| /** |
| * Copyright © 2019 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include "extensions/openpower-pels/manager.hpp" |
| #include "log_manager.hpp" |
| #include "mocks.hpp" |
| #include "pel_utils.hpp" |
| |
| #include <sdbusplus/test/sdbus_mock.hpp> |
| #include <xyz/openbmc_project/Common/error.hpp> |
| |
| #include <fstream> |
| #include <regex> |
| |
| #include <gtest/gtest.h> |
| |
| using namespace openpower::pels; |
| namespace fs = std::filesystem; |
| |
| using ::testing::NiceMock; |
| using ::testing::Return; |
| using json = nlohmann::json; |
| |
| class TestLogger |
| { |
| public: |
| void log(const std::string& name, phosphor::logging::Entry::Level level, |
| const EventLogger::ADMap& additionalData) |
| { |
| errName = name; |
| errLevel = level; |
| ad = additionalData; |
| } |
| |
| std::string errName; |
| phosphor::logging::Entry::Level errLevel; |
| EventLogger::ADMap ad; |
| }; |
| |
| class ManagerTest : public CleanPELFiles |
| { |
| public: |
| ManagerTest() : |
| bus(sdbusplus::get_mocked_new(&sdbusInterface)), |
| logManager(bus, "logging_path") |
| { |
| sd_event_default(&sdEvent); |
| } |
| |
| fs::path makeTempDir() |
| { |
| char path[] = "/tmp/tempnameXXXXXX"; |
| std::filesystem::path dir = mkdtemp(path); |
| dirsToRemove.push_back(dir); |
| return dir; |
| } |
| |
| ~ManagerTest() |
| { |
| for (const auto& d : dirsToRemove) |
| { |
| std::filesystem::remove_all(d); |
| } |
| sd_event_unref(sdEvent); |
| } |
| |
| NiceMock<sdbusplus::SdBusMock> sdbusInterface; |
| sdbusplus::bus_t bus; |
| phosphor::logging::internal::Manager logManager; |
| sd_event* sdEvent; |
| TestLogger logger; |
| std::vector<std::filesystem::path> dirsToRemove; |
| }; |
| |
| std::optional<fs::path> findAnyPELInRepo() |
| { |
| // PELs are named <timestamp>_<ID> |
| std::regex expr{"\\d+_\\d+"}; |
| |
| for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs")) |
| { |
| if (std::regex_search(f.path().string(), expr)) |
| { |
| return f.path(); |
| } |
| } |
| return std::nullopt; |
| } |
| |
| size_t countPELsInRepo() |
| { |
| size_t count = 0; |
| std::regex expr{"\\d+_\\d+"}; |
| |
| for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs")) |
| { |
| if (std::regex_search(f.path().string(), expr)) |
| { |
| count++; |
| } |
| } |
| return count; |
| } |
| |
| void deletePELFile(uint32_t id) |
| { |
| char search[20]; |
| |
| sprintf(search, "\\d+_%.8X", id); |
| std::regex expr{search}; |
| |
| for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs")) |
| { |
| if (std::regex_search(f.path().string(), expr)) |
| { |
| fs::remove(f.path()); |
| break; |
| } |
| } |
| } |
| |
| // Test that using the RAWPEL=<file> with the Manager::create() call gets |
| // a PEL saved in the repository. |
| TEST_F(ManagerTest, TestCreateWithPEL) |
| { |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| // Create a PEL, write it to a file, and pass that filename into |
| // the create function. |
| auto data = pelDataFactory(TestPELType::pelSimple); |
| |
| fs::path pelFilename = makeTempDir() / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Find the file in the PEL repository directory |
| auto pelPathInRepo = findAnyPELInRepo(); |
| |
| EXPECT_TRUE(pelPathInRepo); |
| |
| // Now remove it based on its OpenBMC event log ID |
| manager.erase(42); |
| |
| pelPathInRepo = findAnyPELInRepo(); |
| |
| EXPECT_FALSE(pelPathInRepo); |
| } |
| |
| TEST_F(ManagerTest, TestCreateWithInvalidPEL) |
| { |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| // Create a PEL, write it to a file, and pass that filename into |
| // the create function. |
| auto data = pelDataFactory(TestPELType::pelSimple); |
| |
| // Truncate it to make it invalid. |
| data.resize(200); |
| |
| fs::path pelFilename = makeTempDir() / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Run the event loop to log the bad PEL event |
| sdeventplus::Event e{sdEvent}; |
| e.run(std::chrono::milliseconds(1)); |
| |
| PEL invalidPEL{data}; |
| EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.BadHostPEL"); |
| EXPECT_EQ(logger.errLevel, phosphor::logging::Entry::Level::Error); |
| EXPECT_EQ(std::stoi(logger.ad["PLID"], nullptr, 16), invalidPEL.plid()); |
| EXPECT_EQ(logger.ad["OBMC_LOG_ID"], "42"); |
| EXPECT_EQ(logger.ad["SRC"], (*invalidPEL.primarySRC())->asciiString()); |
| EXPECT_EQ(logger.ad["PEL_SIZE"], std::to_string(data.size())); |
| |
| // Check that the bad PEL data was saved to a file. |
| auto badPELData = readPELFile(getPELRepoPath() / "badPEL"); |
| EXPECT_EQ(*badPELData, data); |
| } |
| |
| // Test that the message registry can be used to build a PEL. |
| TEST_F(ManagerTest, TestCreateWithMessageRegistry) |
| { |
| const auto registry = R"( |
| { |
| "PELs": |
| [ |
| { |
| "Name": "xyz.openbmc_project.Error.Test", |
| "Subsystem": "power_supply", |
| "ActionFlags": ["service_action", "report"], |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Callouts": [ |
| { |
| "CalloutList": [ |
| {"Priority": "high", "Procedure": "BMC0001"}, |
| {"Priority": "medium", "SymbolicFRU": "service_docs"} |
| ] |
| } |
| ], |
| "Documentation": |
| { |
| "Description": "A PGOOD Fault", |
| "Message": "PS had a PGOOD Fault" |
| } |
| }, |
| { |
| "Name": "xyz.openbmc_project.Logging.Error.Default", |
| "Subsystem": "bmc_firmware", |
| "SRC": |
| { |
| "ReasonCode": "0x2031" |
| }, |
| "Documentation": |
| { |
| "Description": "The entry used when no match found", |
| "Message": "This is a generic SRC" |
| } |
| } |
| ] |
| } |
| )"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| std::map<std::string, std::string> additionalData{{"FOO", "BAR"}}; |
| std::vector<std::string> associations; |
| |
| // Create the event log to create the PEL from. |
| manager.create("xyz.openbmc_project.Error.Test", 33, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Ensure a PEL was created in the repository |
| auto pelFile = findAnyPELInRepo(); |
| ASSERT_TRUE(pelFile); |
| |
| auto data = readPELFile(*pelFile); |
| PEL pel(*data); |
| |
| // Spot check it. Other testcases cover the details. |
| EXPECT_TRUE(pel.valid()); |
| EXPECT_EQ(pel.obmcLogID(), 33); |
| EXPECT_EQ(pel.primarySRC().value()->asciiString(), |
| "BD612030 "); |
| // Check if the eventId creation is good |
| EXPECT_EQ(manager.getEventId(pel), |
| "BD612030 00000055 00000010 00000000 00000000 00000000 00000000 " |
| "00000000 00000000"); |
| // Check if resolution property creation is good |
| EXPECT_EQ(manager.getResolution(pel), |
| "1. Priority: High, Procedure: BMC0001\n2. Priority: Medium, PN: " |
| "SVCDOCS\n"); |
| |
| // Remove it |
| manager.erase(33); |
| pelFile = findAnyPELInRepo(); |
| EXPECT_FALSE(pelFile); |
| |
| // Create an event log that can't be found in the registry. |
| // In this case, xyz.openbmc_project.Logging.Error.Default will |
| // be used as the key instead to find a registry match. |
| manager.create("xyz.openbmc_project.Error.Foo", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Ensure a PEL was still created in the repository |
| pelFile = findAnyPELInRepo(); |
| ASSERT_TRUE(pelFile); |
| |
| data = readPELFile(*pelFile); |
| PEL newPEL(*data); |
| |
| EXPECT_TRUE(newPEL.valid()); |
| EXPECT_EQ(newPEL.obmcLogID(), 42); |
| EXPECT_EQ(newPEL.primarySRC().value()->asciiString(), |
| "BD8D2031 "); |
| |
| // Check for both the original AdditionalData item as well as |
| // the ERROR_NAME item that should contain the error message |
| // property that wasn't found. |
| std::string errorName; |
| std::string adItem; |
| |
| for (const auto& section : newPEL.optionalSections()) |
| { |
| if (SectionID::userData == static_cast<SectionID>(section->header().id)) |
| { |
| if (UserDataFormat::json == |
| static_cast<UserDataFormat>(section->header().subType)) |
| { |
| auto ud = static_cast<UserData*>(section.get()); |
| |
| // Check that there was a UserData section added that |
| // contains debug details about the device. |
| const auto& d = ud->data(); |
| std::string jsonString{d.begin(), d.end()}; |
| auto json = nlohmann::json::parse(jsonString); |
| |
| if (json.contains("ERROR_NAME")) |
| { |
| errorName = json["ERROR_NAME"].get<std::string>(); |
| } |
| |
| if (json.contains("FOO")) |
| { |
| adItem = json["FOO"].get<std::string>(); |
| } |
| } |
| } |
| if (!errorName.empty()) |
| { |
| break; |
| } |
| } |
| |
| EXPECT_EQ(errorName, "xyz.openbmc_project.Error.Foo"); |
| EXPECT_EQ(adItem, "BAR"); |
| } |
| |
| TEST_F(ManagerTest, TestDBusMethods) |
| { |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| // Create a PEL, write it to a file, and pass that filename into |
| // the create function so there's one in the repo. |
| auto data = pelDataFactory(TestPELType::pelSimple); |
| |
| fs::path pelFilename = makeTempDir() / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // getPELFromOBMCID |
| auto newData = manager.getPELFromOBMCID(42); |
| EXPECT_EQ(newData.size(), data.size()); |
| |
| // Read the PEL to get the ID for later |
| PEL pel{newData}; |
| auto id = pel.id(); |
| |
| EXPECT_THROW( |
| manager.getPELFromOBMCID(id + 1), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // getPEL |
| auto unixfd = manager.getPEL(id); |
| |
| // Get the size |
| struct stat s; |
| int r = fstat(unixfd, &s); |
| ASSERT_EQ(r, 0); |
| auto size = s.st_size; |
| |
| // Open the FD and check the contents |
| FILE* fp = fdopen(unixfd, "r"); |
| ASSERT_NE(fp, nullptr); |
| |
| std::vector<uint8_t> fdData; |
| fdData.resize(size); |
| r = fread(fdData.data(), 1, size, fp); |
| EXPECT_EQ(r, size); |
| |
| EXPECT_EQ(newData, fdData); |
| |
| fclose(fp); |
| |
| // Run the event loop to close the FD |
| sdeventplus::Event e{sdEvent}; |
| e.run(std::chrono::milliseconds(1)); |
| |
| EXPECT_THROW( |
| manager.getPEL(id + 1), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // hostAck |
| manager.hostAck(id); |
| |
| EXPECT_THROW( |
| manager.hostAck(id + 1), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // hostReject |
| manager.hostReject(id, Manager::RejectionReason::BadPEL); |
| |
| // Run the event loop to log the bad PEL event |
| e.run(std::chrono::milliseconds(1)); |
| |
| EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.SentBadPELToHost"); |
| EXPECT_EQ(id, std::stoi(logger.ad["BAD_ID"], nullptr, 16)); |
| |
| manager.hostReject(id, Manager::RejectionReason::HostFull); |
| |
| EXPECT_THROW( |
| manager.hostReject(id + 1, Manager::RejectionReason::BadPEL), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // GetPELIdFromBMCLogId |
| EXPECT_EQ(pel.id(), manager.getPELIdFromBMCLogId(pel.obmcLogID())); |
| EXPECT_THROW( |
| manager.getPELIdFromBMCLogId(pel.obmcLogID() + 1), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // GetBMCLogIdFromPELId |
| EXPECT_EQ(pel.obmcLogID(), manager.getBMCLogIdFromPELId(pel.id())); |
| EXPECT_THROW( |
| manager.getBMCLogIdFromPELId(pel.id() + 1), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| } |
| |
| // An ESEL from the wild |
| const std::string esel{ |
| "00 00 df 00 00 00 00 20 00 04 12 01 6f aa 00 00 " |
| "50 48 00 30 01 00 33 00 20 23 05 11 10 20 20 00 00 00 00 07 5c d5 50 db " |
| "42 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 4e 90 00 00 4e " |
| "55 48 00 18 01 00 09 00 8a 03 40 00 00 00 00 00 ff ff 00 00 00 00 00 00 " |
| "50 53 00 50 01 01 00 00 02 00 00 09 33 2d 00 48 00 00 00 e0 00 00 10 00 " |
| "00 00 00 00 00 20 00 00 00 0c 00 02 00 00 00 fa 00 00 0c e4 00 00 00 12 " |
| "42 43 38 41 33 33 32 44 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 " |
| "20 20 20 20 20 20 20 20 55 44 00 1c 01 06 01 00 02 54 41 4b 00 00 00 06 " |
| "00 00 00 55 00 01 f9 20 00 00 00 00 55 44 00 24 01 06 01 00 01 54 41 4b " |
| "00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 23 01 00 02 00 05 00 00 " |
| "55 44 00 0c 01 0b 01 00 0f 01 00 00 55 44 00 10 01 04 01 00 0f 9f de 6a " |
| "00 01 00 00 55 44 00 7c 00 0c 01 00 00 13 0c 02 00 fa 0c e4 16 00 01 2c " |
| "0c 1c 16 00 00 fa 0a f0 14 00 00 fa 0b b8 14 00 00 be 09 60 12 00 01 2c " |
| "0d 7a 12 00 00 fa 0c 4e 10 00 00 fa 0c e4 10 00 00 be 0a 8c 16 00 01 2c " |
| "0c 1c 16 00 01 09 09 f6 16 00 00 fa 09 f6 14 00 00 fa 0b b8 14 00 00 fa " |
| "0a f0 14 00 00 be 08 ca 12 00 01 2c 0c e4 12 00 00 fa 0b 54 10 00 00 fa " |
| "0c 2d 10 00 00 be 08 ca 55 44 00 58 01 03 01 00 00 00 00 00 00 05 31 64 " |
| "00 00 00 00 00 05 0d d4 00 00 00 00 40 5f 06 e0 00 00 00 00 40 5d d2 00 " |
| "00 00 00 00 40 57 d3 d0 00 00 00 00 40 58 f6 a0 00 00 00 00 40 54 c9 34 " |
| "00 00 00 00 40 55 9a 10 00 00 00 00 40 4c 0a 80 00 00 00 00 00 00 27 14 " |
| "55 44 01 84 01 01 01 00 48 6f 73 74 62 6f 6f 74 20 42 75 69 6c 64 20 49 " |
| "44 3a 20 68 6f 73 74 62 6f 6f 74 2d 66 65 63 37 34 64 66 2d 70 30 61 38 " |
| "37 64 63 34 2f 68 62 69 63 6f 72 65 2e 62 69 6e 00 49 42 4d 2d 77 69 74 " |
| "68 65 72 73 70 6f 6f 6e 2d 4f 50 39 2d 76 32 2e 34 2d 39 2e 32 33 34 0a " |
| "09 6f 70 2d 62 75 69 6c 64 2d 38 32 66 34 63 66 30 0a 09 62 75 69 6c 64 " |
| "72 6f 6f 74 2d 32 30 31 39 2e 30 35 2e 32 2d 31 30 2d 67 38 39 35 39 31 " |
| "31 34 0a 09 73 6b 69 62 6f 6f 74 2d 76 36 2e 35 2d 31 38 2d 67 34 37 30 " |
| "66 66 62 35 66 32 39 64 37 0a 09 68 6f 73 74 62 6f 6f 74 2d 66 65 63 37 " |
| "34 64 66 2d 70 30 61 38 37 64 63 34 0a 09 6f 63 63 2d 65 34 35 39 37 61 " |
| "62 0a 09 6c 69 6e 75 78 2d 35 2e 32 2e 31 37 2d 6f 70 65 6e 70 6f 77 65 " |
| "72 31 2d 70 64 64 63 63 30 33 33 0a 09 70 65 74 69 74 62 6f 6f 74 2d 76 " |
| "31 2e 31 30 2e 34 0a 09 6d 61 63 68 69 6e 65 2d 78 6d 6c 2d 63 36 32 32 " |
| "63 62 35 2d 70 37 65 63 61 62 33 64 0a 09 68 6f 73 74 62 6f 6f 74 2d 62 " |
| "69 6e 61 72 69 65 73 2d 36 36 65 39 61 36 30 0a 09 63 61 70 70 2d 75 63 " |
| "6f 64 65 2d 70 39 2d 64 64 32 2d 76 34 0a 09 73 62 65 2d 36 30 33 33 30 " |
| "65 30 0a 09 68 63 6f 64 65 2d 68 77 30 39 32 31 31 39 61 2e 6f 70 6d 73 " |
| "74 0a 00 00 55 44 00 70 01 04 01 00 0f 9f de 6a 00 05 00 00 07 5f 1d f4 " |
| "30 32 43 59 34 37 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " |
| "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " |
| "0b ac 54 02 59 41 31 39 33 34 36 39 37 30 35 38 00 00 00 00 00 00 05 22 " |
| "a1 58 01 8a 00 58 40 20 17 18 4d 2c 00 00 00 fc 01 a1 00 00 55 44 00 14 " |
| "01 08 01 00 00 00 00 01 00 00 00 5a 00 00 00 05 55 44 03 fc 01 15 31 00 " |
| "01 28 00 42 46 41 50 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 f4 " |
| "00 00 00 00 00 00 03 f4 00 00 00 0b 00 00 00 00 00 00 00 3d 2c 9b c2 84 " |
| "00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 09 " |
| "00 00 00 00 00 11 bd 20 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 " |
| "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 00 00 00 00 00 01 2c " |
| "00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c 1c 00 00 00 64 00 00 00 3d " |
| "2c 9b d1 11 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 " |
| "00 00 00 0a 00 00 00 00 00 13 b5 a0 00 00 00 00 00 01 f8 80 00 00 00 00 " |
| "00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 " |
| "00 00 00 be 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0a 8c 00 00 00 64 " |
| "00 00 00 3d 2c 9b df 98 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 " |
| "00 00 00 00 00 00 00 0b 00 00 00 00 00 15 ae 20 00 00 00 00 00 01 f8 80 " |
| "00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 " |
| "00 00 00 00 00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c e4 " |
| "00 00 00 64 00 00 00 3d 2c 9b ea b7 00 00 01 e4 00 48 43 4f fb ed 70 b1 " |
| "00 00 02 01 00 00 00 00 00 00 00 0c 00 00 00 00 00 17 a6 a0 00 00 00 00 " |
| "00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 " |
| "00 00 00 12 00 00 00 00 00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 " |
| "00 00 0c 4e 00 00 00 64 00 00 00 3d 2c 9b f6 27 00 00 01 e4 00 48 43 4f " |
| "fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0d 00 00 00 00 00 19 9f 20 " |
| "00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 " |
| "00 00 00 00 00 00 00 12 00 00 00 00 00 00 01 2c 00 00 00 00 00 00 07 d0 " |
| "00 00 00 00 00 00 0d 7a 00 00 00 64 00 00 00 3d 2c 9c 05 75 00 00 01 e4 " |
| "00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0e 00 00 00 00 " |
| "00 1b 97 a0 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 " |
| "00 00 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 be 00 00 00 00 " |
| "00 00 07 d0 00 00 00 00 00 00 09 60 00 00 00 64 00 00 00 3d 2c 9c 11 29 " |
| "00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0f " |
| "00 00 00 00 00 1d 90 20 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 " |
| "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 fa " |
| "00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0b b8 00 00 00 64 00 00 00 3d " |
| "2c 9c 1c 45 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 " |
| "00 00 00 10 00 00 00 00 00 1f 88 a0 00 00 00 00 00 01 f8 80 00 00 00 00 " |
| "00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 00 00 00 " |
| "00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0a f0 00 00 00 64 " |
| "00 00 00 3d 2c 9c 2b 14 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 " |
| "00 00 00 00 00 00 00 11 00 00 00 00 00 21 81 20 00 00 00 00 00 01 f8 80 " |
| "00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 " |
| "00 00 00 00 00 00 01 2c 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c 1c " |
| "00 00 00 64 00 00 00 3d 2d 6d 8f 9e 00 00 01 e4 00 00 43 4f 52 d7 9c 36 " |
| "00 00 04 73 00 00 00 1c 00 00 00 3d 2d 6d 99 ac 00 00 01 e4 00 10 43 4f " |
| "3f f2 02 3d 00 00 05 58 00 00 00 00 02 00 00 01 00 00 00 00 00 00 00 40 " |
| "00 00 00 2c 55 44 00 30 01 15 31 00 01 28 00 42 46 41 50 49 5f 44 42 47 " |
| "00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 28 00 00 00 00 " |
| "00 00 00 00 55 44 01 74 01 15 31 00 01 28 00 42 46 41 50 49 5f 49 00 00 " |
| "00 00 00 00 00 00 00 00 00 00 01 6c 00 00 00 00 00 00 01 6c 00 00 00 0b " |
| "00 00 00 00 00 00 00 3c 0d 52 18 5e 00 00 01 e4 00 08 43 4f 46 79 94 13 " |
| "00 00 0a 5b 00 00 00 00 00 00 2c 00 00 00 00 24 00 00 00 3c 0d 6b 26 6c " |
| "00 00 01 e4 00 00 43 4f 4e 9b 18 74 00 00 01 03 00 00 00 1c 00 00 00 3c " |
| "12 b9 2d 13 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 00 00 00 1c " |
| "00 00 00 3c 13 02 73 53 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 " |
| "00 00 00 1c 00 00 00 3c 13 04 7c 94 00 00 01 e4 00 00 43 4f ea 31 ed d4 " |
| "00 00 05 c4 00 00 00 1c 00 00 00 3c 13 06 ad e1 00 00 01 e4 00 00 43 4f " |
| "ea 31 ed d4 00 00 05 c4 00 00 00 1c 00 00 00 3c 13 07 3f 77 00 00 01 e4 " |
| "00 00 43 4f 5e 4a 55 32 00 00 10 f2 00 00 00 1c 00 00 00 3c 13 07 4e e4 " |
| "00 00 01 e4 00 00 43 4f 5e 4a 55 32 00 00 0d 68 00 00 00 1c 00 00 00 3c " |
| "13 36 79 18 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 00 00 00 1c " |
| "00 00 00 3d 2c 9c 36 70 00 00 01 e4 00 00 43 4f 23 45 90 97 00 00 02 47 " |
| "00 00 00 1c 00 00 00 3d 2d 6d a3 ed 00 00 01 e4 00 08 43 4f 74 3a 5b 1a " |
| "00 00 04 cc 00 00 00 00 02 00 00 01 00 00 00 24 55 44 00 30 01 15 31 00 " |
| "01 28 00 42 53 43 41 4e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 " |
| "00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 00"}; |
| |
| TEST_F(ManagerTest, TestESELToRawData) |
| { |
| auto data = Manager::eselToRawData(esel); |
| |
| EXPECT_EQ(data.size(), 2464); |
| |
| PEL pel{data}; |
| EXPECT_TRUE(pel.valid()); |
| } |
| |
| TEST_F(ManagerTest, TestCreateWithESEL) |
| { |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| { |
| std::map<std::string, std::string> additionalData{{"ESEL", esel}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 37, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| auto data = manager.getPELFromOBMCID(37); |
| PEL pel{data}; |
| EXPECT_TRUE(pel.valid()); |
| } |
| |
| // Now an invalid one |
| { |
| std::string adItem = esel; |
| |
| // Crop it |
| adItem.resize(adItem.size() - 300); |
| |
| std::map<std::string, std::string> additionalData{{"ESEL", adItem}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 38, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| EXPECT_THROW( |
| manager.getPELFromOBMCID(38), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // Run the event loop to log the bad PEL event |
| sdeventplus::Event e{sdEvent}; |
| e.run(std::chrono::milliseconds(1)); |
| |
| EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.BadHostPEL"); |
| EXPECT_EQ(logger.errLevel, phosphor::logging::Entry::Level::Error); |
| } |
| } |
| |
| // Test that PELs will be pruned when necessary |
| TEST_F(ManagerTest, TestPruning) |
| { |
| sdeventplus::Event e{sdEvent}; |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| // Create 25 1000B (4096B on disk each, which is what is used for |
| // pruning) BMC non-informational PELs in the 100KB repository. After |
| // the 24th one, the repo will be 96% full and a prune should be |
| // triggered to remove all but 7 to get under 30% full. Then when the |
| // 25th is added there will be 8 left. |
| |
| auto dir = makeTempDir(); |
| for (int i = 1; i <= 25; i++) |
| { |
| auto data = pelFactory(42, 'O', 0x40, 0x8800, 1000); |
| |
| fs::path pelFilename = dir / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Simulate the code getting back to the event loop |
| // after each create. |
| e.run(std::chrono::milliseconds(1)); |
| |
| if (i < 24) |
| { |
| EXPECT_EQ(countPELsInRepo(), i); |
| } |
| else if (i == 24) |
| { |
| // Prune occured |
| EXPECT_EQ(countPELsInRepo(), 7); |
| } |
| else // i == 25 |
| { |
| EXPECT_EQ(countPELsInRepo(), 8); |
| } |
| } |
| |
| try |
| { |
| // Make sure the 8 newest ones are still found. |
| for (uint32_t i = 0; i < 8; i++) |
| { |
| manager.getPEL(0x50000012 + i); |
| } |
| } |
| catch ( |
| const sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument& |
| ex) |
| { |
| ADD_FAILURE() << "PELs should have all been found"; |
| } |
| } |
| |
| // Test that manually deleting a PEL file will be recognized by the code. |
| TEST_F(ManagerTest, TestPELManualDelete) |
| { |
| sdeventplus::Event e{sdEvent}; |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| auto data = pelDataFactory(TestPELType::pelSimple); |
| auto dir = makeTempDir(); |
| fs::path pelFilename = dir / "rawpel"; |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| // Add 20 PELs, they will get incrementing IDs like |
| // 0x50000001, 0x50000002, etc. |
| for (int i = 1; i <= 20; i++) |
| { |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Sanity check this ID is really there so we can test |
| // it was deleted later. This will throw an exception if |
| // not present. |
| manager.getPEL(0x50000000 + i); |
| |
| // Run an event loop pass where the internal FD is deleted |
| // after the getPEL function call. |
| e.run(std::chrono::milliseconds(1)); |
| } |
| |
| EXPECT_EQ(countPELsInRepo(), 20); |
| |
| deletePELFile(0x50000001); |
| |
| // Run a single event loop pass so the inotify event can run |
| e.run(std::chrono::milliseconds(1)); |
| |
| EXPECT_EQ(countPELsInRepo(), 19); |
| |
| EXPECT_THROW( |
| manager.getPEL(0x50000001), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| |
| // Delete a few more, they should all get handled in the same |
| // event loop pass |
| std::vector<uint32_t> toDelete{0x50000002, 0x50000003, 0x50000004, |
| 0x50000005, 0x50000006}; |
| std::for_each(toDelete.begin(), toDelete.end(), |
| [](auto i) { deletePELFile(i); }); |
| |
| e.run(std::chrono::milliseconds(1)); |
| |
| EXPECT_EQ(countPELsInRepo(), 14); |
| |
| std::for_each(toDelete.begin(), toDelete.end(), [&manager](const auto i) { |
| EXPECT_THROW( |
| manager.getPEL(i), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| }); |
| } |
| |
| // Test that deleting all PELs at once is handled OK. |
| TEST_F(ManagerTest, TestPELManualDeleteAll) |
| { |
| sdeventplus::Event e{sdEvent}; |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| auto data = pelDataFactory(TestPELType::pelSimple); |
| auto dir = makeTempDir(); |
| fs::path pelFilename = dir / "rawpel"; |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| // Add 200 PELs, they will get incrementing IDs like |
| // 0x50000001, 0x50000002, etc. |
| for (int i = 1; i <= 200; i++) |
| { |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Sanity check this ID is really there so we can test |
| // it was deleted later. This will throw an exception if |
| // not present. |
| manager.getPEL(0x50000000 + i); |
| |
| // Run an event loop pass where the internal FD is deleted |
| // after the getPEL function call. |
| e.run(std::chrono::milliseconds(1)); |
| } |
| |
| // Delete them all at once |
| auto logPath = getPELRepoPath() / "logs"; |
| std::string cmd = "rm " + logPath.string() + "/*_*"; |
| |
| { |
| auto rc = system(cmd.c_str()); |
| EXPECT_EQ(rc, 0); |
| } |
| |
| EXPECT_EQ(countPELsInRepo(), 0); |
| |
| // It will take 5 event loop passes to process them all |
| for (int i = 0; i < 5; i++) |
| { |
| e.run(std::chrono::milliseconds(1)); |
| } |
| |
| for (int i = 1; i <= 200; i++) |
| { |
| EXPECT_THROW( |
| manager.getPEL(0x50000000 + i), |
| sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument); |
| } |
| } |
| |
| // Test that fault LEDs are turned on when PELs are created |
| TEST_F(ManagerTest, TestServiceIndicators) |
| { |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| MockDataInterface* mockIface = |
| reinterpret_cast<MockDataInterface*>(dataIface.get()); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| // Add a PEL with a callout as if hostboot added it |
| { |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("U42", 0, true)) |
| .WillOnce( |
| Return(std::vector<std::string>{"/system/chassis/processor"})); |
| |
| EXPECT_CALL(*mockIface, |
| setFunctional("/system/chassis/processor", false)) |
| .Times(1); |
| |
| // This hostboot PEL has a single hardware callout in it. |
| auto data = pelFactory(1, 'B', 0x20, 0xA400, 500); |
| |
| fs::path pelFilename = makeTempDir() / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| } |
| |
| // Add a BMC PEL with a callout that uses the message registry |
| { |
| std::vector<std::string> names{"systemA"}; |
| EXPECT_CALL(*mockIface, getSystemNames) |
| .Times(1) |
| .WillOnce(Return(names)); |
| |
| EXPECT_CALL(*mockIface, expandLocationCode("P42-C23", 0)) |
| .WillOnce(Return("U42-P42-C23")); |
| |
| // First call to this is when building the Callout section |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("P42-C23", 0, false)) |
| .WillOnce( |
| Return(std::vector<std::string>{"/system/chassis/processor"})); |
| |
| // Second call to this is finding the associated LED group |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("U42-P42-C23", 0, true)) |
| .WillOnce( |
| Return(std::vector<std::string>{"/system/chassis/processor"})); |
| |
| EXPECT_CALL(*mockIface, |
| setFunctional("/system/chassis/processor", false)) |
| .Times(1); |
| |
| const auto registry = R"( |
| { |
| "PELs": |
| [ |
| { |
| "Name": "xyz.openbmc_project.Error.Test", |
| "Subsystem": "power_supply", |
| "ActionFlags": ["service_action", "report"], |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Callouts": [ |
| { |
| "CalloutList": [ |
| {"Priority": "high", "LocCode": "P42-C23"} |
| ] |
| } |
| ], |
| "Documentation": |
| { |
| "Description": "Test Error", |
| "Message": "Test Error" |
| } |
| } |
| ] |
| })"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::map<std::string, std::string> additionalData; |
| std::vector<std::string> associations; |
| |
| manager.create("xyz.openbmc_project.Error.Test", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| } |
| } |
| |
| // Test for duplicate PELs moved to archive folder |
| TEST_F(ManagerTest, TestDuplicatePEL) |
| { |
| sdeventplus::Event e{sdEvent}; |
| size_t count = 0; |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| for (int i = 0; i < 2; i++) |
| { |
| // This hostboot PEL has a single hardware callout in it. |
| auto data = pelFactory(1, 'B', 0x20, 0xA400, 500); |
| |
| fs::path pelFilename = makeTempDir() / "rawpel"; |
| std::ofstream pelFile{pelFilename}; |
| pelFile.write(reinterpret_cast<const char*>(data.data()), data.size()); |
| pelFile.close(); |
| |
| std::map<std::string, std::string> additionalData{ |
| {"RAWPEL", pelFilename.string()}}; |
| std::vector<std::string> associations; |
| |
| manager.create("error message", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| e.run(std::chrono::milliseconds(1)); |
| } |
| |
| for (auto& f : |
| fs::directory_iterator(getPELRepoPath() / "logs" / "archive")) |
| { |
| if (fs::is_regular_file(f.path())) |
| { |
| count++; |
| } |
| } |
| |
| // Get count of PELs in the repository & in archive directtory |
| EXPECT_EQ(countPELsInRepo(), 1); |
| EXPECT_EQ(count, 1); |
| } |
| |
| // Test termination bit set for pel with critical system termination |
| // severity |
| TEST_F(ManagerTest, TestTerminateBitWithPELSevCriticalSysTerminate) |
| { |
| const auto registry = R"( |
| { |
| "PELs": |
| [ |
| { |
| "Name": "xyz.openbmc_project.Error.Test", |
| "Subsystem": "power_supply", |
| "Severity": "critical_system_term", |
| "ActionFlags": ["service_action", "report"], |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Documentation": |
| { |
| "Description": "A PGOOD Fault", |
| "Message": "PS had a PGOOD Fault" |
| } |
| } |
| ] |
| } |
| )"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| std::map<std::string, std::string> additionalData{{"FOO", "BAR"}}; |
| std::vector<std::string> associations; |
| |
| // Create the event log to create the PEL from. |
| manager.create("xyz.openbmc_project.Error.Test", 33, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| |
| // Ensure a PEL was created in the repository |
| auto pelData = findAnyPELInRepo(); |
| ASSERT_TRUE(pelData); |
| |
| auto getPELData = readPELFile(*pelData); |
| PEL pel(*getPELData); |
| |
| // Spot check it. Other testcases cover the details. |
| EXPECT_TRUE(pel.valid()); |
| |
| // Check for terminate bit set |
| auto& hexwords = pel.primarySRC().value()->hexwordData(); |
| EXPECT_EQ(hexwords[3] & 0x20000000, 0x20000000); |
| } |
| |
| TEST_F(ManagerTest, TestSanitizeFieldforDBus) |
| { |
| std::string base{"(test0!}\n\t ~"}; |
| auto string = base; |
| string += char{' ' - 1}; |
| string += char{'~' + 1}; |
| string += char{0}; |
| string += char{static_cast<char>(0xFF)}; |
| |
| // convert the last four chars to spaces |
| EXPECT_EQ(Manager::sanitizeFieldForDBus(string), base + " "); |
| } |
| |
| TEST_F(ManagerTest, TestFruPlug) |
| { |
| const auto registry = R"( |
| { |
| "PELs": |
| [{ |
| "Name": "xyz.openbmc_project.Fan.Error.Fault", |
| "Subsystem": "power_fans", |
| "ComponentID": "0x2800", |
| "SRC": |
| { |
| "Type": "11", |
| "ReasonCode": "0x76F0", |
| "Words6To9": {}, |
| "DeconfigFlag": true |
| }, |
| "Callouts": [{ |
| "CalloutList": [ |
| {"Priority": "low", "LocCode": "P0"}, |
| {"Priority": "high", "LocCode": "A3"} |
| ] |
| }], |
| "Documentation": { |
| "Description": "A Fan Fault", |
| "Message": "Fan had a Fault" |
| } |
| }] |
| } |
| )"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| MockDataInterface* mockIface = |
| reinterpret_cast<MockDataInterface*>(dataIface.get()); |
| |
| // Set up the mock calls used when building callouts |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("P0", 0, false)) |
| .WillRepeatedly(Return(std::vector<std::string>{"motherboard"})); |
| EXPECT_CALL(*mockIface, expandLocationCode("P0", 0)) |
| .WillRepeatedly(Return("U1234-P0")); |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("U1234-P0", 0, true)) |
| .WillRepeatedly(Return(std::vector<std::string>{"motherboard"})); |
| |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("A3", 0, false)) |
| .WillRepeatedly(Return(std::vector<std::string>{"fan"})); |
| EXPECT_CALL(*mockIface, expandLocationCode("A3", 0)) |
| .WillRepeatedly(Return("U1234-A3")); |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("U1234-A3", 0, true)) |
| .WillRepeatedly(Return(std::vector<std::string>{"fan"})); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| |
| std::map<std::string, std::string> additionalData; |
| std::vector<std::string> associations; |
| |
| auto checkDeconfigured = [](bool deconfigured) { |
| auto pelFile = findAnyPELInRepo(); |
| ASSERT_TRUE(pelFile); |
| |
| auto data = readPELFile(*pelFile); |
| PEL pel(*data); |
| ASSERT_TRUE(pel.valid()); |
| |
| EXPECT_EQ(pel.primarySRC().value()->getErrorStatusFlag( |
| SRC::ErrorStatusFlags::deconfigured), |
| deconfigured); |
| }; |
| |
| manager.create("xyz.openbmc_project.Fan.Error.Fault", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| checkDeconfigured(true); |
| |
| // Replace A3 so PEL deconfigured flag should be set to false |
| mockIface->fruPresent("U1234-A3"); |
| checkDeconfigured(false); |
| |
| manager.erase(42); |
| |
| // Create it again and replace a FRU not in the callout list. |
| // Deconfig flag should stay on. |
| manager.create("xyz.openbmc_project.Fan.Error.Fault", 43, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| checkDeconfigured(true); |
| mockIface->fruPresent("U1234-A4"); |
| checkDeconfigured(true); |
| } |
| |
| int createHWIsolatedCalloutFile() |
| { |
| json jsonCalloutDataList(nlohmann::json::value_t::array); |
| json jsonDimmCallout; |
| |
| jsonDimmCallout["LocationCode"] = "Ufcs-DIMM0"; |
| jsonDimmCallout["EntityPath"] = {35, 1, 0, 2, 0, 3, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| jsonDimmCallout["GuardType"] = "GARD_Predictive"; |
| jsonDimmCallout["Deconfigured"] = false; |
| jsonDimmCallout["Guarded"] = true; |
| jsonDimmCallout["Priority"] = "M"; |
| jsonCalloutDataList.emplace_back(std::move(jsonDimmCallout)); |
| |
| std::string calloutData(jsonCalloutDataList.dump()); |
| std::string calloutFile("/tmp/phalPELCalloutsJson.XXXXXX"); |
| int fileFD = -1; |
| |
| fileFD = mkostemp(calloutFile.data(), O_RDWR); |
| if (fileFD == -1) |
| { |
| perror("Failed to create PELCallouts file"); |
| return -1; |
| } |
| |
| ssize_t rc = write(fileFD, calloutData.c_str(), calloutData.size()); |
| if (rc == -1) |
| { |
| perror("Failed to write PELCallouts file"); |
| close(fileFD); |
| return -1; |
| } |
| |
| // Ensure we seek to the beginning of the file |
| rc = lseek(fileFD, 0, SEEK_SET); |
| if (rc == -1) |
| { |
| perror("Failed to set SEEK_SET for PELCallouts file"); |
| close(fileFD); |
| return -1; |
| } |
| return fileFD; |
| } |
| |
| void appendFFDCEntry(int fd, uint8_t subTypeJson, uint8_t version, |
| phosphor::logging::FFDCEntries& ffdcEntries) |
| { |
| phosphor::logging::FFDCEntry ffdcEntry = |
| std::make_tuple(sdbusplus::xyz::openbmc_project::Logging::server:: |
| Create::FFDCFormat::JSON, |
| subTypeJson, version, fd); |
| ffdcEntries.push_back(ffdcEntry); |
| } |
| |
| TEST_F(ManagerTest, TestPELDeleteWithoutHWIsolation) |
| { |
| const auto registry = R"( |
| { |
| "PELs": |
| [{ |
| "Name": "xyz.openbmc_project.Error.Test", |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Documentation": { |
| "Description": "Test Error", |
| "Message": "Test Error" |
| } |
| }] |
| } |
| )"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| MockDataInterface* mockIface = |
| reinterpret_cast<MockDataInterface*>(dataIface.get()); |
| |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("Ufcs-DIMM0", 0, false)) |
| .WillOnce(Return(std::vector<std::string>{ |
| "/xyz/openbmc_project/inventory/system/chassis/motherboard/dimm0"})); |
| |
| // Mock the scenario where the hardware isolation guard is flagged |
| // but is not associated, resulting in an empty list being returned. |
| EXPECT_CALL( |
| *mockIface, |
| getAssociatedPaths( |
| ::testing::StrEq( |
| "/xyz/openbmc_project/logging/entry/42/isolated_hw_entry"), |
| ::testing::StrEq("/"), 0, |
| ::testing::ElementsAre( |
| "xyz.openbmc_project.HardwareIsolation.Entry"))) |
| .WillRepeatedly(Return(std::vector<std::string>{})); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| std::map<std::string, std::string> additionalData; |
| std::vector<std::string> associations; |
| |
| // Check when there's no PEL with given id. |
| { |
| EXPECT_FALSE(manager.isDeleteProhibited(42)); |
| } |
| // creating without ffdcEntries |
| manager.create("xyz.openbmc_project.Error.Test", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations); |
| auto pelFile = findAnyPELInRepo(); |
| auto data = readPELFile(*pelFile); |
| PEL pel_unguarded(*data); |
| { |
| // Verify that the guard flag is false. |
| EXPECT_FALSE(pel_unguarded.getGuardFlag()); |
| // Check that `isDeleteProhibited` returns false when the guard flag |
| // is false. |
| EXPECT_FALSE(manager.isDeleteProhibited(42)); |
| } |
| manager.erase(42); |
| EXPECT_FALSE(findAnyPELInRepo()); |
| |
| int fd = createHWIsolatedCalloutFile(); |
| ASSERT_NE(fd, -1); |
| uint8_t subTypeJson = 0xCA; |
| uint8_t version = 0x01; |
| phosphor::logging::FFDCEntries ffdcEntries; |
| appendFFDCEntry(fd, subTypeJson, version, ffdcEntries); |
| manager.create("xyz.openbmc_project.Error.Test", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations, ffdcEntries); |
| close(fd); |
| |
| auto pelPathInRepo = findAnyPELInRepo(); |
| auto unguardedData = readPELFile(*pelPathInRepo); |
| PEL pel(*unguardedData); |
| { |
| // Verify guard flag set to true |
| EXPECT_TRUE(pel.getGuardFlag()); |
| // Check even if guard flag is true, if dbus call returns empty |
| // array list then `isDeleteProhibited` returns false |
| EXPECT_FALSE(manager.isDeleteProhibited(42)); |
| } |
| manager.erase(42); |
| } |
| |
| TEST_F(ManagerTest, TestPELDeleteWithHWIsolation) |
| { |
| const auto registry = R"( |
| { |
| "PELs": |
| [{ |
| "Name": "xyz.openbmc_project.Error.Test", |
| "Severity": "critical_system_term", |
| "SRC": |
| { |
| "ReasonCode": "0x2030" |
| }, |
| "Documentation": { |
| "Description": "Test Error", |
| "Message": "Test Error" |
| } |
| }] |
| } |
| )"; |
| |
| auto path = getPELReadOnlyDataPath(); |
| fs::create_directories(path); |
| path /= "message_registry.json"; |
| |
| std::ofstream registryFile{path}; |
| registryFile << registry; |
| registryFile.close(); |
| |
| std::unique_ptr<DataInterfaceBase> dataIface = |
| std::make_unique<MockDataInterface>(); |
| |
| MockDataInterface* mockIface = |
| reinterpret_cast<MockDataInterface*>(dataIface.get()); |
| |
| EXPECT_CALL(*mockIface, getInventoryFromLocCode("Ufcs-DIMM0", 0, false)) |
| .WillOnce(Return(std::vector<std::string>{ |
| "/xyz/openbmc_project/inventory/system/chassis/motherboard/dimm0"})); |
| |
| EXPECT_CALL( |
| *mockIface, |
| getAssociatedPaths( |
| ::testing::StrEq( |
| "/xyz/openbmc_project/logging/entry/42/isolated_hw_entry"), |
| ::testing::StrEq("/"), 0, |
| ::testing::ElementsAre( |
| "xyz.openbmc_project.HardwareIsolation.Entry"))) |
| .WillRepeatedly(Return(std::vector<std::string>{ |
| "/xyz/openbmc_project/hardware_isolation/entry/1"})); |
| |
| std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>(); |
| openpower::pels::Manager manager{ |
| logManager, std::move(dataIface), |
| std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1, |
| std::placeholders::_2, std::placeholders::_3), |
| std::move(journal)}; |
| std::map<std::string, std::string> additionalData; |
| std::vector<std::string> associations; |
| |
| int fd = createHWIsolatedCalloutFile(); |
| ASSERT_NE(fd, -1); |
| uint8_t subTypeJson = 0xCA; |
| uint8_t version = 0x01; |
| phosphor::logging::FFDCEntries ffdcEntries; |
| appendFFDCEntry(fd, subTypeJson, version, ffdcEntries); |
| manager.create("xyz.openbmc_project.Error.Test", 42, 0, |
| phosphor::logging::Entry::Level::Error, additionalData, |
| associations, ffdcEntries); |
| close(fd); |
| |
| auto pelFile = findAnyPELInRepo(); |
| EXPECT_TRUE(pelFile); |
| auto data = readPELFile(*pelFile); |
| PEL pel(*data); |
| EXPECT_TRUE(pel.valid()); |
| // Test case where the guard flag is set to true and the hardware |
| // isolation guard is associated, which should result in |
| // `isDeleteProhibited` returning true as expected. |
| EXPECT_TRUE(pel.getGuardFlag()); |
| EXPECT_TRUE(manager.isDeleteProhibited(42)); |
| manager.erase(42); |
| } |