| /** |
| * Copyright © 2019 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include "pldm_interface.hpp" |
| |
| #include <libpldm/base.h> |
| #include <libpldm/file_io.h> |
| #include <unistd.h> |
| |
| #include <fstream> |
| #include <phosphor-logging/log.hpp> |
| |
| namespace openpower::pels |
| { |
| |
| using namespace phosphor::logging; |
| using namespace sdeventplus; |
| using namespace sdeventplus::source; |
| |
| constexpr auto eidPath = "/usr/share/pldm/host_eid"; |
| constexpr mctp_eid_t defaultEIDValue = 9; |
| |
| constexpr uint16_t pelFileType = 0; |
| |
| PLDMInterface::~PLDMInterface() |
| { |
| closeFD(); |
| } |
| |
| void PLDMInterface::closeFD() |
| { |
| if (_fd >= 0) |
| { |
| close(_fd); |
| _fd = -1; |
| } |
| } |
| |
| void PLDMInterface::readEID() |
| { |
| _eid = defaultEIDValue; |
| |
| std::ifstream eidFile{eidPath}; |
| if (!eidFile.good()) |
| { |
| log<level::ERR>("Could not open host EID file"); |
| } |
| else |
| { |
| std::string eid; |
| eidFile >> eid; |
| if (!eid.empty()) |
| { |
| _eid = atoi(eid.c_str()); |
| } |
| else |
| { |
| log<level::ERR>("EID file was empty"); |
| } |
| } |
| } |
| |
| void PLDMInterface::open() |
| { |
| _fd = pldm_open(); |
| if (_fd < 0) |
| { |
| auto e = errno; |
| log<level::ERR>("pldm_open failed", entry("ERRNO=%d", e), |
| entry("RC=%d\n", _fd)); |
| throw std::exception{}; |
| } |
| } |
| |
| CmdStatus PLDMInterface::sendNewLogCmd(uint32_t id, uint32_t size) |
| { |
| try |
| { |
| closeFD(); |
| |
| open(); |
| |
| readInstanceID(); |
| |
| registerReceiveCallback(); |
| |
| doSend(id, size); |
| } |
| catch (const std::exception& e) |
| { |
| closeFD(); |
| |
| _inProgress = false; |
| _source.reset(); |
| return CmdStatus::failure; |
| } |
| |
| _inProgress = true; |
| _receiveTimer.restartOnce(_receiveTimeout); |
| return CmdStatus::success; |
| } |
| |
| void PLDMInterface::registerReceiveCallback() |
| { |
| _source = std::make_unique<IO>( |
| _event, _fd, EPOLLIN, |
| std::bind(std::mem_fn(&PLDMInterface::receive), this, |
| std::placeholders::_1, std::placeholders::_2, |
| std::placeholders::_3)); |
| } |
| |
| void PLDMInterface::readInstanceID() |
| { |
| try |
| { |
| _instanceID = _dataIface.getPLDMInstanceID(_eid); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>( |
| "Failed to get instance ID from PLDM Requester D-Bus daemon", |
| entry("ERROR=%s", e.what())); |
| throw; |
| } |
| } |
| |
| void PLDMInterface::doSend(uint32_t id, uint32_t size) |
| { |
| std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(pelFileType) + |
| sizeof(id) + sizeof(uint64_t)> |
| requestMsg; |
| |
| auto request = reinterpret_cast<pldm_msg*>(requestMsg.data()); |
| |
| auto rc = encode_new_file_req(_instanceID, pelFileType, id, size, request); |
| if (rc != PLDM_SUCCESS) |
| { |
| log<level::ERR>("encode_new_file_req failed", entry("RC=%d", rc)); |
| throw std::exception{}; |
| } |
| |
| rc = pldm_send(_eid, _fd, requestMsg.data(), requestMsg.size()); |
| if (rc < 0) |
| { |
| auto e = errno; |
| log<level::ERR>("pldm_send failed", entry("RC=%d", rc), |
| entry("ERRNO=%d", e)); |
| |
| throw std::exception{}; |
| } |
| } |
| |
| void PLDMInterface::receive(IO& io, int fd, uint32_t revents) |
| { |
| if (!(revents & EPOLLIN)) |
| { |
| return; |
| } |
| |
| uint8_t* responseMsg = nullptr; |
| size_t responseSize = 0; |
| ResponseStatus status = ResponseStatus::success; |
| |
| auto rc = pldm_recv(_eid, fd, _instanceID, &responseMsg, &responseSize); |
| if (rc < 0) |
| { |
| if (rc == PLDM_REQUESTER_INSTANCE_ID_MISMATCH) |
| { |
| // We got a response to someone else's message. Ignore it. |
| return; |
| } |
| else if (rc == PLDM_REQUESTER_NOT_RESP_MSG) |
| { |
| // Due to the MCTP loopback, we may get notified of the message |
| // we just sent. |
| return; |
| } |
| |
| auto e = errno; |
| log<level::ERR>("pldm_recv failed", entry("RC=%d", rc), |
| entry("ERRNO=%d", e)); |
| status = ResponseStatus::failure; |
| |
| responseMsg = nullptr; |
| } |
| |
| _inProgress = false; |
| _receiveTimer.setEnabled(false); |
| closeFD(); |
| _source.reset(); |
| |
| if (status == ResponseStatus::success) |
| { |
| uint8_t completionCode = 0; |
| auto response = reinterpret_cast<pldm_msg*>(responseMsg); |
| |
| auto decodeRC = decode_new_file_resp(response, PLDM_NEW_FILE_RESP_BYTES, |
| &completionCode); |
| if (decodeRC < 0) |
| { |
| log<level::ERR>("decode_new_file_resp failed", |
| entry("RC=%d", decodeRC)); |
| status = ResponseStatus::failure; |
| } |
| else |
| { |
| if (completionCode != PLDM_SUCCESS) |
| { |
| log<level::ERR>("Bad PLDM completion code", |
| entry("COMPLETION_CODE=%d", completionCode)); |
| status = ResponseStatus::failure; |
| } |
| } |
| } |
| |
| if (_responseFunc) |
| { |
| try |
| { |
| (*_responseFunc)(status); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>("PLDM response callback threw an exception", |
| entry("ERROR=%s", e.what())); |
| } |
| } |
| |
| if (responseMsg) |
| { |
| free(responseMsg); |
| } |
| } |
| |
| void PLDMInterface::receiveTimerExpired() |
| { |
| log<level::ERR>("Timed out waiting for PLDM response"); |
| cancelCmd(); |
| |
| if (_responseFunc) |
| { |
| try |
| { |
| (*_responseFunc)(ResponseStatus::failure); |
| } |
| catch (const std::exception& e) |
| { |
| log<level::ERR>("PLDM response callback threw an exception", |
| entry("ERROR=%s", e.what())); |
| } |
| } |
| } |
| |
| void PLDMInterface::cancelCmd() |
| { |
| _inProgress = false; |
| _source.reset(); |
| |
| if (_receiveTimer.isEnabled()) |
| { |
| _receiveTimer.setEnabled(false); |
| } |
| |
| closeFD(); |
| } |
| |
| } // namespace openpower::pels |