning",
"Subsystem": "cec_sp_hostboot_iface",
"ComponentID": "0x3000",
"SRC":
{
"ReasonCode": "0x3005",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Host did not respond to BMC after a BMC reset",
"Message": "Host did not respond to BMC after a BMC reset but hardware indicates it is running",
"Notes": [
"System will be left in its current state to ensure host ",
"is not unexpectedly taken down. There is most likely an ",
"issue in the software or hardware communication path ",
"between the BMC and the Host firmware.",
"A BMC dump will be collected with relevant FFDC."
]
}
},
{
"Name": "org.open_power.PHAL.Error.devtreeReinit",
"Subsystem": "cec_hardware",
"ComponentID": "0x3000",
"Severity": "unrecoverable",
"SRC":
{
"ReasonCode": "0x3006",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure re-initializing BMC to Host data structure",
"Message": "Failure occurred during re-initializing BMC to Host data structure",
"Notes": [
"The journal should contain more information"
]
}
},
{
"Name": "org.open_power.HardwareIsolation.Error",
"Subsystem": "cec_hardware",
"ComponentID": "0x3100",
"SRC":
{
"ReasonCode": "0x3101",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Failure occured during hardware isolation operations",
"Message": "Failure occured during hardware isolation operations",
"Notes": [
"Severity needs to be set based on needs for this registry.",
"Debug traces will be captured in AdditionalData section"
]
}
},
{
"Name": "xyz.openbmc_project.State.Error.HostNotRunning",
"Subsystem": "cec_sp_hostboot_iface",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3401",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Host was booting or booted before BMC reset but is now unresponsive",
"Message": "Host did not respond to BMC after a BMC reset but it was booting or booted prior to the BMC reboot",
"Notes": [
"System will follow recovery policy, resulting in this ",
"error and most likely a a reboot of the host. The issue ",
"is most likely the result of the BMC rebooting while the ",
"host was booting and in a state where it still needed ",
"the BMC to complete its boot."
]
}
},
{
"Name": "xyz.openbmc_project.State.ChassisPowerBad",
"Subsystem": "input_power_source",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3402",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "Chassis input power is in a bad state",
"Message": "Chassis input power is in a bad state, look for other logs with more details",
"Notes": [
"The system is most likely in a limited power situation. ",
"There is enough power for the BMC to operate but not the ",
"CEC hardware. Check for UPS or brownout logs."
]
}
},
{
"Name": "xyz.openbmc_project.State.PinholeReset",
"Subsystem": "cec_op_panel",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3403",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "User initiated a pinhole reset via the op-panel",
"Message": "User initiated a pinhole reset via the op-panel",
"Notes": [
"This is a notification log to record the fact that a ",
"pinhole reset was performed on the BMC, resulting in a ",
"hard reset of the BMC."
]
}
},
{
"Name": "xyz.openbmc_project.State.Error.CriticalServiceFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3404",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "A critical BMC application has failed on the system",
"Message": "A critical BMC application has failed on the system, the BMC is in an undefined state",
"Notes": [
"As a part of generating this error log, a BMC dump has ",
"also been generated. Please collect this dump if possible. ",
"The BMC state is undefined but basic services could still ",
"be available. Usually an AC cycle of the entire system is ",
"the best recovery option from this error."
]
}
},
{
"Name": "xyz.openbmc_project.State.Error.SecurityCheckFail",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3405",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "A firmware security check has failed",
"Message": "A firmware security check has failed, most likely something is not configured correctly",
"Notes": [
"This log is only generated in the manufacturing ",
"environment and it indicates that something has not ",
"been configured correctly. Use the data in the PEL to ",
"determine what that is."
]
}
},
{
"Name": "xyz.openbmc_project.State.BMC.Error.MultiUserTargetFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3406",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to reach BMC Ready state",
"Message": "The system has failed to reach BMC Ready state, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"for the BMC to reach Ready state has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Chassis.Error.PowerOnFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3407",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to reach chassis power on state",
"Message": "The system has failed to reach chassis power on state, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"for the BMC to power on the chassis has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Chassis.Error.PowerOffFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3408",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to reach chassis power off state",
"Message": "The system has failed to reach chassis power off state, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"for the BMC to power off the chassis has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Host.Error.HostStartFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3409",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to start the host firmware",
"Message": "The system has failed to start the host firmware, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"for the BMC to start the host has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Host.Error.HostStartMinFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3410",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to start the host firmware",
"Message": "The system has failed to start the host firmware, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"for the BMC to start the host has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Host.Error.HostShutdownFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3411",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to shutdown the host firmware",
"Message": "The system has failed to shutdown the host firmware, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"to shutdown the host firmware has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Host.Error.HostStopFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3412",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to stop the host firmware",
"Message": "The system has failed to stop the host firmware, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"to stop the host firmware has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Host.Error.HostRebootFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3413",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The system has failed to reboot the host firmware",
"Message": "The system has failed to reboot the host firmware, look for other errors",
"Notes": [
"This log indicates a critical BMC application required ",
"to reboot the host firmware has failed to start ",
"successfully. Look in the log for other errors indicating ",
"what has failed."
]
}
},
{
"Name": "xyz.openbmc_project.State.Error.HostQuiesce",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3400",
"SRC":
{
"ReasonCode": "0x3414",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [{"Priority": "high", "Procedure": "next_level_support"}]
}
],
"Documentation":
{
"Description": "The host firmware has failed to boot",
"Message": "The host firmware has failed to boot and has entered a Quiesce state. Look for other errors.",
"Notes": [
"This log indicates that the host firmware has failed to ",
"boot and all retries have been exhausted. There should be ",
"other logs with more details on the boot failure reason. "
]
}
},
{
"Name": "org.open_power.Processor.Error.SbeChipOpFailure",
"Subsystem": "processor_chip",
"ComponentID": "0x3500",
"SRC":
{
"ReasonCode": "0x3500",
"Words6To9":
{
"6":
{
"Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
"AdditionalDataPropSource": "SRC6"
}
}
},
"Documentation":
{
"Description": "chipop failure with SBE provided FFDC",
"Message": "chipop request failure reported by SBE",
"Notes": [
"The severity is set by the creator.",
"Callouts added based on SBE provided FFDC.",
"SBE provided additional debug data included as part of the",
"additional user data section."
]
}
},
{
"Name": "org.open_power.Processor.Error.SbeChipOpTimeout",
"Subsystem": "processor_chip",
"ComponentID": "0x3500",
"SRC":
{
"ReasonCode": "0x3501",
"Words6To9":
{
"6":
{
"Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
"AdditionalDataPropSource": "SRC6"
}
}
},
"Documentation":
{
"Description": "SBE chipop timeout",
"Message": "chipop timeout reported during SBE communication",
"Notes": [
"The severity is set by the creator.",
"Check SBE Dump associated to this error to debug the failure."
]
}
},
{
"Name": "org.open_power.Processor.Error.SbeChipOpInvalidState",
"Subsystem": "processor_chip",
"ComponentID": "0x3500",
"SRC":
{
"ReasonCode": "0x3502",
"Words6To9":
{
"6":
{
"Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
"AdditionalDataPropSource": "SRC6"
},
"7":
{
"Description": "Value of SBE state",
"AdditionalDataPropSource": "SRC7"
}
}
},
"Documentation":
{
"Description": "The SBE on this processor is not in a state where chipOps can be issued",
"Message": "SBE Chipop is not allowed due to invalid SBE state ",
"Notes": [
"The severity is set by the creator."
]
}
},
{
"Name": "org.open_power.Processor.Error.SbeBootFailure",
"Subsystem": "processor_chip",
"ComponentID": "0x3500",
"SRC":
{
"ReasonCode": "0x3503",
"Words6To9":
{
"6":
{
"Description": "[0:15] chip position",
"AdditionalDataPropSource": "SRC6"
}
}
},
"Documentation":
{
"Description": "Boot failure with SBE provided FFDC",
"Message": "Boot failure reported by SBE",
"Notes": [
"The severity is set by the creator.",
"Callouts added based on SBE provided FFDC.",
"SBE provided additional debug data included as part of the",
"additional user data section."
]
}
},
{
"Name": "org.open_power.Processor.Error.SbeBootTimeout",
"Subsystem": "processor_chip",
"ComponentID": "0x3500",
"SRC":
{
"ReasonCode": "0x3504",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "SBE Boot timeout",
"Message": "timeout reported during SBE boot process",
"Notes": [
"The severity is set by the creator.",
"Check SBE Dump associated to this error to debug the failure."
]
}
},
{
"Name": "org.open_power.Attn.Error.Terminate",
"Subsystem": "cec_hardware",
"Severity": "non_error",
"SRC":
{
"ReasonCode": "0xD138",
"SymptomIDFields": [ "SRCWord3", "SRCWord4", "SRCWord5", "SRCWord6", "SRCWord7", "SRCWord8", "SRCWord9" ],
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Status shows TI special attention active",
"Message": "TI special attention detected",
"Notes": [
"This entry is for any TI special attention event ",
"reported by the attention handler component"
]
}
},
{
"Name": "org.open_power.Attn.Error.Fail",
"Subsystem": "bmc_firmware",
"Severity": "unrecoverable_loss_of_function",
"SRC":
{
"ReasonCode": "0xD13E",
"Words6To9":
{
"6":
{
"Description": "Error code from attention handler",
"AdditionalDataPropSource": "ERROR_CODE"
}
}
},
"Documentation":
{
"Description": "The attention handler encountered an error",
"MessageArgSources" : ["SRCWord6"],
"Message": "Attention handler error %1",
"Notes": [
"Attention handler will provide error code"
]
}
},
{
"Name": "org.open_power.Attn.Error.Vital",
"Subsystem": "processor_chip",
"Severity": "critical",
"SRC":
{
"ReasonCode": "0xD16D",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Status shows SBE vital attention active",
"Message": "SBE vital attention detected",
"Notes": [
"This entry is for any SBE vital attention event ",
"reported by the attention handler component"
]
}
},
{
"Name": "org.open_power.HwDiags.Error.Checkstop",
"PossibleSubsystems": [
"processor", "processor_fru", "processor_unit", "processor_bus",
"memory_ctlr", "memory_bus", "memory_dimm", "memory_fru",
"phb", "cec_hardware", "cec_clocks", "cec_tod", "others"
],
"Severity": "unrecoverable",
"ActionFlags": [ "service_action", "report", "call_home" ],
"SRC":
{
"ReasonCode": "0xE510",
"SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Words6To9":
{
"6":
{
"AdditionalDataPropSource": "SRC6"
},
"7":
{
"AdditionalDataPropSource": "SRC7"
},
"8":
{
"AdditionalDataPropSource": "SRC8"
}
}
},
"Documentation":
{
"Description": "A system checkstop attention has occurred",
"MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Message": "Error Signature: %1 %2 %3"
}
},
{
"Name": "org.open_power.HwDiags.Error.Predictive",
"PossibleSubsystems": [
"processor", "processor_fru", "processor_unit", "processor_bus",
"memory_ctlr", "memory_bus", "memory_dimm", "memory_fru",
"phb", "cec_hardware", "cec_clocks", "cec_tod", "others"
],
"Severity": "predictive",
"ActionFlags": [ "service_action", "report", "call_home" ],
"SRC":
{
"ReasonCode": "0xE511",
"SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Words6To9":
{
"6":
{
"AdditionalDataPropSource": "SRC6"
},
"7":
{
"AdditionalDataPropSource": "SRC7"
},
"8":
{
"AdditionalDataPropSource": "SRC8"
}
}
},
"Documentation":
{
"Description": "A hardware attention requiring service has occurred",
"MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Message": "Error Signature: %1 %2 %3"
}
},
{
"Name": "org.open_power.HwDiags.Error.Informational",
"PossibleSubsystems": [
"processor", "processor_fru", "processor_unit", "processor_bus",
"memory_ctlr", "memory_bus", "memory_dimm", "memory_fru",
"phb", "cec_hardware", "cec_clocks", "cec_tod", "others"
],
"Severity": "non_error",
"ActionFlags": [ "hidden", "dont_report" ],
"SRC":
{
"ReasonCode": "0xE512",
"SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Words6To9":
{
"6":
{
"AdditionalDataPropSource": "SRC6"
},
"7":
{
"AdditionalDataPropSource": "SRC7"
},
"8":
{
"AdditionalDataPropSource": "SRC8"
}
}
},
"Documentation":
{
"Description": "Manual analysis was initiated via the command line. FFDC only.",
"MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ],
"Message": "Error Signature: %1 %2 %3"
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.InputFault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15F0",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pwrsply" }
]
}
],
"Documentation": {
"Description": "Power Supply input power fault",
"Message": "A power supply has indicated an input or under voltage condition.",
"Notes": [
"Check the power supply cabling and/or input power ",
"source. The PWRSPLY procedure is used rather than ",
"calling out a location code, as typically these faults ",
"are related to the supplied power, the cable, or the ",
"cable connectors. If the input fault resolves down to an ",
"issue with the power supply itself, the power supply ",
"indicating this input fault should be called out. Add the ",
"CALLOUT_INVENTORY_PATH to the additional data, and set the",
"CALLOUT_PRIORITY to something other than high."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.Fault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15F1",
"Words6To9": {}
},
"Documentation": {
"Description": "Power Supply power fault",
"Message": "The power supply detected a fault condition, see AdditionalData for further details.",
"Notes": [
"The power supply reporting the fault should be called ",
"out using the CALLOUT_INVENTORY_PATH keyword. Include ",
"specific fault, STATUS_* details, and code level in the ",
"AdditionalData section."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.CommFault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15F2",
"Words6To9": {}
},
"Documentation": {
"Description": "Power Supply non-power fault",
"Message": "A communication failure occurred talking to the power supply",
"Notes": [
"Communication problems with the power supply could be ",
"the power supply, or any hardware between it and the ",
"BMC. Reporting the error should be passing in a call ",
"out using CALLOUT_DEVICE_PATH."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.Missing",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15F6",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{
"Priority": "high",
"SymbolicFRUTrusted": "pwrsply",
"UseInventoryLocCode": true
}
]
}
],
"Documentation": {
"Description": "Power Supply is missing",
"Message": "A power supply that should be present is missing",
"Notes": [
"The CalloutList should use the PWRSPLY symbolic FRU ",
"with the trusted location code property. The ",
"location code in this callout is obtained from ",
"the passed in CALLOUT_INVENTORY_PATH value."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.NotSupported",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15F7",
"Words6To9": {}
},
"Documentation": {
"Description": "Power Supply configuration is not supported",
"Message": "The power supply configuration is not supported",
"Notes": [
"The combination of power supplies detected in the ",
"system is not supported. This could be caused by ",
"mismatched models, less than expected number of power ",
"supplies, or other unsupported characteristics."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.FanFault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x15FF",
"Words6To9": {}
},
"Documentation": {
"Description": "Power Supply fan fault",
"Message": "A power supply indicated a fan fault has occurred",
"Notes": [
"The power supply reporting the fault should be called ",
"out using the CALLOUT_INVENTORY_PATH keyword. Include ",
"specific fault, STATUS_* details, and code level in the ",
"AdditionalData section."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.IoutOCFault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x1B01",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "power_overcurrent" }
]
}
],
"Documentation": {
"Description": "Power Supply output over-current power fault",
"Message": "A power supply has indicated an output over-current condition."
}
},
{
"Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Blackout",
"Subsystem": "power",
"ActionFlags": [ "report", "service_action" ],
"Severity": "unrecoverable",
"ComponentID": "0x2700",
"SRC":
{
"Type": "11",
"ReasonCode": "0x00AC",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ac_module"}
]
}
],
"Documentation": {
"Description": "Input power was lost while the system was powered on.",
"Message": "Input power was lost while the system was powered on.",
"Notes": [
"Input power was lost while system powered on.",
"The CalloutList should use the ACMODUL symbolic FRU."
]
}
},
{
"Name": "xyz.openbmc_project.Power.PowerSupply.Error.PSKillFault",
"Subsystem": "power_supply",
"ActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2500",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "power_overcurrent" }
]
}
],
"Documentation": {
"Description": "A power supply fault is potentially preventing the power supply from allowing the system to power on.",
"Message": "Power supply PSKill_fault",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.Shutdown",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2600",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
],
"Documentation": {
"Description": "A power off was issued because a power fault was detected",
"Message": "A power off was issued because a power fault was detected",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Regulator",
"Subsystem": "power_control_hw",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2602",
"Words6To9": {}
},
"Callouts": [
{
"System": "ibm,rainier",
"CalloutList": [
{
"Priority": "high",
"LocCode": "P0-C5"
},
{
"Priority": "medium",
"LocCode": "P0"
}
]
},
{
"System": "ibm,everest",
"CalloutList": [
{
"Priority": "high",
"LocCode": "P0-C59"
},
{
"Priority": "medium",
"LocCode": "P0"
}
]
}
],
"Documentation": {
"Description": "A power off was issued because a regulator for standby power faulted",
"Message": "A power off was issued because a regulator for standby power faulted",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PowerSequencerPGOODFault",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2610",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "INPUT_NAME", "CalloutsWithTheirADValues": [
{
"ADValue": "PCIE_SLOT0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C0" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C1" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT2", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C2" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT3", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C3" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT4", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C4" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT5", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C5" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT6", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C6" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT7", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C7" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT8", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C8" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT9", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C9" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT10", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C10" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PCIE_SLOT11", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C11" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_12A", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12B", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12C", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12D", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12L", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12M", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12N", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12P", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12PCIE", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12Q", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_12R", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "PGOOD_VDN_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VDN_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VCS_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VCS_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VIO_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VIO_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VPCIE_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_VPCIE_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VPCIE", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C58" },
{ "Priority": "medium", "LocCode": "P0-C60" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VPCIE", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C16" },
{ "Priority": "medium", "LocCode": "P0-C13" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VPCIE", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C16" },
{ "Priority": "medium", "LocCode": "P0-C20" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VPCIE", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C58" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "0V_USB_front", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "usb_pgood" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VDN", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C63" },
{ "Priority": "medium", "LocCode": "P0-C60" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VDN", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C12" },
{ "Priority": "medium", "LocCode": "P0-C13" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VDN", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C21" },
{ "Priority": "medium", "LocCode": "P0-C20" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VDN", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C54" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VIO", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C63" },
{ "Priority": "medium", "LocCode": "P0-C60" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VIO", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C12" },
{ "Priority": "medium", "LocCode": "P0-C13" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VIO", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C21" },
{ "Priority": "medium", "LocCode": "P0-C20" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VIO", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C54" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "PGOOD_PSU1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "E0" }
]
}
]
},
{
"ADValue": "PGOOD_PSU2", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "E1" }
]
}
]
},
{
"ADValue": "PGOOD_PSU3", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "E2" }
]
}
]
},
{
"ADValue": "PGOOD_PSU4", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "E3" }
]
}
]
}
]
},
"Documentation": {
"Description": "The power sequencer chip detected a PGOOD fault",
"Message": "The power sequencer chip detected a PGOOD fault",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2620",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "RAIL_NAME", "CalloutsWithTheirADValues": [
{
"ADValue": "12.0V", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "5.0V_USB", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "usb_pgood" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "5.0V_DASD", "Callouts": [
{
"CalloutList": [
{ "Priority": "medium", "LocCode": "P1" },
{ "Priority": "medium", "LocCode": "P2" },
{ "Priority": "medium", "LocCode": "P3" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "3.3VA", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "3.3VB", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "3V3IO", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C17" }
]
}
]
},
{
"ADValue": "1.5V", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "1.1V", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "VDDA_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "VDDB_DCM0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C15" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "VDDA_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "VDDB_DCM1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C23" },
{ "Priority": "medium", "LocCode": "P0-C24" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP03_AVDD", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C58" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "medium", "LocCode": "P0-C61" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP12_AVDD", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C16" },
{ "Priority": "medium", "LocCode": "P0-C14" },
{ "Priority": "medium", "LocCode": "P0-C19" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VDD0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C62" },
{ "Priority": "medium", "LocCode": "P0-C61" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VDD1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C60" },
{ "Priority": "medium", "LocCode": "P0-C61" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VDD0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C13" },
{ "Priority": "medium", "LocCode": "P0-C14" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VDD1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C15" },
{ "Priority": "medium", "LocCode": "P0-C14" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VDD0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C18" },
{ "Priority": "medium", "LocCode": "P0-C19" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VDD1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C20" },
{ "Priority": "medium", "LocCode": "P0-C19" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VDD0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C57" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VDD1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C55" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VCS0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C63" },
{ "Priority": "medium", "LocCode": "P0-C61" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP0_VCS1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C59" },
{ "Priority": "medium", "LocCode": "P0-C61" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VCS0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C12" },
{ "Priority": "medium", "LocCode": "P0-C14" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP1_VCS1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C16" },
{ "Priority": "medium", "LocCode": "P0-C14" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VCS0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C17" },
{ "Priority": "medium", "LocCode": "P0-C19" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP2_VCS1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C21" },
{ "Priority": "medium", "LocCode": "P0-C19" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VCS0", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C58" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "CP3_VCS1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0-C54" },
{ "Priority": "medium", "LocCode": "P0-C56" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "12.0VCS", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "3.3VCS", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "1.1V_Current", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "5.0V_USB_Current", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "usb_pgood" },
{ "Priority": "medium", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "5.0V_DASD_Current", "Callouts": [
{
"CalloutList": [
{ "Priority": "medium", "LocCode": "P1" },
{ "Priority": "medium", "LocCode": "P2" },
{ "Priority": "medium", "LocCode": "P3" },
{ "Priority": "low", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "12.0VN", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "12.0VP", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "12.0VQ", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "12.0VR", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "pgood_part" }
]
}
]
},
{
"ADValue": "ThermalDiode1", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "ThermalDiode2", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "ThermalDiode3", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
},
{
"ADValue": "ThermalDiode4", "Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
]
}
]
},
"Documentation": {
"Description": "The power sequencer chip detected a voltage fault",
"Message": "The power sequencer chip detected a voltage fault",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.N",
"Subsystem": "power",
"Severity": "predictive_redundancy_loss",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2700",
"Words6To9": {}
},
"Documentation": {
"Description": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)",
"Message": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)",
"Notes": [
"CALLOUT_INVENTORY_PATH should be specified in the ",
"AdditionalData property of the event log so that ",
"the device is called out but not the communication path."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.NPlus1",
"Subsystem": "power",
"Severity": "non_error",
"MfgSeverity": "predictive_redundancy_loss",
"ActionFlags": ["report"],
"MfgActionFlags": ["service_action", "report", "call_home"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2701",
"Words6To9": {}
},
"Documentation": {
"Description": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)",
"Message": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)",
"Notes": [
"CALLOUT_INVENTORY_PATH should be specified in the ",
"AdditionalData property of the event log so that ",
"the device is called out but not the communication path."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Regulators.Error.WriteVerification",
"Subsystem": "power",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x2900",
"Words6To9": {}
},
"Documentation": {
"Description": "A write verification error occurred on a device",
"Message": "A write verification error occurred on a device",
"Notes": [
"This error occurs when a device register is written, ",
"read back, and the two values do not match. This is ",
"also called a read-back error. The device should be ",
"identified using the CALLOUT_DEVICE_PATH or ",
"CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR keywords in the ",
"AdditionalData property of the event log. This will ",
"cause the device and the hardware in the communication ",
"path to be called out."
]
}
},
{
"Name": "xyz.openbmc_project.Power.UPS.Error.Battery.Discharging",
"Subsystem": "power",
"Severity": "non_error",
"ActionFlags": ["report"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x4201",
"Words6To9": {}
},
"Documentation": {
"Description": "The Uninterruptible Power Supply (UPS) battery is discharging and providing power to the system due to a utility failure",
"Message": "The Uninterruptible Power Supply (UPS) battery is discharging and providing power to the system due to a utility failure",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.UPS.Error.Battery.Low",
"Subsystem": "power",
"Severity": "non_error",
"ActionFlags": ["report"],
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0x4203",
"Words6To9": {}
},
"Documentation": {
"Description": "The Uninterruptible Power Supply (UPS) battery level is low",
"Message": "The Uninterruptible Power Supply (UPS) battery level is low",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile",
"Subsystem": "power",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xA013",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "A regulators configuration file error occurred",
"Message": "A regulators configuration file error occurred",
"Notes": [
"The regulators configuration file could not be found, ",
"could not be read, or had invalid contents."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile.Critical",
"Subsystem": "power",
"Severity": "critical_system_term",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xA014",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "A critical regulators configuration file error occurred",
"Message": "A critical regulators configuration file error occurred",
"Notes": [
"The regulators configuration file could not be found, ",
"could not be read, or had invalid contents. As a result ",
"voltage regulators could not be configured, and the ",
"chassis could not be powered on."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PowerSequencerFault",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xD000",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
],
"Documentation": {
"Description": "The power sequencer chip detected a fault",
"Message": "The power sequencer chip detected a fault",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PowerOnTimeout",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"Severity": "critical",
"SRC": {
"Type": "11",
"ReasonCode": "0xD002",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
],
"Documentation": {
"Description": "System power failed to turn on within timeout period",
"Message": "System power failed to turn on within timeout period",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PowerOffTimeout",
"Subsystem": "power_sequencer",
"ComponentID": "0x2700",
"Severity": "critical",
"SRC": {
"Type": "11",
"ReasonCode": "0xD008",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
],
"Documentation": {
"Description": "System power failed to turn off within timeout period",
"Message": "System power failed to turn off within timeout period",
"Notes": [
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.Internal",
"Subsystem": "power",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xE000",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "An internal firmware error occurred",
"Message": "An internal firmware error occurred",
"Notes": [
"The error details must be provided in the AdditionalData ",
"property of the event log."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.I2C",
"Subsystem": "cec_i2c",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xE100",
"Words6To9": {}
},
"Documentation": {
"Description": "An I2C error occurred communicating with a device",
"Message": "An I2C error occurred communicating with a device",
"Notes": [
"The device should be identified using the ",
"CALLOUT_DEVICE_PATH or CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR ",
"keywords in the AdditionalData property of the event ",
"log. This will cause the device and the hardware in the ",
"communication path to be called out."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.PMBus",
"Subsystem": "power",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xE200",
"Words6To9": {}
},
"Documentation": {
"Description": "A PMBus error occurred on a device",
"Message": "A PMBus error occurred on a device",
"Notes": [
"This error occurs when the I2C communication was ",
"successful, but the PMBus value read is invalid or ",
"unsupported. CALLOUT_INVENTORY_PATH should be specified ",
"in the AdditionalData property of the event log so that ",
"the device is called out but not the communication path."
]
}
},
{
"Name": "xyz.openbmc_project.Power.Error.DBus",
"Subsystem": "power",
"ComponentID": "0x2700",
"SRC": {
"Type": "11",
"ReasonCode": "0xE300",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "A firmware inter-process communication (D-Bus) error occurred",
"Message": "A firmware inter-process communication (D-Bus) error occurred"
}
},
{
"Name": "xyz.openbmc_project.Fan.Error.Fault",
"Subsystem": "power_fans",
"ComponentID": "0x2800",
"SRC": {
"Type": "11",
"ReasonCode": "0x76F0",
"Words6To9": {}
},
"Documentation": {
"Description": "Fan rotor fault",
"Message": "Fan rotor fault",
"Notes": [
"This error occurs when a fan rotor has been faulted for a ",
"certain amount of time. The callout is the fan which is ",
"passed in with CALLOUT_INVENTORY_PATH. The severity is ",
"passed in during creation and will be either informational ",
"or unrecoverable. The action flags use the defaults and ",
"vary based on the severity."
]
}
},
{
"Name": "xyz.openbmc_project.Fan.Error.Missing",
"Subsystem": "power_fans",
"ComponentID": "0x2800",
"Severity": "unrecoverable_redundancy_loss",
"ActionFlags": ["service_action", "report", "call_home"],
"SRC": {
"Type": "11",
"ReasonCode": "0x76F1",
"Words6To9": {}
},
"Callouts": [
{
"System": "ibm,rainier",
"CalloutList": [
{
"Priority": "high",
"SymbolicFRUTrusted": "air_mover",
"UseInventoryLocCode": true
},
{
"Priority": "low",
"LocCode": "P0"
}
]
},
{
"System": "ibm,everest",
"CalloutList": [
{
"Priority": "high",
"SymbolicFRUTrusted": "air_mover",
"UseInventoryLocCode": true
},
{
"Priority": "low",
"LocCode": "P1"
}
]
}
],
"Documentation": {
"Description": "A fan is missing",
"Message": "A fan is missing",
"Notes": [
"This error occurs when a fan has been missing for a ",
"certain amount of time. The first callout is the ",
"symbolic FRU AIR_MOVR that has the trusted fan location ",
"code, which it gets using the passed in ",
"CALLOUT_INVENTORY_PATH. The second callout is the FRU ",
"where the controller and GPIO expander are."
]
}
},
{
"Name": "xyz.openbmc_project.Fan.Presence.Error.Detection",
"ComponentID": "0x2800",
"Subsystem": "power_fans",
"Severity": "non_error",
"ActionFlags": ["report"],
"MfgSeverity": "predictive",
"MfgActionFlags": ["service_action", "report"],
"SRC": {
"Type": "11",
"ReasonCode": "0x76F2",
"Words6To9": {}
},
"Callouts": [
{
"System": "ibm,rainier",
"CalloutList": [
{"Priority": "medium", "LocCode": "P0"}
]
},
{
"System": "ibm,everest",
"CalloutList": [
{"Priority": "medium", "LocCode": "P1"}
]
}
],
"Documentation": {
"Description": "Presence detect methods for the same fan disagree",
"Message": "Presence detect methods for the same fan disagree",
"Notes": [
"This error occurs when there is more than one way to detect",
"fan presence, and they don't all agree. For example, the",
"GPIO says a fan isn't present, but the tach readings are",
"nonzero. This is informational, unless in manufacturing.",
"The fan FRU is passed in as a high priority callout.",
"The FRU the GPIO source is on is called out medium."
]
}
},
{
"Name": "xyz.openbmc_project.Fan.Error.FanControllerOffline",
"ComponentID": "0x2800",
"Subsystem": "power_fans",
"Severity": "critical_system_term",
"ActionFlags": ["service_action", "report", "call_home"],
"SRC": {
"Type": "11",
"ReasonCode": "0x76F3",
"Words6To9": {}
},
"Callouts": [
{
"System": "ibm,rainier",
"CalloutList": [
{"Priority": "high", "LocCode": "P0-C5"},
{"Priority": "medium_group_a", "LocCode": "P0-T12", "SymbolicFRUTrusted": "fan_cable"},
{"Priority": "medium_group_a", "LocCode": "P0-T17", "SymbolicFRUTrusted": "cable_continued"},
{"Priority": "low", "LocCode": "P0"}
]
},
{
"System": "ibm,everest",
"CalloutList": [
{"Priority": "high", "LocCode": "P0-C0"},
{"Priority": "medium", "LocCode": "P1"},
{"Priority": "low", "LocCode": "P0"}
]
}
],
"Documentation": {
"Description": "The fan controller device is offline",
"Message": "The fan controller is offline. The system must be powered off.",
"Notes": [
"The device that controls the fans is offline so the fan",
"targets and speeds are unknown. The system will be shut",
"down to preserve thermal safety. There may be an I2C",
"or power problem with the device."
]
}
},
{
"Name": "xyz.openbmc_project.Fan.Presence.Error.GPIODeviceUnavailable",
"Subsystem": "power_fans",
"ComponentID": "0x2800",
"Severity": "unrecoverable_redundancy_loss",
"ActionFlags": ["service_action", "report", "call_home"],
"SRC": {
"Type": "11",
"ReasonCode": "0x76F4",
"Words6To9": {}
},
"Callouts": [
{
"System" : "ibm,rainier",
"CalloutList": [
{"Priority": "high", "LocCode": "P0-C5"},
{"Priority": "medium_group_a", "LocCode": "P0-T12","SymbolicFRUTrusted": "fan_cable"},
{"Priority": "medium_group_a", "LocCode": "P0-T17","SymbolicFRUTrusted": "cable_continued"},
{"Priority": "low", "LocCode": "P0"}
]
},
{
"System" : "ibm,everest",
"CalloutList": [
{"Priority": "high", "LocCode": "P0-C0"},
{"Priority": "medium", "LocCode": "P1"},
{"Priority": "low", "LocCode": "P0"}
]
}
],
"Documentation": {
"Description": "Fan GPIO sensors not present",
"Message": "Fan GPIO sensors not present",
"Notes": [
"The device that reports fan presence is not functioning."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHigh",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2801",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor exceeded its performance loss threshold.",
"Message": "A temperature sensor exceeded its performance loss threshold.",
"Notes": [
"A temperature sensor crossed its performance loss threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added.",
"Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
"a FRU callout."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHighClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x2802",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor is under its performance loss threshold.",
"Message": "A temperature sensor is under its performance loss threshold.",
"Notes": [
"A temperature sensor crossed under its performance loss threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHigh",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2803",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor exceeded its warning threshold.",
"Message": "A temperature sensor exceeded its warning threshold.",
"Notes": [
"A temperature sensor crossed its warning threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added.",
"Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
"a FRU callout."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHighClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x2804",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor is under its warning threshold.",
"Message": "A temperature sensor is under its warning threshold.",
"Notes": [
"A temperature sensor crossed under its warning threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHigh",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2805",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor exceeded its critical threshold.",
"Message": "A temperature sensor exceeded its critical threshold.",
"Notes": [
"A temperature sensor crossed its critical threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added.",
"Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
"a FRU callout."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHighClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x2806",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
]
}
]
}
]
},
"Documentation": {
"Description": "A temperature sensor is under its critical threshold.",
"Message": "A temperature sensor is under its critical threshold.",
"Notes": [
"A temperature sensor crossed under its critical threshold value",
"If it is the ambient sensor, then a symbolic FRU will be added."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHigh",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2807",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{
"Priority": "high",
"SymbolicFRU": "ambient_temp"
}
]
}
],
"Documentation": {
"Description": "The ambient temperature passed the EPOW3 limit.",
"Message": "The ambient temperature passed the EPOW3 limit. The system will shut down if temp doesn't decrease.",
"Notes": [
"This error occurs when the ambient temperature surpassed",
"the EPOW3 shutdown limit."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHighClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x2808",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{
"Priority": "high",
"SymbolicFRU": "ambient_temp_back"
}
]
}
],
"Documentation": {
"Description": "The ambient temperature is back under the EPOW3 limit.",
"Message": "The ambient temperature is back under the EPOW3 limit."
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.HardShutdownAlarmHigh",
"Subsystem": "power",
"ComponentID": "0x2800",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2809",
"Words6To9": {}
},
"Callouts": [
{
"CalloutList": [
{
"Priority": "high",
"SymbolicFRU": "ambient_temp"
}
]
}
],
"Documentation": {
"Description": "The ambient temperature passed the EPOW4 limit.",
"Message": "The ambient temperature passed the EPOW4 limit. The system will shut down",
"Notes": [
"This error occurs when the ambient temperature surpassed",
"the EPOW4 shutdown limit."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHigh",
"Subsystem": "ext_env",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x280A",
"Words6To9": {}
},
"CalloutsUsingAD": {
"ADName": "SENSOR_NAME",
"CalloutsWithTheirADValues": [
{
"ADValue": "/xyz/openbmc_project/sensors/altitude/Altitude",
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "SymbolicFRU": "altitude" }
]
}
]
}
]
},
"Documentation": {
"Description": "An altitude sensor exceeded its warning threshold.",
"Message": "An altitude sensor exceeded its warning threshold.",
"Notes": [
"The virtual altitude sensor crossed its warning threshold value",
" and a symbolic FRU will be added."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHighClear",
"Subsystem": "ext_env",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x280B",
"Words6To9": {}
},
"Documentation": {
"Description": "An altitude sensor is under its warning threshold.",
"Message": "An altitude sensor is under its warning threshold.",
"Notes": [
"The virtual altitude sensor is under its warning threshold value",
" and a symbolic FRU will be added."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLow",
"Subsystem": "cec_tod",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x280C",
"Words6To9": {}
},
"Documentation": {
"Description": "A voltage sensor went below its critical low threshold.",
"Message": "A voltage sensor went below its critical low threshold."
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLowClear",
"Subsystem": "cec_tod",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"SRC": {
"ReasonCode": "0x280D",
"Words6To9": {}
},
"Documentation": {
"Description": "A voltage sensor is over its critical low threshold.",
"Message": "A voltage sensor is over its critical low threshold."
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningLow",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x280E",
"Words6To9": {}
},
"Documentation": {
"Description": "A temperature sensor is under its low warning threshold.",
"Message": "A temperature sensor is under its low warning threshold.",
"Notes": [
"A temperature sensor crossed its low warning threshold value",
"CALLOUT_INVENTORY_PATH will be passed in to add a FRU callout."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningLowClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x280F",
"Words6To9": {}
},
"Documentation": {
"Description": "A temperature sensor is above its low warning threshold.",
"Message": "A temperature sensor is above its low warning threshold.",
"Notes": [
"A temperature sensor crossed above its low warning threshold value."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalLow",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "predictive",
"ActionFlags": ["service_action", "report"],
"SRC": {
"ReasonCode": "0x2810",
"Words6To9": {}
},
"Documentation": {
"Description": "A temperature sensor is under its low critical threshold.",
"Message": "A temperature sensor is under its low critical threshold.",
"Notes": [
"A temperature sensor crossed its low critical threshold value",
"CALLOUT_INVENTORY_PATH will be passed in to add a FRU callout."
]
}
},
{
"Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalLowClear",
"Subsystem": "power",
"ComponentID": "0x2800",
"Severity": "non_error",
"ActionFlags": ["report"],
"EventType": "env_normal",
"SRC": {
"ReasonCode": "0x2811",
"Words6To9": {}
},
"Documentation": {
"Description": "A temperature sensor is over its low critical threshold.",
"Message": "A temperature sensor is over its low critical threshold.",
"Notes": [
"A temperature sensor crossed above its critical threshold value"
]
}
},
{
"Name": "com.ibm.VPD.Error.InvalidEepromPath",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4000",
"Words6To9":
{
"6":
{
"Description": "Errno of the failure.",
"AdditionalDataPropSource": "CALLOUT_ERRNO"
}
}
},
"Documentation": {
"Description": "A path access error ocurred",
"Message": "An EEPROM path access error occurred.",
"Notes": [
"This error occurs when parser is unable to access",
"EEPROM path. Errno and device path are captured as",
"additional data."
]
}
},
{
"Name": "com.ibm.VPD.Error.InvalidVPD",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4001",
"Words6To9":
{
}
},
"Documentation": {
"Description": "Invalid VPD data.",
"Message": "A VPD data exception occurred.",
"Notes": [
"This error occurs when VPD data is found to be",
"invalid. This can be when VPD file is missing out",
"mandatory records.Inventory path is captured in",
"additional data."
]
}
},
{
"Name": "com.ibm.VPD.Error.EccCheckFailed",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4002",
"Words6To9":
{
}
},
"Documentation": {
"Description": "Invalid VPD ecc data.",
"Message": "A VPD ecc exception occurred.",
"Notes": [
"This error occurs when VPD ecc check fails for the FRU.",
"Inventory path for the failed FRU is captured in additonal",
"data."
]
}
},
{
"Name": "com.ibm.VPD.Error.InvalidJson",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4003",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "Invalid Json",
"Message": "A Json failure occurred.",
"Notes": [
"This error occurs when parser fails to access",
"Json file or there is any issue with Json data.",
"Failed Json path and cause of failure is captured",
"in additional data."
]
}
},
{
"Name": "com.ibm.VPD.Error.BlankSystemVPD",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4004",
"Words6To9":
{
}
},
"Documentation": {
"Description": "System VPD restore failed",
"Message": "A system VPD restoration error occurred.",
"Notes": [
"This error occurs when restoring of system VPD fails.",
"The FRU path and reason for failure is captured in",
"additional data."
]
}
},
{
"Name": "com.ibm.VPD.Error.DbusFailure",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4005",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation": {
"Description": "Dbus exception",
"Message": "A Dbus internal error occurred.",
"Notes": [
"This error occurs when Dbus operation fails.",
"Exceptions details are captured in additonal",
"data."
]
}
},
{
"Name": "com.ibm.VPD.Error.UnknownSystemType",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4006",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "LocCode": "P0" }
]
}
],
"Documentation": {
"Description": "Unknown System Type",
"Message": "System type not supported in DTB table.",
"Notes": [
"System type comes from combination of HW and IM value of system VPD.",
"If anything gets changed in that combination, then it can't determine",
"the appropriate DTB for that system. Need to check HW and IM keywords."
]
}
},
{
"Name": "com.ibm.VPD.Error.GPIOError",
"Subsystem": "cec_vpd",
"ComponentID": "0x4000",
"SRC": {
"ReasonCode": "0x4007",
"Words6To9":
{
}
},
"Documentation": {
"Description": "GPIO line error",
"Message": "GPIO line couldn't be found or read.",
"Notes": [
"The BMC could not access a GPIO line. This generally means that the",
" hardware had issues toggling the line and/or the device driver has",
" not exposed the GPIO line to userspace due to underlying I2C issues.",
" The I2C path will be called out."
]
}
},
{
"Name": "org.open_power.Host.Boot.Error.WatchdogTimeout",
"Subsystem": "cec_sp_hostboot_iface",
"SRC":
{
"ReasonCode": "0xC101",
"Words6To9":
{
}
},
"Documentation":
{
"Description": "Host did not respond within the watchdog timeout interval",
"Message": "Host did not respond before the watchdog timeout interval expired",
"Notes": [
"Host did not respond before the expiry of the watchdog timeout interval.",
"Collecting hostboot dump."
]
}
},
{
"Name": "xyz.openbmc_project.Software.Version.Error.Incompatible",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3601",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "A system component has a software version that is incompatible.",
"Message": "A system component has a software version that is incompatible."
}
},
{
"Name": "xyz.openbmc_project.Software.Version.Error.AlreadyExists",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3602",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "This image version already exists on the device.",
"Message": "This image version already exists on the device."
}
},
{
"Name": "xyz.openbmc_project.Software.Image.Error.UnTarFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3603",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "An error occurred during untar.",
"Message": "An error occurred during untar."
}
},
{
"Name": "xyz.openbmc_project.Software.Image.Error.ManifestFileFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3604",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "An error when reading the Manifest file..",
"Message": "An error when reading the Manifest file.."
}
},
{
"Name": "xyz.openbmc_project.Software.Image.Error.InternalFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3605",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "The operation failed internally during processing the image.",
"Message": "The operation failed internally during processing the image."
}
},
{
"Name": "xyz.openbmc_project.Software.Image.Error.ImageFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3606",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "An error occurred processing the image.",
"Message": "An error occurred processing the image."
}
},
{
"Name": "xyz.openbmc_project.Software.Image.Error.BusyFailure",
"Subsystem": "bmc_firmware",
"ComponentID": "0x3600",
"SRC":
{
"ReasonCode": "0x3607",
"Words6To9":
{
}
},
"Callouts": [
{
"CalloutList": [
{ "Priority": "high", "Procedure": "bmc_code" }
]
}
],
"Documentation":
{
"Description": "The device is busy during the update.",
"Message": "The device is busy during the update."
}
}
]
}