| #pragma once |
| |
| #include "additional_data.hpp" |
| #include "ascii_string.hpp" |
| #include "callouts.hpp" |
| #include "data_interface.hpp" |
| #include "pel_types.hpp" |
| #include "registry.hpp" |
| #include "section.hpp" |
| #include "stream.hpp" |
| |
| namespace openpower |
| { |
| namespace pels |
| { |
| |
| constexpr uint8_t srcSectionVersion = 0x01; |
| constexpr uint8_t srcSectionSubtype = 0x01; |
| constexpr size_t numSRCHexDataWords = 8; |
| constexpr uint8_t srcVersion = 0x02; |
| constexpr uint8_t bmcSRCFormat = 0x55; |
| constexpr uint8_t primaryBMCPosition = 0x10; |
| constexpr size_t baseSRCSize = 72; |
| |
| enum class DetailLevel |
| { |
| message = 0x01, |
| json = 0x02 |
| }; |
| /** |
| * @class SRC |
| * |
| * SRC stands for System Reference Code. |
| * |
| * This class represents the SRC sections in the PEL, of which there are 2: |
| * primary SRC and secondary SRC. These are the same structurally, the |
| * difference is that the primary SRC must be the 3rd section in the PEL if |
| * present and there is only one of them, and the secondary SRC sections are |
| * optional and there can be more than one (by definition, for there to be a |
| * secondary SRC, a primary SRC must also exist). |
| * |
| * This section consists of: |
| * - An 8B header (Has the version, flags, hexdata word count, and size fields) |
| * - 8 4B words of hex data |
| * - An ASCII character string |
| * - An optional subsection for Callouts |
| */ |
| class SRC : public Section |
| { |
| public: |
| enum HeaderFlags |
| { |
| additionalSections = 0x01, |
| powerFaultEvent = 0x02, |
| hypDumpInit = 0x04, |
| i5OSServiceEventBit = 0x10, |
| virtualProgressSRC = 0x80 |
| }; |
| |
| /** |
| * @brief Enums for the error status bits in hex word 5 |
| * of BMC SRCs. |
| */ |
| enum class ErrorStatusFlags |
| { |
| deconfigured = 0x02000000, |
| guarded = 0x01000000 |
| }; |
| |
| SRC() = delete; |
| ~SRC() = default; |
| SRC(const SRC&) = delete; |
| SRC& operator=(const SRC&) = delete; |
| SRC(SRC&&) = delete; |
| SRC& operator=(SRC&&) = delete; |
| |
| /** |
| * @brief Constructor |
| * |
| * Fills in this class's data fields from the stream. |
| * |
| * @param[in] pel - the PEL data stream |
| */ |
| explicit SRC(Stream& pel); |
| |
| /** |
| * @brief Constructor |
| * |
| * Creates the section with data from the PEL message registry entry for |
| * this error, along with the AdditionalData property contents from the |
| * corresponding event log. |
| * |
| * @param[in] regEntry - The message registry entry for this event log |
| * @param[in] additionalData - The AdditionalData properties in this event |
| * log |
| * @param[in] dataIface - The DataInterface object |
| */ |
| SRC(const message::Entry& regEntry, const AdditionalData& additionalData, |
| const DataInterfaceBase& dataIface) : |
| SRC(regEntry, additionalData, nlohmann::json{}, dataIface) |
| { |
| } |
| |
| /** |
| * @brief Constructor |
| * |
| * Creates the section with data from the PEL message registry entry for |
| * this error, along with the AdditionalData property contents from the |
| * corresponding event log, and a JSON array of callouts to add. |
| * |
| * @param[in] regEntry - The message registry entry for this event log |
| * @param[in] additionalData - The AdditionalData properties in this event |
| * log |
| * @param[in] jsonCallouts - The array of JSON callouts, or an empty object. |
| * @param[in] dataIface - The DataInterface object |
| */ |
| SRC(const message::Entry& regEntry, const AdditionalData& additionalData, |
| const nlohmann::json& jsonCallouts, const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Flatten the section into the stream |
| * |
| * @param[in] stream - The stream to write to |
| */ |
| void flatten(Stream& stream) const override; |
| |
| /** |
| * @brief Returns the SRC version, which is a different field |
| * than the version byte in the section header. |
| * |
| * @return uint8_t |
| */ |
| uint8_t version() const |
| { |
| return _version; |
| } |
| |
| /** |
| * @brief Returns the flags byte |
| * |
| * @return uint8_t |
| */ |
| uint8_t flags() const |
| { |
| return _flags; |
| } |
| |
| /** |
| * @brief Returns the hex data word count. |
| * |
| * Even though there always 8 words, this returns 9 due to previous |
| * SRC version formats. |
| * |
| * @return uint8_t |
| */ |
| uint8_t hexWordCount() const |
| { |
| return _wordCount; |
| } |
| |
| /** |
| * @brief Returns the size of the SRC section, not including the header. |
| * |
| * @return uint16_t |
| */ |
| uint16_t size() const |
| { |
| return _size; |
| } |
| |
| /** |
| * @brief Returns the 8 hex data words. |
| * |
| * @return const std::array<uint32_t, numSRCHexDataWords>& |
| */ |
| const std::array<uint32_t, numSRCHexDataWords>& hexwordData() const |
| { |
| return _hexData; |
| } |
| |
| /** |
| * @brief Returns the ASCII string |
| * |
| * @return std::string |
| */ |
| std::string asciiString() const |
| { |
| return _asciiString->get(); |
| } |
| |
| /** |
| * @brief Returns the callouts subsection |
| * |
| * If no callouts, this unique_ptr will be empty |
| * |
| * @return const std::unique_ptr<src::Callouts>& |
| */ |
| const std::unique_ptr<src::Callouts>& callouts() const |
| { |
| return _callouts; |
| } |
| |
| /** |
| * @brief Returns the size of this section when flattened into a PEL |
| * |
| * @return size_t - the size of the section |
| */ |
| size_t flattenedSize() const |
| { |
| return _header.size; |
| } |
| |
| /** |
| * @brief Says if this SRC has additional subsections in it |
| * |
| * Note: The callouts section is the only possible subsection. |
| * |
| * @return bool |
| */ |
| inline bool hasAdditionalSections() const |
| { |
| return _flags & additionalSections; |
| } |
| |
| /** |
| * @brief Indicates if this event log is for a power fault. |
| * |
| * This comes from a field in the message registry for BMC |
| * generated PELs. |
| * |
| * @return bool |
| */ |
| inline bool isPowerFaultEvent() const |
| { |
| return _flags & powerFaultEvent; |
| } |
| |
| /** |
| * @brief Get the _hexData[] index to use based on the corresponding |
| * SRC word number. |
| * |
| * Converts the specification nomenclature to this data structure. |
| * See the _hexData documentation below for more information. |
| * |
| * @param[in] wordNum - The SRC word number, as defined by the spec. |
| * |
| * @return size_t The corresponding index into _hexData. |
| */ |
| inline size_t getWordIndexFromWordNum(size_t wordNum) const |
| { |
| assert(wordNum >= 2 && wordNum <= 9); |
| return wordNum - 2; |
| } |
| |
| /** |
| * @brief Get section in JSON. |
| * @param[in] registry - Registry object reference |
| * @param[in] plugins - Vector of strings of plugins found in filesystem |
| * @param[in] creatorID - Creator Subsystem ID from Private Header |
| * @return std::optional<std::string> - SRC section's JSON |
| */ |
| std::optional<std::string> getJSON(message::Registry& registry, |
| const std::vector<std::string>& plugins, |
| uint8_t creatorID) const override; |
| |
| /** |
| * @brief Get error details based on refcode and hexwords |
| * @param[in] registry - Registry object |
| * @param[in] type - detail level enum value : single message or full json |
| * @param[in] toCache - boolean to cache registry in memory, default=false |
| * @return std::optional<std::string> - Error details |
| */ |
| std::optional<std::string> getErrorDetails(message::Registry& registry, |
| DetailLevel type, |
| bool toCache = false) const; |
| |
| /** |
| * @brief Says if this SRC was created by the BMC (i.e. this code). |
| * |
| * @return bool - If created by the BMC or not |
| */ |
| bool isBMCSRC() const; |
| |
| private: |
| /** |
| * @brief Fills in the user defined hex words from the |
| * AdditionalData fields. |
| * |
| * When creating this section from a message registry entry, |
| * that entry has a field that says which AdditionalData property |
| * fields to use to fill in the user defined hex data words 6-9 |
| * (which correspond to hexData words 4-7). |
| * |
| * For example, given that AdditionalData is a map of string keys |
| * to string values, find the AdditionalData value for AdditionalData |
| * key X, convert it to a uint32_t, and save it in user data word Y. |
| * |
| * @param[in] regEntry - The message registry entry for the error |
| * @param[in] additionalData - The AdditionalData map |
| */ |
| void setUserDefinedHexWords(const message::Entry& regEntry, |
| const AdditionalData& additionalData); |
| /** |
| * @brief Fills in the object from the stream data |
| * |
| * @param[in] stream - The stream to read from |
| */ |
| void unflatten(Stream& stream); |
| |
| /** |
| * @brief Says if the word number is in the range of user defined words. |
| * |
| * This is only used for BMC generated SRCs, where words 6 - 9 are the |
| * user defined ones, meaning that setUserDefinedHexWords() will be |
| * used to fill them in based on the contents of the OpenBMC event log. |
| * |
| * @param[in] wordNum - The SRC word number, as defined by the spec. |
| * |
| * @return bool - If this word number can be filled in by the creator. |
| */ |
| inline bool isUserDefinedWord(size_t wordNum) const |
| { |
| return (wordNum >= 6) && (wordNum <= 9); |
| } |
| |
| /** |
| * @brief Sets the SRC format byte in the hex word data. |
| */ |
| inline void setBMCFormat() |
| { |
| _hexData[0] |= bmcSRCFormat; |
| } |
| |
| /** |
| * @brief Sets the hex word field that specifies which BMC |
| * (primary vs backup) created the error. |
| * |
| * Can be hardcoded until there are systems with redundant BMCs. |
| */ |
| inline void setBMCPosition() |
| { |
| _hexData[1] |= primaryBMCPosition; |
| } |
| |
| /** |
| * @brief Sets the motherboard CCIN hex word field |
| * |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void setMotherboardCCIN(const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Sets an error status bit in the SRC. |
| * |
| * @param[in] flag - The flag to set |
| */ |
| void setErrorStatusFlag(ErrorStatusFlags flag) |
| { |
| _hexData[3] |= static_cast<uint32_t>(flag); |
| } |
| |
| /** |
| * @brief Validates the section contents |
| * |
| * Updates _valid (in Section) with the results. |
| */ |
| void validate() override; |
| |
| /** |
| * @brief Get error description from message registry |
| * @param[in] regEntry - The message registry entry for the error |
| * @return std::optional<std::string> - Error message |
| */ |
| std::optional<std::string> |
| getErrorMessage(const message::Entry& regEntry) const; |
| |
| /** |
| * @brief Get Callout info in JSON |
| * @return std::optional<std::string> - Callout details |
| */ |
| std::optional<std::string> getCallouts() const; |
| |
| /** |
| * @brief Checks the AdditionalData property and the message registry |
| * JSON and adds any necessary callouts. |
| * |
| * The callout sources are the AdditionalData event log property |
| * and the message registry JSON. |
| * |
| * @param[in] regEntry - The message registry entry for the error |
| * @param[in] additionalData - The AdditionalData values |
| * @param[in] jsonCallouts - The array of JSON callouts, or an empty object |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void addCallouts(const message::Entry& regEntry, |
| const AdditionalData& additionalData, |
| const nlohmann::json& jsonCallouts, |
| const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Adds a FRU callout based on an inventory path |
| * |
| * @param[in] inventoryPath - The inventory item to call out |
| * @param[in] priority - An optional priority (uses high if nullopt) |
| * @param[in] locationCode - The expanded location code (or look it up) |
| * @param[in] dataIface - The DataInterface object |
| * @param[in] mrus - The MRUs to add to the callout |
| */ |
| void |
| addInventoryCallout(const std::string& inventoryPath, |
| const std::optional<CalloutPriority>& priority, |
| const std::optional<std::string>& locationCode, |
| const DataInterfaceBase& dataIface, |
| const std::vector<src::MRU::MRUCallout>& mrus = {}); |
| |
| /** |
| * @brief Returns the callouts to use from the registry entry. |
| * |
| * @param[in] regEntry - The message registry entry for the error |
| * @param[in] additionalData - The AdditionalData property |
| * @param[in] dataIface - The DataInterface object |
| */ |
| std::vector<message::RegistryCallout> |
| getRegistryCallouts(const message::Entry& regEntry, |
| const AdditionalData& additionalData, |
| const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Adds the FRU callouts from the list of registry callouts |
| * passed in to the SRC. |
| * |
| * The last parameter is used only in a special case when the first |
| * callout is a symbolic FRU with a trusted location code. See the |
| * addRegistryCallout documentation. |
| * |
| * @param[in] callouts - The message registry callouts to add |
| * @param[in] dataIface - The DataInterface object |
| * @param[in] trustedSymbolicFRUInvPath - The optional inventory path used |
| * in the symbolic FRU case. |
| */ |
| void addRegistryCallouts( |
| const std::vector<message::RegistryCallout>& callouts, |
| const DataInterfaceBase& dataIface, |
| std::optional<std::string> trustedSymbolicFRUInvPath); |
| |
| /** |
| * @brief Adds a single FRU callout from the message registry. |
| * |
| * If the last parameter is filled in, and the registry callout is a |
| * symbolic FRU callout with a trusted location code, and it has the |
| * 'useInventoryLocCode' member set to true, then the location code of |
| * that inventory item will be what is used for that trusted location code. |
| * |
| * @param[in] callout - The registry callout structure |
| * @param[in] dataIface - The DataInterface object |
| * @param[in] trustedSymbolicFRUInvPath - The optional inventory path used |
| * in the symbolic FRU case. |
| */ |
| void addRegistryCallout( |
| const message::RegistryCallout& callout, |
| const DataInterfaceBase& dataIface, |
| const std::optional<std::string>& trustedSymbolicFRUInvPath); |
| |
| /** |
| * @brief Creates the Callouts object _callouts |
| * so that callouts can be added to it. |
| */ |
| void createCalloutsObject() |
| { |
| if (!_callouts) |
| { |
| _callouts = std::make_unique<src::Callouts>(); |
| _flags |= additionalSections; |
| } |
| } |
| |
| /** |
| * @brief Adds any FRU callouts based on a device path in the |
| * AdditionalData parameter. |
| * |
| * @param[in] additionalData - The AdditionalData values |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void addDevicePathCallouts(const AdditionalData& additionalData, |
| const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Adds any FRU callouts specified in the incoming JSON. |
| * |
| * @param[in] jsonCallouts - The JSON array of callouts |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void addJSONCallouts(const nlohmann::json& jsonCallouts, |
| const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Adds a single callout based on the JSON |
| * |
| * @param[in] jsonCallouts - A single callout entry |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void addJSONCallout(const nlohmann::json& jsonCallout, |
| const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief Extracts a CalloutPriority value from the json |
| * using the 'Priority' key. |
| * |
| * @param[in] json - A JSON object that contains the priority key |
| * |
| * @return CalloutPriority - The priority value |
| */ |
| CalloutPriority getPriorityFromJSON(const nlohmann::json& json); |
| |
| /** |
| * @brief Exracts MRU values and their priorities from the |
| * input JSON array. |
| * |
| * @param[in] mruJSON - The JSON array |
| */ |
| std::vector<src::MRU::MRUCallout> |
| getMRUsFromJSON(const nlohmann::json& mruJSON); |
| |
| /** |
| * @brief Sets the dump status |
| * |
| * @param[in] dataIface - The DataInterface object |
| */ |
| void setDumpStatus(const DataInterfaceBase& dataIface); |
| |
| /** |
| * @brief The SRC version field |
| */ |
| uint8_t _version; |
| |
| /** |
| * @brief The SRC flags field |
| */ |
| uint8_t _flags; |
| |
| /** |
| * @brief A byte of reserved data after the flags field |
| */ |
| uint8_t _reserved1B; |
| |
| /** |
| * @brief The hex data word count. |
| * |
| * To be compatible with previous versions of SRCs, this is |
| * number of hex words (8) + 1 = 9. |
| */ |
| uint8_t _wordCount; |
| |
| /** |
| * @brief Two bytes of reserved data after the hex word count |
| */ |
| uint16_t _reserved2B; |
| |
| /** |
| * @brief The total size of the SRC section, not including the section |
| * header. |
| */ |
| uint16_t _size; |
| |
| /** |
| * @brief The SRC 'hex words'. |
| * |
| * In the spec these are referred to as SRC words 2 - 9 as words 0 and 1 |
| * are filled by the 8 bytes of fields from above. |
| */ |
| std::array<uint32_t, numSRCHexDataWords> _hexData; |
| |
| /** |
| * @brief The 32 byte ASCII character string of the SRC |
| * |
| * It is padded with spaces to fill the 32 bytes. |
| * An example is: |
| * "BD8D1234 " |
| * |
| * That first word is what is commonly referred to as the refcode, and |
| * sometimes also called an SRC. |
| */ |
| std::unique_ptr<src::AsciiString> _asciiString; |
| |
| /** |
| * @brief The callouts subsection. |
| * |
| * Optional and only created if there are callouts. |
| */ |
| std::unique_ptr<src::Callouts> _callouts; |
| }; |
| |
| } // namespace pels |
| } // namespace openpower |