Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 1 | { |
| 2 | "PELs": |
| 3 | [ |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 4 | { |
| 5 | "Name": "xyz.openbmc_project.Common.Error.Timeout", |
| 6 | "Subsystem": "bmc_firmware", |
Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 7 | |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 8 | "SRC": |
| 9 | { |
| 10 | "ReasonCode": "0x1001", |
| 11 | "Words6To9": |
| 12 | { |
| 13 | "6": |
| 14 | { |
| 15 | "Description": "Timeout in ms", |
| 16 | "AdditionalDataPropSource": "TIMEOUT_IN_MSEC" |
| 17 | } |
| 18 | } |
| 19 | }, |
| 20 | |
| 21 | "Documentation": |
| 22 | { |
| 23 | "Description": "This is a generic timeout error", |
| 24 | "Message": "An operation timed out", |
| 25 | "Notes": [ |
| 26 | "The journal should contain more information" |
| 27 | ] |
| 28 | } |
| 29 | }, |
| 30 | |
| 31 | { |
| 32 | "Name": "xyz.openbmc_project.Common.Error.InternalFailure", |
| 33 | "Subsystem": "bmc_firmware", |
| 34 | |
| 35 | "SRC": |
| 36 | { |
| 37 | "ReasonCode": "0x1002", |
| 38 | "Words6To9": |
| 39 | { |
| 40 | } |
| 41 | }, |
| 42 | |
| 43 | "Documentation": |
| 44 | { |
| 45 | "Description": "BMC code had a generic internal failure", |
| 46 | "Message": "An application had an internal failure", |
| 47 | "Notes": [ |
| 48 | "The journal should contain more information" |
| 49 | ] |
| 50 | } |
| 51 | }, |
| 52 | |
| 53 | { |
| 54 | "Name": "xyz.openbmc_project.Common.Error.InvalidArgument", |
| 55 | "Subsystem": "user_error", |
| 56 | |
| 57 | "SRC": |
| 58 | { |
| 59 | "ReasonCode": "0x1003", |
| 60 | "Words6To9": |
| 61 | { |
| 62 | } |
| 63 | }, |
| 64 | |
| 65 | "Documentation": |
| 66 | { |
| 67 | "Description": "BMC code was given an invalid argument", |
| 68 | "Message": "Code was given an invalid argument", |
| 69 | "Notes": [ |
| 70 | "The journal should contain more information" |
| 71 | ] |
| 72 | } |
| 73 | }, |
| 74 | { |
| 75 | "Name": "xyz.openbmc_project.Common.Error.InsufficientPermission", |
| 76 | "Subsystem": "user_error", |
| 77 | |
| 78 | "SRC": |
| 79 | { |
| 80 | "ReasonCode": "0x1004", |
| 81 | "Words6To9": |
| 82 | { |
| 83 | } |
| 84 | }, |
| 85 | |
| 86 | "Documentation": |
| 87 | { |
| 88 | "Description": "An operation failed due to insufficient permission", |
| 89 | "Message": "An operation failed due to unsufficient permission", |
| 90 | "Notes": [ |
| 91 | "The journal should contain more information" |
| 92 | ] |
| 93 | } |
| 94 | }, |
| 95 | |
| 96 | { |
| 97 | "Name": "xyz.openbmc_project.Common.Error.NotAllowed", |
| 98 | "Subsystem": "user_error", |
| 99 | |
| 100 | "SRC": |
| 101 | { |
| 102 | "ReasonCode": "0x1005", |
| 103 | "Words6To9": |
| 104 | { |
| 105 | } |
| 106 | }, |
| 107 | |
| 108 | "Documentation": |
| 109 | { |
| 110 | "Description": "An operation failed because it isn't allowed", |
Matt Spinler | 2695876 | 2020-08-27 13:21:23 -0500 | [diff] [blame] | 111 | "Message": "An operation failed because it isn't allowed", |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 112 | "Notes": [ |
| 113 | "The journal should contain more information" |
| 114 | ] |
| 115 | } |
| 116 | }, |
| 117 | |
| 118 | { |
| 119 | "Name": "xyz.openbmc_project.Common.Error.NoCACertificate", |
| 120 | "Subsystem": "user_error", |
| 121 | |
| 122 | "SRC": |
| 123 | { |
| 124 | "ReasonCode": "0x1006", |
| 125 | "Words6To9": |
| 126 | { |
| 127 | } |
| 128 | }, |
| 129 | |
| 130 | "Documentation": |
| 131 | { |
| 132 | "Description": "The server's CA certificate has not been provided", |
| 133 | "Message": "The server's CA certificate has not been provided" |
| 134 | } |
Matt Spinler | 05c2c6c | 2019-12-18 14:02:09 -0600 | [diff] [blame] | 135 | }, |
| 136 | |
| 137 | { |
Matt Spinler | af036b1 | 2020-06-25 10:53:52 -0500 | [diff] [blame] | 138 | "Name": "xyz.openbmc_project.Sensor.Device.Error.ReadFailure", |
| 139 | "Subsystem": "cec_chip_iface", |
| 140 | |
| 141 | "SRC": |
| 142 | { |
| 143 | "ReasonCode": "0x1007", |
| 144 | "Words6To9": |
| 145 | { |
| 146 | "6": |
| 147 | { |
| 148 | "Description": "errno of the failure", |
| 149 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 150 | } |
| 151 | } |
| 152 | }, |
| 153 | |
| 154 | "Documentation": |
| 155 | { |
| 156 | "Description": "Sensor device read failure", |
| 157 | "Message": "There was a failure when reading a sensor device", |
| 158 | "Notes": [ |
| 159 | "The severity is set by the creator.", |
| 160 | "The action flags are set automatically by the code.", |
| 161 | "Callouts added based on CALLOUT_DEVICE_PATH." |
| 162 | ] |
| 163 | } |
| 164 | }, |
| 165 | |
| 166 | { |
| 167 | "Name": "xyz.openbmc_project.Common.Device.Error.ReadFailure", |
| 168 | "Subsystem": "cec_chip_iface", |
| 169 | |
| 170 | "SRC": |
| 171 | { |
| 172 | "ReasonCode": "0x1008", |
| 173 | "Words6To9": |
| 174 | { |
| 175 | "6": |
| 176 | { |
| 177 | "Description": "errno of the failure", |
| 178 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 179 | } |
| 180 | } |
| 181 | }, |
| 182 | |
| 183 | "Documentation": |
| 184 | { |
| 185 | "Description": "Device read failure", |
| 186 | "Message": "There was a failure when reading a hardware device", |
| 187 | "Notes": [ |
| 188 | "The severity is set by the creator.", |
| 189 | "The action flags are set automatically by the code.", |
| 190 | "Callouts added based on CALLOUT_DEVICE_PATH." |
| 191 | ] |
| 192 | } |
| 193 | }, |
| 194 | |
| 195 | { |
| 196 | "Name": "xyz.openbmc_project.Control.Device.Error.WriteFailure", |
| 197 | "Subsystem": "cec_chip_iface", |
| 198 | |
| 199 | "SRC": |
| 200 | { |
| 201 | "ReasonCode": "0x1009", |
| 202 | "Words6To9": |
| 203 | { |
| 204 | "6": |
| 205 | { |
| 206 | "Description": "errno of the failure", |
| 207 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 208 | } |
| 209 | } |
| 210 | }, |
| 211 | |
| 212 | "Documentation": |
| 213 | { |
| 214 | "Description": "Device write failure", |
| 215 | "Message": "There was a failure when writing to a hardware device", |
| 216 | "Notes": [ |
| 217 | "The severity is set by the creator.", |
| 218 | "The action flags are set automatically by the code.", |
| 219 | "Callouts added based on CALLOUT_DEVICE_PATH" |
| 220 | ] |
| 221 | } |
| 222 | }, |
| 223 | |
| 224 | { |
| 225 | "Name": "xyz.openbmc_project.Common.Device.Error.WriteFailure", |
| 226 | "Subsystem": "cec_chip_iface", |
| 227 | |
| 228 | "SRC": |
| 229 | { |
| 230 | "ReasonCode": "0x100A", |
| 231 | "Words6To9": |
| 232 | { |
| 233 | "6": |
| 234 | { |
| 235 | "Description": "errno of the failure", |
| 236 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 237 | } |
| 238 | } |
| 239 | }, |
| 240 | |
| 241 | "Documentation": |
| 242 | { |
| 243 | "Description": "Device write failure", |
| 244 | "Message": "There was a failure when writing to a hardware device", |
| 245 | "Notes": [ |
| 246 | "The severity is set by the creator.", |
| 247 | "The action flags are set automatically by the code.", |
| 248 | "Callouts added based on CALLOUT_DEVICE_PATH" |
| 249 | ] |
| 250 | } |
| 251 | }, |
Jayanth Othayoth | bd0a752 | 2021-05-03 02:05:36 -0500 | [diff] [blame] | 252 | |
Matt Spinler | af036b1 | 2020-06-25 10:53:52 -0500 | [diff] [blame] | 253 | { |
Matt Spinler | 05c2c6c | 2019-12-18 14:02:09 -0600 | [diff] [blame] | 254 | "Name": "org.open_power.Logging.Error.SentBadPELToHost", |
| 255 | "Subsystem": "bmc_firmware", |
| 256 | "Severity": "non_error", |
| 257 | |
| 258 | "SRC": |
| 259 | { |
| 260 | "ReasonCode": "0x2001", |
| 261 | "Words6To9": |
| 262 | { |
| 263 | "6": |
| 264 | { |
| 265 | "Description": "The bad PEL ID", |
| 266 | "AdditionalDataPropSource": "BAD_ID" |
| 267 | } |
| 268 | } |
| 269 | }, |
| 270 | |
| 271 | "Documentation": |
| 272 | { |
| 273 | "Description": "The BMC sent the host a malformed PEL", |
| 274 | "Message": "The BMC sent the host a malformed PEL", |
| 275 | "Notes": [ |
| 276 | "The host firmware rejected that PEL." |
| 277 | ] |
| 278 | } |
Matt Spinler | e95fd01 | 2020-01-07 12:53:16 -0600 | [diff] [blame] | 279 | }, |
| 280 | |
| 281 | { |
| 282 | "Name": "org.open_power.Logging.Error.BadHostPEL", |
| 283 | "Subsystem": "platform_firmware", |
| 284 | "Severity": "unrecoverable", |
| 285 | |
| 286 | "SRC": |
| 287 | { |
| 288 | "ReasonCode": "0x2002", |
| 289 | "Words6To9": |
| 290 | { |
| 291 | "6": |
| 292 | { |
| 293 | "Description": "The PLID of the invalid PEL", |
| 294 | "AdditionalDataPropSource": "PLID" |
| 295 | }, |
| 296 | "7": |
| 297 | { |
| 298 | "Description": "The corresponding OpenBMC event log ID", |
| 299 | "AdditionalDataPropSource": "OBMC_LOG_ID" |
| 300 | }, |
| 301 | "8": |
| 302 | { |
| 303 | "Description": "The size of the invalid PEL", |
| 304 | "AdditionalDataPropSource": "PEL_SIZE" |
| 305 | } |
| 306 | } |
| 307 | }, |
| 308 | |
| 309 | "Documentation": |
| 310 | { |
| 311 | "Description": "The host sent the BMC an invalid PEL", |
| 312 | "Message": "The host sent the BMC an invalid PEL", |
| 313 | "Notes": [ |
| 314 | ] |
| 315 | } |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 316 | }, |
| 317 | |
| 318 | { |
Matt Spinler | 3477ce9 | 2020-07-08 14:49:25 -0500 | [diff] [blame] | 319 | "Name": "org.open_power.Logging.Error.TestError1", |
| 320 | "Subsystem": "platform_firmware", |
| 321 | "Severity": "unrecoverable", |
| 322 | |
| 323 | "SRC": |
| 324 | { |
| 325 | "ReasonCode": "0x2003", |
| 326 | "Words6To9": |
| 327 | { |
| 328 | } |
| 329 | }, |
| 330 | |
| 331 | "Callouts": [ |
| 332 | { |
| 333 | "CalloutList": [ |
| 334 | {"Priority": "high", "Procedure": "bmc_code"}, |
| 335 | {"Priority": "medium", "SymbolicFRU": "service_docs"} |
| 336 | ] |
| 337 | } |
| 338 | ], |
| 339 | |
| 340 | "Documentation": |
| 341 | { |
| 342 | "Description": "An error for testing", |
| 343 | "Message": "This is a test error" |
| 344 | } |
| 345 | }, |
| 346 | |
| 347 | { |
Matt Spinler | 30ddc9f | 2020-07-16 15:39:59 -0500 | [diff] [blame] | 348 | "Name": "xyz.openbmc_project.Logging.Error.Default", |
| 349 | "Subsystem": "other_na", |
| 350 | |
| 351 | "SRC": |
| 352 | { |
| 353 | "ReasonCode": "0x2004", |
| 354 | "Words6To9": |
| 355 | { |
| 356 | } |
| 357 | }, |
| 358 | |
| 359 | "Documentation": |
| 360 | { |
| 361 | "Description": "This entry is used when no other matching entry is found", |
| 362 | "Message": "Unknown (Original event not in message registry)", |
| 363 | "Notes": [ |
| 364 | "This is used when the actual error name isn't found in ", |
| 365 | "the registry. The original error name will be stored ", |
| 366 | "in the UserData section that contains the AdditionalData ", |
| 367 | "properties using the key ERROR_NAME.", |
| 368 | "This error may contain callouts if the creator passed ", |
| 369 | "them in.", |
| 370 | "The severity is set by the creator.", |
| 371 | "If this error is seen, then a code change needs to be ", |
| 372 | "made to add the missing error entry to this registry." |
| 373 | ] |
| 374 | } |
| 375 | }, |
| 376 | |
| 377 | { |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 378 | "Name": "org.open_power.PHAL.Error.Boot", |
| 379 | "Subsystem": "cec_hardware", |
Ramesh Iyyar | 41e79dc | 2020-12-22 06:27:48 -0600 | [diff] [blame] | 380 | "ComponentID": "0x3000", |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 381 | "Severity": "unrecoverable", |
| 382 | |
| 383 | "SRC": |
| 384 | { |
Ramesh Iyyar | 41e79dc | 2020-12-22 06:27:48 -0600 | [diff] [blame] | 385 | "ReasonCode": "0x3001", |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 386 | "Words6To9": |
| 387 | { |
| 388 | } |
| 389 | }, |
| 390 | |
| 391 | "Documentation": |
| 392 | { |
| 393 | "Description": "Failure occured during boot process", |
| 394 | "Message": "Failure occured during boot process", |
| 395 | "Notes": [ |
| 396 | "Debug traces will be captured in AdditionalData section" |
| 397 | ] |
| 398 | } |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 399 | }, |
| 400 | |
| 401 | { |
Ramesh Iyyar | 78be2a2 | 2020-12-22 06:22:55 -0600 | [diff] [blame] | 402 | "Name": "org.open_power.PHAL.Error.PrePowerOff", |
| 403 | "Subsystem": "cec_hardware", |
| 404 | "ComponentID": "0x3000", |
| 405 | |
| 406 | "SRC": |
| 407 | { |
| 408 | "ReasonCode": "0x3002", |
| 409 | "Words6To9": |
| 410 | { |
| 411 | } |
| 412 | }, |
| 413 | |
| 414 | "Documentation": |
| 415 | { |
| 416 | "Description": "Failure occurred during PHAL pre-poweroff operations", |
| 417 | "Message": "Failure occurred during PHAL pre-poweroff operations", |
| 418 | "Notes": [ |
| 419 | "Severity needs to be set based on needs for this registry.", |
| 420 | "FFDC (First Failure Data Collection) will be collected ", |
| 421 | "and added into PEL." |
| 422 | ] |
| 423 | } |
| 424 | }, |
| 425 | |
| 426 | { |
Jayanth Othayoth | db00d76 | 2021-07-13 02:48:19 -0500 | [diff] [blame] | 427 | "Name": "org.open_power.PHAL.Error.devtreeSync", |
| 428 | "Subsystem": "cec_hardware", |
| 429 | "ComponentID": "0x3000", |
| 430 | "Severity": "unrecoverable", |
| 431 | |
| 432 | "SRC": |
| 433 | { |
| 434 | "ReasonCode": "0x3003", |
| 435 | "Words6To9": |
| 436 | { |
| 437 | } |
| 438 | }, |
| 439 | |
| 440 | "Documentation": |
| 441 | { |
| 442 | "Description": "Failure occurred during PHAL devtree sync ", |
| 443 | "Message": "Failure occurred during PHAL devtree sync", |
| 444 | "Notes": [ |
| 445 | "The journal should contain more information" |
| 446 | ] |
| 447 | } |
| 448 | }, |
| 449 | |
| 450 | { |
Jayanth Othayoth | f3e619a | 2021-07-13 03:58:06 -0500 | [diff] [blame] | 451 | "Name": "org.open_power.PHAL.Error.devtreeBackup", |
| 452 | "Subsystem": "cec_hardware", |
| 453 | "ComponentID": "0x3000", |
| 454 | "Severity": "unrecoverable", |
| 455 | |
| 456 | "SRC": |
| 457 | { |
| 458 | "ReasonCode": "0x3004", |
| 459 | "Words6To9": |
| 460 | { |
| 461 | } |
| 462 | }, |
| 463 | |
| 464 | "Documentation": |
| 465 | { |
| 466 | "Description": "Failure occurred during PHAL devtree backup ", |
| 467 | "Message": "Failure occurred during PHAL devtree backup", |
| 468 | "Notes": [ |
| 469 | "The journal should contain more information" |
| 470 | ] |
| 471 | } |
| 472 | }, |
| 473 | |
| 474 | { |
Andrew Geissler | d54fd73 | 2021-07-20 14:07:12 -0400 | [diff] [blame] | 475 | "Name": "org.open_power.PHAL.Error.HostRunning", |
| 476 | "Subsystem": "cec_sp_hostboot_iface", |
| 477 | "ComponentID": "0x3000", |
| 478 | |
| 479 | "SRC": |
| 480 | { |
| 481 | "ReasonCode": "0x3005", |
| 482 | "Words6To9": |
| 483 | { |
| 484 | } |
| 485 | }, |
| 486 | |
| 487 | "Documentation": |
| 488 | { |
| 489 | "Description": "Host did not respond to BMC after a BMC reset", |
| 490 | "Message": "Host did not respond to BMC after a BMC reset but hardware indicates it is running", |
| 491 | "Notes": [ |
| 492 | "System will be left in its current state to ensure host ", |
| 493 | "is not unexpectedly taken down. There is most likely an ", |
| 494 | "issue in the software or hardware communication path ", |
| 495 | "between the BMC and the Host firmware.", |
| 496 | "A BMC dump will be collected with relevant FFDC." |
| 497 | ] |
| 498 | } |
| 499 | }, |
| 500 | |
| 501 | { |
Andrew Geissler | 8034dde | 2021-09-10 14:43:03 -0500 | [diff] [blame] | 502 | "Name": "xyz.openbmc_project.State.Error.HostNotRunning", |
| 503 | "Subsystem": "cec_sp_hostboot_iface", |
| 504 | "ComponentID": "0x3400", |
| 505 | "SRC": |
| 506 | { |
| 507 | "ReasonCode": "0x3401", |
| 508 | "Words6To9": |
| 509 | { |
| 510 | } |
| 511 | }, |
| 512 | "Documentation": |
| 513 | { |
| 514 | "Description": "Host was booting or booted before BMC reset but is now unresponsive", |
| 515 | "Message": "Host did not respond to BMC after a BMC reset but it was booting or booted prior to the BMC reboot", |
| 516 | "Notes": [ |
| 517 | "System will follow recovery policy, resulting in this ", |
| 518 | "error and most likely a a reboot of the host. The issue ", |
| 519 | "is most likely the result of the BMC rebooting while the ", |
| 520 | "host was booting and in a state where it still needed ", |
| 521 | "the BMC to complete its boot." |
| 522 | ] |
| 523 | } |
| 524 | }, |
| 525 | |
| 526 | { |
Jayanth Othayoth | bd0a752 | 2021-05-03 02:05:36 -0500 | [diff] [blame] | 527 | "Name": "org.open_power.Processor.Error.SbeChipOpFailure", |
| 528 | "Subsystem": "processor_chip", |
| 529 | "ComponentID": "0x3500", |
| 530 | |
| 531 | "SRC": |
| 532 | { |
| 533 | "ReasonCode": "0x3500", |
| 534 | "Words6To9": |
| 535 | { |
| 536 | "6": |
| 537 | { |
| 538 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 539 | "AdditionalDataPropSource": "SRC6" |
| 540 | } |
| 541 | } |
| 542 | }, |
| 543 | |
| 544 | "Documentation": |
| 545 | { |
| 546 | "Description": "chipop failure with SBE provided FFDC", |
| 547 | "Message": "chipop request failure reported by SBE", |
| 548 | "Notes": [ |
| 549 | "The severity is set by the creator.", |
| 550 | "Callouts added based on SBE provided FFDC.", |
| 551 | "SBE provided additional debug data included as part of the", |
| 552 | "additional user data section." |
| 553 | ] |
| 554 | } |
| 555 | }, |
| 556 | |
| 557 | { |
Jayanth Othayoth | 4f6b763 | 2021-05-03 02:36:18 -0500 | [diff] [blame] | 558 | "Name": "org.open_power.Processor.Error.SbeChipOpTimeout", |
| 559 | "Subsystem": "processor_chip", |
| 560 | "ComponentID": "0x3500", |
| 561 | |
| 562 | "SRC": |
| 563 | { |
| 564 | "ReasonCode": "0x3501", |
| 565 | "Words6To9": |
| 566 | { |
| 567 | "6": |
| 568 | { |
| 569 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 570 | "AdditionalDataPropSource": "SRC6" |
| 571 | } |
| 572 | } |
| 573 | }, |
| 574 | |
| 575 | "Documentation": |
| 576 | { |
| 577 | "Description": "SBE chipop timeout", |
| 578 | "Message": "chipop timeout reported during SBE communication", |
| 579 | "Notes": [ |
| 580 | "The severity is set by the creator.", |
| 581 | "Check SBE Dump associated to this error to debug the failure." |
| 582 | ] |
| 583 | } |
| 584 | }, |
| 585 | |
| 586 | { |
Jayanth Othayoth | 6c60183 | 2021-05-03 02:56:04 -0500 | [diff] [blame] | 587 | "Name": "org.open_power.Processor.Error.SbeChipOpInvalidState", |
| 588 | "Subsystem": "processor_chip", |
| 589 | "ComponentID": "0x3500", |
| 590 | |
| 591 | "SRC": |
| 592 | { |
| 593 | "ReasonCode": "0x3502", |
| 594 | "Words6To9": |
| 595 | { |
| 596 | "6": |
| 597 | { |
| 598 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 599 | "AdditionalDataPropSource": "SRC6" |
| 600 | }, |
| 601 | "7": |
| 602 | { |
| 603 | "Description": "Value of SBE state", |
| 604 | "AdditionalDataPropSource": "SRC7" |
| 605 | } |
| 606 | } |
| 607 | }, |
| 608 | |
| 609 | "Documentation": |
| 610 | { |
| 611 | "Description": "The SBE on this processor is not in a state where chipOps can be issued", |
| 612 | "Message": "SBE Chipop is not allowed due to invalid SBE state ", |
| 613 | "Notes": [ |
| 614 | "The severity is set by the creator." |
| 615 | ] |
| 616 | } |
| 617 | }, |
| 618 | |
| 619 | { |
Jayanth Othayoth | abc88b0 | 2021-09-19 06:07:22 -0500 | [diff] [blame] | 620 | "Name": "org.open_power.Processor.Error.SbeBootFailure", |
| 621 | "Subsystem": "processor_chip", |
| 622 | "ComponentID": "0x3500", |
| 623 | |
| 624 | "SRC": |
| 625 | { |
| 626 | "ReasonCode": "0x3503", |
| 627 | "Words6To9": |
| 628 | { |
| 629 | "6": |
| 630 | { |
| 631 | "Description": "[0:15] chip position", |
| 632 | "AdditionalDataPropSource": "SRC6" |
| 633 | } |
| 634 | } |
| 635 | }, |
| 636 | |
| 637 | "Documentation": |
| 638 | { |
| 639 | "Description": "Boot failure with SBE provided FFDC", |
| 640 | "Message": "Boot failure reported by SBE", |
| 641 | "Notes": [ |
| 642 | "The severity is set by the creator.", |
| 643 | "Callouts added based on SBE provided FFDC.", |
| 644 | "SBE provided additional debug data included as part of the", |
| 645 | "additional user data section." |
| 646 | ] |
| 647 | } |
| 648 | }, |
| 649 | |
| 650 | { |
Jayanth Othayoth | fd0cf4f | 2021-09-19 06:16:54 -0500 | [diff] [blame] | 651 | "Name": "org.open_power.Processor.Error.SbeBootTimeout", |
| 652 | "Subsystem": "processor_chip", |
| 653 | "ComponentID": "0x3500", |
| 654 | |
| 655 | "SRC": |
| 656 | { |
| 657 | "ReasonCode": "0x3504", |
| 658 | "Words6To9": |
| 659 | { |
| 660 | } |
| 661 | }, |
| 662 | |
| 663 | "Documentation": |
| 664 | { |
| 665 | "Description": "SBE Boot timeout", |
| 666 | "Message": "timeout reported during SBE boot process", |
| 667 | "Notes": [ |
| 668 | "The severity is set by the creator.", |
| 669 | "Check SBE Dump associated to this error to debug the failure." |
| 670 | ] |
| 671 | } |
| 672 | }, |
| 673 | |
| 674 | { |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 675 | "Name": "org.open_power.Attn.Error.Terminate", |
Ben Tyner | 808e29f | 2021-04-16 08:32:23 -0500 | [diff] [blame] | 676 | "Subsystem": "cec_hardware", |
| 677 | "Severity": "non_error", |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 678 | |
| 679 | "SRC": |
| 680 | { |
| 681 | "ReasonCode": "0xD138", |
Ben Tyner | 808e29f | 2021-04-16 08:32:23 -0500 | [diff] [blame] | 682 | "SymptomIDFields": [ "SRCWord3", "SRCWord4", "SRCWord5", "SRCWord6", "SRCWord7", "SRCWord8", "SRCWord9" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 683 | "Words6To9": |
| 684 | { |
| 685 | } |
| 686 | }, |
| 687 | |
| 688 | "Documentation": |
| 689 | { |
| 690 | "Description": "Status shows TI special attention active", |
| 691 | "Message": "TI special attention detected", |
| 692 | "Notes": [ |
| 693 | "This entry is for any TI special attention event ", |
| 694 | "reported by the attention handler component" |
| 695 | ] |
| 696 | } |
| 697 | }, |
| 698 | |
| 699 | { |
| 700 | "Name": "org.open_power.Attn.Error.Fail", |
| 701 | "Subsystem": "bmc_firmware", |
| 702 | "Severity": "unrecoverable_loss_of_function", |
| 703 | |
| 704 | "SRC": |
| 705 | { |
| 706 | "ReasonCode": "0xD13E", |
| 707 | "Words6To9": |
| 708 | { |
| 709 | "6": |
| 710 | { |
| 711 | "Description": "Error code from attention handler", |
| 712 | "AdditionalDataPropSource": "ERROR_CODE" |
| 713 | } |
| 714 | } |
| 715 | }, |
| 716 | "Documentation": |
| 717 | { |
| 718 | "Description": "The attention handler encountered an error", |
| 719 | "MessageArgSources" : ["SRCWord6"], |
| 720 | "Message": "Attention handler error %1", |
| 721 | "Notes": [ |
| 722 | "Attention handler will provide error code" |
| 723 | ] |
| 724 | } |
| 725 | }, |
| 726 | |
| 727 | { |
| 728 | "Name": "org.open_power.Attn.Error.Vital", |
| 729 | "Subsystem": "processor_chip", |
| 730 | "Severity": "critical", |
| 731 | |
| 732 | "SRC": |
| 733 | { |
| 734 | "ReasonCode": "0xD16D", |
| 735 | "Words6To9": |
| 736 | { |
| 737 | } |
| 738 | }, |
| 739 | |
| 740 | "Documentation": |
| 741 | { |
| 742 | "Description": "Status shows SBE vital attention active", |
| 743 | "Message": "SBE vital attention detected", |
| 744 | "Notes": [ |
| 745 | "This entry is for any SBE vital attention event ", |
| 746 | "reported by the attention handler component" |
| 747 | ] |
| 748 | } |
| 749 | }, |
| 750 | |
| 751 | { |
| 752 | "Name": "org.open_power.HwDiags.Error.Checkstop", |
| 753 | "Subsystem": "cec_hardware", |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 754 | "ActionFlags": [ "service_action", "report", "call_home" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 755 | |
| 756 | "SRC": |
| 757 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 758 | "ReasonCode": "0xE510", |
| 759 | "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 760 | "Words6To9": |
| 761 | { |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 762 | } |
| 763 | }, |
| 764 | |
| 765 | "Documentation": |
| 766 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 767 | "Description": "A system checkstop attention has occurred", |
| 768 | "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
| 769 | "Message": "hw-diags signature: %1 %2 %3" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 770 | } |
| 771 | }, |
| 772 | |
| 773 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 774 | "Name": "org.open_power.HwDiags.Error.Predictive", |
| 775 | "Subsystem": "cec_hardware", |
| 776 | "ActionFlags": [ "service_action", "report", "call_home" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 777 | |
| 778 | "SRC": |
| 779 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 780 | "ReasonCode": "0xE511", |
| 781 | "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 782 | "Words6To9": |
| 783 | { |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 784 | } |
| 785 | }, |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 786 | |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 787 | "Documentation": |
| 788 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 789 | "Description": "A hardware attention requiring service has occurred", |
| 790 | "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
| 791 | "Message": "hw-diags signature: %1 %2 %3" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 792 | } |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 793 | }, |
| 794 | |
| 795 | { |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 796 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.InputFault", |
| 797 | "Subsystem": "power_supply", |
| 798 | "Severity": "unrecoverable_redundancy_loss", |
| 799 | "ActionFlags": ["service_action", "report"], |
| 800 | "ComponentID": "0x2700", |
| 801 | |
| 802 | "SRC": { |
| 803 | "Type": "11", |
| 804 | "ReasonCode": "0x15F0", |
| 805 | "Words6To9": {} |
| 806 | }, |
| 807 | |
| 808 | "Callouts": [ |
| 809 | { |
| 810 | "CalloutList": [ |
| 811 | { "Priority": "high", "SymbolicFRU": "pwrsply" } |
| 812 | ] |
| 813 | } |
| 814 | ], |
| 815 | |
| 816 | "Documentation": { |
| 817 | "Description": "Power Supply input power fault", |
| 818 | "Message": "A power supply has indicated an input or under voltage condition.", |
| 819 | "Notes": [ |
| 820 | "Check the power supply cabling and/or input power ", |
| 821 | "source. The PWRSPLY procedure is used rather than ", |
| 822 | "calling out a location code, as typically these faults ", |
| 823 | "are related to the supplied power, the cable, or the ", |
| 824 | "cable connectors. If the input fault resolves down to an ", |
| 825 | "issue with the power supply itself, the power supply ", |
| 826 | "indicating this input fault should be called out. Add the ", |
| 827 | "CALLOUT_INVENTORY_PATH to the additional data, and set the", |
| 828 | "CALLOUT_PRIORITY to something other than high." |
| 829 | ] |
| 830 | } |
| 831 | }, |
| 832 | |
| 833 | { |
| 834 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Fault", |
| 835 | "Subsystem": "power_supply", |
| 836 | "Severity": "unrecoverable_redundancy_loss", |
| 837 | "ActionFlags": ["service_action", "report", "call_home"], |
| 838 | "ComponentID": "0x2700", |
| 839 | |
| 840 | "SRC": { |
| 841 | "Type": "11", |
| 842 | "ReasonCode": "0x15F1", |
| 843 | "Words6To9": {} |
| 844 | }, |
| 845 | |
| 846 | "Documentation": { |
| 847 | "Description": "Power Supply power fault", |
| 848 | "Message": "The power supply detected a fault condition, see AdditionalData for further details.", |
| 849 | "Notes": [ |
| 850 | "The power supply reporting the fault should be called ", |
| 851 | "out using the CALLOUT_INVENTORY_PATH keyword. Include ", |
| 852 | "specific fault, STATUS_* details, and code level in the ", |
| 853 | "AdditionalData section." |
| 854 | ] |
| 855 | } |
| 856 | }, |
| 857 | |
| 858 | { |
| 859 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.CommFault", |
| 860 | "Subsystem": "power_supply", |
Brandon Wyman | 981ffc3 | 2021-04-06 15:49:12 -0500 | [diff] [blame] | 861 | "Severity": "unrecoverable", |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 862 | "ActionFlags": ["service_action", "report", "call_home"], |
| 863 | "ComponentID": "0x2700", |
| 864 | |
| 865 | "SRC": { |
| 866 | "Type": "11", |
| 867 | "ReasonCode": "0x15F2", |
| 868 | "Words6To9": {} |
| 869 | }, |
| 870 | |
| 871 | "Documentation": { |
| 872 | "Description": "Power Supply non-power fault", |
| 873 | "Message": "A communication failure occurred talking to the power supply", |
| 874 | "Notes": [ |
| 875 | "Communication problems with the power supply could be ", |
| 876 | "the power supply, or any hardware between it and the ", |
| 877 | "BMC. Reporting the error should be passing in a call ", |
| 878 | "out using CALLOUT_DEVICE_PATH." |
| 879 | ] |
| 880 | } |
| 881 | }, |
| 882 | |
| 883 | { |
| 884 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Missing", |
| 885 | "Subsystem": "power_supply", |
Brandon Wyman | 981ffc3 | 2021-04-06 15:49:12 -0500 | [diff] [blame] | 886 | "Severity": "unrecoverable_redundancy_loss", |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 887 | "ActionFlags": ["service_action", "report", "call_home"], |
| 888 | "ComponentID": "0x2700", |
| 889 | |
| 890 | "SRC": { |
| 891 | "Type": "11", |
| 892 | "ReasonCode": "0x15F6", |
| 893 | "Words6To9": {} |
| 894 | }, |
| 895 | |
| 896 | "Callouts": [ |
| 897 | { |
| 898 | "CalloutList": [ |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 899 | { |
| 900 | "Priority": "high", |
| 901 | "SymbolicFRUTrusted": "pwrsply", |
| 902 | "UseInventoryLocCode": true |
| 903 | } |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 904 | ] |
| 905 | } |
| 906 | ], |
| 907 | |
| 908 | "Documentation": { |
| 909 | "Description": "Power Supply is missing", |
| 910 | "Message": "A power supply that should be present is missing", |
| 911 | "Notes": [ |
| 912 | "The CalloutList should use the PWRSPLY symbolic FRU ", |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 913 | "with the trusted location code property. The ", |
| 914 | "location code in this callout is obtained from ", |
| 915 | "the passed in CALLOUT_INVENTORY_PATH value." |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 916 | ] |
| 917 | } |
| 918 | }, |
| 919 | |
| 920 | { |
Adriana Kobylak | 5c0c917 | 2021-04-07 18:26:56 +0000 | [diff] [blame] | 921 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.NotSupported", |
| 922 | "Subsystem": "power_supply", |
| 923 | "Severity": "unrecoverable", |
| 924 | "ActionFlags": ["service_action", "report", "call_home"], |
| 925 | "ComponentID": "0x2700", |
| 926 | |
| 927 | "SRC": { |
| 928 | "Type": "11", |
| 929 | "ReasonCode": "0x15F7", |
| 930 | "Words6To9": {} |
| 931 | }, |
| 932 | |
| 933 | "Documentation": { |
| 934 | "Description": "Power Supply configuration is not supported", |
| 935 | "Message": "The power supply configuration is not supported", |
| 936 | "Notes": [ |
| 937 | "The combination of power supplies detected in the ", |
| 938 | "system is not supported. This could be caused by ", |
| 939 | "mismatched models, less than expected number of power ", |
| 940 | "supplies, or other unsupported characteristics." |
| 941 | ] |
| 942 | } |
| 943 | }, |
| 944 | |
| 945 | { |
Jay Meyer | 54ff54e | 2021-03-14 20:18:41 -0500 | [diff] [blame] | 946 | "Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Blackout", |
| 947 | "Subsystem": "power", |
| 948 | "ActionFlags": [ "report", "service_action" ], |
| 949 | "Severity": "unrecoverable", |
| 950 | "ComponentID": "0x2700", |
| 951 | |
| 952 | "SRC": |
| 953 | { |
| 954 | "Type": "11", |
| 955 | "ReasonCode": "0x00AC", |
| 956 | "Words6To9": {}, |
| 957 | "PowerFault": true |
| 958 | }, |
| 959 | |
| 960 | "Callouts": [ |
| 961 | { |
| 962 | "CalloutList": [ |
| 963 | { "Priority": "high", "SymbolicFRU": "ac_module"} |
| 964 | ] |
| 965 | } |
| 966 | ], |
| 967 | |
| 968 | "Documentation": { |
| 969 | "Description": "Input power was lost while the system was powered on.", |
| 970 | "Message": "Input power was lost while the system was powered on.", |
| 971 | "Notes": [ |
| 972 | "Input power was lost while system powered on.", |
| 973 | "The CalloutList should use the ACMODUL symbolic FRU." |
| 974 | ] |
| 975 | } |
| 976 | }, |
| 977 | |
| 978 | { |
Jim Wright | 7f67890 | 2020-11-30 16:03:57 -0600 | [diff] [blame] | 979 | "Name": "xyz.openbmc_project.Power.Error.Shutdown", |
| 980 | "Subsystem": "power_sequencer", |
| 981 | "ComponentID": "0x2700", |
| 982 | |
| 983 | "SRC": { |
| 984 | "Type": "11", |
| 985 | "ReasonCode": "0x2600", |
| 986 | "Words6To9": {} |
| 987 | }, |
| 988 | |
| 989 | "Callouts": [ |
| 990 | { |
| 991 | "CalloutList": [ |
| 992 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 993 | ] |
| 994 | } |
| 995 | ], |
| 996 | |
| 997 | "Documentation": { |
| 998 | "Description": "A power off was issued because a power fault was detected", |
| 999 | "Message": "A power off was issued because a power fault was detected", |
| 1000 | "Notes": [ |
| 1001 | ] |
| 1002 | } |
| 1003 | }, |
| 1004 | |
| 1005 | { |
Ben Tyner | 0273a22 | 2021-07-12 15:18:13 -0500 | [diff] [blame] | 1006 | "Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Regulator", |
| 1007 | "Subsystem": "power_control_hw", |
| 1008 | "ComponentID": "0x2700", |
| 1009 | |
| 1010 | "SRC": { |
| 1011 | "Type": "11", |
| 1012 | "ReasonCode": "0x2602", |
| 1013 | "Words6To9": {}, |
| 1014 | "PowerFault": true |
| 1015 | }, |
| 1016 | |
| 1017 | "Callouts": [ |
| 1018 | { |
| 1019 | "System": "ibm,rainier", |
| 1020 | "CalloutList": [ |
| 1021 | { |
| 1022 | "Priority": "high", |
| 1023 | "LocCode": "P0-C5" |
| 1024 | }, |
| 1025 | { |
| 1026 | "Priority": "medium", |
| 1027 | "LocCode": "P0" |
| 1028 | } |
| 1029 | ] |
| 1030 | }, |
| 1031 | { |
| 1032 | "System": "ibm,everest", |
| 1033 | "CalloutList": [ |
| 1034 | { |
| 1035 | "Priority": "high", |
| 1036 | "LocCode": "P0-C59" |
| 1037 | }, |
| 1038 | { |
| 1039 | "Priority": "medium", |
| 1040 | "LocCode": "P0" |
| 1041 | } |
| 1042 | ] |
| 1043 | } |
| 1044 | ], |
| 1045 | |
| 1046 | "Documentation": { |
| 1047 | "Description": "A power off was issued because a regulator for standby power faulted", |
| 1048 | "Message": "A power off was issued because a regulator for standby power faulted", |
| 1049 | "Notes": [ |
| 1050 | ] |
| 1051 | } |
| 1052 | }, |
| 1053 | |
| 1054 | { |
Jim Wright | 7f67890 | 2020-11-30 16:03:57 -0600 | [diff] [blame] | 1055 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerPGOODFault", |
| 1056 | "Subsystem": "power_sequencer", |
| 1057 | "ComponentID": "0x2700", |
| 1058 | |
| 1059 | "SRC": { |
| 1060 | "Type": "11", |
| 1061 | "ReasonCode": "0x2610", |
| 1062 | "Words6To9": {} |
| 1063 | }, |
| 1064 | |
| 1065 | "CalloutsUsingAD": { |
| 1066 | "ADName": "INPUT_NAME", "CalloutsWithTheirADValues": [ |
| 1067 | { |
| 1068 | "ADValue": "PCIE_SLOT0", "Callouts": [ |
| 1069 | { |
| 1070 | "CalloutList": [ |
| 1071 | { "Priority": "high", "LocCode": "P0-C0" }, |
| 1072 | { "Priority": "medium", "LocCode": "P0" } |
| 1073 | ] |
| 1074 | } |
| 1075 | ] |
| 1076 | }, |
| 1077 | { |
| 1078 | "ADValue": "PCIE_SLOT1", "Callouts": [ |
| 1079 | { |
| 1080 | "CalloutList": [ |
| 1081 | { "Priority": "high", "LocCode": "P0-C1" }, |
| 1082 | { "Priority": "medium", "LocCode": "P0" } |
| 1083 | ] |
| 1084 | } |
| 1085 | ] |
| 1086 | }, |
| 1087 | { |
| 1088 | "ADValue": "PCIE_SLOT2", "Callouts": [ |
| 1089 | { |
| 1090 | "CalloutList": [ |
| 1091 | { "Priority": "high", "LocCode": "P0-C2" }, |
| 1092 | { "Priority": "medium", "LocCode": "P0" } |
| 1093 | ] |
| 1094 | } |
| 1095 | ] |
| 1096 | }, |
| 1097 | { |
| 1098 | "ADValue": "PCIE_SLOT3", "Callouts": [ |
| 1099 | { |
| 1100 | "CalloutList": [ |
| 1101 | { "Priority": "high", "LocCode": "P0-C3" }, |
| 1102 | { "Priority": "medium", "LocCode": "P0" } |
| 1103 | ] |
| 1104 | } |
| 1105 | ] |
| 1106 | }, |
| 1107 | { |
| 1108 | "ADValue": "PCIE_SLOT4", "Callouts": [ |
| 1109 | { |
| 1110 | "CalloutList": [ |
| 1111 | { "Priority": "high", "LocCode": "P0-C4" }, |
| 1112 | { "Priority": "medium", "LocCode": "P0" } |
| 1113 | ] |
| 1114 | } |
| 1115 | ] |
| 1116 | }, |
| 1117 | { |
| 1118 | "ADValue": "PCIE_SLOT7", "Callouts": [ |
| 1119 | { |
| 1120 | "CalloutList": [ |
| 1121 | { "Priority": "high", "LocCode": "P0-C7" }, |
| 1122 | { "Priority": "medium", "LocCode": "P0" } |
| 1123 | ] |
| 1124 | } |
| 1125 | ] |
| 1126 | }, |
| 1127 | { |
| 1128 | "ADValue": "PCIE_SLOT8", "Callouts": [ |
| 1129 | { |
| 1130 | "CalloutList": [ |
| 1131 | { "Priority": "high", "LocCode": "P0-C8" }, |
| 1132 | { "Priority": "medium", "LocCode": "P0" } |
| 1133 | ] |
| 1134 | } |
| 1135 | ] |
| 1136 | }, |
| 1137 | { |
| 1138 | "ADValue": "PCIE_SLOT9", "Callouts": [ |
| 1139 | { |
| 1140 | "CalloutList": [ |
| 1141 | { "Priority": "high", "LocCode": "P0-C9" }, |
| 1142 | { "Priority": "medium", "LocCode": "P0" } |
| 1143 | ] |
| 1144 | } |
| 1145 | ] |
| 1146 | }, |
| 1147 | { |
| 1148 | "ADValue": "PCIE_SLOT10", "Callouts": [ |
| 1149 | { |
| 1150 | "CalloutList": [ |
| 1151 | { "Priority": "high", "LocCode": "P0-C10" }, |
| 1152 | { "Priority": "medium", "LocCode": "P0" } |
| 1153 | ] |
| 1154 | } |
| 1155 | ] |
| 1156 | }, |
| 1157 | { |
| 1158 | "ADValue": "PCIE_SLOT11", "Callouts": [ |
| 1159 | { |
| 1160 | "CalloutList": [ |
| 1161 | { "Priority": "high", "LocCode": "P0-C11" }, |
| 1162 | { "Priority": "medium", "LocCode": "P0" } |
| 1163 | ] |
| 1164 | } |
| 1165 | ] |
| 1166 | }, |
| 1167 | { |
| 1168 | "ADValue": "PGOOD_12A", "Callouts": [ |
| 1169 | { |
| 1170 | "CalloutList": [ |
| 1171 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1172 | ] |
| 1173 | } |
| 1174 | ] |
| 1175 | }, |
| 1176 | { |
| 1177 | "ADValue": "PGOOD_12B", "Callouts": [ |
| 1178 | { |
| 1179 | "CalloutList": [ |
| 1180 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1181 | ] |
| 1182 | } |
| 1183 | ] |
| 1184 | }, |
| 1185 | { |
| 1186 | "ADValue": "PGOOD_12C", "Callouts": [ |
| 1187 | { |
| 1188 | "CalloutList": [ |
| 1189 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1190 | ] |
| 1191 | } |
| 1192 | ] |
| 1193 | }, |
| 1194 | { |
| 1195 | "ADValue": "PGOOD_12D", "Callouts": [ |
| 1196 | { |
| 1197 | "CalloutList": [ |
| 1198 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1199 | ] |
| 1200 | } |
| 1201 | ] |
| 1202 | }, |
| 1203 | { |
| 1204 | "ADValue": "PGOOD_12L", "Callouts": [ |
| 1205 | { |
| 1206 | "CalloutList": [ |
| 1207 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1208 | ] |
| 1209 | } |
| 1210 | ] |
| 1211 | }, |
| 1212 | { |
| 1213 | "ADValue": "PGOOD_12M", "Callouts": [ |
| 1214 | { |
| 1215 | "CalloutList": [ |
| 1216 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1217 | ] |
| 1218 | } |
| 1219 | ] |
| 1220 | }, |
| 1221 | { |
| 1222 | "ADValue": "PGOOD_12N", "Callouts": [ |
| 1223 | { |
| 1224 | "CalloutList": [ |
| 1225 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1226 | ] |
| 1227 | } |
| 1228 | ] |
| 1229 | }, |
| 1230 | { |
| 1231 | "ADValue": "PGOOD_12P", "Callouts": [ |
| 1232 | { |
| 1233 | "CalloutList": [ |
| 1234 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1235 | ] |
| 1236 | } |
| 1237 | ] |
| 1238 | }, |
| 1239 | { |
| 1240 | "ADValue": "PGOOD_12PCIE", "Callouts": [ |
| 1241 | { |
| 1242 | "CalloutList": [ |
| 1243 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1244 | ] |
| 1245 | } |
| 1246 | ] |
| 1247 | }, |
| 1248 | { |
| 1249 | "ADValue": "PGOOD_12Q", "Callouts": [ |
| 1250 | { |
| 1251 | "CalloutList": [ |
| 1252 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1253 | ] |
| 1254 | } |
| 1255 | ] |
| 1256 | }, |
| 1257 | { |
| 1258 | "ADValue": "PGOOD_12R", "Callouts": [ |
| 1259 | { |
| 1260 | "CalloutList": [ |
| 1261 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1262 | ] |
| 1263 | } |
| 1264 | ] |
| 1265 | }, |
| 1266 | { |
| 1267 | "ADValue": "PGOOD_VDN_DCM0", "Callouts": [ |
| 1268 | { |
| 1269 | "CalloutList": [ |
| 1270 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1271 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1272 | { "Priority": "low", "LocCode": "P0" } |
| 1273 | ] |
| 1274 | } |
| 1275 | ] |
| 1276 | }, |
| 1277 | { |
| 1278 | "ADValue": "PGOOD_VDN_DCM1", "Callouts": [ |
| 1279 | { |
| 1280 | "CalloutList": [ |
| 1281 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1282 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1283 | { "Priority": "low", "LocCode": "P0" } |
| 1284 | ] |
| 1285 | } |
| 1286 | ] |
| 1287 | }, |
| 1288 | { |
| 1289 | "ADValue": "PGOOD_VCS_DCM0", "Callouts": [ |
| 1290 | { |
| 1291 | "CalloutList": [ |
| 1292 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1293 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1294 | { "Priority": "low", "LocCode": "P0" } |
| 1295 | ] |
| 1296 | } |
| 1297 | ] |
| 1298 | }, |
| 1299 | { |
| 1300 | "ADValue": "PGOOD_VCS_DCM1", "Callouts": [ |
| 1301 | { |
| 1302 | "CalloutList": [ |
| 1303 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1304 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1305 | { "Priority": "low", "LocCode": "P0" } |
| 1306 | ] |
| 1307 | } |
| 1308 | ] |
| 1309 | }, |
| 1310 | { |
| 1311 | "ADValue": "PGOOD_VIO_DCM0", "Callouts": [ |
| 1312 | { |
| 1313 | "CalloutList": [ |
| 1314 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1315 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1316 | { "Priority": "low", "LocCode": "P0" } |
| 1317 | ] |
| 1318 | } |
| 1319 | ] |
| 1320 | }, |
| 1321 | { |
| 1322 | "ADValue": "PGOOD_VIO_DCM1", "Callouts": [ |
| 1323 | { |
| 1324 | "CalloutList": [ |
| 1325 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1326 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1327 | { "Priority": "low", "LocCode": "P0" } |
| 1328 | ] |
| 1329 | } |
| 1330 | ] |
| 1331 | }, |
| 1332 | { |
| 1333 | "ADValue": "PGOOD_VPCIE_DCM0", "Callouts": [ |
| 1334 | { |
| 1335 | "CalloutList": [ |
| 1336 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1337 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1338 | { "Priority": "low", "LocCode": "P0" } |
| 1339 | ] |
| 1340 | } |
| 1341 | ] |
| 1342 | }, |
| 1343 | { |
| 1344 | "ADValue": "PGOOD_VPCIE_DCM1", "Callouts": [ |
| 1345 | { |
| 1346 | "CalloutList": [ |
| 1347 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1348 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1349 | { "Priority": "low", "LocCode": "P0" } |
| 1350 | ] |
| 1351 | } |
| 1352 | ] |
| 1353 | } |
| 1354 | ] |
| 1355 | }, |
| 1356 | |
| 1357 | "Documentation": { |
| 1358 | "Description": "The power sequencer chip detected a PGOOD fault", |
| 1359 | "Message": "The power sequencer chip detected a PGOOD fault", |
| 1360 | "Notes": [ |
| 1361 | ] |
| 1362 | } |
| 1363 | }, |
| 1364 | |
| 1365 | { |
| 1366 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault", |
| 1367 | "Subsystem": "power_sequencer", |
| 1368 | "ComponentID": "0x2700", |
| 1369 | |
| 1370 | "SRC": { |
| 1371 | "Type": "11", |
| 1372 | "ReasonCode": "0x2620", |
| 1373 | "Words6To9": {} |
| 1374 | }, |
| 1375 | |
| 1376 | "CalloutsUsingAD": { |
| 1377 | "ADName": "RAIL_NAME", "CalloutsWithTheirADValues": [ |
| 1378 | { |
| 1379 | "ADValue": "12.0V", "Callouts": [ |
| 1380 | { |
| 1381 | "CalloutList": [ |
| 1382 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1383 | ] |
| 1384 | } |
| 1385 | ] |
| 1386 | }, |
| 1387 | { |
| 1388 | "ADValue": "5.0V_USB", "Callouts": [ |
| 1389 | { |
| 1390 | "CalloutList": [ |
| 1391 | { "Priority": "high", "SymbolicFRU": "usb_pgood" }, |
| 1392 | { "Priority": "medium", "LocCode": "P0" } |
| 1393 | ] |
| 1394 | } |
| 1395 | ] |
| 1396 | }, |
| 1397 | { |
| 1398 | "ADValue": "5.0V_DASD", "Callouts": [ |
| 1399 | { |
| 1400 | "CalloutList": [ |
| 1401 | { "Priority": "medium", "LocCode": "P1" }, |
| 1402 | { "Priority": "medium", "LocCode": "P2" }, |
| 1403 | { "Priority": "medium", "LocCode": "P3" }, |
| 1404 | { "Priority": "low", "LocCode": "P0" } |
| 1405 | ] |
| 1406 | } |
| 1407 | ] |
| 1408 | }, |
| 1409 | { |
| 1410 | "ADValue": "3.3VA", "Callouts": [ |
| 1411 | { |
| 1412 | "CalloutList": [ |
| 1413 | { "Priority": "high", "LocCode": "P0" } |
| 1414 | ] |
| 1415 | } |
| 1416 | ] |
| 1417 | }, |
| 1418 | { |
| 1419 | "ADValue": "3.3VB", "Callouts": [ |
| 1420 | { |
| 1421 | "CalloutList": [ |
| 1422 | { "Priority": "high", "LocCode": "P0" } |
| 1423 | ] |
| 1424 | } |
| 1425 | ] |
| 1426 | }, |
| 1427 | { |
| 1428 | "ADValue": "1.5V", "Callouts": [ |
| 1429 | { |
| 1430 | "CalloutList": [ |
| 1431 | { "Priority": "high", "LocCode": "P0" } |
| 1432 | ] |
| 1433 | } |
| 1434 | ] |
| 1435 | }, |
| 1436 | { |
| 1437 | "ADValue": "1.1V", "Callouts": [ |
| 1438 | { |
| 1439 | "CalloutList": [ |
| 1440 | { "Priority": "high", "LocCode": "P0" } |
| 1441 | ] |
| 1442 | } |
| 1443 | ] |
| 1444 | }, |
| 1445 | { |
| 1446 | "ADValue": "VDDA_DCM0", "Callouts": [ |
| 1447 | { |
| 1448 | "CalloutList": [ |
| 1449 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1450 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1451 | { "Priority": "low", "LocCode": "P0" } |
| 1452 | ] |
| 1453 | } |
| 1454 | ] |
| 1455 | }, |
| 1456 | { |
| 1457 | "ADValue": "VDDB_DCM0", "Callouts": [ |
| 1458 | { |
| 1459 | "CalloutList": [ |
| 1460 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1461 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1462 | { "Priority": "low", "LocCode": "P0" } |
| 1463 | ] |
| 1464 | } |
| 1465 | ] |
| 1466 | }, |
| 1467 | { |
| 1468 | "ADValue": "VDDA_DCM1", "Callouts": [ |
| 1469 | { |
| 1470 | "CalloutList": [ |
| 1471 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1472 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1473 | { "Priority": "low", "LocCode": "P0" } |
| 1474 | ] |
| 1475 | } |
| 1476 | ] |
| 1477 | }, |
| 1478 | { |
| 1479 | "ADValue": "VDDB_DCM1", "Callouts": [ |
| 1480 | { |
| 1481 | "CalloutList": [ |
| 1482 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1483 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1484 | { "Priority": "low", "LocCode": "P0" } |
| 1485 | ] |
| 1486 | } |
| 1487 | ] |
| 1488 | }, |
| 1489 | { |
| 1490 | "ADValue": "12.0VCS", "Callouts": [ |
| 1491 | { |
| 1492 | "CalloutList": [ |
| 1493 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1494 | ] |
| 1495 | } |
| 1496 | ] |
| 1497 | }, |
| 1498 | { |
| 1499 | "ADValue": "3.3VCS", "Callouts": [ |
| 1500 | { |
| 1501 | "CalloutList": [ |
| 1502 | { "Priority": "high", "LocCode": "P0" } |
| 1503 | ] |
| 1504 | } |
| 1505 | ] |
| 1506 | }, |
| 1507 | { |
| 1508 | "ADValue": "1.1V_Current", "Callouts": [ |
| 1509 | { |
| 1510 | "CalloutList": [ |
| 1511 | { "Priority": "high", "LocCode": "P0" } |
| 1512 | ] |
| 1513 | } |
| 1514 | ] |
| 1515 | }, |
| 1516 | { |
| 1517 | "ADValue": "5.0V_USB_Current", "Callouts": [ |
| 1518 | { |
| 1519 | "CalloutList": [ |
| 1520 | { "Priority": "high", "SymbolicFRU": "usb_pgood" }, |
| 1521 | { "Priority": "medium", "LocCode": "P0" } |
| 1522 | ] |
| 1523 | } |
| 1524 | ] |
| 1525 | }, |
| 1526 | { |
| 1527 | "ADValue": "5.0V_DASD_Current", "Callouts": [ |
| 1528 | { |
| 1529 | "CalloutList": [ |
| 1530 | { "Priority": "medium", "LocCode": "P1" }, |
| 1531 | { "Priority": "medium", "LocCode": "P2" }, |
| 1532 | { "Priority": "medium", "LocCode": "P3" }, |
| 1533 | { "Priority": "low", "LocCode": "P0" } |
| 1534 | ] |
| 1535 | } |
| 1536 | ] |
| 1537 | }, |
| 1538 | { |
| 1539 | "ADValue": "12.0VN", "Callouts": [ |
| 1540 | { |
| 1541 | "CalloutList": [ |
| 1542 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1543 | ] |
| 1544 | } |
| 1545 | ] |
| 1546 | }, |
| 1547 | { |
| 1548 | "ADValue": "12.0VP", "Callouts": [ |
| 1549 | { |
| 1550 | "CalloutList": [ |
| 1551 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1552 | ] |
| 1553 | } |
| 1554 | ] |
| 1555 | }, |
| 1556 | { |
| 1557 | "ADValue": "12.0VQ", "Callouts": [ |
| 1558 | { |
| 1559 | "CalloutList": [ |
| 1560 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1561 | ] |
| 1562 | } |
| 1563 | ] |
| 1564 | }, |
| 1565 | { |
| 1566 | "ADValue": "12.0VR", "Callouts": [ |
| 1567 | { |
| 1568 | "CalloutList": [ |
| 1569 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1570 | ] |
| 1571 | } |
| 1572 | ] |
| 1573 | }, |
| 1574 | { |
| 1575 | "ADValue": "ThermalDiode1", "Callouts": [ |
| 1576 | { |
| 1577 | "CalloutList": [ |
| 1578 | { "Priority": "high", "LocCode": "P0" } |
| 1579 | ] |
| 1580 | } |
| 1581 | ] |
| 1582 | }, |
| 1583 | { |
| 1584 | "ADValue": "ThermalDiode2", "Callouts": [ |
| 1585 | { |
| 1586 | "CalloutList": [ |
| 1587 | { "Priority": "high", "LocCode": "P0" } |
| 1588 | ] |
| 1589 | } |
| 1590 | ] |
| 1591 | }, |
| 1592 | { |
| 1593 | "ADValue": "ThermalDiode3", "Callouts": [ |
| 1594 | { |
| 1595 | "CalloutList": [ |
| 1596 | { "Priority": "high", "LocCode": "P0" } |
| 1597 | ] |
| 1598 | } |
| 1599 | ] |
| 1600 | }, |
| 1601 | { |
| 1602 | "ADValue": "ThermalDiode4", "Callouts": [ |
| 1603 | { |
| 1604 | "CalloutList": [ |
| 1605 | { "Priority": "high", "LocCode": "P0" } |
| 1606 | ] |
| 1607 | } |
| 1608 | ] |
| 1609 | } |
| 1610 | ] |
| 1611 | }, |
| 1612 | |
| 1613 | "Documentation": { |
| 1614 | "Description": "The power sequencer chip detected a voltage fault", |
| 1615 | "Message": "The power sequencer chip detected a voltage fault", |
| 1616 | "Notes": [ |
| 1617 | ] |
| 1618 | } |
| 1619 | }, |
| 1620 | |
| 1621 | { |
Shawn McCarney | 7f1ec94 | 2021-07-28 13:33:34 -0500 | [diff] [blame] | 1622 | "Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.N", |
| 1623 | "Subsystem": "power", |
| 1624 | "Severity": "predictive_redundancy_loss", |
| 1625 | "ComponentID": "0x2700", |
| 1626 | |
| 1627 | "SRC": { |
| 1628 | "Type": "11", |
| 1629 | "ReasonCode": "0x2700", |
| 1630 | "Words6To9": {} |
| 1631 | }, |
| 1632 | |
| 1633 | "Documentation": { |
| 1634 | "Description": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)", |
| 1635 | "Message": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)", |
| 1636 | "Notes": [ |
| 1637 | "CALLOUT_INVENTORY_PATH should be specified in the ", |
| 1638 | "AdditionalData property of the event log so that ", |
| 1639 | "the device is called out but not the communication path." |
| 1640 | ] |
| 1641 | } |
| 1642 | }, |
| 1643 | |
| 1644 | { |
| 1645 | "Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.NPlus1", |
| 1646 | "Subsystem": "power", |
| 1647 | "Severity": "non_error", |
| 1648 | "MfgSeverity": "predictive_redundancy_loss", |
| 1649 | "ActionFlags": ["report"], |
| 1650 | "MfgActionFlags": ["service_action", "report", "call_home"], |
| 1651 | "ComponentID": "0x2700", |
| 1652 | |
| 1653 | "SRC": { |
| 1654 | "Type": "11", |
| 1655 | "ReasonCode": "0x2701", |
| 1656 | "Words6To9": {} |
| 1657 | }, |
| 1658 | |
| 1659 | "Documentation": { |
| 1660 | "Description": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)", |
| 1661 | "Message": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)", |
| 1662 | "Notes": [ |
| 1663 | "CALLOUT_INVENTORY_PATH should be specified in the ", |
| 1664 | "AdditionalData property of the event log so that ", |
| 1665 | "the device is called out but not the communication path." |
| 1666 | ] |
| 1667 | } |
| 1668 | }, |
| 1669 | |
| 1670 | { |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 1671 | "Name": "xyz.openbmc_project.Power.Regulators.Error.WriteVerification", |
| 1672 | "Subsystem": "power", |
| 1673 | "ComponentID": "0x2700", |
| 1674 | |
| 1675 | "SRC": { |
| 1676 | "Type": "11", |
| 1677 | "ReasonCode": "0x2900", |
| 1678 | "Words6To9": {} |
| 1679 | }, |
| 1680 | |
| 1681 | "Documentation": { |
| 1682 | "Description": "A write verification error occurred on a device", |
| 1683 | "Message": "A write verification error occurred on a device", |
| 1684 | "Notes": [ |
| 1685 | "This error occurs when a device register is written, ", |
| 1686 | "read back, and the two values do not match. This is ", |
| 1687 | "also called a read-back error. The device should be ", |
| 1688 | "identified using the CALLOUT_DEVICE_PATH or ", |
| 1689 | "CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR keywords in the ", |
| 1690 | "AdditionalData property of the event log. This will ", |
| 1691 | "cause the device and the hardware in the communication ", |
| 1692 | "path to be called out." |
| 1693 | ] |
| 1694 | } |
| 1695 | }, |
| 1696 | |
| 1697 | { |
| 1698 | "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile", |
| 1699 | "Subsystem": "power", |
| 1700 | "ComponentID": "0x2700", |
| 1701 | |
| 1702 | "SRC": { |
| 1703 | "Type": "11", |
| 1704 | "ReasonCode": "0xA013", |
| 1705 | "Words6To9": {} |
| 1706 | }, |
| 1707 | |
| 1708 | "Callouts": [ |
| 1709 | { |
| 1710 | "CalloutList": [ |
| 1711 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1712 | ] |
| 1713 | } |
| 1714 | ], |
| 1715 | |
| 1716 | "Documentation": { |
| 1717 | "Description": "A regulators configuration file error occurred", |
| 1718 | "Message": "A regulators configuration file error occurred", |
| 1719 | "Notes": [ |
| 1720 | "The regulators configuration file could not be found, ", |
| 1721 | "could not be read, or had invalid contents." |
| 1722 | ] |
| 1723 | } |
| 1724 | }, |
| 1725 | |
| 1726 | { |
Shawn McCarney | 82e31d8 | 2021-02-19 16:25:55 -0600 | [diff] [blame] | 1727 | "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile.Critical", |
| 1728 | "Subsystem": "power", |
| 1729 | "Severity": "critical_system_term", |
| 1730 | "ComponentID": "0x2700", |
| 1731 | |
| 1732 | "SRC": { |
| 1733 | "Type": "11", |
| 1734 | "ReasonCode": "0xA014", |
| 1735 | "Words6To9": {}, |
| 1736 | "PowerFault": true |
| 1737 | }, |
| 1738 | |
| 1739 | "Callouts": [ |
| 1740 | { |
| 1741 | "CalloutList": [ |
| 1742 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1743 | ] |
| 1744 | } |
| 1745 | ], |
| 1746 | |
| 1747 | "Documentation": { |
| 1748 | "Description": "A critical regulators configuration file error occurred", |
| 1749 | "Message": "A critical regulators configuration file error occurred", |
| 1750 | "Notes": [ |
| 1751 | "The regulators configuration file could not be found, ", |
| 1752 | "could not be read, or had invalid contents. As a result ", |
| 1753 | "voltage regulators could not be configured, and the ", |
| 1754 | "chassis could not be powered on." |
| 1755 | ] |
| 1756 | } |
| 1757 | }, |
| 1758 | |
| 1759 | { |
Jim Wright | 7f67890 | 2020-11-30 16:03:57 -0600 | [diff] [blame] | 1760 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerFault", |
| 1761 | "Subsystem": "power_sequencer", |
| 1762 | "ComponentID": "0x2700", |
| 1763 | |
| 1764 | "SRC": { |
| 1765 | "Type": "11", |
| 1766 | "ReasonCode": "0xD000", |
| 1767 | "Words6To9": {} |
| 1768 | }, |
| 1769 | |
| 1770 | "Callouts": [ |
| 1771 | { |
| 1772 | "CalloutList": [ |
| 1773 | { "Priority": "high", "LocCode": "P0" } |
| 1774 | ] |
| 1775 | } |
| 1776 | ], |
| 1777 | |
| 1778 | "Documentation": { |
| 1779 | "Description": "The power sequencer chip detected a fault", |
| 1780 | "Message": "The power sequencer chip detected a fault", |
| 1781 | "Notes": [ |
| 1782 | ] |
| 1783 | } |
| 1784 | }, |
| 1785 | |
| 1786 | { |
| 1787 | "Name": "xyz.openbmc_project.Power.Error.PowerOnFailure", |
| 1788 | "Subsystem": "power_sequencer", |
| 1789 | "ComponentID": "0x2700", |
| 1790 | |
| 1791 | "SRC": { |
| 1792 | "Type": "11", |
| 1793 | "ReasonCode": "0xD002", |
| 1794 | "Words6To9": {} |
| 1795 | }, |
| 1796 | |
| 1797 | "Callouts": [ |
| 1798 | { |
| 1799 | "CalloutList": [ |
| 1800 | { "Priority": "high", "LocCode": "P0" } |
| 1801 | ] |
| 1802 | } |
| 1803 | ], |
| 1804 | |
| 1805 | "Documentation": { |
| 1806 | "Description": "System power failed to turn on", |
| 1807 | "Message": "System power failed to turn on", |
| 1808 | "Notes": [ |
| 1809 | ] |
| 1810 | } |
| 1811 | }, |
| 1812 | |
| 1813 | { |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 1814 | "Name": "xyz.openbmc_project.Power.Error.Internal", |
| 1815 | "Subsystem": "power", |
| 1816 | "ComponentID": "0x2700", |
| 1817 | |
| 1818 | "SRC": { |
| 1819 | "Type": "11", |
| 1820 | "ReasonCode": "0xE000", |
| 1821 | "Words6To9": {} |
| 1822 | }, |
| 1823 | |
| 1824 | "Callouts": [ |
| 1825 | { |
| 1826 | "CalloutList": [ |
| 1827 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1828 | ] |
| 1829 | } |
| 1830 | ], |
| 1831 | |
| 1832 | "Documentation": { |
| 1833 | "Description": "An internal firmware error occurred", |
| 1834 | "Message": "An internal firmware error occurred", |
| 1835 | "Notes": [ |
| 1836 | "The error details must be provided in the AdditionalData ", |
| 1837 | "property of the event log." |
| 1838 | ] |
| 1839 | } |
| 1840 | }, |
| 1841 | |
| 1842 | { |
| 1843 | "Name": "xyz.openbmc_project.Power.Error.I2C", |
| 1844 | "Subsystem": "cec_i2c", |
| 1845 | "ComponentID": "0x2700", |
| 1846 | |
| 1847 | "SRC": { |
| 1848 | "Type": "11", |
| 1849 | "ReasonCode": "0xE100", |
| 1850 | "Words6To9": {} |
| 1851 | }, |
| 1852 | |
| 1853 | "Documentation": { |
| 1854 | "Description": "An I2C error occurred communicating with a device", |
| 1855 | "Message": "An I2C error occurred communicating with a device", |
| 1856 | "Notes": [ |
| 1857 | "The device should be identified using the ", |
| 1858 | "CALLOUT_DEVICE_PATH or CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR ", |
| 1859 | "keywords in the AdditionalData property of the event ", |
| 1860 | "log. This will cause the device and the hardware in the ", |
| 1861 | "communication path to be called out." |
| 1862 | ] |
| 1863 | } |
| 1864 | }, |
| 1865 | |
| 1866 | { |
| 1867 | "Name": "xyz.openbmc_project.Power.Error.PMBus", |
| 1868 | "Subsystem": "power", |
| 1869 | "ComponentID": "0x2700", |
| 1870 | |
| 1871 | "SRC": { |
| 1872 | "Type": "11", |
| 1873 | "ReasonCode": "0xE200", |
| 1874 | "Words6To9": {} |
| 1875 | }, |
| 1876 | |
| 1877 | "Documentation": { |
| 1878 | "Description": "A PMBus error occurred on a device", |
| 1879 | "Message": "A PMBus error occurred on a device", |
| 1880 | "Notes": [ |
| 1881 | "This error occurs when the I2C communication was ", |
| 1882 | "successful, but the PMBus value read is invalid or ", |
| 1883 | "unsupported. CALLOUT_INVENTORY_PATH should be specified ", |
| 1884 | "in the AdditionalData property of the event log so that ", |
| 1885 | "the device is called out but not the communication path." |
| 1886 | ] |
| 1887 | } |
| 1888 | }, |
| 1889 | |
| 1890 | { |
| 1891 | "Name": "xyz.openbmc_project.Power.Error.DBus", |
| 1892 | "Subsystem": "power", |
| 1893 | "ComponentID": "0x2700", |
| 1894 | |
| 1895 | "SRC": { |
| 1896 | "Type": "11", |
| 1897 | "ReasonCode": "0xE300", |
| 1898 | "Words6To9": {} |
| 1899 | }, |
| 1900 | |
| 1901 | "Callouts": [ |
| 1902 | { |
| 1903 | "CalloutList": [ |
| 1904 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1905 | ] |
| 1906 | } |
| 1907 | ], |
| 1908 | |
| 1909 | "Documentation": { |
| 1910 | "Description": "A firmware inter-process communication (D-Bus) error occurred", |
| 1911 | "Message": "A firmware inter-process communication (D-Bus) error occurred" |
| 1912 | } |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1913 | }, |
| 1914 | |
| 1915 | { |
Matt Spinler | 7c9c07e | 2020-10-22 10:16:37 -0500 | [diff] [blame] | 1916 | "Name": "xyz.openbmc_project.Fan.Error.Fault", |
| 1917 | "Subsystem": "power_fans", |
| 1918 | "ComponentID": "0x2800", |
| 1919 | |
| 1920 | "SRC": { |
| 1921 | "Type": "11", |
| 1922 | "ReasonCode": "0x76F0", |
| 1923 | "Words6To9": {} |
| 1924 | }, |
| 1925 | |
| 1926 | "Documentation": { |
| 1927 | "Description": "Fan rotor fault", |
| 1928 | "Message": "Fan rotor fault", |
| 1929 | "Notes": [ |
| 1930 | "This error occurs when a fan rotor has been faulted for a ", |
| 1931 | "certain amount of time. The callout is the fan which is ", |
| 1932 | "passed in with CALLOUT_INVENTORY_PATH. The severity is ", |
| 1933 | "passed in during creation and will be either informational ", |
| 1934 | "or unrecoverable. The action flags use the defaults and ", |
| 1935 | "vary based on the severity." |
| 1936 | ] |
| 1937 | } |
| 1938 | }, |
| 1939 | |
| 1940 | { |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1941 | "Name": "xyz.openbmc_project.Fan.Error.Missing", |
| 1942 | "Subsystem": "power_fans", |
| 1943 | "ComponentID": "0x2800", |
| 1944 | "Severity": "unrecoverable_redundancy_loss", |
| 1945 | "ActionFlags": ["service_action", "report", "call_home"], |
| 1946 | |
| 1947 | "SRC": { |
| 1948 | "Type": "11", |
| 1949 | "ReasonCode": "0x76F1", |
| 1950 | "Words6To9": {} |
| 1951 | }, |
| 1952 | |
| 1953 | "Callouts": [ |
| 1954 | { |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1955 | "System": "ibm,rainier", |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1956 | "CalloutList": [ |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 1957 | { |
| 1958 | "Priority": "high", |
| 1959 | "SymbolicFRUTrusted": "air_mover", |
| 1960 | "UseInventoryLocCode": true |
| 1961 | }, |
| 1962 | { |
| 1963 | "Priority": "low", |
| 1964 | "LocCode": "P0" |
| 1965 | } |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1966 | ] |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1967 | }, |
| 1968 | { |
| 1969 | "System": "ibm,everest", |
| 1970 | "CalloutList": [ |
| 1971 | { |
| 1972 | "Priority": "high", |
| 1973 | "SymbolicFRUTrusted": "air_mover", |
| 1974 | "UseInventoryLocCode": true |
| 1975 | }, |
| 1976 | { |
| 1977 | "Priority": "low", |
| 1978 | "LocCode": "P1" |
| 1979 | } |
| 1980 | ] |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1981 | } |
| 1982 | ], |
| 1983 | |
| 1984 | "Documentation": { |
| 1985 | "Description": "A fan is missing", |
| 1986 | "Message": "A fan is missing", |
| 1987 | "Notes": [ |
| 1988 | "This error occurs when a fan has been missing for a ", |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 1989 | "certain amount of time. The first callout is the ", |
| 1990 | "symbolic FRU AIR_MOVR that has the trusted fan location ", |
| 1991 | "code, which it gets using the passed in ", |
| 1992 | "CALLOUT_INVENTORY_PATH. The second callout is the FRU ", |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1993 | "where the controller and GPIO expander are." |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1994 | ] |
| 1995 | } |
SunnySrivastava1984 | 1ec60ea | 2020-09-03 07:07:25 -0500 | [diff] [blame] | 1996 | }, |
| 1997 | |
| 1998 | { |
Matt Spinler | adf070b | 2021-04-21 13:39:45 -0500 | [diff] [blame] | 1999 | "Name": "xyz.openbmc_project.Fan.Presence.Error.Detection", |
| 2000 | "ComponentID": "0x2800", |
| 2001 | "Subsystem": "power_fans", |
| 2002 | "Severity": "non_error", |
| 2003 | "ActionFlags": ["report"], |
| 2004 | "MfgSeverity": "predictive", |
| 2005 | "MfgActionFlags": ["service_action", "report"], |
| 2006 | |
| 2007 | "SRC": { |
| 2008 | "Type": "11", |
| 2009 | "ReasonCode": "0x76F2", |
| 2010 | "Words6To9": {} |
| 2011 | }, |
| 2012 | |
| 2013 | "Callouts": [ |
| 2014 | { |
| 2015 | "System": "ibm,rainier", |
| 2016 | "CalloutList": [ |
| 2017 | {"Priority": "medium", "LocCode": "P0"} |
| 2018 | ] |
| 2019 | }, |
| 2020 | { |
| 2021 | "System": "ibm,everest", |
| 2022 | "CalloutList": [ |
| 2023 | {"Priority": "medium", "LocCode": "P1"} |
| 2024 | ] |
| 2025 | } |
| 2026 | ], |
| 2027 | |
| 2028 | "Documentation": { |
| 2029 | "Description": "Presence detect methods for the same fan disagree", |
| 2030 | "Message": "Presence detect methods for the same fan disagree", |
| 2031 | "Notes": [ |
| 2032 | "This error occurs when there is more than one way to detect", |
| 2033 | "fan presence, and they don't all agree. For example, the", |
| 2034 | "GPIO says a fan isn't present, but the tach readings are", |
| 2035 | "nonzero. This is informational, unless in manufacturing.", |
| 2036 | "The fan FRU is passed in as a high priority callout.", |
| 2037 | "The FRU the GPIO source is on is called out medium." |
| 2038 | ] |
| 2039 | } |
| 2040 | }, |
| 2041 | |
| 2042 | { |
Matt Spinler | dde9920 | 2021-06-14 12:15:59 -0600 | [diff] [blame] | 2043 | "Name": "xyz.openbmc_project.Fan.Error.FanControllerOffline", |
| 2044 | "ComponentID": "0x2800", |
| 2045 | "Subsystem": "power_fans", |
| 2046 | "Severity": "critical_system_term", |
| 2047 | "ActionFlags": ["service_action", "report", "call_home"], |
| 2048 | |
| 2049 | "SRC": { |
| 2050 | "Type": "11", |
| 2051 | "ReasonCode": "0x76F3", |
| 2052 | "Words6To9": {}, |
| 2053 | "PowerFault": true |
| 2054 | }, |
| 2055 | |
| 2056 | "Callouts": [ |
| 2057 | { |
| 2058 | "System": "ibm,rainier", |
| 2059 | "CalloutList": [ |
| 2060 | {"Priority": "high", "LocCode": "P0-C5"}, |
| 2061 | {"Priority": "medium_group_a", "LocCode": "P0-T12", "SymbolicFRUTrusted": "fan_cable"}, |
| 2062 | {"Priority": "medium_group_a", "LocCode": "P0-T17", "SymbolicFRUTrusted": "cable_continued"}, |
| 2063 | {"Priority": "low", "LocCode": "P0"} |
| 2064 | ] |
| 2065 | }, |
| 2066 | { |
| 2067 | "System": "ibm,everest", |
| 2068 | "CalloutList": [ |
| 2069 | {"Priority": "high", "LocCode": "P0-C0"}, |
| 2070 | {"Priority": "medium", "LocCode": "P1"}, |
| 2071 | {"Priority": "low", "LocCode": "P0"} |
| 2072 | ] |
| 2073 | } |
| 2074 | ], |
| 2075 | |
| 2076 | "Documentation": { |
| 2077 | "Description": "The fan controller device is offline", |
| 2078 | "Message": "The fan controller is offline. The system must be powered off.", |
| 2079 | "Notes": [ |
| 2080 | "The device that controls the fans is offline so the fan", |
| 2081 | "targets and speeds are unknown. The system will be shut", |
| 2082 | "down to preserve thermal safety. There may be an I2C", |
| 2083 | "or power problem with the device." |
| 2084 | ] |
| 2085 | } |
| 2086 | }, |
| 2087 | |
| 2088 | { |
Mike Capps | abc276e | 2021-06-18 16:41:30 -0400 | [diff] [blame] | 2089 | "Name": "xyz.openbmc_project.Fan.Presence.Error.GPIODeviceUnavailable", |
| 2090 | "Subsystem": "power_fans", |
| 2091 | "ComponentID": "0x2800", |
| 2092 | "Severity": "unrecoverable_redundancy_loss", |
| 2093 | "ActionFlags": ["service_action", "report", "call_home"], |
| 2094 | |
| 2095 | "SRC": { |
| 2096 | "Type": "11", |
| 2097 | "ReasonCode": "0x76F4", |
| 2098 | "Words6To9": {} |
| 2099 | }, |
| 2100 | |
| 2101 | "Callouts": [ |
| 2102 | { |
| 2103 | "System" : "ibm,rainier", |
| 2104 | "CalloutList": [ |
| 2105 | {"Priority": "high", "LocCode": "P0-C5"}, |
| 2106 | {"Priority": "medium_group_a", "LocCode": "P0-T12","SymbolicFRUTrusted": "fan_cable"}, |
| 2107 | {"Priority": "medium_group_a", "LocCode": "P0-T17","SymbolicFRUTrusted": "cable_continued"}, |
| 2108 | {"Priority": "low", "LocCode": "P0"} |
| 2109 | ] |
| 2110 | }, |
| 2111 | { |
| 2112 | "System" : "ibm,everest", |
| 2113 | "CalloutList": [ |
| 2114 | {"Priority": "high", "LocCode": "P0-C0"}, |
| 2115 | {"Priority": "medium", "LocCode": "P1"}, |
| 2116 | {"Priority": "low", "LocCode": "P0"} |
| 2117 | ] |
| 2118 | } |
| 2119 | ], |
| 2120 | |
| 2121 | "Documentation": { |
| 2122 | "Description": "Fan GPIO sensors not present", |
| 2123 | "Message": "Fan GPIO sensors not present", |
| 2124 | "Notes": [ |
| 2125 | "The device that reports fan presence is not functioning." |
| 2126 | ] |
| 2127 | } |
| 2128 | }, |
| 2129 | |
| 2130 | { |
Matt Spinler | 86e40dd | 2021-01-29 11:19:36 -0600 | [diff] [blame] | 2131 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHigh", |
| 2132 | "Subsystem": "power", |
| 2133 | "ComponentID": "0x2800", |
| 2134 | "Severity": "predictive", |
| 2135 | "ActionFlags": ["service_action", "report"], |
| 2136 | |
| 2137 | "SRC": { |
| 2138 | "ReasonCode": "0x2801", |
| 2139 | "Words6To9": {} |
| 2140 | }, |
| 2141 | |
| 2142 | "CalloutsUsingAD": { |
| 2143 | "ADName": "SENSOR_NAME", |
| 2144 | "CalloutsWithTheirADValues": [ |
| 2145 | { |
| 2146 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2147 | "Callouts": [ |
| 2148 | { |
| 2149 | "CalloutList": [ |
| 2150 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 2151 | ] |
| 2152 | } |
| 2153 | ] |
| 2154 | } |
| 2155 | ] |
| 2156 | }, |
| 2157 | |
| 2158 | "Documentation": { |
| 2159 | "Description": "A temperature sensor exceeded its performance loss threshold.", |
| 2160 | "Message": "A temperature sensor exceeded its performance loss threshold.", |
| 2161 | "Notes": [ |
| 2162 | "A temperature sensor crossed its performance loss threshold value", |
| 2163 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 2164 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 2165 | "a FRU callout." |
| 2166 | ] |
| 2167 | } |
| 2168 | }, |
| 2169 | |
| 2170 | { |
| 2171 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHighClear", |
| 2172 | "Subsystem": "power", |
| 2173 | "ComponentID": "0x2800", |
| 2174 | "Severity": "non_error", |
| 2175 | "ActionFlags": ["report"], |
| 2176 | "EventType": "env_normal", |
| 2177 | |
| 2178 | "SRC": { |
| 2179 | "ReasonCode": "0x2802", |
| 2180 | "Words6To9": {} |
| 2181 | }, |
| 2182 | |
| 2183 | "CalloutsUsingAD": { |
| 2184 | "ADName": "SENSOR_NAME", |
| 2185 | "CalloutsWithTheirADValues": [ |
| 2186 | { |
| 2187 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2188 | "Callouts": [ |
| 2189 | { |
| 2190 | "CalloutList": [ |
| 2191 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 2192 | ] |
| 2193 | } |
| 2194 | ] |
| 2195 | } |
| 2196 | ] |
| 2197 | }, |
| 2198 | |
| 2199 | "Documentation": { |
| 2200 | "Description": "A temperature sensor is under its performance loss threshold.", |
| 2201 | "Message": "A temperature sensor is under its performance loss threshold.", |
| 2202 | "Notes": [ |
| 2203 | "A temperature sensor crossed under its performance loss threshold value", |
| 2204 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 2205 | ] |
| 2206 | } |
| 2207 | }, |
| 2208 | |
| 2209 | { |
| 2210 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHigh", |
| 2211 | "Subsystem": "power", |
| 2212 | "ComponentID": "0x2800", |
| 2213 | "Severity": "predictive", |
| 2214 | "ActionFlags": ["service_action", "report"], |
| 2215 | |
| 2216 | "SRC": { |
| 2217 | "ReasonCode": "0x2803", |
| 2218 | "Words6To9": {} |
| 2219 | }, |
| 2220 | |
| 2221 | "CalloutsUsingAD": { |
| 2222 | "ADName": "SENSOR_NAME", |
| 2223 | "CalloutsWithTheirADValues": [ |
| 2224 | { |
| 2225 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2226 | "Callouts": [ |
| 2227 | { |
| 2228 | "CalloutList": [ |
| 2229 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 2230 | ] |
| 2231 | } |
| 2232 | ] |
| 2233 | } |
| 2234 | ] |
| 2235 | }, |
| 2236 | |
| 2237 | "Documentation": { |
| 2238 | "Description": "A temperature sensor exceeded its warning threshold.", |
| 2239 | "Message": "A temperature sensor exceeded its warning threshold.", |
| 2240 | "Notes": [ |
| 2241 | "A temperature sensor crossed its warning threshold value", |
| 2242 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 2243 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 2244 | "a FRU callout." |
| 2245 | ] |
| 2246 | } |
| 2247 | }, |
| 2248 | |
| 2249 | { |
| 2250 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHighClear", |
| 2251 | "Subsystem": "power", |
| 2252 | "ComponentID": "0x2800", |
| 2253 | "Severity": "non_error", |
| 2254 | "ActionFlags": ["report"], |
| 2255 | "EventType": "env_normal", |
| 2256 | |
| 2257 | "SRC": { |
| 2258 | "ReasonCode": "0x2804", |
| 2259 | "Words6To9": {} |
| 2260 | }, |
| 2261 | |
| 2262 | "CalloutsUsingAD": { |
| 2263 | "ADName": "SENSOR_NAME", |
| 2264 | "CalloutsWithTheirADValues": [ |
| 2265 | { |
| 2266 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2267 | "Callouts": [ |
| 2268 | { |
| 2269 | "CalloutList": [ |
| 2270 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 2271 | ] |
| 2272 | } |
| 2273 | ] |
| 2274 | } |
| 2275 | ] |
| 2276 | }, |
| 2277 | |
| 2278 | "Documentation": { |
| 2279 | "Description": "A temperature sensor is under its warning threshold.", |
| 2280 | "Message": "A temperature sensor is under its warning threshold.", |
| 2281 | "Notes": [ |
| 2282 | "A temperature sensor crossed under its warning threshold value", |
| 2283 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 2284 | ] |
| 2285 | } |
| 2286 | }, |
| 2287 | |
| 2288 | { |
| 2289 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHigh", |
| 2290 | "Subsystem": "power", |
| 2291 | "ComponentID": "0x2800", |
| 2292 | "Severity": "predictive", |
| 2293 | "ActionFlags": ["service_action", "report"], |
| 2294 | |
| 2295 | "SRC": { |
| 2296 | "ReasonCode": "0x2805", |
| 2297 | "Words6To9": {} |
| 2298 | }, |
| 2299 | |
| 2300 | "CalloutsUsingAD": { |
| 2301 | "ADName": "SENSOR_NAME", |
| 2302 | "CalloutsWithTheirADValues": [ |
| 2303 | { |
| 2304 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2305 | "Callouts": [ |
| 2306 | { |
| 2307 | "CalloutList": [ |
| 2308 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 2309 | ] |
| 2310 | } |
| 2311 | ] |
| 2312 | } |
| 2313 | ] |
| 2314 | }, |
| 2315 | |
| 2316 | "Documentation": { |
| 2317 | "Description": "A temperature sensor exceeded its critical threshold.", |
| 2318 | "Message": "A temperature sensor exceeded its critical threshold.", |
| 2319 | "Notes": [ |
| 2320 | "A temperature sensor crossed its critical threshold value", |
| 2321 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 2322 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 2323 | "a FRU callout." |
| 2324 | ] |
| 2325 | } |
| 2326 | }, |
| 2327 | |
| 2328 | { |
| 2329 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHighClear", |
| 2330 | "Subsystem": "power", |
| 2331 | "ComponentID": "0x2800", |
| 2332 | "Severity": "non_error", |
| 2333 | "ActionFlags": ["report"], |
| 2334 | "EventType": "env_normal", |
| 2335 | |
| 2336 | "SRC": { |
| 2337 | "ReasonCode": "0x2806", |
| 2338 | "Words6To9": {} |
| 2339 | }, |
| 2340 | |
| 2341 | "CalloutsUsingAD": { |
| 2342 | "ADName": "SENSOR_NAME", |
| 2343 | "CalloutsWithTheirADValues": [ |
| 2344 | { |
| 2345 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 2346 | "Callouts": [ |
| 2347 | { |
| 2348 | "CalloutList": [ |
| 2349 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 2350 | ] |
| 2351 | } |
| 2352 | ] |
| 2353 | } |
| 2354 | ] |
| 2355 | }, |
| 2356 | |
| 2357 | "Documentation": { |
| 2358 | "Description": "A temperature sensor is under its critical threshold.", |
| 2359 | "Message": "A temperature sensor is under its critical threshold.", |
| 2360 | "Notes": [ |
| 2361 | "A temperature sensor crossed under its critical threshold value", |
| 2362 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 2363 | ] |
| 2364 | } |
| 2365 | }, |
| 2366 | |
| 2367 | { |
Matt Spinler | 6b3490a | 2021-01-20 10:48:26 -0600 | [diff] [blame] | 2368 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHigh", |
| 2369 | "Subsystem": "power", |
| 2370 | "ComponentID": "0x2800", |
| 2371 | "Severity": "predictive", |
| 2372 | "ActionFlags": ["service_action", "report"], |
| 2373 | |
| 2374 | "SRC": { |
| 2375 | "ReasonCode": "0x2807", |
| 2376 | "Words6To9": {} |
| 2377 | }, |
| 2378 | |
| 2379 | "Callouts": [ |
| 2380 | { |
| 2381 | "CalloutList": [ |
| 2382 | { |
| 2383 | "Priority": "high", |
| 2384 | "SymbolicFRU": "ambient_temp" |
| 2385 | } |
| 2386 | ] |
| 2387 | } |
| 2388 | ], |
| 2389 | |
| 2390 | "Documentation": { |
| 2391 | "Description": "The ambient temperature passed the EPOW3 limit.", |
| 2392 | "Message": "The ambient temperature passed the EPOW3 limit. The system will shut down if temp doesn't decrease.", |
| 2393 | "Notes": [ |
| 2394 | "This error occurs when the ambient temperature surpassed", |
| 2395 | "the EPOW3 shutdown limit." |
| 2396 | ] |
| 2397 | } |
| 2398 | }, |
| 2399 | |
| 2400 | { |
| 2401 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHighClear", |
| 2402 | "Subsystem": "power", |
| 2403 | "ComponentID": "0x2800", |
| 2404 | "Severity": "non_error", |
| 2405 | "ActionFlags": ["report"], |
| 2406 | "EventType": "env_normal", |
| 2407 | |
| 2408 | "SRC": { |
| 2409 | "ReasonCode": "0x2808", |
| 2410 | "Words6To9": {} |
| 2411 | }, |
| 2412 | |
| 2413 | "Callouts": [ |
| 2414 | { |
| 2415 | "CalloutList": [ |
| 2416 | { |
| 2417 | "Priority": "high", |
| 2418 | "SymbolicFRU": "ambient_temp_back" |
| 2419 | } |
| 2420 | ] |
| 2421 | } |
| 2422 | ], |
| 2423 | |
| 2424 | "Documentation": { |
| 2425 | "Description": "The ambient temperature is back under the EPOW3 limit.", |
| 2426 | "Message": "The ambient temperature is back under the EPOW3 limit." |
| 2427 | } |
| 2428 | }, |
| 2429 | |
| 2430 | { |
| 2431 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.HardShutdownAlarmHigh", |
| 2432 | "Subsystem": "power", |
| 2433 | "ComponentID": "0x2800", |
Matt Spinler | 6b3490a | 2021-01-20 10:48:26 -0600 | [diff] [blame] | 2434 | "ActionFlags": ["service_action", "report"], |
| 2435 | |
| 2436 | "SRC": { |
| 2437 | "ReasonCode": "0x2809", |
| 2438 | "Words6To9": {} |
| 2439 | }, |
| 2440 | |
| 2441 | "Callouts": [ |
| 2442 | { |
| 2443 | "CalloutList": [ |
| 2444 | { |
| 2445 | "Priority": "high", |
| 2446 | "SymbolicFRU": "ambient_temp" |
| 2447 | } |
| 2448 | ] |
| 2449 | } |
| 2450 | ], |
| 2451 | |
| 2452 | "Documentation": { |
| 2453 | "Description": "The ambient temperature passed the EPOW4 limit.", |
| 2454 | "Message": "The ambient temperature passed the EPOW4 limit. The system will shut down", |
| 2455 | "Notes": [ |
| 2456 | "This error occurs when the ambient temperature surpassed", |
| 2457 | "the EPOW4 shutdown limit." |
| 2458 | ] |
| 2459 | } |
| 2460 | }, |
| 2461 | |
| 2462 | { |
Rashmica Gupta | b63f75b | 2021-08-18 20:54:21 +1000 | [diff] [blame] | 2463 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHigh", |
| 2464 | "Subsystem": "ext_env", |
| 2465 | "ComponentID": "0x2800", |
| 2466 | "Severity": "predictive", |
| 2467 | "ActionFlags": ["service_action", "report"], |
| 2468 | |
| 2469 | "SRC": { |
| 2470 | "ReasonCode": "0x280A", |
| 2471 | "Words6To9": {} |
| 2472 | }, |
| 2473 | |
| 2474 | "CalloutsUsingAD": { |
| 2475 | "ADName": "SENSOR_NAME", |
| 2476 | "CalloutsWithTheirADValues": [ |
| 2477 | { |
| 2478 | "ADValue": "/xyz/openbmc_project/sensors/altitude/Altitude", |
| 2479 | "Callouts": [ |
| 2480 | { |
| 2481 | "CalloutList": [ |
| 2482 | { "Priority": "high", "SymbolicFRU": "altitude" } |
| 2483 | ] |
| 2484 | } |
| 2485 | ] |
| 2486 | } |
| 2487 | ] |
| 2488 | }, |
| 2489 | |
| 2490 | "Documentation": { |
| 2491 | "Description": "An altitude sensor exceeded its warning threshold.", |
| 2492 | "Message": "An altitude sensor exceeded its warning threshold.", |
| 2493 | "Notes": [ |
| 2494 | "The virtual altitude sensor crossed its warning threshold value", |
| 2495 | " and a symbolic FRU will be added." |
| 2496 | ] |
| 2497 | } |
| 2498 | }, |
| 2499 | |
| 2500 | { |
| 2501 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHighClear", |
| 2502 | "Subsystem": "ext_env", |
| 2503 | "ComponentID": "0x2800", |
| 2504 | "Severity": "non_error", |
| 2505 | "ActionFlags": ["report"], |
| 2506 | "EventType": "env_normal", |
| 2507 | |
| 2508 | "SRC": { |
| 2509 | "ReasonCode": "0x280B", |
| 2510 | "Words6To9": {} |
| 2511 | }, |
| 2512 | |
| 2513 | "Documentation": { |
| 2514 | "Description": "An altitude sensor is under its warning threshold.", |
| 2515 | "Message": "An altitude sensor is under its warning threshold.", |
| 2516 | "Notes": [ |
| 2517 | "The virtual altitude sensor is under its warning threshold value", |
| 2518 | " and a symbolic FRU will be added." |
| 2519 | ] |
| 2520 | } |
| 2521 | }, |
| 2522 | |
| 2523 | { |
Matt Spinler | 8133134 | 2021-10-05 14:09:56 -0500 | [diff] [blame] | 2524 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLow", |
| 2525 | "Subsystem": "cec_tod", |
| 2526 | "ComponentID": "0x2800", |
| 2527 | "Severity": "predictive", |
| 2528 | "ActionFlags": ["service_action", "report"], |
| 2529 | |
| 2530 | "SRC": { |
| 2531 | "ReasonCode": "0x280C", |
| 2532 | "Words6To9": {} |
| 2533 | }, |
| 2534 | |
| 2535 | "CalloutsUsingAD": { |
| 2536 | "ADName": "SENSOR_NAME", |
| 2537 | "CalloutsWithTheirADValues": [ |
| 2538 | { |
| 2539 | "ADValue": "/xyz/openbmc_project/sensors/voltage/Battery_Voltage", |
| 2540 | "Callouts": [ |
| 2541 | { |
| 2542 | "System": "ibm,rainier", |
| 2543 | "CalloutList": [ |
| 2544 | { |
| 2545 | "Priority": "high", |
| 2546 | "LocCode": "P0-E0" |
| 2547 | } |
| 2548 | ] |
| 2549 | }, |
| 2550 | { |
| 2551 | "System": "ibm,everest", |
| 2552 | "CalloutList": [ |
| 2553 | { |
| 2554 | "Priority": "high", |
| 2555 | "LocCode": "P0-C0-E0" |
| 2556 | } |
| 2557 | ] |
| 2558 | } |
| 2559 | ] |
| 2560 | } |
| 2561 | ] |
| 2562 | }, |
| 2563 | |
| 2564 | "Documentation": { |
| 2565 | "Description": "A voltage sensor went below its critical low threshold.", |
| 2566 | "Message": "A voltage sensor went below its critical low threshold." |
| 2567 | } |
| 2568 | }, |
| 2569 | |
| 2570 | { |
| 2571 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLowClear", |
| 2572 | "Subsystem": "cec_tod", |
| 2573 | "ComponentID": "0x2800", |
| 2574 | "Severity": "non_error", |
| 2575 | "ActionFlags": ["report"], |
| 2576 | |
| 2577 | "SRC": { |
| 2578 | "ReasonCode": "0x280D", |
| 2579 | "Words6To9": {} |
| 2580 | }, |
| 2581 | |
| 2582 | "Documentation": { |
| 2583 | "Description": "A voltage sensor is over its critical low threshold.", |
| 2584 | "Message": "A voltage sensor is over its critical low threshold." |
| 2585 | } |
| 2586 | }, |
| 2587 | |
| 2588 | { |
SunnySrivastava1984 | 1ec60ea | 2020-09-03 07:07:25 -0500 | [diff] [blame] | 2589 | "Name": "com.ibm.VPD.Error.InvalidEepromPath", |
| 2590 | "Subsystem": "cec_vpd", |
| 2591 | "ComponentID": "0x4000", |
| 2592 | |
| 2593 | "SRC": { |
| 2594 | "ReasonCode": "0x4000", |
| 2595 | "Words6To9": |
| 2596 | { |
| 2597 | "6": |
| 2598 | { |
| 2599 | "Description": "Errno of the failure.", |
| 2600 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 2601 | } |
| 2602 | } |
| 2603 | }, |
| 2604 | |
| 2605 | "Documentation": { |
| 2606 | "Description": "A path access error ocurred", |
| 2607 | "Message": "An EEPROM path access error occurred.", |
| 2608 | "Notes": [ |
| 2609 | "This error occurs when parser is unable to access", |
| 2610 | "EEPROM path. Errno and device path are captured as", |
| 2611 | "additional data." |
| 2612 | ] |
| 2613 | } |
| 2614 | }, |
| 2615 | |
| 2616 | { |
| 2617 | "Name": "com.ibm.VPD.Error.InvalidVPD", |
| 2618 | "Subsystem": "cec_vpd", |
| 2619 | "ComponentID": "0x4000", |
| 2620 | |
| 2621 | "SRC": { |
| 2622 | "ReasonCode": "0x4001", |
| 2623 | "Words6To9": |
| 2624 | { |
| 2625 | } |
| 2626 | }, |
| 2627 | |
| 2628 | "Documentation": { |
| 2629 | "Description": "Invalid VPD data.", |
| 2630 | "Message": "A VPD data exception occurred.", |
| 2631 | "Notes": [ |
| 2632 | "This error occurs when VPD data is found to be", |
| 2633 | "invalid. This can be when VPD file is missing out", |
| 2634 | "mandatory records.Inventory path is captured in", |
| 2635 | "additional data." |
| 2636 | ] |
| 2637 | } |
| 2638 | }, |
| 2639 | |
| 2640 | { |
| 2641 | "Name": "com.ibm.VPD.Error.EccCheckFailed", |
| 2642 | "Subsystem": "cec_vpd", |
| 2643 | "ComponentID": "0x4000", |
| 2644 | |
| 2645 | "SRC": { |
| 2646 | "ReasonCode": "0x4002", |
| 2647 | "Words6To9": |
| 2648 | { |
| 2649 | } |
| 2650 | }, |
| 2651 | |
| 2652 | "Documentation": { |
| 2653 | "Description": "Invalid VPD ecc data.", |
| 2654 | "Message": "A VPD ecc exception occurred.", |
| 2655 | "Notes": [ |
| 2656 | "This error occurs when VPD ecc check fails for the FRU.", |
| 2657 | "Inventory path for the failed FRU is captured in additonal", |
| 2658 | "data." |
| 2659 | ] |
| 2660 | } |
| 2661 | }, |
| 2662 | |
| 2663 | { |
| 2664 | "Name": "com.ibm.VPD.Error.InvalidJson", |
| 2665 | "Subsystem": "cec_vpd", |
| 2666 | "ComponentID": "0x4000", |
| 2667 | |
| 2668 | "SRC": { |
| 2669 | "ReasonCode": "0x4003", |
| 2670 | "Words6To9": |
| 2671 | { |
| 2672 | } |
| 2673 | }, |
| 2674 | |
| 2675 | "Documentation": { |
| 2676 | "Description": "Invalid Json", |
| 2677 | "Message": "A Json failure occurred.", |
| 2678 | "Notes": [ |
| 2679 | "This error occurs when parser fails to access", |
| 2680 | "Json file or there is any issue with Json data.", |
| 2681 | "Failed Json path and cause of failure is captured", |
| 2682 | "in additional data." |
| 2683 | ] |
| 2684 | } |
| 2685 | }, |
| 2686 | |
| 2687 | { |
| 2688 | "Name": "com.ibm.VPD.Error.BlankSystemVPD", |
| 2689 | "Subsystem": "cec_vpd", |
| 2690 | "ComponentID": "0x4000", |
| 2691 | |
| 2692 | "SRC": { |
| 2693 | "ReasonCode": "0x4004", |
| 2694 | "Words6To9": |
| 2695 | { |
| 2696 | } |
| 2697 | }, |
| 2698 | |
| 2699 | "Documentation": { |
| 2700 | "Description": "System VPD restore failed", |
| 2701 | "Message": "A system VPD restoration error occurred.", |
| 2702 | "Notes": [ |
| 2703 | "This error occurs when restoring of system VPD fails.", |
| 2704 | "The FRU path and reason for failure is captured in", |
| 2705 | "additional data." |
| 2706 | ] |
| 2707 | } |
| 2708 | }, |
| 2709 | |
| 2710 | { |
| 2711 | "Name": "com.ibm.VPD.Error.DbusFailure", |
| 2712 | "Subsystem": "cec_vpd", |
| 2713 | "ComponentID": "0x4000", |
| 2714 | |
| 2715 | "SRC": { |
| 2716 | "ReasonCode": "0x4005", |
| 2717 | "Words6To9": |
| 2718 | { |
| 2719 | } |
| 2720 | }, |
| 2721 | |
| 2722 | "Documentation": { |
| 2723 | "Description": "Dbus exception", |
| 2724 | "Message": "A Dbus internal error occurred.", |
| 2725 | "Notes": [ |
| 2726 | "This error occurs when Dbus operation fails.", |
| 2727 | "Exceptions details are captured in additonal", |
| 2728 | "data." |
| 2729 | ] |
| 2730 | } |
Shantappa Teekappanavar | c3c96d9 | 2021-06-09 23:30:47 -0500 | [diff] [blame] | 2731 | }, |
| 2732 | |
| 2733 | { |
| 2734 | "Name": "org.open_power.Host.Boot.Error.WatchdogTimeout", |
| 2735 | "Subsystem": "cec_sp_hostboot_iface", |
| 2736 | |
| 2737 | "SRC": |
| 2738 | { |
| 2739 | "ReasonCode": "0xC101", |
| 2740 | "Words6To9": |
| 2741 | { |
| 2742 | } |
| 2743 | }, |
| 2744 | |
| 2745 | "Documentation": |
| 2746 | { |
| 2747 | "Description": "Host did not respond within the watchdog timeout interval", |
| 2748 | "Message": "Host did not respond before the watchdog timeout interval expired", |
| 2749 | "Notes": [ |
| 2750 | "Host did not respond before the expiry of the watchdog timeout interval.", |
| 2751 | "Collecting hostboot dump." |
| 2752 | ] |
| 2753 | } |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 2754 | } |
Shantappa Teekappanavar | c3c96d9 | 2021-06-09 23:30:47 -0500 | [diff] [blame] | 2755 | |
Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 2756 | ] |
| 2757 | } |