| /** |
| * Copyright © 2019 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include "extensions/openpower-pels/registry.hpp" |
| |
| #include <nlohmann/json.hpp> |
| |
| #include <filesystem> |
| #include <fstream> |
| |
| #include <gtest/gtest.h> |
| |
| using namespace openpower::pels::message; |
| using namespace openpower::pels; |
| namespace fs = std::filesystem; |
| |
| const auto registryData = R"( |
| { |
| "PELs": |
| [ |
| { |
| "Name": "xyz.openbmc_project.Power.Fault", |
| "Subsystem": "power_supply", |
| |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| |
| "Documentation": |
| { |
| "Description": "A PGOOD Fault", |
| "Message": "PS had a PGOOD Fault" |
| } |
| }, |
| |
| { |
| "Name": "xyz.openbmc_project.Power.OverVoltage", |
| "Subsystem": "power_control_hw", |
| "Severity": |
| [ |
| { |
| "System": "systemA", |
| "SevValue": "unrecoverable" |
| }, |
| { |
| "System": "systemB", |
| "SevValue": "recovered" |
| }, |
| { |
| "SevValue": "predictive" |
| } |
| ], |
| "MfgSeverity": "non_error", |
| "ActionFlags": ["service_action", "report", "call_home"], |
| "MfgActionFlags": ["hidden"], |
| |
| "SRC": |
| { |
| "ReasonCode": "0x2333", |
| "Type": "BD", |
| "SymptomIDFields": ["SRCWord5", "SRCWord6", "SRCWord7"], |
| "Words6To9": |
| { |
| "6": |
| { |
| "Description": "Failing unit number", |
| "AdditionalDataPropSource": "PS_NUM" |
| }, |
| |
| "7": |
| { |
| "Description": "bad voltage", |
| "AdditionalDataPropSource": "VOLTAGE" |
| } |
| }, |
| "DeconfigFlag": true, |
| "CheckstopFlag": true |
| }, |
| |
| "Documentation": |
| { |
| "Description": "A PGOOD Fault", |
| "Message": "PS %1 had a PGOOD Fault", |
| "MessageArgSources": |
| [ |
| "SRCWord6" |
| ], |
| "Notes": [ |
| "In the UserData section there is a JSON", |
| "dump that provides debug information." |
| ] |
| }, |
| |
| "JournalCapture": |
| { |
| "NumLines": 7 |
| } |
| }, |
| |
| { |
| "Name": "xyz.openbmc_project.Common.Error.Timeout", |
| "PossibleSubsystems": ["processor", "memory"], |
| |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Documentation": |
| { |
| "Description": "A PGOOD Fault", |
| "Message": "PS had a PGOOD Fault" |
| } |
| }, |
| |
| { |
| "Name": "xyz.openbmc_project.Journal.Capture", |
| "Subsystem": "power_supply", |
| |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| |
| "Documentation": |
| { |
| "Description": "journal capture test", |
| "Message": "journal capture test" |
| }, |
| |
| "JournalCapture": |
| { |
| "Sections": [ |
| { |
| "NumLines": 5, |
| "SyslogID": "test1" |
| }, |
| { |
| "NumLines": 6, |
| "SyslogID": "test2" |
| } |
| ] |
| } |
| } |
| ] |
| } |
| )"; |
| |
| class RegistryTest : public ::testing::Test |
| { |
| protected: |
| static void SetUpTestCase() |
| { |
| char path[] = "/tmp/regtestXXXXXX"; |
| regDir = mkdtemp(path); |
| } |
| |
| static void TearDownTestCase() |
| { |
| fs::remove_all(regDir); |
| } |
| |
| static std::string writeData(const char* data) |
| { |
| fs::path path = regDir / "registry.json"; |
| std::ofstream stream{path}; |
| stream << data; |
| return path; |
| } |
| |
| static fs::path regDir; |
| }; |
| |
| fs::path RegistryTest::regDir{}; |
| |
| TEST_F(RegistryTest, TestNoEntry) |
| { |
| auto path = RegistryTest::writeData(registryData); |
| Registry registry{path}; |
| |
| auto entry = registry.lookup("foo", LookupType::name); |
| EXPECT_FALSE(entry); |
| } |
| |
| TEST_F(RegistryTest, TestFindEntry) |
| { |
| auto path = RegistryTest::writeData(registryData); |
| Registry registry{path}; |
| |
| auto entry = registry.lookup("xyz.openbmc_project.Power.OverVoltage", |
| LookupType::name); |
| ASSERT_TRUE(entry); |
| EXPECT_EQ(entry->name, "xyz.openbmc_project.Power.OverVoltage"); |
| EXPECT_EQ(entry->subsystem, 0x62); |
| |
| ASSERT_EQ(entry->severity->size(), 3); |
| EXPECT_EQ((*entry->severity)[0].severity, 0x40); |
| EXPECT_EQ((*entry->severity)[0].system, "systemA"); |
| EXPECT_EQ((*entry->severity)[1].severity, 0x10); |
| EXPECT_EQ((*entry->severity)[1].system, "systemB"); |
| EXPECT_EQ((*entry->severity)[2].severity, 0x20); |
| EXPECT_EQ((*entry->severity)[2].system, ""); |
| |
| EXPECT_EQ(entry->mfgSeverity->size(), 1); |
| EXPECT_EQ((*entry->mfgSeverity)[0].severity, 0x00); |
| |
| EXPECT_EQ(*(entry->actionFlags), 0xA800); |
| EXPECT_EQ(*(entry->mfgActionFlags), 0x4000); |
| EXPECT_EQ(entry->componentID, 0x2300); |
| EXPECT_FALSE(entry->eventType); |
| EXPECT_FALSE(entry->eventScope); |
| |
| EXPECT_EQ(entry->src.type, 0xBD); |
| EXPECT_EQ(entry->src.reasonCode, 0x2333); |
| EXPECT_TRUE(entry->src.deconfigFlag); |
| EXPECT_TRUE(entry->src.checkstopFlag); |
| |
| auto& hexwords = entry->src.hexwordADFields; |
| EXPECT_TRUE(hexwords); |
| EXPECT_EQ((*hexwords).size(), 2); |
| |
| auto word = (*hexwords).find(6); |
| EXPECT_NE(word, (*hexwords).end()); |
| EXPECT_EQ(std::get<0>(word->second), "PS_NUM"); |
| |
| word = (*hexwords).find(7); |
| EXPECT_NE(word, (*hexwords).end()); |
| EXPECT_EQ(std::get<0>(word->second), "VOLTAGE"); |
| |
| auto& sid = entry->src.symptomID; |
| EXPECT_TRUE(sid); |
| EXPECT_EQ((*sid).size(), 3); |
| EXPECT_NE(std::find((*sid).begin(), (*sid).end(), 5), (*sid).end()); |
| EXPECT_NE(std::find((*sid).begin(), (*sid).end(), 6), (*sid).end()); |
| EXPECT_NE(std::find((*sid).begin(), (*sid).end(), 7), (*sid).end()); |
| |
| EXPECT_EQ(entry->doc.description, "A PGOOD Fault"); |
| EXPECT_EQ(entry->doc.message, "PS %1 had a PGOOD Fault"); |
| auto& hexwordSource = entry->doc.messageArgSources; |
| EXPECT_TRUE(hexwordSource); |
| EXPECT_EQ((*hexwordSource).size(), 1); |
| EXPECT_EQ((*hexwordSource).front(), "SRCWord6"); |
| |
| const auto& jc = entry->journalCapture; |
| ASSERT_TRUE(jc); |
| ASSERT_TRUE(std::holds_alternative<size_t>(*jc)); |
| EXPECT_EQ(std::get<size_t>(*jc), 7); |
| |
| entry = registry.lookup("0x2333", LookupType::reasonCode); |
| ASSERT_TRUE(entry); |
| EXPECT_EQ(entry->name, "xyz.openbmc_project.Power.OverVoltage"); |
| } |
| |
| // Check the entry that mostly uses defaults |
| TEST_F(RegistryTest, TestFindEntryMinimal) |
| { |
| auto path = RegistryTest::writeData(registryData); |
| Registry registry{path}; |
| |
| auto entry = registry.lookup("xyz.openbmc_project.Power.Fault", |
| LookupType::name); |
| ASSERT_TRUE(entry); |
| EXPECT_EQ(entry->name, "xyz.openbmc_project.Power.Fault"); |
| EXPECT_EQ(entry->subsystem, 0x61); |
| EXPECT_FALSE(entry->severity); |
| EXPECT_FALSE(entry->mfgSeverity); |
| EXPECT_FALSE(entry->mfgActionFlags); |
| EXPECT_FALSE(entry->actionFlags); |
| EXPECT_EQ(entry->componentID, 0x2000); |
| EXPECT_FALSE(entry->eventType); |
| EXPECT_FALSE(entry->eventScope); |
| |
| EXPECT_EQ(entry->src.reasonCode, 0x2030); |
| EXPECT_EQ(entry->src.type, 0xBD); |
| EXPECT_FALSE(entry->src.hexwordADFields); |
| EXPECT_FALSE(entry->src.symptomID); |
| EXPECT_FALSE(entry->src.deconfigFlag); |
| EXPECT_FALSE(entry->src.checkstopFlag); |
| } |
| |
| TEST_F(RegistryTest, TestBadJSON) |
| { |
| auto path = RegistryTest::writeData("bad {} json"); |
| |
| Registry registry{path}; |
| |
| EXPECT_FALSE(registry.lookup("foo", LookupType::name)); |
| } |
| |
| // Test the helper functions the use the pel_values data. |
| TEST_F(RegistryTest, TestHelperFunctions) |
| { |
| using namespace openpower::pels::message::helper; |
| EXPECT_EQ(getSubsystem("input_power_source"), 0xA1); |
| EXPECT_THROW(getSubsystem("foo"), std::runtime_error); |
| |
| EXPECT_EQ(getSeverity("symptom_recovered"), 0x71); |
| EXPECT_THROW(getSeverity("foo"), std::runtime_error); |
| |
| EXPECT_EQ(getEventType("dump_notification"), 0x08); |
| EXPECT_THROW(getEventType("foo"), std::runtime_error); |
| |
| EXPECT_EQ(getEventScope("possibly_multiple_platforms"), 0x04); |
| EXPECT_THROW(getEventScope("foo"), std::runtime_error); |
| |
| std::vector<std::string> flags{"service_action", "dont_report", |
| "termination"}; |
| EXPECT_EQ(getActionFlags(flags), 0x9100); |
| |
| flags.clear(); |
| flags.push_back("foo"); |
| EXPECT_THROW(getActionFlags(flags), std::runtime_error); |
| } |
| |
| TEST_F(RegistryTest, TestGetSRCReasonCode) |
| { |
| using namespace openpower::pels::message::helper; |
| EXPECT_EQ(getSRCReasonCode(R"({"ReasonCode": "0x5555"})"_json, "foo"), |
| 0x5555); |
| |
| EXPECT_THROW(getSRCReasonCode(R"({"ReasonCode": "ZZZZ"})"_json, "foo"), |
| std::runtime_error); |
| } |
| |
| TEST_F(RegistryTest, TestGetSRCType) |
| { |
| using namespace openpower::pels::message::helper; |
| EXPECT_EQ(getSRCType(R"({"Type": "11"})"_json, "foo"), 0x11); |
| EXPECT_EQ(getSRCType(R"({"Type": "BF"})"_json, "foo"), 0xBF); |
| |
| EXPECT_THROW(getSRCType(R"({"Type": "1"})"_json, "foo"), |
| std::runtime_error); |
| |
| EXPECT_THROW(getSRCType(R"({"Type": "111"})"_json, "foo"), |
| std::runtime_error); |
| } |
| |
| TEST_F(RegistryTest, TestGetSRCHexwordFields) |
| { |
| using namespace openpower::pels::message::helper; |
| const auto hexwords = R"( |
| {"Words6To9": |
| { |
| "8": |
| { |
| "Description": "TEST", |
| "AdditionalDataPropSource": "TEST" |
| } |
| } |
| })"_json; |
| |
| auto fields = getSRCHexwordFields(hexwords, "foo"); |
| EXPECT_TRUE(fields); |
| auto word = fields->find(8); |
| EXPECT_NE(word, fields->end()); |
| |
| const auto theInvalidRWord = R"( |
| {"Words6To9": |
| { |
| "R": |
| { |
| "Description": "TEST", |
| "AdditionalDataPropSource": "TEST" |
| } |
| } |
| })"_json; |
| |
| EXPECT_THROW(getSRCHexwordFields(theInvalidRWord, "foo"), |
| std::runtime_error); |
| } |
| |
| TEST_F(RegistryTest, TestGetSRCSymptomIDFields) |
| { |
| using namespace openpower::pels::message::helper; |
| const auto sID = R"( |
| { |
| "SymptomIDFields": ["SRCWord3", "SRCWord4", "SRCWord5"] |
| })"_json; |
| |
| auto fields = getSRCSymptomIDFields(sID, "foo"); |
| EXPECT_NE(std::find(fields->begin(), fields->end(), 3), fields->end()); |
| EXPECT_NE(std::find(fields->begin(), fields->end(), 4), fields->end()); |
| EXPECT_NE(std::find(fields->begin(), fields->end(), 5), fields->end()); |
| |
| const auto badField = R"( |
| { |
| "SymptomIDFields": ["SRCWord3", "SRCWord4", "SRCWord"] |
| })"_json; |
| |
| EXPECT_THROW(getSRCSymptomIDFields(badField, "foo"), std::runtime_error); |
| } |
| |
| TEST_F(RegistryTest, TestGetComponentID) |
| { |
| using namespace openpower::pels::message::helper; |
| |
| // Get it from the JSON |
| auto id = getComponentID(0xBD, 0x4200, R"({"ComponentID":"0x4200"})"_json, |
| "foo"); |
| EXPECT_EQ(id, 0x4200); |
| |
| // Get it from the reason code on a 0xBD SRC |
| id = getComponentID(0xBD, 0x6700, R"({})"_json, "foo"); |
| EXPECT_EQ(id, 0x6700); |
| |
| // Not present on a 0x11 SRC |
| EXPECT_THROW(getComponentID(0x11, 0x8800, R"({})"_json, "foo"), |
| std::runtime_error); |
| } |
| |
| // Test when callouts are in the JSON. |
| TEST_F(RegistryTest, TestGetCallouts) |
| { |
| std::vector<std::string> names; |
| |
| { |
| // Callouts without AD, that depend on system type, |
| // where there is a default entry without a system type. |
| auto json = R"( |
| [ |
| { |
| "System": "system1", |
| "CalloutList": |
| [ |
| { |
| "Priority": "high", |
| "LocCode": "P1-C1" |
| }, |
| { |
| "Priority": "low", |
| "LocCode": "P1" |
| }, |
| { |
| "Priority": "low", |
| "SymbolicFRU": "service_docs" |
| }, |
| { |
| "Priority": "low", |
| "SymbolicFRUTrusted": "air_mover", |
| "UseInventoryLocCode": true |
| } |
| ] |
| }, |
| { |
| "CalloutList": |
| [ |
| { |
| "Priority": "medium", |
| "Procedure": "BMC0001" |
| }, |
| { |
| "Priority": "low", |
| "LocCode": "P3-C8", |
| "SymbolicFRUTrusted": "service_docs" |
| } |
| ] |
| |
| } |
| ])"_json; |
| |
| AdditionalData ad; |
| names.push_back("system1"); |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 4); |
| EXPECT_EQ(callouts[0].priority, "high"); |
| EXPECT_EQ(callouts[0].locCode, "P1-C1"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[1].priority, "low"); |
| EXPECT_EQ(callouts[1].locCode, "P1"); |
| EXPECT_EQ(callouts[1].procedure, ""); |
| EXPECT_EQ(callouts[1].symbolicFRU, ""); |
| EXPECT_EQ(callouts[1].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[2].priority, "low"); |
| EXPECT_EQ(callouts[2].locCode, ""); |
| EXPECT_EQ(callouts[2].procedure, ""); |
| EXPECT_EQ(callouts[2].symbolicFRU, "service_docs"); |
| EXPECT_EQ(callouts[2].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[3].priority, "low"); |
| EXPECT_EQ(callouts[3].locCode, ""); |
| EXPECT_EQ(callouts[3].procedure, ""); |
| EXPECT_EQ(callouts[3].symbolicFRU, ""); |
| EXPECT_EQ(callouts[3].symbolicFRUTrusted, "air_mover"); |
| EXPECT_EQ(callouts[3].useInventoryLocCode, true); |
| |
| // system2 isn't in the JSON, so it will pick the default one |
| names[0] = "system2"; |
| callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 2); |
| EXPECT_EQ(callouts[0].priority, "medium"); |
| EXPECT_EQ(callouts[0].locCode, ""); |
| EXPECT_EQ(callouts[0].procedure, "BMC0001"); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[1].priority, "low"); |
| EXPECT_EQ(callouts[1].locCode, "P3-C8"); |
| EXPECT_EQ(callouts[1].procedure, ""); |
| EXPECT_EQ(callouts[1].symbolicFRU, ""); |
| EXPECT_EQ(callouts[1].symbolicFRUTrusted, "service_docs"); |
| EXPECT_EQ(callouts[1].useInventoryLocCode, false); |
| } |
| |
| // Empty JSON array (treated as an error) |
| { |
| auto json = R"([])"_json; |
| AdditionalData ad; |
| names[0] = "system1"; |
| EXPECT_THROW(Registry::getCallouts(json, names, ad), |
| std::runtime_error); |
| } |
| |
| { |
| // Callouts without AD, that depend on system type, |
| // where there isn't a default entry without a system type. |
| auto json = R"( |
| [ |
| { |
| "System": "system1", |
| "CalloutList": |
| [ |
| { |
| "Priority": "high", |
| "LocCode": "P1-C1" |
| }, |
| { |
| "Priority": "low", |
| "LocCode": "P1", |
| "SymbolicFRU": "1234567" |
| } |
| ] |
| }, |
| { |
| "System": "system2", |
| "CalloutList": |
| [ |
| { |
| "Priority": "medium", |
| "LocCode": "P7", |
| "CalloutType": "tool_fru" |
| } |
| ] |
| |
| } |
| ])"_json; |
| |
| AdditionalData ad; |
| names[0] = "system1"; |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 2); |
| EXPECT_EQ(callouts[0].priority, "high"); |
| EXPECT_EQ(callouts[0].locCode, "P1-C1"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[1].priority, "low"); |
| EXPECT_EQ(callouts[1].locCode, "P1"); |
| EXPECT_EQ(callouts[1].procedure, ""); |
| EXPECT_EQ(callouts[1].symbolicFRU, "1234567"); |
| EXPECT_EQ(callouts[1].symbolicFRUTrusted, ""); |
| |
| names[0] = "system2"; |
| callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 1); |
| EXPECT_EQ(callouts[0].priority, "medium"); |
| EXPECT_EQ(callouts[0].locCode, "P7"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| |
| // There is no entry for system3 or a default system, |
| // so this should fail. |
| names[0] = "system3"; |
| EXPECT_THROW(Registry::getCallouts(json, names, ad), |
| std::runtime_error); |
| } |
| |
| { |
| // Callouts that use the AdditionalData key PROC_NUM |
| // as an index into them, along with a system type. |
| // It supports PROC_NUMs 0 and 1. |
| auto json = R"( |
| { |
| "ADName": "PROC_NUM", |
| "CalloutsWithTheirADValues": |
| [ |
| { |
| "ADValue": "0", |
| "Callouts": |
| [ |
| { |
| "System": "system3", |
| "CalloutList": |
| [ |
| { |
| "Priority": "high", |
| "LocCode": "P1-C5" |
| }, |
| { |
| "Priority": "medium", |
| "LocCode": "P1-C6", |
| "SymbolicFRU": "1234567" |
| }, |
| { |
| "Priority": "low", |
| "Procedure": "BMC0001", |
| "CalloutType": "config_procedure" |
| } |
| ] |
| }, |
| { |
| "CalloutList": |
| [ |
| { |
| "Priority": "low", |
| "LocCode": "P55" |
| } |
| ] |
| } |
| ] |
| }, |
| { |
| "ADValue": "1", |
| "Callouts": |
| [ |
| { |
| "CalloutList": |
| [ |
| { |
| "Priority": "high", |
| "LocCode": "P1-C6", |
| "CalloutType": "external_fru" |
| } |
| ] |
| } |
| ] |
| } |
| ] |
| })"_json; |
| |
| { |
| // Find callouts for PROC_NUM 0 on system3 |
| std::vector<std::string> adData{"PROC_NUM=0"}; |
| AdditionalData ad{adData}; |
| names[0] = "system3"; |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 3); |
| EXPECT_EQ(callouts[0].priority, "high"); |
| EXPECT_EQ(callouts[0].locCode, "P1-C5"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[1].priority, "medium"); |
| EXPECT_EQ(callouts[1].locCode, "P1-C6"); |
| EXPECT_EQ(callouts[1].procedure, ""); |
| EXPECT_EQ(callouts[1].symbolicFRU, "1234567"); |
| EXPECT_EQ(callouts[1].symbolicFRUTrusted, ""); |
| EXPECT_EQ(callouts[2].priority, "low"); |
| EXPECT_EQ(callouts[2].locCode, ""); |
| EXPECT_EQ(callouts[2].procedure, "BMC0001"); |
| EXPECT_EQ(callouts[2].symbolicFRU, ""); |
| EXPECT_EQ(callouts[2].symbolicFRUTrusted, ""); |
| |
| // Find callouts for PROC_NUM 0 that uses the default system entry. |
| names[0] = "system99"; |
| |
| callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 1); |
| EXPECT_EQ(callouts[0].priority, "low"); |
| EXPECT_EQ(callouts[0].locCode, "P55"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| } |
| { |
| // Find callouts for PROC_NUM 1 that uses a default system entry. |
| std::vector<std::string> adData{"PROC_NUM=1"}; |
| AdditionalData ad{adData}; |
| names[0] = "system1"; |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 1); |
| EXPECT_EQ(callouts[0].priority, "high"); |
| EXPECT_EQ(callouts[0].locCode, "P1-C6"); |
| EXPECT_EQ(callouts[0].procedure, ""); |
| EXPECT_EQ(callouts[0].symbolicFRU, ""); |
| EXPECT_EQ(callouts[0].symbolicFRUTrusted, ""); |
| } |
| { |
| // There is no entry for PROC_NUM 2, so no callouts |
| std::vector<std::string> adData{"PROC_NUM=2"}; |
| AdditionalData ad{adData}; |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_TRUE(callouts.empty()); |
| } |
| } |
| |
| { |
| // Callouts with a 'CalloutsWhenNoADMatch' section that will |
| // be used when the AdditionalData value doesn't match. |
| auto json = R"( |
| { |
| "ADName": "PROC_NUM", |
| "CalloutsWithTheirADValues": |
| [ |
| { |
| "ADValue": "0", |
| "Callouts": |
| [ |
| { |
| "CalloutList": |
| [ |
| { |
| "Priority": "high", |
| "LocCode": "P0-C0" |
| } |
| ] |
| } |
| ] |
| } |
| ], |
| "CalloutsWhenNoADMatch": [ |
| { |
| "CalloutList": [ |
| { |
| "Priority": "medium", |
| "LocCode": "P1-C1" |
| } |
| ] |
| } |
| ] |
| })"_json; |
| |
| // There isn't an entry in the JSON for a PROC_NUM of 8 |
| // so it should choose the P1-C1 callout. |
| std::vector<std::string> adData{"PROC_NUM=8"}; |
| AdditionalData ad{adData}; |
| names.clear(); |
| |
| auto callouts = Registry::getCallouts(json, names, ad); |
| EXPECT_EQ(callouts.size(), 1); |
| EXPECT_EQ(callouts[0].priority, "medium"); |
| EXPECT_EQ(callouts[0].locCode, "P1-C1"); |
| } |
| } |
| |
| TEST_F(RegistryTest, TestNoSubsystem) |
| { |
| auto path = RegistryTest::writeData(registryData); |
| Registry registry{path}; |
| |
| auto entry = registry.lookup("xyz.openbmc_project.Common.Error.Timeout", |
| LookupType::name); |
| ASSERT_TRUE(entry); |
| EXPECT_FALSE(entry->subsystem); |
| } |
| |
| TEST_F(RegistryTest, TestJournalSectionCapture) |
| { |
| auto path = RegistryTest::writeData(registryData); |
| Registry registry{path}; |
| |
| auto entry = registry.lookup("xyz.openbmc_project.Journal.Capture", |
| LookupType::name); |
| ASSERT_TRUE(entry); |
| |
| const auto& jc = entry->journalCapture; |
| ASSERT_TRUE(jc); |
| ASSERT_TRUE(std::holds_alternative<AppCaptureList>(*jc)); |
| const auto& acl = std::get<AppCaptureList>(*jc); |
| |
| ASSERT_EQ(acl.size(), 2); |
| |
| EXPECT_EQ(acl[0].syslogID, "test1"); |
| EXPECT_EQ(acl[0].numLines, 5); |
| |
| EXPECT_EQ(acl[1].syslogID, "test2"); |
| EXPECT_EQ(acl[1].numLines, 6); |
| } |