test/openpower-pels/pel_manager_test.cpp

/**
 * Copyright © 2019 IBM Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "extensions/openpower-pels/manager.hpp"
#include "log_manager.hpp"
#include "mocks.hpp"
#include "pel_utils.hpp"

#include <sdbusplus/test/sdbus_mock.hpp>
#include <xyz/openbmc_project/Common/error.hpp>

#include <fstream>
#include <regex>

#include <gtest/gtest.h>

using namespace openpower::pels;
namespace fs = std::filesystem;

using ::testing::NiceMock;
using ::testing::Return;
using json = nlohmann::json;

class TestLogger
{
  public:
    void log(const std::string& name, phosphor::logging::Entry::Level level,
             const EventLogger::ADMap& additionalData)
    {
        errName = name;
        errLevel = level;
        ad = additionalData;
    }

    std::string errName;
    phosphor::logging::Entry::Level errLevel;
    EventLogger::ADMap ad;
};

class ManagerTest : public CleanPELFiles
{
  public:
    ManagerTest() :
        bus(sdbusplus::get_mocked_new(&sdbusInterface)),
        logManager(bus, "logging_path")
    {
        sd_event_default(&sdEvent);
    }

    fs::path makeTempDir()
    {
        char path[] = "/tmp/tempnameXXXXXX";
        std::filesystem::path dir = mkdtemp(path);
        dirsToRemove.push_back(dir);
        return dir;
    }

    ~ManagerTest()
    {
        for (const auto& d : dirsToRemove)
        {
            std::filesystem::remove_all(d);
        }
        sd_event_unref(sdEvent);
    }

    NiceMock<sdbusplus::SdBusMock> sdbusInterface;
    sdbusplus::bus_t bus;
    phosphor::logging::internal::Manager logManager;
    sd_event* sdEvent;
    TestLogger logger;
    std::vector<std::filesystem::path> dirsToRemove;
};

std::optional<fs::path> findAnyPELInRepo()
{
    // PELs are named <timestamp>_<ID>
    std::regex expr{"\\d+_\\d+"};

    for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs"))
    {
        if (std::regex_search(f.path().string(), expr))
        {
            return f.path();
        }
    }
    return std::nullopt;
}

size_t countPELsInRepo()
{
    size_t count = 0;
    std::regex expr{"\\d+_\\d+"};

    for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs"))
    {
        if (std::regex_search(f.path().string(), expr))
        {
            count++;
        }
    }
    return count;
}

void deletePELFile(uint32_t id)
{
    char search[20];

    sprintf(search, "\\d+_%.8X", id);
    std::regex expr{search};

    for (auto& f : fs::directory_iterator(getPELRepoPath() / "logs"))
    {
        if (std::regex_search(f.path().string(), expr))
        {
            fs::remove(f.path());
            break;
        }
    }
}

// Test that using the RAWPEL=<file> with the Manager::create() call gets
// a PEL saved in the repository.
TEST_F(ManagerTest, TestCreateWithPEL)
{
    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    // Create a PEL, write it to a file, and pass that filename into
    // the create function.
    auto data = pelDataFactory(TestPELType::pelSimple);

    fs::path pelFilename = makeTempDir() / "rawpel";
    std::ofstream pelFile{pelFilename};
    pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
    pelFile.close();

    std::map<std::string, std::string> additionalData{
        {"RAWPEL", pelFilename.string()}};
    std::vector<std::string> associations;

    manager.create("error message", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // Find the file in the PEL repository directory
    auto pelPathInRepo = findAnyPELInRepo();

    EXPECT_TRUE(pelPathInRepo);

    // Now remove it based on its OpenBMC event log ID
    manager.erase(42);

    pelPathInRepo = findAnyPELInRepo();

    EXPECT_FALSE(pelPathInRepo);
}

TEST_F(ManagerTest, TestCreateWithInvalidPEL)
{
    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    // Create a PEL, write it to a file, and pass that filename into
    // the create function.
    auto data = pelDataFactory(TestPELType::pelSimple);

    // Truncate it to make it invalid.
    data.resize(200);

    fs::path pelFilename = makeTempDir() / "rawpel";
    std::ofstream pelFile{pelFilename};
    pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
    pelFile.close();

    std::map<std::string, std::string> additionalData{
        {"RAWPEL", pelFilename.string()}};
    std::vector<std::string> associations;

    manager.create("error message", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // Run the event loop to log the bad PEL event
    sdeventplus::Event e{sdEvent};
    e.run(std::chrono::milliseconds(1));

    PEL invalidPEL{data};
    EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.BadHostPEL");
    EXPECT_EQ(logger.errLevel, phosphor::logging::Entry::Level::Error);
    EXPECT_EQ(std::stoi(logger.ad["PLID"], nullptr, 16), invalidPEL.plid());
    EXPECT_EQ(logger.ad["OBMC_LOG_ID"], "42");
    EXPECT_EQ(logger.ad["SRC"], (*invalidPEL.primarySRC())->asciiString());
    EXPECT_EQ(logger.ad["PEL_SIZE"], std::to_string(data.size()));

    // Check that the bad PEL data was saved to a file.
    auto badPELData = readPELFile(getPELRepoPath() / "badPEL");
    EXPECT_EQ(*badPELData, data);
}

// Test that the message registry can be used to build a PEL.
TEST_F(ManagerTest, TestCreateWithMessageRegistry)
{
    const auto registry = R"(
{
    "PELs":
    [
        {
            "Name": "xyz.openbmc_project.Error.Test",
            "Subsystem": "power_supply",
            "ActionFlags": ["service_action", "report"],
            "SRC":
            {
                "ReasonCode": "0x2030"
            },
            "Callouts": [
                {
                    "CalloutList": [
                        {"Priority": "high", "Procedure": "BMC0001"},
                        {"Priority": "medium", "SymbolicFRU": "service_docs"}
                    ]
                }
            ],
            "Documentation":
            {
                "Description": "A PGOOD Fault",
                "Message": "PS had a PGOOD Fault"
            }
        },
        {
            "Name": "xyz.openbmc_project.Logging.Error.Default",
            "Subsystem": "bmc_firmware",
            "SRC":
            {
                "ReasonCode": "0x2031"
            },
            "Documentation":
            {
                "Description": "The entry used when no match found",
                "Message": "This is a generic SRC"
            }
        }
    ]
}
)";

    auto path = getPELReadOnlyDataPath();
    fs::create_directories(path);
    path /= "message_registry.json";

    std::ofstream registryFile{path};
    registryFile << registry;
    registryFile.close();

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    std::map<std::string, std::string> additionalData{{"FOO", "BAR"}};
    std::vector<std::string> associations;

    // Create the event log to create the PEL from.
    manager.create("xyz.openbmc_project.Error.Test", 33, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // Ensure a PEL was created in the repository
    auto pelFile = findAnyPELInRepo();
    ASSERT_TRUE(pelFile);

    auto data = readPELFile(*pelFile);
    PEL pel(*data);

    // Spot check it.  Other testcases cover the details.
    EXPECT_TRUE(pel.valid());
    EXPECT_EQ(pel.obmcLogID(), 33);
    EXPECT_EQ(pel.primarySRC().value()->asciiString(),
              "BD612030                        ");
    // Check if the eventId creation is good
    EXPECT_EQ(manager.getEventId(pel),
              "BD612030 00000055 00000010 00000000 00000000 00000000 00000000 "
              "00000000 00000000");
    // Check if resolution property creation is good
    EXPECT_EQ(manager.getResolution(pel),
              "1. Priority: High, Procedure: BMC0001\n2. Priority: Medium, PN: "
              "SVCDOCS\n");

    // Remove it
    manager.erase(33);
    pelFile = findAnyPELInRepo();
    EXPECT_FALSE(pelFile);

    // Create an event log that can't be found in the registry.
    // In this case, xyz.openbmc_project.Logging.Error.Default will
    // be used as the key instead to find a registry match.
    manager.create("xyz.openbmc_project.Error.Foo", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // Ensure a PEL was still created in the repository
    pelFile = findAnyPELInRepo();
    ASSERT_TRUE(pelFile);

    data = readPELFile(*pelFile);
    PEL newPEL(*data);

    EXPECT_TRUE(newPEL.valid());
    EXPECT_EQ(newPEL.obmcLogID(), 42);
    EXPECT_EQ(newPEL.primarySRC().value()->asciiString(),
              "BD8D2031                        ");

    // Check for both the original AdditionalData item as well as
    // the ERROR_NAME item that should contain the error message
    // property that wasn't found.
    std::string errorName;
    std::string adItem;

    for (const auto& section : newPEL.optionalSections())
    {
        if (SectionID::userData == static_cast<SectionID>(section->header().id))
        {
            if (UserDataFormat::json ==
                static_cast<UserDataFormat>(section->header().subType))
            {
                auto ud = static_cast<UserData*>(section.get());

                // Check that there was a UserData section added that
                // contains debug details about the device.
                const auto& d = ud->data();
                std::string jsonString{d.begin(), d.end()};
                auto json = nlohmann::json::parse(jsonString);

                if (json.contains("ERROR_NAME"))
                {
                    errorName = json["ERROR_NAME"].get<std::string>();
                }

                if (json.contains("FOO"))
                {
                    adItem = json["FOO"].get<std::string>();
                }
            }
        }
        if (!errorName.empty())
        {
            break;
        }
    }

    EXPECT_EQ(errorName, "xyz.openbmc_project.Error.Foo");
    EXPECT_EQ(adItem, "BAR");
}

TEST_F(ManagerTest, TestDBusMethods)
{
    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    // Create a PEL, write it to a file, and pass that filename into
    // the create function so there's one in the repo.
    auto data = pelDataFactory(TestPELType::pelSimple);

    fs::path pelFilename = makeTempDir() / "rawpel";
    std::ofstream pelFile{pelFilename};
    pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
    pelFile.close();

    std::map<std::string, std::string> additionalData{
        {"RAWPEL", pelFilename.string()}};
    std::vector<std::string> associations;

    manager.create("error message", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // getPELFromOBMCID
    auto newData = manager.getPELFromOBMCID(42);
    EXPECT_EQ(newData.size(), data.size());

    // Read the PEL to get the ID for later
    PEL pel{newData};
    auto id = pel.id();

    EXPECT_THROW(
        manager.getPELFromOBMCID(id + 1),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // getPEL
    auto unixfd = manager.getPEL(id);

    // Get the size
    struct stat s;
    int r = fstat(unixfd, &s);
    ASSERT_EQ(r, 0);
    auto size = s.st_size;

    // Open the FD and check the contents
    FILE* fp = fdopen(unixfd, "r");
    ASSERT_NE(fp, nullptr);

    std::vector<uint8_t> fdData;
    fdData.resize(size);
    r = fread(fdData.data(), 1, size, fp);
    EXPECT_EQ(r, size);

    EXPECT_EQ(newData, fdData);

    fclose(fp);

    // Run the event loop to close the FD
    sdeventplus::Event e{sdEvent};
    e.run(std::chrono::milliseconds(1));

    EXPECT_THROW(
        manager.getPEL(id + 1),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // hostAck
    manager.hostAck(id);

    EXPECT_THROW(
        manager.hostAck(id + 1),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // hostReject
    manager.hostReject(id, Manager::RejectionReason::BadPEL);

    // Run the event loop to log the bad PEL event
    e.run(std::chrono::milliseconds(1));

    EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.SentBadPELToHost");
    EXPECT_EQ(id, std::stoi(logger.ad["BAD_ID"], nullptr, 16));

    manager.hostReject(id, Manager::RejectionReason::HostFull);

    EXPECT_THROW(
        manager.hostReject(id + 1, Manager::RejectionReason::BadPEL),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // GetPELIdFromBMCLogId
    EXPECT_EQ(pel.id(), manager.getPELIdFromBMCLogId(pel.obmcLogID()));
    EXPECT_THROW(
        manager.getPELIdFromBMCLogId(pel.obmcLogID() + 1),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // GetBMCLogIdFromPELId
    EXPECT_EQ(pel.obmcLogID(), manager.getBMCLogIdFromPELId(pel.id()));
    EXPECT_THROW(
        manager.getBMCLogIdFromPELId(pel.id() + 1),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);
}

// An ESEL from the wild
const std::string esel{
    "00 00 df 00 00 00 00 20 00 04 12 01 6f aa 00 00 "
    "50 48 00 30 01 00 33 00 20 23 05 11 10 20 20 00 00 00 00 07 5c d5 50 db "
    "42 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 4e 90 00 00 4e "
    "55 48 00 18 01 00 09 00 8a 03 40 00 00 00 00 00 ff ff 00 00 00 00 00 00 "
    "50 53 00 50 01 01 00 00 02 00 00 09 33 2d 00 48 00 00 00 e0 00 00 10 00 "
    "00 00 00 00 00 20 00 00 00 0c 00 02 00 00 00 fa 00 00 0c e4 00 00 00 12 "
    "42 43 38 41 33 33 32 44 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 "
    "20 20 20 20 20 20 20 20 55 44 00 1c 01 06 01 00 02 54 41 4b 00 00 00 06 "
    "00 00 00 55 00 01 f9 20 00 00 00 00 55 44 00 24 01 06 01 00 01 54 41 4b "
    "00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 23 01 00 02 00 05 00 00 "
    "55 44 00 0c 01 0b 01 00 0f 01 00 00 55 44 00 10 01 04 01 00 0f 9f de 6a "
    "00 01 00 00 55 44 00 7c 00 0c 01 00 00 13 0c 02 00 fa 0c e4 16 00 01 2c "
    "0c 1c 16 00 00 fa 0a f0 14 00 00 fa 0b b8 14 00 00 be 09 60 12 00 01 2c "
    "0d 7a 12 00 00 fa 0c 4e 10 00 00 fa 0c e4 10 00 00 be 0a 8c 16 00 01 2c "
    "0c 1c 16 00 01 09 09 f6 16 00 00 fa 09 f6 14 00 00 fa 0b b8 14 00 00 fa "
    "0a f0 14 00 00 be 08 ca 12 00 01 2c 0c e4 12 00 00 fa 0b 54 10 00 00 fa "
    "0c 2d 10 00 00 be 08 ca 55 44 00 58 01 03 01 00 00 00 00 00 00 05 31 64 "
    "00 00 00 00 00 05 0d d4 00 00 00 00 40 5f 06 e0 00 00 00 00 40 5d d2 00 "
    "00 00 00 00 40 57 d3 d0 00 00 00 00 40 58 f6 a0 00 00 00 00 40 54 c9 34 "
    "00 00 00 00 40 55 9a 10 00 00 00 00 40 4c 0a 80 00 00 00 00 00 00 27 14 "
    "55 44 01 84 01 01 01 00 48 6f 73 74 62 6f 6f 74 20 42 75 69 6c 64 20 49 "
    "44 3a 20 68 6f 73 74 62 6f 6f 74 2d 66 65 63 37 34 64 66 2d 70 30 61 38 "
    "37 64 63 34 2f 68 62 69 63 6f 72 65 2e 62 69 6e 00 49 42 4d 2d 77 69 74 "
    "68 65 72 73 70 6f 6f 6e 2d 4f 50 39 2d 76 32 2e 34 2d 39 2e 32 33 34 0a "
    "09 6f 70 2d 62 75 69 6c 64 2d 38 32 66 34 63 66 30 0a 09 62 75 69 6c 64 "
    "72 6f 6f 74 2d 32 30 31 39 2e 30 35 2e 32 2d 31 30 2d 67 38 39 35 39 31 "
    "31 34 0a 09 73 6b 69 62 6f 6f 74 2d 76 36 2e 35 2d 31 38 2d 67 34 37 30 "
    "66 66 62 35 66 32 39 64 37 0a 09 68 6f 73 74 62 6f 6f 74 2d 66 65 63 37 "
    "34 64 66 2d 70 30 61 38 37 64 63 34 0a 09 6f 63 63 2d 65 34 35 39 37 61 "
    "62 0a 09 6c 69 6e 75 78 2d 35 2e 32 2e 31 37 2d 6f 70 65 6e 70 6f 77 65 "
    "72 31 2d 70 64 64 63 63 30 33 33 0a 09 70 65 74 69 74 62 6f 6f 74 2d 76 "
    "31 2e 31 30 2e 34 0a 09 6d 61 63 68 69 6e 65 2d 78 6d 6c 2d 63 36 32 32 "
    "63 62 35 2d 70 37 65 63 61 62 33 64 0a 09 68 6f 73 74 62 6f 6f 74 2d 62 "
    "69 6e 61 72 69 65 73 2d 36 36 65 39 61 36 30 0a 09 63 61 70 70 2d 75 63 "
    "6f 64 65 2d 70 39 2d 64 64 32 2d 76 34 0a 09 73 62 65 2d 36 30 33 33 30 "
    "65 30 0a 09 68 63 6f 64 65 2d 68 77 30 39 32 31 31 39 61 2e 6f 70 6d 73 "
    "74 0a 00 00 55 44 00 70 01 04 01 00 0f 9f de 6a 00 05 00 00 07 5f 1d f4 "
    "30 32 43 59 34 37 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
    "0b ac 54 02 59 41 31 39 33 34 36 39 37 30 35 38 00 00 00 00 00 00 05 22 "
    "a1 58 01 8a 00 58 40 20 17 18 4d 2c 00 00 00 fc 01 a1 00 00 55 44 00 14 "
    "01 08 01 00 00 00 00 01 00 00 00 5a 00 00 00 05 55 44 03 fc 01 15 31 00 "
    "01 28 00 42 46 41 50 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 f4 "
    "00 00 00 00 00 00 03 f4 00 00 00 0b 00 00 00 00 00 00 00 3d 2c 9b c2 84 "
    "00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 09 "
    "00 00 00 00 00 11 bd 20 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 "
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 00 00 00 00 00 01 2c "
    "00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c 1c 00 00 00 64 00 00 00 3d "
    "2c 9b d1 11 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 "
    "00 00 00 0a 00 00 00 00 00 13 b5 a0 00 00 00 00 00 01 f8 80 00 00 00 00 "
    "00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 "
    "00 00 00 be 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0a 8c 00 00 00 64 "
    "00 00 00 3d 2c 9b df 98 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 "
    "00 00 00 00 00 00 00 0b 00 00 00 00 00 15 ae 20 00 00 00 00 00 01 f8 80 "
    "00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 "
    "00 00 00 00 00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c e4 "
    "00 00 00 64 00 00 00 3d 2c 9b ea b7 00 00 01 e4 00 48 43 4f fb ed 70 b1 "
    "00 00 02 01 00 00 00 00 00 00 00 0c 00 00 00 00 00 17 a6 a0 00 00 00 00 "
    "00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 "
    "00 00 00 12 00 00 00 00 00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 "
    "00 00 0c 4e 00 00 00 64 00 00 00 3d 2c 9b f6 27 00 00 01 e4 00 48 43 4f "
    "fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0d 00 00 00 00 00 19 9f 20 "
    "00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 "
    "00 00 00 00 00 00 00 12 00 00 00 00 00 00 01 2c 00 00 00 00 00 00 07 d0 "
    "00 00 00 00 00 00 0d 7a 00 00 00 64 00 00 00 3d 2c 9c 05 75 00 00 01 e4 "
    "00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0e 00 00 00 00 "
    "00 1b 97 a0 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 00 00 00 00 "
    "00 00 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 be 00 00 00 00 "
    "00 00 07 d0 00 00 00 00 00 00 09 60 00 00 00 64 00 00 00 3d 2c 9c 11 29 "
    "00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 00 00 00 0f "
    "00 00 00 00 00 1d 90 20 00 00 00 00 00 01 f8 80 00 00 00 00 00 00 00 01 "
    "00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 fa "
    "00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0b b8 00 00 00 64 00 00 00 3d "
    "2c 9c 1c 45 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 00 00 00 00 "
    "00 00 00 10 00 00 00 00 00 1f 88 a0 00 00 00 00 00 01 f8 80 00 00 00 00 "
    "00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 00 00 00 "
    "00 00 00 fa 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0a f0 00 00 00 64 "
    "00 00 00 3d 2c 9c 2b 14 00 00 01 e4 00 48 43 4f fb ed 70 b1 00 00 02 01 "
    "00 00 00 00 00 00 00 11 00 00 00 00 00 21 81 20 00 00 00 00 00 01 f8 80 "
    "00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 "
    "00 00 00 00 00 00 01 2c 00 00 00 00 00 00 07 d0 00 00 00 00 00 00 0c 1c "
    "00 00 00 64 00 00 00 3d 2d 6d 8f 9e 00 00 01 e4 00 00 43 4f 52 d7 9c 36 "
    "00 00 04 73 00 00 00 1c 00 00 00 3d 2d 6d 99 ac 00 00 01 e4 00 10 43 4f "
    "3f f2 02 3d 00 00 05 58 00 00 00 00 02 00 00 01 00 00 00 00 00 00 00 40 "
    "00 00 00 2c 55 44 00 30 01 15 31 00 01 28 00 42 46 41 50 49 5f 44 42 47 "
    "00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 28 00 00 00 00 "
    "00 00 00 00 55 44 01 74 01 15 31 00 01 28 00 42 46 41 50 49 5f 49 00 00 "
    "00 00 00 00 00 00 00 00 00 00 01 6c 00 00 00 00 00 00 01 6c 00 00 00 0b "
    "00 00 00 00 00 00 00 3c 0d 52 18 5e 00 00 01 e4 00 08 43 4f 46 79 94 13 "
    "00 00 0a 5b 00 00 00 00 00 00 2c 00 00 00 00 24 00 00 00 3c 0d 6b 26 6c "
    "00 00 01 e4 00 00 43 4f 4e 9b 18 74 00 00 01 03 00 00 00 1c 00 00 00 3c "
    "12 b9 2d 13 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 00 00 00 1c "
    "00 00 00 3c 13 02 73 53 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 "
    "00 00 00 1c 00 00 00 3c 13 04 7c 94 00 00 01 e4 00 00 43 4f ea 31 ed d4 "
    "00 00 05 c4 00 00 00 1c 00 00 00 3c 13 06 ad e1 00 00 01 e4 00 00 43 4f "
    "ea 31 ed d4 00 00 05 c4 00 00 00 1c 00 00 00 3c 13 07 3f 77 00 00 01 e4 "
    "00 00 43 4f 5e 4a 55 32 00 00 10 f2 00 00 00 1c 00 00 00 3c 13 07 4e e4 "
    "00 00 01 e4 00 00 43 4f 5e 4a 55 32 00 00 0d 68 00 00 00 1c 00 00 00 3c "
    "13 36 79 18 00 00 01 e4 00 00 43 4f ea 31 ed d4 00 00 05 c4 00 00 00 1c "
    "00 00 00 3d 2c 9c 36 70 00 00 01 e4 00 00 43 4f 23 45 90 97 00 00 02 47 "
    "00 00 00 1c 00 00 00 3d 2d 6d a3 ed 00 00 01 e4 00 08 43 4f 74 3a 5b 1a "
    "00 00 04 cc 00 00 00 00 02 00 00 01 00 00 00 24 55 44 00 30 01 15 31 00 "
    "01 28 00 42 53 43 41 4e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 "
    "00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 00"};

TEST_F(ManagerTest, TestESELToRawData)
{
    auto data = Manager::eselToRawData(esel);

    EXPECT_EQ(data.size(), 2464);

    PEL pel{data};
    EXPECT_TRUE(pel.valid());
}

TEST_F(ManagerTest, TestCreateWithESEL)
{
    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    {
        std::map<std::string, std::string> additionalData{{"ESEL", esel}};
        std::vector<std::string> associations;

        manager.create("error message", 37, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        auto data = manager.getPELFromOBMCID(37);
        PEL pel{data};
        EXPECT_TRUE(pel.valid());
    }

    // Now an invalid one
    {
        std::string adItem = esel;

        // Crop it
        adItem.resize(adItem.size() - 300);

        std::map<std::string, std::string> additionalData{{"ESEL", adItem}};
        std::vector<std::string> associations;

        manager.create("error message", 38, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        EXPECT_THROW(
            manager.getPELFromOBMCID(38),
            sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

        // Run the event loop to log the bad PEL event
        sdeventplus::Event e{sdEvent};
        e.run(std::chrono::milliseconds(1));

        EXPECT_EQ(logger.errName, "org.open_power.Logging.Error.BadHostPEL");
        EXPECT_EQ(logger.errLevel, phosphor::logging::Entry::Level::Error);
    }
}

// Test that PELs will be pruned when necessary
TEST_F(ManagerTest, TestPruning)
{
    sdeventplus::Event e{sdEvent};

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    // Create 25 1000B (4096B on disk each, which is what is used for
    // pruning) BMC non-informational PELs in the 100KB repository.  After
    // the 24th one, the repo will be 96% full and a prune should be
    // triggered to remove all but 7 to get under 30% full.  Then when the
    // 25th is added there will be 8 left.

    auto dir = makeTempDir();
    for (int i = 1; i <= 25; i++)
    {
        auto data = pelFactory(42, 'O', 0x40, 0x8800, 1000);

        fs::path pelFilename = dir / "rawpel";
        std::ofstream pelFile{pelFilename};
        pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
        pelFile.close();

        std::map<std::string, std::string> additionalData{
            {"RAWPEL", pelFilename.string()}};
        std::vector<std::string> associations;

        manager.create("error message", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        // Simulate the code getting back to the event loop
        // after each create.
        e.run(std::chrono::milliseconds(1));

        if (i < 24)
        {
            EXPECT_EQ(countPELsInRepo(), i);
        }
        else if (i == 24)
        {
            // Prune occured
            EXPECT_EQ(countPELsInRepo(), 7);
        }
        else // i == 25
        {
            EXPECT_EQ(countPELsInRepo(), 8);
        }
    }

    try
    {
        // Make sure the 8 newest ones are still found.
        for (uint32_t i = 0; i < 8; i++)
        {
            manager.getPEL(0x50000012 + i);
        }
    }
    catch (
        const sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument&
            ex)
    {
        ADD_FAILURE() << "PELs should have all been found";
    }
}

// Test that manually deleting a PEL file will be recognized by the code.
TEST_F(ManagerTest, TestPELManualDelete)
{
    sdeventplus::Event e{sdEvent};

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto dir = makeTempDir();
    fs::path pelFilename = dir / "rawpel";

    std::map<std::string, std::string> additionalData{
        {"RAWPEL", pelFilename.string()}};
    std::vector<std::string> associations;

    // Add 20 PELs, they will get incrementing IDs like
    // 0x50000001, 0x50000002, etc.
    for (int i = 1; i <= 20; i++)
    {
        std::ofstream pelFile{pelFilename};
        pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
        pelFile.close();

        manager.create("error message", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        // Sanity check this ID is really there so we can test
        // it was deleted later.  This will throw an exception if
        // not present.
        manager.getPEL(0x50000000 + i);

        // Run an event loop pass where the internal FD is deleted
        // after the getPEL function call.
        e.run(std::chrono::milliseconds(1));
    }

    EXPECT_EQ(countPELsInRepo(), 20);

    deletePELFile(0x50000001);

    // Run a single event loop pass so the inotify event can run
    e.run(std::chrono::milliseconds(1));

    EXPECT_EQ(countPELsInRepo(), 19);

    EXPECT_THROW(
        manager.getPEL(0x50000001),
        sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);

    // Delete a few more, they should all get handled in the same
    // event loop pass
    std::vector<uint32_t> toDelete{0x50000002, 0x50000003, 0x50000004,
                                   0x50000005, 0x50000006};
    std::for_each(toDelete.begin(), toDelete.end(),
                  [](auto i) { deletePELFile(i); });

    e.run(std::chrono::milliseconds(1));

    EXPECT_EQ(countPELsInRepo(), 14);

    std::for_each(toDelete.begin(), toDelete.end(), [&manager](const auto i) {
        EXPECT_THROW(
            manager.getPEL(i),
            sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);
    });
}

// Test that deleting all PELs at once is handled OK.
TEST_F(ManagerTest, TestPELManualDeleteAll)
{
    sdeventplus::Event e{sdEvent};

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto dir = makeTempDir();
    fs::path pelFilename = dir / "rawpel";

    std::map<std::string, std::string> additionalData{
        {"RAWPEL", pelFilename.string()}};
    std::vector<std::string> associations;

    // Add 200 PELs, they will get incrementing IDs like
    // 0x50000001, 0x50000002, etc.
    for (int i = 1; i <= 200; i++)
    {
        std::ofstream pelFile{pelFilename};
        pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
        pelFile.close();

        manager.create("error message", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        // Sanity check this ID is really there so we can test
        // it was deleted later.  This will throw an exception if
        // not present.
        manager.getPEL(0x50000000 + i);

        // Run an event loop pass where the internal FD is deleted
        // after the getPEL function call.
        e.run(std::chrono::milliseconds(1));
    }

    // Delete them all at once
    auto logPath = getPELRepoPath() / "logs";
    std::string cmd = "rm " + logPath.string() + "/*_*";

    {
        auto rc = system(cmd.c_str());
        EXPECT_EQ(rc, 0);
    }

    EXPECT_EQ(countPELsInRepo(), 0);

    // It will take 5 event loop passes to process them all
    for (int i = 0; i < 5; i++)
    {
        e.run(std::chrono::milliseconds(1));
    }

    for (int i = 1; i <= 200; i++)
    {
        EXPECT_THROW(
            manager.getPEL(0x50000000 + i),
            sdbusplus::xyz::openbmc_project::Common::Error::InvalidArgument);
    }
}

// Test that fault LEDs are turned on when PELs are created
TEST_F(ManagerTest, TestServiceIndicators)
{
    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    MockDataInterface* mockIface =
        reinterpret_cast<MockDataInterface*>(dataIface.get());

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    // Add a PEL with a callout as if hostboot added it
    {
        EXPECT_CALL(*mockIface, getInventoryFromLocCode("U42", 0, true))
            .WillOnce(
                Return(std::vector<std::string>{"/system/chassis/processor"}));

        EXPECT_CALL(*mockIface,
                    setFunctional("/system/chassis/processor", false))
            .Times(1);

        // This hostboot PEL has a single hardware callout in it.
        auto data = pelFactory(1, 'B', 0x20, 0xA400, 500);

        fs::path pelFilename = makeTempDir() / "rawpel";
        std::ofstream pelFile{pelFilename};
        pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
        pelFile.close();

        std::map<std::string, std::string> additionalData{
            {"RAWPEL", pelFilename.string()}};
        std::vector<std::string> associations;

        manager.create("error message", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);
    }

    // Add a BMC PEL with a callout that uses the message registry
    {
        std::vector<std::string> names{"systemA"};
        EXPECT_CALL(*mockIface, getSystemNames)
            .Times(1)
            .WillOnce(Return(names));

        EXPECT_CALL(*mockIface, expandLocationCode("P42-C23", 0))
            .WillOnce(Return("U42-P42-C23"));

        // First call to this is when building the Callout section
        EXPECT_CALL(*mockIface, getInventoryFromLocCode("P42-C23", 0, false))
            .WillOnce(
                Return(std::vector<std::string>{"/system/chassis/processor"}));

        // Second call to this is finding the associated LED group
        EXPECT_CALL(*mockIface, getInventoryFromLocCode("U42-P42-C23", 0, true))
            .WillOnce(
                Return(std::vector<std::string>{"/system/chassis/processor"}));

        EXPECT_CALL(*mockIface,
                    setFunctional("/system/chassis/processor", false))
            .Times(1);

        const auto registry = R"(
        {
            "PELs":
            [
                {
                    "Name": "xyz.openbmc_project.Error.Test",
                    "Subsystem": "power_supply",
                    "ActionFlags": ["service_action", "report"],
                    "SRC":
                    {
                        "ReasonCode": "0x2030"
                    },
                    "Callouts": [
                        {
                            "CalloutList": [
                                {"Priority": "high", "LocCode": "P42-C23"}
                            ]
                        }
                    ],
                    "Documentation":
                    {
                        "Description": "Test Error",
                        "Message": "Test Error"
                    }
                }
            ]
        })";

        auto path = getPELReadOnlyDataPath();
        fs::create_directories(path);
        path /= "message_registry.json";

        std::ofstream registryFile{path};
        registryFile << registry;
        registryFile.close();

        std::map<std::string, std::string> additionalData;
        std::vector<std::string> associations;

        manager.create("xyz.openbmc_project.Error.Test", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);
    }
}

// Test for duplicate PELs moved to archive folder
TEST_F(ManagerTest, TestDuplicatePEL)
{
    sdeventplus::Event e{sdEvent};
    size_t count = 0;

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    for (int i = 0; i < 2; i++)
    {
        // This hostboot PEL has a single hardware callout in it.
        auto data = pelFactory(1, 'B', 0x20, 0xA400, 500);

        fs::path pelFilename = makeTempDir() / "rawpel";
        std::ofstream pelFile{pelFilename};
        pelFile.write(reinterpret_cast<const char*>(data.data()), data.size());
        pelFile.close();

        std::map<std::string, std::string> additionalData{
            {"RAWPEL", pelFilename.string()}};
        std::vector<std::string> associations;

        manager.create("error message", 42, 0,
                       phosphor::logging::Entry::Level::Error, additionalData,
                       associations);

        e.run(std::chrono::milliseconds(1));
    }

    for (auto& f :
         fs::directory_iterator(getPELRepoPath() / "logs" / "archive"))
    {
        if (fs::is_regular_file(f.path()))
        {
            count++;
        }
    }

    // Get count of PELs in the repository & in archive directtory
    EXPECT_EQ(countPELsInRepo(), 1);
    EXPECT_EQ(count, 1);
}

// Test termination bit set for pel with critical system termination
// severity
TEST_F(ManagerTest, TestTerminateBitWithPELSevCriticalSysTerminate)
{
    const auto registry = R"(
{
    "PELs":
    [
        {
            "Name": "xyz.openbmc_project.Error.Test",
            "Subsystem": "power_supply",
            "Severity": "critical_system_term",
            "ActionFlags": ["service_action", "report"],
            "SRC":
            {
                "ReasonCode": "0x2030"
            },
            "Documentation":
            {
                "Description": "A PGOOD Fault",
                "Message": "PS had a PGOOD Fault"
            }
        }
    ]
}
)";

    auto path = getPELReadOnlyDataPath();
    fs::create_directories(path);
    path /= "message_registry.json";

    std::ofstream registryFile{path};
    registryFile << registry;
    registryFile.close();

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    std::map<std::string, std::string> additionalData{{"FOO", "BAR"}};
    std::vector<std::string> associations;

    // Create the event log to create the PEL from.
    manager.create("xyz.openbmc_project.Error.Test", 33, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);

    // Ensure a PEL was created in the repository
    auto pelData = findAnyPELInRepo();
    ASSERT_TRUE(pelData);

    auto getPELData = readPELFile(*pelData);
    PEL pel(*getPELData);

    // Spot check it.  Other testcases cover the details.
    EXPECT_TRUE(pel.valid());

    // Check for terminate bit set
    auto& hexwords = pel.primarySRC().value()->hexwordData();
    EXPECT_EQ(hexwords[3] & 0x20000000, 0x20000000);
}

TEST_F(ManagerTest, TestSanitizeFieldforDBus)
{
    std::string base{"(test0!}\n\t ~"};
    auto string = base;
    string += char{' ' - 1};
    string += char{'~' + 1};
    string += char{0};
    string += char{static_cast<char>(0xFF)};

    // convert the last four chars to spaces
    EXPECT_EQ(Manager::sanitizeFieldForDBus(string), base + "    ");
}

TEST_F(ManagerTest, TestFruPlug)
{
    const auto registry = R"(
{
    "PELs":
    [{
        "Name": "xyz.openbmc_project.Fan.Error.Fault",
        "Subsystem": "power_fans",
        "ComponentID": "0x2800",
        "SRC":
        {
            "Type": "11",
            "ReasonCode": "0x76F0",
            "Words6To9": {},
            "DeconfigFlag": true
        },
        "Callouts": [{
                "CalloutList": [
                    {"Priority": "low", "LocCode": "P0"},
                    {"Priority": "high", "LocCode": "A3"}
                ]
            }],
        "Documentation": {
            "Description": "A Fan Fault",
            "Message": "Fan had a Fault"
        }
     }]
}
)";

    auto path = getPELReadOnlyDataPath();
    fs::create_directories(path);
    path /= "message_registry.json";

    std::ofstream registryFile{path};
    registryFile << registry;
    registryFile.close();

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    MockDataInterface* mockIface =
        reinterpret_cast<MockDataInterface*>(dataIface.get());

    // Set up the mock calls used when building callouts
    EXPECT_CALL(*mockIface, getInventoryFromLocCode("P0", 0, false))
        .WillRepeatedly(Return(std::vector<std::string>{"motherboard"}));
    EXPECT_CALL(*mockIface, expandLocationCode("P0", 0))
        .WillRepeatedly(Return("U1234-P0"));
    EXPECT_CALL(*mockIface, getInventoryFromLocCode("U1234-P0", 0, true))
        .WillRepeatedly(Return(std::vector<std::string>{"motherboard"}));

    EXPECT_CALL(*mockIface, getInventoryFromLocCode("A3", 0, false))
        .WillRepeatedly(Return(std::vector<std::string>{"fan"}));
    EXPECT_CALL(*mockIface, expandLocationCode("A3", 0))
        .WillRepeatedly(Return("U1234-A3"));
    EXPECT_CALL(*mockIface, getInventoryFromLocCode("U1234-A3", 0, true))
        .WillRepeatedly(Return(std::vector<std::string>{"fan"}));

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();

    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};

    std::map<std::string, std::string> additionalData;
    std::vector<std::string> associations;

    auto checkDeconfigured = [](bool deconfigured) {
        auto pelFile = findAnyPELInRepo();
        ASSERT_TRUE(pelFile);

        auto data = readPELFile(*pelFile);
        PEL pel(*data);
        ASSERT_TRUE(pel.valid());

        EXPECT_EQ(pel.primarySRC().value()->getErrorStatusFlag(
                      SRC::ErrorStatusFlags::deconfigured),
                  deconfigured);
    };

    manager.create("xyz.openbmc_project.Fan.Error.Fault", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);
    checkDeconfigured(true);

    // Replace A3 so PEL deconfigured flag should be set to false
    mockIface->fruPresent("U1234-A3");
    checkDeconfigured(false);

    manager.erase(42);

    // Create it again and replace a FRU not in the callout list.
    // Deconfig flag should stay on.
    manager.create("xyz.openbmc_project.Fan.Error.Fault", 43, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);
    checkDeconfigured(true);
    mockIface->fruPresent("U1234-A4");
    checkDeconfigured(true);
}

std::pair<int, std::filesystem::path> createHWIsolatedCalloutFile()
{
    json jsonCalloutDataList(nlohmann::json::value_t::array);
    json jsonDimmCallout;

    jsonDimmCallout["LocationCode"] = "Ufcs-DIMM0";
    jsonDimmCallout["EntityPath"] = {35, 1, 0, 2, 0, 3, 0, 0, 0, 0, 0,
                                     0,  0, 0, 0, 0, 0, 0, 0, 0, 0};
    jsonDimmCallout["GuardType"] = "GARD_Predictive";
    jsonDimmCallout["Deconfigured"] = false;
    jsonDimmCallout["Guarded"] = true;
    jsonDimmCallout["Priority"] = "M";
    jsonCalloutDataList.emplace_back(std::move(jsonDimmCallout));

    std::string calloutData(jsonCalloutDataList.dump());
    std::string calloutFile("/tmp/phalPELCalloutsJson.XXXXXX");
    int fileFD = -1;

    fileFD = mkostemp(calloutFile.data(), O_RDWR);
    if (fileFD == -1)
    {
        perror("Failed to create PELCallouts file");
        return {-1, {}};
    }

    ssize_t rc = write(fileFD, calloutData.c_str(), calloutData.size());
    if (rc == -1)
    {
        perror("Failed to write PELCallouts file");
        close(fileFD);
        return {-1, {}};
    }

    // Ensure we seek to the beginning of the file
    rc = lseek(fileFD, 0, SEEK_SET);
    if (rc == -1)
    {
        perror("Failed to set SEEK_SET for PELCallouts file");
        close(fileFD);
        return {-1, {}};
    }
    return {fileFD, calloutFile};
}

void appendFFDCEntry(int fd, uint8_t subTypeJson, uint8_t version,
                     phosphor::logging::FFDCEntries& ffdcEntries)
{
    phosphor::logging::FFDCEntry ffdcEntry =
        std::make_tuple(sdbusplus::xyz::openbmc_project::Logging::server::
                            Create::FFDCFormat::JSON,
                        subTypeJson, version, fd);
    ffdcEntries.push_back(ffdcEntry);
}

TEST_F(ManagerTest, TestPELDeleteWithoutHWIsolation)
{
    const auto registry = R"(
    {
        "PELs":
        [{
            "Name": "xyz.openbmc_project.Error.Test",
            "SRC":
            {
                "ReasonCode": "0x2030"
            },
            "Documentation": {
                "Description": "Test Error",
                "Message": "Test Error"
            }
        }]
    }
    )";

    auto path = getPELReadOnlyDataPath();
    fs::create_directories(path);
    path /= "message_registry.json";

    std::ofstream registryFile{path};
    registryFile << registry;
    registryFile.close();

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    MockDataInterface* mockIface =
        reinterpret_cast<MockDataInterface*>(dataIface.get());

    EXPECT_CALL(*mockIface, getInventoryFromLocCode("Ufcs-DIMM0", 0, false))
        .WillOnce(Return(std::vector<std::string>{
            "/xyz/openbmc_project/inventory/system/chassis/motherboard/dimm0"}));

    // Mock the scenario where the hardware isolation guard is flagged
    // but is not associated, resulting in an empty list being returned.
    EXPECT_CALL(
        *mockIface,
        getAssociatedPaths(
            ::testing::StrEq(
                "/xyz/openbmc_project/logging/entry/42/isolated_hw_entry"),
            ::testing::StrEq("/"), 0,
            ::testing::ElementsAre(
                "xyz.openbmc_project.HardwareIsolation.Entry")))
        .WillRepeatedly(Return(std::vector<std::string>{}));

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();
    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};
    std::map<std::string, std::string> additionalData;
    std::vector<std::string> associations;

    // Check when there's no PEL with given id.
    {
        EXPECT_FALSE(manager.isDeleteProhibited(42));
    }
    // creating without ffdcEntries
    manager.create("xyz.openbmc_project.Error.Test", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations);
    auto pelFile = findAnyPELInRepo();
    auto data = readPELFile(*pelFile);
    PEL pel_unguarded(*data);
    {
        // Verify that the guard flag is false.
        EXPECT_FALSE(pel_unguarded.getGuardFlag());
        // Check that `isDeleteProhibited` returns false when the guard flag
        // is false.
        EXPECT_FALSE(manager.isDeleteProhibited(42));
    }
    manager.erase(42);
    EXPECT_FALSE(findAnyPELInRepo());

    auto [fd, calloutFile] = createHWIsolatedCalloutFile();
    ASSERT_NE(fd, -1);
    uint8_t subTypeJson = 0xCA;
    uint8_t version = 0x01;
    phosphor::logging::FFDCEntries ffdcEntries;
    appendFFDCEntry(fd, subTypeJson, version, ffdcEntries);
    manager.create("xyz.openbmc_project.Error.Test", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations, ffdcEntries);
    close(fd);
    std::filesystem::remove(calloutFile);

    auto pelPathInRepo = findAnyPELInRepo();
    auto unguardedData = readPELFile(*pelPathInRepo);
    PEL pel(*unguardedData);
    {
        // Verify guard flag set to true
        EXPECT_TRUE(pel.getGuardFlag());
        // Check even if guard flag is true, if dbus call returns empty
        // array list then `isDeleteProhibited` returns false
        EXPECT_FALSE(manager.isDeleteProhibited(42));
    }
    manager.erase(42);
}

TEST_F(ManagerTest, TestPELDeleteWithHWIsolation)
{
    const auto registry = R"(
    {
        "PELs":
        [{
            "Name": "xyz.openbmc_project.Error.Test",
            "Severity": "critical_system_term",
            "SRC":
            {
                "ReasonCode": "0x2030"
            },
            "Documentation": {
                "Description": "Test Error",
                "Message": "Test Error"
            }
        }]
    }
    )";

    auto path = getPELReadOnlyDataPath();
    fs::create_directories(path);
    path /= "message_registry.json";

    std::ofstream registryFile{path};
    registryFile << registry;
    registryFile.close();

    std::unique_ptr<DataInterfaceBase> dataIface =
        std::make_unique<MockDataInterface>();

    MockDataInterface* mockIface =
        reinterpret_cast<MockDataInterface*>(dataIface.get());

    EXPECT_CALL(*mockIface, getInventoryFromLocCode("Ufcs-DIMM0", 0, false))
        .WillOnce(Return(std::vector<std::string>{
            "/xyz/openbmc_project/inventory/system/chassis/motherboard/dimm0"}));

    EXPECT_CALL(
        *mockIface,
        getAssociatedPaths(
            ::testing::StrEq(
                "/xyz/openbmc_project/logging/entry/42/isolated_hw_entry"),
            ::testing::StrEq("/"), 0,
            ::testing::ElementsAre(
                "xyz.openbmc_project.HardwareIsolation.Entry")))
        .WillRepeatedly(Return(std::vector<std::string>{
            "/xyz/openbmc_project/hardware_isolation/entry/1"}));

    std::unique_ptr<JournalBase> journal = std::make_unique<MockJournal>();
    openpower::pels::Manager manager{
        logManager, std::move(dataIface),
        std::bind(std::mem_fn(&TestLogger::log), &logger, std::placeholders::_1,
                  std::placeholders::_2, std::placeholders::_3),
        std::move(journal)};
    std::map<std::string, std::string> additionalData;
    std::vector<std::string> associations;

    auto [fd, calloutFile] = createHWIsolatedCalloutFile();
    ASSERT_NE(fd, -1);
    uint8_t subTypeJson = 0xCA;
    uint8_t version = 0x01;
    phosphor::logging::FFDCEntries ffdcEntries;
    appendFFDCEntry(fd, subTypeJson, version, ffdcEntries);
    manager.create("xyz.openbmc_project.Error.Test", 42, 0,
                   phosphor::logging::Entry::Level::Error, additionalData,
                   associations, ffdcEntries);
    close(fd);
    std::filesystem::remove(calloutFile);

    auto pelFile = findAnyPELInRepo();
    EXPECT_TRUE(pelFile);
    auto data = readPELFile(*pelFile);
    PEL pel(*data);
    EXPECT_TRUE(pel.valid());
    // Test case where the guard flag is set to true and the hardware
    // isolation guard is associated, which should result in
    // `isDeleteProhibited` returning true as expected.
    EXPECT_TRUE(pel.getGuardFlag());
    EXPECT_TRUE(manager.isDeleteProhibited(42));
    manager.erase(42);
}