Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-logging / c30f00a32f1680ff727df784e8ca966482b74019 / . / extensions / openpower-pels / registry / message_registry.json
blob: 795814ae68e2a2f58ee700bacf00afaa92596ed6 [file] [log] [blame]
Matt Spinler44792fd2019-09-26 15:58:58 -0500[diff] [blame]1{
2 "PELs":
3 [
Matt Spinler3fd08d62019-10-22 14:25:33 -0500[diff] [blame]4 {
5 "Name": "xyz.openbmc_project.Common.Error.Timeout",
6 "Subsystem": "bmc_firmware",
Matt Spinler44792fd2019-09-26 15:58:58 -0500[diff] [blame]7
Matt Spinler3fd08d62019-10-22 14:25:33 -0500[diff] [blame]8 "SRC":
9 {
10 "ReasonCode": "0x1001",
11 "Words6To9":
12 {
13 "6":
14 {
15 "Description": "Timeout in ms",
16 "AdditionalDataPropSource": "TIMEOUT_IN_MSEC"
17 }
18 }
19 },
20
21 "Documentation":
22 {
23 "Description": "This is a generic timeout error",
24 "Message": "An operation timed out",
25 "Notes": [
26 "The journal should contain more information"
27 ]
28 }
29 },
30
31 {
32 "Name": "xyz.openbmc_project.Common.Error.InternalFailure",
33 "Subsystem": "bmc_firmware",
34
35 "SRC":
36 {
37 "ReasonCode": "0x1002",
38 "Words6To9":
39 {
40 }
41 },
42
43 "Documentation":
44 {
45 "Description": "BMC code had a generic internal failure",
46 "Message": "An application had an internal failure",
47 "Notes": [
48 "The journal should contain more information"
49 ]
50 }
51 },
52
53 {
54 "Name": "xyz.openbmc_project.Common.Error.InvalidArgument",
55 "Subsystem": "user_error",
56
57 "SRC":
58 {
59 "ReasonCode": "0x1003",
60 "Words6To9":
61 {
62 }
63 },
64
65 "Documentation":
66 {
67 "Description": "BMC code was given an invalid argument",
68 "Message": "Code was given an invalid argument",
69 "Notes": [
70 "The journal should contain more information"
71 ]
72 }
73 },
74 {
75 "Name": "xyz.openbmc_project.Common.Error.InsufficientPermission",
76 "Subsystem": "user_error",
77
78 "SRC":
79 {
80 "ReasonCode": "0x1004",
81 "Words6To9":
82 {
83 }
84 },
85
86 "Documentation":
87 {
88 "Description": "An operation failed due to insufficient permission",
89 "Message": "An operation failed due to unsufficient permission",
90 "Notes": [
91 "The journal should contain more information"
92 ]
93 }
94 },
95
96 {
97 "Name": "xyz.openbmc_project.Common.Error.NotAllowed",
98 "Subsystem": "user_error",
99
100 "SRC":
101 {
102 "ReasonCode": "0x1005",
103 "Words6To9":
104 {
105 }
106 },
107
108 "Documentation":
109 {
110 "Description": "An operation failed because it isn't allowed",
Matt Spinler26958762020-08-27 13:21:23 -0500[diff] [blame]111 "Message": "An operation failed because it isn't allowed",
Matt Spinler3fd08d62019-10-22 14:25:33 -0500[diff] [blame]112 "Notes": [
113 "The journal should contain more information"
114 ]
115 }
116 },
117
118 {
119 "Name": "xyz.openbmc_project.Common.Error.NoCACertificate",
120 "Subsystem": "user_error",
121
122 "SRC":
123 {
124 "ReasonCode": "0x1006",
125 "Words6To9":
126 {
127 }
128 },
129
130 "Documentation":
131 {
132 "Description": "The server's CA certificate has not been provided",
133 "Message": "The server's CA certificate has not been provided"
134 }
Matt Spinler05c2c6c2019-12-18 14:02:09 -0600[diff] [blame]135 },
136
137 {
Matt Spinleraf036b12020-06-25 10:53:52 -0500[diff] [blame]138 "Name": "xyz.openbmc_project.Sensor.Device.Error.ReadFailure",
139 "Subsystem": "cec_chip_iface",
140
141 "SRC":
142 {
143 "ReasonCode": "0x1007",
144 "Words6To9":
145 {
146 "6":
147 {
148 "Description": "errno of the failure",
149 "AdditionalDataPropSource": "CALLOUT_ERRNO"
150 }
151 }
152 },
153
154 "Documentation":
155 {
156 "Description": "Sensor device read failure",
157 "Message": "There was a failure when reading a sensor device",
158 "Notes": [
159 "The severity is set by the creator.",
160 "The action flags are set automatically by the code.",
161 "Callouts added based on CALLOUT_DEVICE_PATH."
162 ]
163 }
164 },
165
166 {
167 "Name": "xyz.openbmc_project.Common.Device.Error.ReadFailure",
168 "Subsystem": "cec_chip_iface",
169
170 "SRC":
171 {
172 "ReasonCode": "0x1008",
173 "Words6To9":
174 {
175 "6":
176 {
177 "Description": "errno of the failure",
178 "AdditionalDataPropSource": "CALLOUT_ERRNO"
179 }
180 }
181 },
182
183 "Documentation":
184 {
185 "Description": "Device read failure",
186 "Message": "There was a failure when reading a hardware device",
187 "Notes": [
188 "The severity is set by the creator.",
189 "The action flags are set automatically by the code.",
190 "Callouts added based on CALLOUT_DEVICE_PATH."
191 ]
192 }
193 },
194
195 {
196 "Name": "xyz.openbmc_project.Control.Device.Error.WriteFailure",
197 "Subsystem": "cec_chip_iface",
198
199 "SRC":
200 {
201 "ReasonCode": "0x1009",
202 "Words6To9":
203 {
204 "6":
205 {
206 "Description": "errno of the failure",
207 "AdditionalDataPropSource": "CALLOUT_ERRNO"
208 }
209 }
210 },
211
212 "Documentation":
213 {
214 "Description": "Device write failure",
215 "Message": "There was a failure when writing to a hardware device",
216 "Notes": [
217 "The severity is set by the creator.",
218 "The action flags are set automatically by the code.",
219 "Callouts added based on CALLOUT_DEVICE_PATH"
220 ]
221 }
222 },
223
224 {
225 "Name": "xyz.openbmc_project.Common.Device.Error.WriteFailure",
226 "Subsystem": "cec_chip_iface",
227
228 "SRC":
229 {
230 "ReasonCode": "0x100A",
231 "Words6To9":
232 {
233 "6":
234 {
235 "Description": "errno of the failure",
236 "AdditionalDataPropSource": "CALLOUT_ERRNO"
237 }
238 }
239 },
240
241 "Documentation":
242 {
243 "Description": "Device write failure",
244 "Message": "There was a failure when writing to a hardware device",
245 "Notes": [
246 "The severity is set by the creator.",
247 "The action flags are set automatically by the code.",
248 "Callouts added based on CALLOUT_DEVICE_PATH"
249 ]
250 }
251 },
Jayanth Othayothbd0a7522021-05-03 02:05:36 -0500[diff] [blame]252
Matt Spinleraf036b12020-06-25 10:53:52 -0500[diff] [blame]253 {
Matt Spinler05c2c6c2019-12-18 14:02:09 -0600[diff] [blame]254 "Name": "org.open_power.Logging.Error.SentBadPELToHost",
255 "Subsystem": "bmc_firmware",
256 "Severity": "non_error",
257
258 "SRC":
259 {
260 "ReasonCode": "0x2001",
261 "Words6To9":
262 {
263 "6":
264 {
265 "Description": "The bad PEL ID",
266 "AdditionalDataPropSource": "BAD_ID"
267 }
268 }
269 },
270
271 "Documentation":
272 {
273 "Description": "The BMC sent the host a malformed PEL",
274 "Message": "The BMC sent the host a malformed PEL",
275 "Notes": [
276 "The host firmware rejected that PEL."
277 ]
278 }
Matt Spinlere95fd012020-01-07 12:53:16 -0600[diff] [blame]279 },
280
281 {
282 "Name": "org.open_power.Logging.Error.BadHostPEL",
283 "Subsystem": "platform_firmware",
284 "Severity": "unrecoverable",
285
286 "SRC":
287 {
288 "ReasonCode": "0x2002",
289 "Words6To9":
290 {
291 "6":
292 {
293 "Description": "The PLID of the invalid PEL",
294 "AdditionalDataPropSource": "PLID"
295 },
296 "7":
297 {
298 "Description": "The corresponding OpenBMC event log ID",
299 "AdditionalDataPropSource": "OBMC_LOG_ID"
300 },
301 "8":
302 {
303 "Description": "The size of the invalid PEL",
304 "AdditionalDataPropSource": "PEL_SIZE"
305 }
306 }
307 },
308
309 "Documentation":
310 {
311 "Description": "The host sent the BMC an invalid PEL",
312 "Message": "The host sent the BMC an invalid PEL",
313 "Notes": [
314 ]
315 }
Marri Devender Raoead1be22020-03-28 05:50:59 -0500[diff] [blame]316 },
317
318 {
Matt Spinler3477ce92020-07-08 14:49:25 -0500[diff] [blame]319 "Name": "org.open_power.Logging.Error.TestError1",
320 "Subsystem": "platform_firmware",
321 "Severity": "unrecoverable",
322
323 "SRC":
324 {
325 "ReasonCode": "0x2003",
326 "Words6To9":
327 {
328 }
329 },
330
331 "Callouts": [
332 {
333 "CalloutList": [
334 {"Priority": "high", "Procedure": "bmc_code"},
335 {"Priority": "medium", "SymbolicFRU": "service_docs"}
336 ]
337 }
338 ],
339
340 "Documentation":
341 {
342 "Description": "An error for testing",
343 "Message": "This is a test error"
344 }
345 },
346
347 {
Matt Spinler30ddc9f2020-07-16 15:39:59 -0500[diff] [blame]348 "Name": "xyz.openbmc_project.Logging.Error.Default",
349 "Subsystem": "other_na",
350
351 "SRC":
352 {
353 "ReasonCode": "0x2004",
354 "Words6To9":
355 {
356 }
357 },
358
359 "Documentation":
360 {
361 "Description": "This entry is used when no other matching entry is found",
362 "Message": "Unknown (Original event not in message registry)",
363 "Notes": [
364 "This is used when the actual error name isn't found in ",
365 "the registry. The original error name will be stored ",
366 "in the UserData section that contains the AdditionalData ",
367 "properties using the key ERROR_NAME.",
368 "This error may contain callouts if the creator passed ",
369 "them in.",
370 "The severity is set by the creator.",
371 "If this error is seen, then a code change needs to be ",
372 "made to add the missing error entry to this registry."
373 ]
374 }
375 },
376
377 {
Marri Devender Raoead1be22020-03-28 05:50:59 -0500[diff] [blame]378 "Name": "org.open_power.PHAL.Error.Boot",
379 "Subsystem": "cec_hardware",
Ramesh Iyyar41e79dc2020-12-22 06:27:48 -0600[diff] [blame]380 "ComponentID": "0x3000",
Marri Devender Raoead1be22020-03-28 05:50:59 -0500[diff] [blame]381 "Severity": "unrecoverable",
382
383 "SRC":
384 {
Ramesh Iyyar41e79dc2020-12-22 06:27:48 -0600[diff] [blame]385 "ReasonCode": "0x3001",
Marri Devender Raoead1be22020-03-28 05:50:59 -0500[diff] [blame]386 "Words6To9":
387 {
388 }
389 },
390
391 "Documentation":
392 {
393 "Description": "Failure occured during boot process",
394 "Message": "Failure occured during boot process",
395 "Notes": [
396 "Debug traces will be captured in AdditionalData section"
397 ]
398 }
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]399 },
400
401 {
Ramesh Iyyar78be2a22020-12-22 06:22:55 -0600[diff] [blame]402 "Name": "org.open_power.PHAL.Error.PrePowerOff",
403 "Subsystem": "cec_hardware",
404 "ComponentID": "0x3000",
405
406 "SRC":
407 {
408 "ReasonCode": "0x3002",
409 "Words6To9":
410 {
411 }
412 },
413
414 "Documentation":
415 {
416 "Description": "Failure occurred during PHAL pre-poweroff operations",
417 "Message": "Failure occurred during PHAL pre-poweroff operations",
418 "Notes": [
419 "Severity needs to be set based on needs for this registry.",
420 "FFDC (First Failure Data Collection) will be collected ",
421 "and added into PEL."
422 ]
423 }
424 },
425
426 {
Jayanth Othayothdb00d762021-07-13 02:48:19 -0500[diff] [blame]427 "Name": "org.open_power.PHAL.Error.devtreeSync",
428 "Subsystem": "cec_hardware",
429 "ComponentID": "0x3000",
430 "Severity": "unrecoverable",
431
432 "SRC":
433 {
434 "ReasonCode": "0x3003",
435 "Words6To9":
436 {
437 }
438 },
439
440 "Documentation":
441 {
442 "Description": "Failure occurred during PHAL devtree sync ",
443 "Message": "Failure occurred during PHAL devtree sync",
444 "Notes": [
445 "The journal should contain more information"
446 ]
447 }
448 },
449
450 {
Jayanth Othayothf3e619a2021-07-13 03:58:06 -0500[diff] [blame]451 "Name": "org.open_power.PHAL.Error.devtreeBackup",
452 "Subsystem": "cec_hardware",
453 "ComponentID": "0x3000",
454 "Severity": "unrecoverable",
455
456 "SRC":
457 {
458 "ReasonCode": "0x3004",
459 "Words6To9":
460 {
461 }
462 },
463
464 "Documentation":
465 {
466 "Description": "Failure occurred during PHAL devtree backup ",
467 "Message": "Failure occurred during PHAL devtree backup",
468 "Notes": [
469 "The journal should contain more information"
470 ]
471 }
472 },
473
474 {
Andrew Geisslerd54fd732021-07-20 14:07:12 -0400[diff] [blame]475 "Name": "org.open_power.PHAL.Error.HostRunning",
476 "Subsystem": "cec_sp_hostboot_iface",
477 "ComponentID": "0x3000",
478
479 "SRC":
480 {
481 "ReasonCode": "0x3005",
482 "Words6To9":
483 {
484 }
485 },
486
487 "Documentation":
488 {
489 "Description": "Host did not respond to BMC after a BMC reset",
490 "Message": "Host did not respond to BMC after a BMC reset but hardware indicates it is running",
491 "Notes": [
492 "System will be left in its current state to ensure host ",
493 "is not unexpectedly taken down. There is most likely an ",
494 "issue in the software or hardware communication path ",
495 "between the BMC and the Host firmware.",
496 "A BMC dump will be collected with relevant FFDC."
497 ]
498 }
499 },
500
501 {
Jayanth Othayoth7d2bea72021-11-29 07:26:34 -0600[diff] [blame]502 "Name": "org.open_power.PHAL.Error.devtreeReinit",
503 "Subsystem": "cec_hardware",
504 "ComponentID": "0x3000",
505 "Severity": "unrecoverable",
506
507 "SRC":
508 {
509 "ReasonCode": "0x3006",
510 "Words6To9":
511 {
512 }
513 },
514
515 "Documentation":
516 {
517 "Description": "Failure re-initializing BMC to Host data structure",
518 "Message": "Failure occurred during re-initializing BMC to Host data structure",
519 "Notes": [
520 "The journal should contain more information"
521 ]
522 }
523 },
524
525 {
Ramesh Iyyarb3d45ed2021-12-07 09:18:19 -0600[diff] [blame]526 "Name": "org.open_power.HardwareIsolation.Error",
527 "Subsystem": "cec_hardware",
528 "ComponentID": "0x3100",
529
530 "SRC":
531 {
532 "ReasonCode": "0x3101",
533 "Words6To9":
534 {
535 }
536 },
537
538 "Documentation":
539 {
540 "Description": "Failure occured during hardware isolation operations",
541 "Message": "Failure occured during hardware isolation operations",
542 "Notes": [
543 "Severity needs to be set based on needs for this registry.",
544 "Debug traces will be captured in AdditionalData section"
545 ]
546 }
547 },
548
549 {
Andrew Geissler8034dde2021-09-10 14:43:03 -0500[diff] [blame]550 "Name": "xyz.openbmc_project.State.Error.HostNotRunning",
551 "Subsystem": "cec_sp_hostboot_iface",
552 "ComponentID": "0x3400",
553 "SRC":
554 {
555 "ReasonCode": "0x3401",
556 "Words6To9":
557 {
558 }
559 },
560 "Documentation":
561 {
562 "Description": "Host was booting or booted before BMC reset but is now unresponsive",
563 "Message": "Host did not respond to BMC after a BMC reset but it was booting or booted prior to the BMC reboot",
564 "Notes": [
565 "System will follow recovery policy, resulting in this ",
566 "error and most likely a a reboot of the host. The issue ",
567 "is most likely the result of the BMC rebooting while the ",
568 "host was booting and in a state where it still needed ",
569 "the BMC to complete its boot."
570 ]
571 }
572 },
573
574 {
Jayanth Othayothbd0a7522021-05-03 02:05:36 -0500[diff] [blame]575 "Name": "org.open_power.Processor.Error.SbeChipOpFailure",
576 "Subsystem": "processor_chip",
577 "ComponentID": "0x3500",
578
579 "SRC":
580 {
581 "ReasonCode": "0x3500",
582 "Words6To9":
583 {
584 "6":
585 {
586 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
587 "AdditionalDataPropSource": "SRC6"
588 }
589 }
590 },
591
592 "Documentation":
593 {
594 "Description": "chipop failure with SBE provided FFDC",
595 "Message": "chipop request failure reported by SBE",
596 "Notes": [
597 "The severity is set by the creator.",
598 "Callouts added based on SBE provided FFDC.",
599 "SBE provided additional debug data included as part of the",
600 "additional user data section."
601 ]
602 }
603 },
604
605 {
Jayanth Othayoth4f6b7632021-05-03 02:36:18 -0500[diff] [blame]606 "Name": "org.open_power.Processor.Error.SbeChipOpTimeout",
607 "Subsystem": "processor_chip",
608 "ComponentID": "0x3500",
609
610 "SRC":
611 {
612 "ReasonCode": "0x3501",
613 "Words6To9":
614 {
615 "6":
616 {
617 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
618 "AdditionalDataPropSource": "SRC6"
619 }
620 }
621 },
622
623 "Documentation":
624 {
625 "Description": "SBE chipop timeout",
626 "Message": "chipop timeout reported during SBE communication",
627 "Notes": [
628 "The severity is set by the creator.",
629 "Check SBE Dump associated to this error to debug the failure."
630 ]
631 }
632 },
633
634 {
Jayanth Othayoth6c601832021-05-03 02:56:04 -0500[diff] [blame]635 "Name": "org.open_power.Processor.Error.SbeChipOpInvalidState",
636 "Subsystem": "processor_chip",
637 "ComponentID": "0x3500",
638
639 "SRC":
640 {
641 "ReasonCode": "0x3502",
642 "Words6To9":
643 {
644 "6":
645 {
646 "Description": "[0:15] chip position, [16:23] command class, [24:31] command type",
647 "AdditionalDataPropSource": "SRC6"
648 },
649 "7":
650 {
651 "Description": "Value of SBE state",
652 "AdditionalDataPropSource": "SRC7"
653 }
654 }
655 },
656
657 "Documentation":
658 {
659 "Description": "The SBE on this processor is not in a state where chipOps can be issued",
660 "Message": "SBE Chipop is not allowed due to invalid SBE state ",
661 "Notes": [
662 "The severity is set by the creator."
663 ]
664 }
665 },
666
667 {
Jayanth Othayothabc88b02021-09-19 06:07:22 -0500[diff] [blame]668 "Name": "org.open_power.Processor.Error.SbeBootFailure",
669 "Subsystem": "processor_chip",
670 "ComponentID": "0x3500",
671
672 "SRC":
673 {
674 "ReasonCode": "0x3503",
675 "Words6To9":
676 {
677 "6":
678 {
679 "Description": "[0:15] chip position",
680 "AdditionalDataPropSource": "SRC6"
681 }
682 }
683 },
684
685 "Documentation":
686 {
687 "Description": "Boot failure with SBE provided FFDC",
688 "Message": "Boot failure reported by SBE",
689 "Notes": [
690 "The severity is set by the creator.",
691 "Callouts added based on SBE provided FFDC.",
692 "SBE provided additional debug data included as part of the",
693 "additional user data section."
694 ]
695 }
696 },
697
698 {
Jayanth Othayothfd0cf4f2021-09-19 06:16:54 -0500[diff] [blame]699 "Name": "org.open_power.Processor.Error.SbeBootTimeout",
700 "Subsystem": "processor_chip",
701 "ComponentID": "0x3500",
702
703 "SRC":
704 {
705 "ReasonCode": "0x3504",
706 "Words6To9":
707 {
708 }
709 },
710
711 "Documentation":
712 {
713 "Description": "SBE Boot timeout",
714 "Message": "timeout reported during SBE boot process",
715 "Notes": [
716 "The severity is set by the creator.",
717 "Check SBE Dump associated to this error to debug the failure."
718 ]
719 }
720 },
721
722 {
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]723 "Name": "org.open_power.Attn.Error.Terminate",
Ben Tyner808e29f2021-04-16 08:32:23 -0500[diff] [blame]724 "Subsystem": "cec_hardware",
725 "Severity": "non_error",
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]726
727 "SRC":
728 {
729 "ReasonCode": "0xD138",
Ben Tyner808e29f2021-04-16 08:32:23 -0500[diff] [blame]730 "SymptomIDFields": [ "SRCWord3", "SRCWord4", "SRCWord5", "SRCWord6", "SRCWord7", "SRCWord8", "SRCWord9" ],
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]731 "Words6To9":
732 {
733 }
734 },
735
736 "Documentation":
737 {
738 "Description": "Status shows TI special attention active",
739 "Message": "TI special attention detected",
740 "Notes": [
741 "This entry is for any TI special attention event ",
742 "reported by the attention handler component"
743 ]
744 }
745 },
746
747 {
748 "Name": "org.open_power.Attn.Error.Fail",
749 "Subsystem": "bmc_firmware",
750 "Severity": "unrecoverable_loss_of_function",
751
752 "SRC":
753 {
754 "ReasonCode": "0xD13E",
755 "Words6To9":
756 {
757 "6":
758 {
759 "Description": "Error code from attention handler",
760 "AdditionalDataPropSource": "ERROR_CODE"
761 }
762 }
763 },
764 "Documentation":
765 {
766 "Description": "The attention handler encountered an error",
767 "MessageArgSources" : ["SRCWord6"],
768 "Message": "Attention handler error %1",
769 "Notes": [
770 "Attention handler will provide error code"
771 ]
772 }
773 },
774
775 {
776 "Name": "org.open_power.Attn.Error.Vital",
777 "Subsystem": "processor_chip",
778 "Severity": "critical",
779
780 "SRC":
781 {
782 "ReasonCode": "0xD16D",
783 "Words6To9":
784 {
785 }
786 },
787
788 "Documentation":
789 {
790 "Description": "Status shows SBE vital attention active",
791 "Message": "SBE vital attention detected",
792 "Notes": [
793 "This entry is for any SBE vital attention event ",
794 "reported by the attention handler component"
795 ]
796 }
797 },
798
799 {
800 "Name": "org.open_power.HwDiags.Error.Checkstop",
801 "Subsystem": "cec_hardware",
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]802 "ActionFlags": [ "service_action", "report", "call_home" ],
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]803
804 "SRC":
805 {
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]806 "ReasonCode": "0xE510",
807 "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ],
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]808 "Words6To9":
809 {
Zane Shelley45ab43a2021-11-13 16:16:57 -0600[diff] [blame]810 "6":
811 {
812 "AdditionalDataPropSource": "SRC6"
813 },
814 "7":
815 {
816 "AdditionalDataPropSource": "SRC7"
817 },
818 "8":
819 {
820 "AdditionalDataPropSource": "SRC8"
821 }
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]822 }
823 },
824
825 "Documentation":
826 {
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]827 "Description": "A system checkstop attention has occurred",
828 "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ],
Zane Shelley45ab43a2021-11-13 16:16:57 -0600[diff] [blame]829 "Message": "Error Signature: %1 %2 %3"
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]830 }
831 },
832
833 {
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]834 "Name": "org.open_power.HwDiags.Error.Predictive",
835 "Subsystem": "cec_hardware",
836 "ActionFlags": [ "service_action", "report", "call_home" ],
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]837
838 "SRC":
839 {
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]840 "ReasonCode": "0xE511",
841 "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ],
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]842 "Words6To9":
843 {
Zane Shelley45ab43a2021-11-13 16:16:57 -0600[diff] [blame]844 "6":
845 {
846 "AdditionalDataPropSource": "SRC6"
847 },
848 "7":
849 {
850 "AdditionalDataPropSource": "SRC7"
851 },
852 "8":
853 {
854 "AdditionalDataPropSource": "SRC8"
855 }
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]856 }
857 },
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]858
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]859 "Documentation":
860 {
Zane Shelley561c0382020-11-17 13:20:05 -0600[diff] [blame]861 "Description": "A hardware attention requiring service has occurred",
862 "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ],
Zane Shelley45ab43a2021-11-13 16:16:57 -0600[diff] [blame]863 "Message": "Error Signature: %1 %2 %3"
Ben Tyner34836322020-04-15 17:01:48 -0500[diff] [blame]864 }
Shawn McCarney01648f52020-06-25 11:42:02 -0500[diff] [blame]865 },
866
867 {
Brandon Wyman38caaf02020-09-01 16:07:42 -0500[diff] [blame]868 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.InputFault",
869 "Subsystem": "power_supply",
870 "Severity": "unrecoverable_redundancy_loss",
871 "ActionFlags": ["service_action", "report"],
872 "ComponentID": "0x2700",
873
874 "SRC": {
875 "Type": "11",
876 "ReasonCode": "0x15F0",
877 "Words6To9": {}
878 },
879
880 "Callouts": [
881 {
882 "CalloutList": [
883 { "Priority": "high", "SymbolicFRU": "pwrsply" }
884 ]
885 }
886 ],
887
888 "Documentation": {
889 "Description": "Power Supply input power fault",
890 "Message": "A power supply has indicated an input or under voltage condition.",
891 "Notes": [
892 "Check the power supply cabling and/or input power ",
893 "source. The PWRSPLY procedure is used rather than ",
894 "calling out a location code, as typically these faults ",
895 "are related to the supplied power, the cable, or the ",
896 "cable connectors. If the input fault resolves down to an ",
897 "issue with the power supply itself, the power supply ",
898 "indicating this input fault should be called out. Add the ",
899 "CALLOUT_INVENTORY_PATH to the additional data, and set the",
900 "CALLOUT_PRIORITY to something other than high."
901 ]
902 }
903 },
904
905 {
906 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Fault",
907 "Subsystem": "power_supply",
908 "Severity": "unrecoverable_redundancy_loss",
909 "ActionFlags": ["service_action", "report", "call_home"],
910 "ComponentID": "0x2700",
911
912 "SRC": {
913 "Type": "11",
914 "ReasonCode": "0x15F1",
915 "Words6To9": {}
916 },
917
918 "Documentation": {
919 "Description": "Power Supply power fault",
920 "Message": "The power supply detected a fault condition, see AdditionalData for further details.",
921 "Notes": [
922 "The power supply reporting the fault should be called ",
923 "out using the CALLOUT_INVENTORY_PATH keyword. Include ",
924 "specific fault, STATUS_* details, and code level in the ",
925 "AdditionalData section."
926 ]
927 }
928 },
929
930 {
931 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.CommFault",
932 "Subsystem": "power_supply",
Brandon Wyman981ffc32021-04-06 15:49:12 -0500[diff] [blame]933 "Severity": "unrecoverable",
Brandon Wyman38caaf02020-09-01 16:07:42 -0500[diff] [blame]934 "ActionFlags": ["service_action", "report", "call_home"],
935 "ComponentID": "0x2700",
936
937 "SRC": {
938 "Type": "11",
939 "ReasonCode": "0x15F2",
940 "Words6To9": {}
941 },
942
943 "Documentation": {
944 "Description": "Power Supply non-power fault",
945 "Message": "A communication failure occurred talking to the power supply",
946 "Notes": [
947 "Communication problems with the power supply could be ",
948 "the power supply, or any hardware between it and the ",
949 "BMC. Reporting the error should be passing in a call ",
950 "out using CALLOUT_DEVICE_PATH."
951 ]
952 }
953 },
954
955 {
956 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Missing",
957 "Subsystem": "power_supply",
Brandon Wyman981ffc32021-04-06 15:49:12 -0500[diff] [blame]958 "Severity": "unrecoverable_redundancy_loss",
Brandon Wyman38caaf02020-09-01 16:07:42 -0500[diff] [blame]959 "ActionFlags": ["service_action", "report", "call_home"],
960 "ComponentID": "0x2700",
961
962 "SRC": {
963 "Type": "11",
964 "ReasonCode": "0x15F6",
965 "Words6To9": {}
966 },
967
968 "Callouts": [
969 {
970 "CalloutList": [
Matt Spinler80600192020-10-23 09:29:33 -0500[diff] [blame]971 {
972 "Priority": "high",
973 "SymbolicFRUTrusted": "pwrsply",
974 "UseInventoryLocCode": true
975 }
Brandon Wyman38caaf02020-09-01 16:07:42 -0500[diff] [blame]976 ]
977 }
978 ],
979
980 "Documentation": {
981 "Description": "Power Supply is missing",
982 "Message": "A power supply that should be present is missing",
983 "Notes": [
984 "The CalloutList should use the PWRSPLY symbolic FRU ",
Matt Spinler80600192020-10-23 09:29:33 -0500[diff] [blame]985 "with the trusted location code property. The ",
986 "location code in this callout is obtained from ",
987 "the passed in CALLOUT_INVENTORY_PATH value."
Brandon Wyman38caaf02020-09-01 16:07:42 -0500[diff] [blame]988 ]
989 }
990 },
991
992 {
Adriana Kobylak5c0c9172021-04-07 18:26:56 +0000[diff] [blame]993 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.NotSupported",
994 "Subsystem": "power_supply",
995 "Severity": "unrecoverable",
996 "ActionFlags": ["service_action", "report", "call_home"],
997 "ComponentID": "0x2700",
998
999 "SRC": {
1000 "Type": "11",
1001 "ReasonCode": "0x15F7",
1002 "Words6To9": {}
1003 },
1004
1005 "Documentation": {
1006 "Description": "Power Supply configuration is not supported",
1007 "Message": "The power supply configuration is not supported",
1008 "Notes": [
1009 "The combination of power supplies detected in the ",
1010 "system is not supported. This could be caused by ",
1011 "mismatched models, less than expected number of power ",
1012 "supplies, or other unsupported characteristics."
1013 ]
1014 }
1015 },
1016
1017 {
Brandon Wymanc30f00a2021-11-18 21:10:04 +0000[diff] [blame^]1018 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.FanFault",
1019 "Subsystem": "power_supply",
1020 "Severity": "unrecoverable",
1021 "ActionFlags": ["service_action", "report", "call_home"],
1022 "ComponentID": "0x2700",
1023
1024 "SRC": {
1025 "Type": "11",
1026 "ReasonCode": "0x15FF",
1027 "Words6To9": {}
1028 },
1029
1030 "Documentation": {
1031 "Description": "Power Supply fan fault",
1032 "Message": "A power supply indicated a fan fault has occurred",
1033 "Notes": [
1034 "The power supply reporting the fault should be called ",
1035 "out using the CALLOUT_INVENTORY_PATH keyword. Include ",
1036 "specific fault, STATUS_* details, and code level in the ",
1037 "AdditionalData section."
1038 ]
1039 }
1040 },
1041
1042 {
Brandon Wyman90c88402021-11-16 20:34:49 +0000[diff] [blame]1043 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.IoutOCFault",
1044 "Subsystem": "power_supply",
1045 "Severity": "unrecoverable_redundancy_loss",
1046 "ActionFlags": ["service_action", "report", "call_home"],
1047 "ComponentID": "0x2700",
1048
1049 "SRC": {
1050 "Type": "11",
1051 "ReasonCode": "0x1B01",
1052 "Words6To9": {}
1053 },
1054
1055 "Callouts": [
1056 {
1057 "CalloutList": [
1058 { "Priority": "high", "Procedure": "power_overcurrent" }
1059 ]
1060 }
1061 ],
1062
1063 "Documentation": {
1064 "Description": "Power Supply output over-current power fault",
1065 "Message": "A power supply has indicated an output over-current condition."
1066 }
1067 },
1068
1069 {
Jay Meyer54ff54e2021-03-14 20:18:41 -0500[diff] [blame]1070 "Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Blackout",
1071 "Subsystem": "power",
1072 "ActionFlags": [ "report", "service_action" ],
1073 "Severity": "unrecoverable",
1074 "ComponentID": "0x2700",
1075
1076 "SRC":
1077 {
1078 "Type": "11",
1079 "ReasonCode": "0x00AC",
1080 "Words6To9": {},
1081 "PowerFault": true
1082 },
1083
1084 "Callouts": [
1085 {
1086 "CalloutList": [
1087 { "Priority": "high", "SymbolicFRU": "ac_module"}
1088 ]
1089 }
1090 ],
1091
1092 "Documentation": {
1093 "Description": "Input power was lost while the system was powered on.",
1094 "Message": "Input power was lost while the system was powered on.",
1095 "Notes": [
1096 "Input power was lost while system powered on.",
1097 "The CalloutList should use the ACMODUL symbolic FRU."
1098 ]
1099 }
1100 },
1101
1102 {
Brandon Wyman002d8cf2021-12-01 23:05:11 +0000[diff] [blame]1103 "Name": "xyz.openbmc_project.Power.PowerSupply.Error.PSKillFault",
1104 "Subsystem": "power_supply",
1105 "Severity": "unrecoverable",
1106 "ActionFlags": ["service_action", "report", "call_home"],
1107 "ComponentID": "0x2700",
1108
1109 "SRC": {
1110 "Type": "11",
1111 "ReasonCode": "0x2500",
1112 "Words6To9": {},
1113 "PowerFault": true
1114 },
1115
1116 "Callouts": [
1117 {
1118 "CalloutList": [
1119 { "Priority": "high", "Procedure": "power_overcurrent" }
1120 ]
1121 }
1122 ],
1123
1124 "Documentation": {
1125 "Description": "A power supply fault is potentially preventing the power supply from allowing the system to power on.",
1126 "Message": "Power supply PSKill_fault",
1127 "Notes": [
1128 ]
1129 }
1130 },
1131
1132 {
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1133 "Name": "xyz.openbmc_project.Power.Error.Shutdown",
1134 "Subsystem": "power_sequencer",
1135 "ComponentID": "0x2700",
1136
1137 "SRC": {
1138 "Type": "11",
1139 "ReasonCode": "0x2600",
1140 "Words6To9": {}
1141 },
1142
1143 "Callouts": [
1144 {
1145 "CalloutList": [
1146 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1147 ]
1148 }
1149 ],
1150
1151 "Documentation": {
1152 "Description": "A power off was issued because a power fault was detected",
1153 "Message": "A power off was issued because a power fault was detected",
1154 "Notes": [
1155 ]
1156 }
1157 },
1158
1159 {
Ben Tyner0273a222021-07-12 15:18:13 -0500[diff] [blame]1160 "Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Regulator",
1161 "Subsystem": "power_control_hw",
1162 "ComponentID": "0x2700",
1163
1164 "SRC": {
1165 "Type": "11",
1166 "ReasonCode": "0x2602",
1167 "Words6To9": {},
1168 "PowerFault": true
1169 },
1170
1171 "Callouts": [
1172 {
1173 "System": "ibm,rainier",
1174 "CalloutList": [
1175 {
1176 "Priority": "high",
1177 "LocCode": "P0-C5"
1178 },
1179 {
1180 "Priority": "medium",
1181 "LocCode": "P0"
1182 }
1183 ]
1184 },
1185 {
1186 "System": "ibm,everest",
1187 "CalloutList": [
1188 {
1189 "Priority": "high",
1190 "LocCode": "P0-C59"
1191 },
1192 {
1193 "Priority": "medium",
1194 "LocCode": "P0"
1195 }
1196 ]
1197 }
1198 ],
1199
1200 "Documentation": {
1201 "Description": "A power off was issued because a regulator for standby power faulted",
1202 "Message": "A power off was issued because a regulator for standby power faulted",
1203 "Notes": [
1204 ]
1205 }
1206 },
1207
1208 {
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1209 "Name": "xyz.openbmc_project.Power.Error.PowerSequencerPGOODFault",
1210 "Subsystem": "power_sequencer",
1211 "ComponentID": "0x2700",
1212
1213 "SRC": {
1214 "Type": "11",
1215 "ReasonCode": "0x2610",
1216 "Words6To9": {}
1217 },
1218
1219 "CalloutsUsingAD": {
1220 "ADName": "INPUT_NAME", "CalloutsWithTheirADValues": [
1221 {
1222 "ADValue": "PCIE_SLOT0", "Callouts": [
1223 {
1224 "CalloutList": [
1225 { "Priority": "high", "LocCode": "P0-C0" },
1226 { "Priority": "medium", "LocCode": "P0" }
1227 ]
1228 }
1229 ]
1230 },
1231 {
1232 "ADValue": "PCIE_SLOT1", "Callouts": [
1233 {
1234 "CalloutList": [
1235 { "Priority": "high", "LocCode": "P0-C1" },
1236 { "Priority": "medium", "LocCode": "P0" }
1237 ]
1238 }
1239 ]
1240 },
1241 {
1242 "ADValue": "PCIE_SLOT2", "Callouts": [
1243 {
1244 "CalloutList": [
1245 { "Priority": "high", "LocCode": "P0-C2" },
1246 { "Priority": "medium", "LocCode": "P0" }
1247 ]
1248 }
1249 ]
1250 },
1251 {
1252 "ADValue": "PCIE_SLOT3", "Callouts": [
1253 {
1254 "CalloutList": [
1255 { "Priority": "high", "LocCode": "P0-C3" },
1256 { "Priority": "medium", "LocCode": "P0" }
1257 ]
1258 }
1259 ]
1260 },
1261 {
1262 "ADValue": "PCIE_SLOT4", "Callouts": [
1263 {
1264 "CalloutList": [
1265 { "Priority": "high", "LocCode": "P0-C4" },
1266 { "Priority": "medium", "LocCode": "P0" }
1267 ]
1268 }
1269 ]
1270 },
1271 {
1272 "ADValue": "PCIE_SLOT7", "Callouts": [
1273 {
1274 "CalloutList": [
1275 { "Priority": "high", "LocCode": "P0-C7" },
1276 { "Priority": "medium", "LocCode": "P0" }
1277 ]
1278 }
1279 ]
1280 },
1281 {
1282 "ADValue": "PCIE_SLOT8", "Callouts": [
1283 {
1284 "CalloutList": [
1285 { "Priority": "high", "LocCode": "P0-C8" },
1286 { "Priority": "medium", "LocCode": "P0" }
1287 ]
1288 }
1289 ]
1290 },
1291 {
1292 "ADValue": "PCIE_SLOT9", "Callouts": [
1293 {
1294 "CalloutList": [
1295 { "Priority": "high", "LocCode": "P0-C9" },
1296 { "Priority": "medium", "LocCode": "P0" }
1297 ]
1298 }
1299 ]
1300 },
1301 {
1302 "ADValue": "PCIE_SLOT10", "Callouts": [
1303 {
1304 "CalloutList": [
1305 { "Priority": "high", "LocCode": "P0-C10" },
1306 { "Priority": "medium", "LocCode": "P0" }
1307 ]
1308 }
1309 ]
1310 },
1311 {
1312 "ADValue": "PCIE_SLOT11", "Callouts": [
1313 {
1314 "CalloutList": [
1315 { "Priority": "high", "LocCode": "P0-C11" },
1316 { "Priority": "medium", "LocCode": "P0" }
1317 ]
1318 }
1319 ]
1320 },
1321 {
1322 "ADValue": "PGOOD_12A", "Callouts": [
1323 {
1324 "CalloutList": [
1325 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1326 ]
1327 }
1328 ]
1329 },
1330 {
1331 "ADValue": "PGOOD_12B", "Callouts": [
1332 {
1333 "CalloutList": [
1334 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1335 ]
1336 }
1337 ]
1338 },
1339 {
1340 "ADValue": "PGOOD_12C", "Callouts": [
1341 {
1342 "CalloutList": [
1343 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1344 ]
1345 }
1346 ]
1347 },
1348 {
1349 "ADValue": "PGOOD_12D", "Callouts": [
1350 {
1351 "CalloutList": [
1352 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1353 ]
1354 }
1355 ]
1356 },
1357 {
1358 "ADValue": "PGOOD_12L", "Callouts": [
1359 {
1360 "CalloutList": [
1361 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1362 ]
1363 }
1364 ]
1365 },
1366 {
1367 "ADValue": "PGOOD_12M", "Callouts": [
1368 {
1369 "CalloutList": [
1370 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1371 ]
1372 }
1373 ]
1374 },
1375 {
1376 "ADValue": "PGOOD_12N", "Callouts": [
1377 {
1378 "CalloutList": [
1379 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1380 ]
1381 }
1382 ]
1383 },
1384 {
1385 "ADValue": "PGOOD_12P", "Callouts": [
1386 {
1387 "CalloutList": [
1388 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1389 ]
1390 }
1391 ]
1392 },
1393 {
1394 "ADValue": "PGOOD_12PCIE", "Callouts": [
1395 {
1396 "CalloutList": [
1397 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1398 ]
1399 }
1400 ]
1401 },
1402 {
1403 "ADValue": "PGOOD_12Q", "Callouts": [
1404 {
1405 "CalloutList": [
1406 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1407 ]
1408 }
1409 ]
1410 },
1411 {
1412 "ADValue": "PGOOD_12R", "Callouts": [
1413 {
1414 "CalloutList": [
1415 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1416 ]
1417 }
1418 ]
1419 },
1420 {
1421 "ADValue": "PGOOD_VDN_DCM0", "Callouts": [
1422 {
1423 "CalloutList": [
1424 { "Priority": "high", "LocCode": "P0-C14" },
1425 { "Priority": "medium", "LocCode": "P0-C15" },
1426 { "Priority": "low", "LocCode": "P0" }
1427 ]
1428 }
1429 ]
1430 },
1431 {
1432 "ADValue": "PGOOD_VDN_DCM1", "Callouts": [
1433 {
1434 "CalloutList": [
1435 { "Priority": "high", "LocCode": "P0-C23" },
1436 { "Priority": "medium", "LocCode": "P0-C24" },
1437 { "Priority": "low", "LocCode": "P0" }
1438 ]
1439 }
1440 ]
1441 },
1442 {
1443 "ADValue": "PGOOD_VCS_DCM0", "Callouts": [
1444 {
1445 "CalloutList": [
1446 { "Priority": "high", "LocCode": "P0-C14" },
1447 { "Priority": "medium", "LocCode": "P0-C15" },
1448 { "Priority": "low", "LocCode": "P0" }
1449 ]
1450 }
1451 ]
1452 },
1453 {
1454 "ADValue": "PGOOD_VCS_DCM1", "Callouts": [
1455 {
1456 "CalloutList": [
1457 { "Priority": "high", "LocCode": "P0-C23" },
1458 { "Priority": "medium", "LocCode": "P0-C24" },
1459 { "Priority": "low", "LocCode": "P0" }
1460 ]
1461 }
1462 ]
1463 },
1464 {
1465 "ADValue": "PGOOD_VIO_DCM0", "Callouts": [
1466 {
1467 "CalloutList": [
1468 { "Priority": "high", "LocCode": "P0-C14" },
1469 { "Priority": "medium", "LocCode": "P0-C15" },
1470 { "Priority": "low", "LocCode": "P0" }
1471 ]
1472 }
1473 ]
1474 },
1475 {
1476 "ADValue": "PGOOD_VIO_DCM1", "Callouts": [
1477 {
1478 "CalloutList": [
1479 { "Priority": "high", "LocCode": "P0-C23" },
1480 { "Priority": "medium", "LocCode": "P0-C24" },
1481 { "Priority": "low", "LocCode": "P0" }
1482 ]
1483 }
1484 ]
1485 },
1486 {
1487 "ADValue": "PGOOD_VPCIE_DCM0", "Callouts": [
1488 {
1489 "CalloutList": [
1490 { "Priority": "high", "LocCode": "P0-C14" },
1491 { "Priority": "medium", "LocCode": "P0-C15" },
1492 { "Priority": "low", "LocCode": "P0" }
1493 ]
1494 }
1495 ]
1496 },
1497 {
1498 "ADValue": "PGOOD_VPCIE_DCM1", "Callouts": [
1499 {
1500 "CalloutList": [
1501 { "Priority": "high", "LocCode": "P0-C23" },
1502 { "Priority": "medium", "LocCode": "P0-C24" },
1503 { "Priority": "low", "LocCode": "P0" }
1504 ]
1505 }
1506 ]
1507 }
1508 ]
1509 },
1510
1511 "Documentation": {
1512 "Description": "The power sequencer chip detected a PGOOD fault",
1513 "Message": "The power sequencer chip detected a PGOOD fault",
1514 "Notes": [
1515 ]
1516 }
1517 },
1518
1519 {
1520 "Name": "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault",
1521 "Subsystem": "power_sequencer",
1522 "ComponentID": "0x2700",
1523
1524 "SRC": {
1525 "Type": "11",
1526 "ReasonCode": "0x2620",
1527 "Words6To9": {}
1528 },
1529
1530 "CalloutsUsingAD": {
1531 "ADName": "RAIL_NAME", "CalloutsWithTheirADValues": [
1532 {
1533 "ADValue": "12.0V", "Callouts": [
1534 {
1535 "CalloutList": [
1536 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1537 ]
1538 }
1539 ]
1540 },
1541 {
1542 "ADValue": "5.0V_USB", "Callouts": [
1543 {
1544 "CalloutList": [
1545 { "Priority": "high", "SymbolicFRU": "usb_pgood" },
1546 { "Priority": "medium", "LocCode": "P0" }
1547 ]
1548 }
1549 ]
1550 },
1551 {
1552 "ADValue": "5.0V_DASD", "Callouts": [
1553 {
1554 "CalloutList": [
1555 { "Priority": "medium", "LocCode": "P1" },
1556 { "Priority": "medium", "LocCode": "P2" },
1557 { "Priority": "medium", "LocCode": "P3" },
1558 { "Priority": "low", "LocCode": "P0" }
1559 ]
1560 }
1561 ]
1562 },
1563 {
1564 "ADValue": "3.3VA", "Callouts": [
1565 {
1566 "CalloutList": [
1567 { "Priority": "high", "LocCode": "P0" }
1568 ]
1569 }
1570 ]
1571 },
1572 {
1573 "ADValue": "3.3VB", "Callouts": [
1574 {
1575 "CalloutList": [
1576 { "Priority": "high", "LocCode": "P0" }
1577 ]
1578 }
1579 ]
1580 },
1581 {
1582 "ADValue": "1.5V", "Callouts": [
1583 {
1584 "CalloutList": [
1585 { "Priority": "high", "LocCode": "P0" }
1586 ]
1587 }
1588 ]
1589 },
1590 {
1591 "ADValue": "1.1V", "Callouts": [
1592 {
1593 "CalloutList": [
1594 { "Priority": "high", "LocCode": "P0" }
1595 ]
1596 }
1597 ]
1598 },
1599 {
1600 "ADValue": "VDDA_DCM0", "Callouts": [
1601 {
1602 "CalloutList": [
1603 { "Priority": "high", "LocCode": "P0-C14" },
1604 { "Priority": "medium", "LocCode": "P0-C15" },
1605 { "Priority": "low", "LocCode": "P0" }
1606 ]
1607 }
1608 ]
1609 },
1610 {
1611 "ADValue": "VDDB_DCM0", "Callouts": [
1612 {
1613 "CalloutList": [
1614 { "Priority": "high", "LocCode": "P0-C14" },
1615 { "Priority": "medium", "LocCode": "P0-C15" },
1616 { "Priority": "low", "LocCode": "P0" }
1617 ]
1618 }
1619 ]
1620 },
1621 {
1622 "ADValue": "VDDA_DCM1", "Callouts": [
1623 {
1624 "CalloutList": [
1625 { "Priority": "high", "LocCode": "P0-C23" },
1626 { "Priority": "medium", "LocCode": "P0-C24" },
1627 { "Priority": "low", "LocCode": "P0" }
1628 ]
1629 }
1630 ]
1631 },
1632 {
1633 "ADValue": "VDDB_DCM1", "Callouts": [
1634 {
1635 "CalloutList": [
1636 { "Priority": "high", "LocCode": "P0-C23" },
1637 { "Priority": "medium", "LocCode": "P0-C24" },
1638 { "Priority": "low", "LocCode": "P0" }
1639 ]
1640 }
1641 ]
1642 },
1643 {
1644 "ADValue": "12.0VCS", "Callouts": [
1645 {
1646 "CalloutList": [
1647 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1648 ]
1649 }
1650 ]
1651 },
1652 {
1653 "ADValue": "3.3VCS", "Callouts": [
1654 {
1655 "CalloutList": [
1656 { "Priority": "high", "LocCode": "P0" }
1657 ]
1658 }
1659 ]
1660 },
1661 {
1662 "ADValue": "1.1V_Current", "Callouts": [
1663 {
1664 "CalloutList": [
1665 { "Priority": "high", "LocCode": "P0" }
1666 ]
1667 }
1668 ]
1669 },
1670 {
1671 "ADValue": "5.0V_USB_Current", "Callouts": [
1672 {
1673 "CalloutList": [
1674 { "Priority": "high", "SymbolicFRU": "usb_pgood" },
1675 { "Priority": "medium", "LocCode": "P0" }
1676 ]
1677 }
1678 ]
1679 },
1680 {
1681 "ADValue": "5.0V_DASD_Current", "Callouts": [
1682 {
1683 "CalloutList": [
1684 { "Priority": "medium", "LocCode": "P1" },
1685 { "Priority": "medium", "LocCode": "P2" },
1686 { "Priority": "medium", "LocCode": "P3" },
1687 { "Priority": "low", "LocCode": "P0" }
1688 ]
1689 }
1690 ]
1691 },
1692 {
1693 "ADValue": "12.0VN", "Callouts": [
1694 {
1695 "CalloutList": [
1696 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1697 ]
1698 }
1699 ]
1700 },
1701 {
1702 "ADValue": "12.0VP", "Callouts": [
1703 {
1704 "CalloutList": [
1705 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1706 ]
1707 }
1708 ]
1709 },
1710 {
1711 "ADValue": "12.0VQ", "Callouts": [
1712 {
1713 "CalloutList": [
1714 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1715 ]
1716 }
1717 ]
1718 },
1719 {
1720 "ADValue": "12.0VR", "Callouts": [
1721 {
1722 "CalloutList": [
1723 { "Priority": "high", "SymbolicFRU": "pgood_part" }
1724 ]
1725 }
1726 ]
1727 },
1728 {
1729 "ADValue": "ThermalDiode1", "Callouts": [
1730 {
1731 "CalloutList": [
1732 { "Priority": "high", "LocCode": "P0" }
1733 ]
1734 }
1735 ]
1736 },
1737 {
1738 "ADValue": "ThermalDiode2", "Callouts": [
1739 {
1740 "CalloutList": [
1741 { "Priority": "high", "LocCode": "P0" }
1742 ]
1743 }
1744 ]
1745 },
1746 {
1747 "ADValue": "ThermalDiode3", "Callouts": [
1748 {
1749 "CalloutList": [
1750 { "Priority": "high", "LocCode": "P0" }
1751 ]
1752 }
1753 ]
1754 },
1755 {
1756 "ADValue": "ThermalDiode4", "Callouts": [
1757 {
1758 "CalloutList": [
1759 { "Priority": "high", "LocCode": "P0" }
1760 ]
1761 }
1762 ]
1763 }
1764 ]
1765 },
1766
1767 "Documentation": {
1768 "Description": "The power sequencer chip detected a voltage fault",
1769 "Message": "The power sequencer chip detected a voltage fault",
1770 "Notes": [
1771 ]
1772 }
1773 },
1774
1775 {
Shawn McCarney7f1ec942021-07-28 13:33:34 -0500[diff] [blame]1776 "Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.N",
1777 "Subsystem": "power",
1778 "Severity": "predictive_redundancy_loss",
1779 "ComponentID": "0x2700",
1780
1781 "SRC": {
1782 "Type": "11",
1783 "ReasonCode": "0x2700",
1784 "Words6To9": {}
1785 },
1786
1787 "Documentation": {
1788 "Description": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)",
1789 "Message": "Voltage regulator phase fault detected; device now at redundancy level N (no redundant phases)",
1790 "Notes": [
1791 "CALLOUT_INVENTORY_PATH should be specified in the ",
1792 "AdditionalData property of the event log so that ",
1793 "the device is called out but not the communication path."
1794 ]
1795 }
1796 },
1797
1798 {
1799 "Name": "xyz.openbmc_project.Power.Regulators.Error.PhaseFault.NPlus1",
1800 "Subsystem": "power",
1801 "Severity": "non_error",
1802 "MfgSeverity": "predictive_redundancy_loss",
1803 "ActionFlags": ["report"],
1804 "MfgActionFlags": ["service_action", "report", "call_home"],
1805 "ComponentID": "0x2700",
1806
1807 "SRC": {
1808 "Type": "11",
1809 "ReasonCode": "0x2701",
1810 "Words6To9": {}
1811 },
1812
1813 "Documentation": {
1814 "Description": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)",
1815 "Message": "Voltage regulator phase fault detected; device now at redundancy level N+1 (one redundant phase)",
1816 "Notes": [
1817 "CALLOUT_INVENTORY_PATH should be specified in the ",
1818 "AdditionalData property of the event log so that ",
1819 "the device is called out but not the communication path."
1820 ]
1821 }
1822 },
1823
1824 {
Shawn McCarney01648f52020-06-25 11:42:02 -0500[diff] [blame]1825 "Name": "xyz.openbmc_project.Power.Regulators.Error.WriteVerification",
1826 "Subsystem": "power",
1827 "ComponentID": "0x2700",
1828
1829 "SRC": {
1830 "Type": "11",
1831 "ReasonCode": "0x2900",
1832 "Words6To9": {}
1833 },
1834
1835 "Documentation": {
1836 "Description": "A write verification error occurred on a device",
1837 "Message": "A write verification error occurred on a device",
1838 "Notes": [
1839 "This error occurs when a device register is written, ",
1840 "read back, and the two values do not match. This is ",
1841 "also called a read-back error. The device should be ",
1842 "identified using the CALLOUT_DEVICE_PATH or ",
1843 "CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR keywords in the ",
1844 "AdditionalData property of the event log. This will ",
1845 "cause the device and the hardware in the communication ",
1846 "path to be called out."
1847 ]
1848 }
1849 },
1850
1851 {
1852 "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile",
1853 "Subsystem": "power",
1854 "ComponentID": "0x2700",
1855
1856 "SRC": {
1857 "Type": "11",
1858 "ReasonCode": "0xA013",
1859 "Words6To9": {}
1860 },
1861
1862 "Callouts": [
1863 {
1864 "CalloutList": [
1865 { "Priority": "high", "Procedure": "bmc_code" }
1866 ]
1867 }
1868 ],
1869
1870 "Documentation": {
1871 "Description": "A regulators configuration file error occurred",
1872 "Message": "A regulators configuration file error occurred",
1873 "Notes": [
1874 "The regulators configuration file could not be found, ",
1875 "could not be read, or had invalid contents."
1876 ]
1877 }
1878 },
1879
1880 {
Shawn McCarney82e31d82021-02-19 16:25:55 -0600[diff] [blame]1881 "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile.Critical",
1882 "Subsystem": "power",
1883 "Severity": "critical_system_term",
1884 "ComponentID": "0x2700",
1885
1886 "SRC": {
1887 "Type": "11",
1888 "ReasonCode": "0xA014",
1889 "Words6To9": {},
1890 "PowerFault": true
1891 },
1892
1893 "Callouts": [
1894 {
1895 "CalloutList": [
1896 { "Priority": "high", "Procedure": "bmc_code" }
1897 ]
1898 }
1899 ],
1900
1901 "Documentation": {
1902 "Description": "A critical regulators configuration file error occurred",
1903 "Message": "A critical regulators configuration file error occurred",
1904 "Notes": [
1905 "The regulators configuration file could not be found, ",
1906 "could not be read, or had invalid contents. As a result ",
1907 "voltage regulators could not be configured, and the ",
1908 "chassis could not be powered on."
1909 ]
1910 }
1911 },
1912
1913 {
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1914 "Name": "xyz.openbmc_project.Power.Error.PowerSequencerFault",
1915 "Subsystem": "power_sequencer",
1916 "ComponentID": "0x2700",
1917
1918 "SRC": {
1919 "Type": "11",
1920 "ReasonCode": "0xD000",
1921 "Words6To9": {}
1922 },
1923
1924 "Callouts": [
1925 {
1926 "CalloutList": [
1927 { "Priority": "high", "LocCode": "P0" }
1928 ]
1929 }
1930 ],
1931
1932 "Documentation": {
1933 "Description": "The power sequencer chip detected a fault",
1934 "Message": "The power sequencer chip detected a fault",
1935 "Notes": [
1936 ]
1937 }
1938 },
1939
1940 {
Jim Wrightc1ba04f2021-11-12 15:31:32 -0600[diff] [blame]1941 "Name": "xyz.openbmc_project.Power.Error.PowerOnTimeout",
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1942 "Subsystem": "power_sequencer",
1943 "ComponentID": "0x2700",
Jim Wrightc1ba04f2021-11-12 15:31:32 -0600[diff] [blame]1944 "Severity": "critical",
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1945
1946 "SRC": {
1947 "Type": "11",
1948 "ReasonCode": "0xD002",
1949 "Words6To9": {}
1950 },
1951
1952 "Callouts": [
1953 {
1954 "CalloutList": [
1955 { "Priority": "high", "LocCode": "P0" }
1956 ]
1957 }
1958 ],
1959
1960 "Documentation": {
Jim Wrightc1ba04f2021-11-12 15:31:32 -0600[diff] [blame]1961 "Description": "System power failed to turn on within timeout period",
1962 "Message": "System power failed to turn on within timeout period",
1963 "Notes": [
1964 ]
1965 }
1966 },
1967
1968 {
1969 "Name": "xyz.openbmc_project.Power.Error.PowerOffTimeout",
1970 "Subsystem": "power_sequencer",
1971 "ComponentID": "0x2700",
1972 "Severity": "critical",
1973
1974 "SRC": {
1975 "Type": "11",
1976 "ReasonCode": "0xD008",
1977 "Words6To9": {}
1978 },
1979
1980 "Callouts": [
1981 {
1982 "CalloutList": [
1983 { "Priority": "high", "LocCode": "P0" }
1984 ]
1985 }
1986 ],
1987
1988 "Documentation": {
1989 "Description": "System power failed to turn off within timeout period",
1990 "Message": "System power failed to turn off within timeout period",
Jim Wright7f678902020-11-30 16:03:57 -0600[diff] [blame]1991 "Notes": [
1992 ]
1993 }
1994 },
1995
1996 {
Shawn McCarney01648f52020-06-25 11:42:02 -0500[diff] [blame]1997 "Name": "xyz.openbmc_project.Power.Error.Internal",
1998 "Subsystem": "power",
1999 "ComponentID": "0x2700",
2000
2001 "SRC": {
2002 "Type": "11",
2003 "ReasonCode": "0xE000",
2004 "Words6To9": {}
2005 },
2006
2007 "Callouts": [
2008 {
2009 "CalloutList": [
2010 { "Priority": "high", "Procedure": "bmc_code" }
2011 ]
2012 }
2013 ],
2014
2015 "Documentation": {
2016 "Description": "An internal firmware error occurred",
2017 "Message": "An internal firmware error occurred",
2018 "Notes": [
2019 "The error details must be provided in the AdditionalData ",
2020 "property of the event log."
2021 ]
2022 }
2023 },
2024
2025 {
2026 "Name": "xyz.openbmc_project.Power.Error.I2C",
2027 "Subsystem": "cec_i2c",
2028 "ComponentID": "0x2700",
2029
2030 "SRC": {
2031 "Type": "11",
2032 "ReasonCode": "0xE100",
2033 "Words6To9": {}
2034 },
2035
2036 "Documentation": {
2037 "Description": "An I2C error occurred communicating with a device",
2038 "Message": "An I2C error occurred communicating with a device",
2039 "Notes": [
2040 "The device should be identified using the ",
2041 "CALLOUT_DEVICE_PATH or CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR ",
2042 "keywords in the AdditionalData property of the event ",
2043 "log. This will cause the device and the hardware in the ",
2044 "communication path to be called out."
2045 ]
2046 }
2047 },
2048
2049 {
2050 "Name": "xyz.openbmc_project.Power.Error.PMBus",
2051 "Subsystem": "power",
2052 "ComponentID": "0x2700",
2053
2054 "SRC": {
2055 "Type": "11",
2056 "ReasonCode": "0xE200",
2057 "Words6To9": {}
2058 },
2059
2060 "Documentation": {
2061 "Description": "A PMBus error occurred on a device",
2062 "Message": "A PMBus error occurred on a device",
2063 "Notes": [
2064 "This error occurs when the I2C communication was ",
2065 "successful, but the PMBus value read is invalid or ",
2066 "unsupported. CALLOUT_INVENTORY_PATH should be specified ",
2067 "in the AdditionalData property of the event log so that ",
2068 "the device is called out but not the communication path."
2069 ]
2070 }
2071 },
2072
2073 {
2074 "Name": "xyz.openbmc_project.Power.Error.DBus",
2075 "Subsystem": "power",
2076 "ComponentID": "0x2700",
2077
2078 "SRC": {
2079 "Type": "11",
2080 "ReasonCode": "0xE300",
2081 "Words6To9": {}
2082 },
2083
2084 "Callouts": [
2085 {
2086 "CalloutList": [
2087 { "Priority": "high", "Procedure": "bmc_code" }
2088 ]
2089 }
2090 ],
2091
2092 "Documentation": {
2093 "Description": "A firmware inter-process communication (D-Bus) error occurred",
2094 "Message": "A firmware inter-process communication (D-Bus) error occurred"
2095 }
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2096 },
2097
2098 {
Matt Spinler7c9c07e2020-10-22 10:16:37 -0500[diff] [blame]2099 "Name": "xyz.openbmc_project.Fan.Error.Fault",
2100 "Subsystem": "power_fans",
2101 "ComponentID": "0x2800",
2102
2103 "SRC": {
2104 "Type": "11",
2105 "ReasonCode": "0x76F0",
2106 "Words6To9": {}
2107 },
2108
2109 "Documentation": {
2110 "Description": "Fan rotor fault",
2111 "Message": "Fan rotor fault",
2112 "Notes": [
2113 "This error occurs when a fan rotor has been faulted for a ",
2114 "certain amount of time. The callout is the fan which is ",
2115 "passed in with CALLOUT_INVENTORY_PATH. The severity is ",
2116 "passed in during creation and will be either informational ",
2117 "or unrecoverable. The action flags use the defaults and ",
2118 "vary based on the severity."
2119 ]
2120 }
2121 },
2122
2123 {
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2124 "Name": "xyz.openbmc_project.Fan.Error.Missing",
2125 "Subsystem": "power_fans",
2126 "ComponentID": "0x2800",
2127 "Severity": "unrecoverable_redundancy_loss",
2128 "ActionFlags": ["service_action", "report", "call_home"],
2129
2130 "SRC": {
2131 "Type": "11",
2132 "ReasonCode": "0x76F1",
2133 "Words6To9": {}
2134 },
2135
2136 "Callouts": [
2137 {
Matt Spinler938ac792021-05-12 10:46:44 -0500[diff] [blame]2138 "System": "ibm,rainier",
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2139 "CalloutList": [
Matt Spinler80600192020-10-23 09:29:33 -0500[diff] [blame]2140 {
2141 "Priority": "high",
2142 "SymbolicFRUTrusted": "air_mover",
2143 "UseInventoryLocCode": true
2144 },
2145 {
2146 "Priority": "low",
2147 "LocCode": "P0"
2148 }
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2149 ]
Matt Spinler938ac792021-05-12 10:46:44 -0500[diff] [blame]2150 },
2151 {
2152 "System": "ibm,everest",
2153 "CalloutList": [
2154 {
2155 "Priority": "high",
2156 "SymbolicFRUTrusted": "air_mover",
2157 "UseInventoryLocCode": true
2158 },
2159 {
2160 "Priority": "low",
2161 "LocCode": "P1"
2162 }
2163 ]
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2164 }
2165 ],
2166
2167 "Documentation": {
2168 "Description": "A fan is missing",
2169 "Message": "A fan is missing",
2170 "Notes": [
2171 "This error occurs when a fan has been missing for a ",
Matt Spinler80600192020-10-23 09:29:33 -0500[diff] [blame]2172 "certain amount of time. The first callout is the ",
2173 "symbolic FRU AIR_MOVR that has the trusted fan location ",
2174 "code, which it gets using the passed in ",
2175 "CALLOUT_INVENTORY_PATH. The second callout is the FRU ",
Matt Spinler938ac792021-05-12 10:46:44 -0500[diff] [blame]2176 "where the controller and GPIO expander are."
Matt Spinler60d1c392020-09-23 15:23:24 -0500[diff] [blame]2177 ]
2178 }
SunnySrivastava19841ec60ea2020-09-03 07:07:25 -0500[diff] [blame]2179 },
2180
2181 {
Matt Spinleradf070b2021-04-21 13:39:45 -0500[diff] [blame]2182 "Name": "xyz.openbmc_project.Fan.Presence.Error.Detection",
2183 "ComponentID": "0x2800",
2184 "Subsystem": "power_fans",
2185 "Severity": "non_error",
2186 "ActionFlags": ["report"],
2187 "MfgSeverity": "predictive",
2188 "MfgActionFlags": ["service_action", "report"],
2189
2190 "SRC": {
2191 "Type": "11",
2192 "ReasonCode": "0x76F2",
2193 "Words6To9": {}
2194 },
2195
2196 "Callouts": [
2197 {
2198 "System": "ibm,rainier",
2199 "CalloutList": [
2200 {"Priority": "medium", "LocCode": "P0"}
2201 ]
2202 },
2203 {
2204 "System": "ibm,everest",
2205 "CalloutList": [
2206 {"Priority": "medium", "LocCode": "P1"}
2207 ]
2208 }
2209 ],
2210
2211 "Documentation": {
2212 "Description": "Presence detect methods for the same fan disagree",
2213 "Message": "Presence detect methods for the same fan disagree",
2214 "Notes": [
2215 "This error occurs when there is more than one way to detect",
2216 "fan presence, and they don't all agree. For example, the",
2217 "GPIO says a fan isn't present, but the tach readings are",
2218 "nonzero. This is informational, unless in manufacturing.",
2219 "The fan FRU is passed in as a high priority callout.",
2220 "The FRU the GPIO source is on is called out medium."
2221 ]
2222 }
2223 },
2224
2225 {
Matt Spinlerdde99202021-06-14 12:15:59 -0600[diff] [blame]2226 "Name": "xyz.openbmc_project.Fan.Error.FanControllerOffline",
2227 "ComponentID": "0x2800",
2228 "Subsystem": "power_fans",
2229 "Severity": "critical_system_term",
2230 "ActionFlags": ["service_action", "report", "call_home"],
2231
2232 "SRC": {
2233 "Type": "11",
2234 "ReasonCode": "0x76F3",
2235 "Words6To9": {},
2236 "PowerFault": true
2237 },
2238
2239 "Callouts": [
2240 {
2241 "System": "ibm,rainier",
2242 "CalloutList": [
2243 {"Priority": "high", "LocCode": "P0-C5"},
2244 {"Priority": "medium_group_a", "LocCode": "P0-T12", "SymbolicFRUTrusted": "fan_cable"},
2245 {"Priority": "medium_group_a", "LocCode": "P0-T17", "SymbolicFRUTrusted": "cable_continued"},
2246 {"Priority": "low", "LocCode": "P0"}
2247 ]
2248 },
2249 {
2250 "System": "ibm,everest",
2251 "CalloutList": [
2252 {"Priority": "high", "LocCode": "P0-C0"},
2253 {"Priority": "medium", "LocCode": "P1"},
2254 {"Priority": "low", "LocCode": "P0"}
2255 ]
2256 }
2257 ],
2258
2259 "Documentation": {
2260 "Description": "The fan controller device is offline",
2261 "Message": "The fan controller is offline. The system must be powered off.",
2262 "Notes": [
2263 "The device that controls the fans is offline so the fan",
2264 "targets and speeds are unknown. The system will be shut",
2265 "down to preserve thermal safety. There may be an I2C",
2266 "or power problem with the device."
2267 ]
2268 }
2269 },
2270
2271 {
Mike Cappsabc276e2021-06-18 16:41:30 -0400[diff] [blame]2272 "Name": "xyz.openbmc_project.Fan.Presence.Error.GPIODeviceUnavailable",
2273 "Subsystem": "power_fans",
2274 "ComponentID": "0x2800",
2275 "Severity": "unrecoverable_redundancy_loss",
2276 "ActionFlags": ["service_action", "report", "call_home"],
2277
2278 "SRC": {
2279 "Type": "11",
2280 "ReasonCode": "0x76F4",
2281 "Words6To9": {}
2282 },
2283
2284 "Callouts": [
2285 {
2286 "System" : "ibm,rainier",
2287 "CalloutList": [
2288 {"Priority": "high", "LocCode": "P0-C5"},
2289 {"Priority": "medium_group_a", "LocCode": "P0-T12","SymbolicFRUTrusted": "fan_cable"},
2290 {"Priority": "medium_group_a", "LocCode": "P0-T17","SymbolicFRUTrusted": "cable_continued"},
2291 {"Priority": "low", "LocCode": "P0"}
2292 ]
2293 },
2294 {
2295 "System" : "ibm,everest",
2296 "CalloutList": [
2297 {"Priority": "high", "LocCode": "P0-C0"},
2298 {"Priority": "medium", "LocCode": "P1"},
2299 {"Priority": "low", "LocCode": "P0"}
2300 ]
2301 }
2302 ],
2303
2304 "Documentation": {
2305 "Description": "Fan GPIO sensors not present",
2306 "Message": "Fan GPIO sensors not present",
2307 "Notes": [
2308 "The device that reports fan presence is not functioning."
2309 ]
2310 }
2311 },
2312
2313 {
Matt Spinler86e40dd2021-01-29 11:19:36 -0600[diff] [blame]2314 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHigh",
2315 "Subsystem": "power",
2316 "ComponentID": "0x2800",
2317 "Severity": "predictive",
2318 "ActionFlags": ["service_action", "report"],
2319
2320 "SRC": {
2321 "ReasonCode": "0x2801",
2322 "Words6To9": {}
2323 },
2324
2325 "CalloutsUsingAD": {
2326 "ADName": "SENSOR_NAME",
2327 "CalloutsWithTheirADValues": [
2328 {
2329 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2330 "Callouts": [
2331 {
2332 "CalloutList": [
2333 { "Priority": "high", "SymbolicFRU": "ambient_temp" }
2334 ]
2335 }
2336 ]
2337 }
2338 ]
2339 },
2340
2341 "Documentation": {
2342 "Description": "A temperature sensor exceeded its performance loss threshold.",
2343 "Message": "A temperature sensor exceeded its performance loss threshold.",
2344 "Notes": [
2345 "A temperature sensor crossed its performance loss threshold value",
2346 "If it is the ambient sensor, then a symbolic FRU will be added.",
2347 "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
2348 "a FRU callout."
2349 ]
2350 }
2351 },
2352
2353 {
2354 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHighClear",
2355 "Subsystem": "power",
2356 "ComponentID": "0x2800",
2357 "Severity": "non_error",
2358 "ActionFlags": ["report"],
2359 "EventType": "env_normal",
2360
2361 "SRC": {
2362 "ReasonCode": "0x2802",
2363 "Words6To9": {}
2364 },
2365
2366 "CalloutsUsingAD": {
2367 "ADName": "SENSOR_NAME",
2368 "CalloutsWithTheirADValues": [
2369 {
2370 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2371 "Callouts": [
2372 {
2373 "CalloutList": [
2374 { "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
2375 ]
2376 }
2377 ]
2378 }
2379 ]
2380 },
2381
2382 "Documentation": {
2383 "Description": "A temperature sensor is under its performance loss threshold.",
2384 "Message": "A temperature sensor is under its performance loss threshold.",
2385 "Notes": [
2386 "A temperature sensor crossed under its performance loss threshold value",
2387 "If it is the ambient sensor, then a symbolic FRU will be added."
2388 ]
2389 }
2390 },
2391
2392 {
2393 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHigh",
2394 "Subsystem": "power",
2395 "ComponentID": "0x2800",
2396 "Severity": "predictive",
2397 "ActionFlags": ["service_action", "report"],
2398
2399 "SRC": {
2400 "ReasonCode": "0x2803",
2401 "Words6To9": {}
2402 },
2403
2404 "CalloutsUsingAD": {
2405 "ADName": "SENSOR_NAME",
2406 "CalloutsWithTheirADValues": [
2407 {
2408 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2409 "Callouts": [
2410 {
2411 "CalloutList": [
2412 { "Priority": "high", "SymbolicFRU": "ambient_temp" }
2413 ]
2414 }
2415 ]
2416 }
2417 ]
2418 },
2419
2420 "Documentation": {
2421 "Description": "A temperature sensor exceeded its warning threshold.",
2422 "Message": "A temperature sensor exceeded its warning threshold.",
2423 "Notes": [
2424 "A temperature sensor crossed its warning threshold value",
2425 "If it is the ambient sensor, then a symbolic FRU will be added.",
2426 "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
2427 "a FRU callout."
2428 ]
2429 }
2430 },
2431
2432 {
2433 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHighClear",
2434 "Subsystem": "power",
2435 "ComponentID": "0x2800",
2436 "Severity": "non_error",
2437 "ActionFlags": ["report"],
2438 "EventType": "env_normal",
2439
2440 "SRC": {
2441 "ReasonCode": "0x2804",
2442 "Words6To9": {}
2443 },
2444
2445 "CalloutsUsingAD": {
2446 "ADName": "SENSOR_NAME",
2447 "CalloutsWithTheirADValues": [
2448 {
2449 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2450 "Callouts": [
2451 {
2452 "CalloutList": [
2453 { "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
2454 ]
2455 }
2456 ]
2457 }
2458 ]
2459 },
2460
2461 "Documentation": {
2462 "Description": "A temperature sensor is under its warning threshold.",
2463 "Message": "A temperature sensor is under its warning threshold.",
2464 "Notes": [
2465 "A temperature sensor crossed under its warning threshold value",
2466 "If it is the ambient sensor, then a symbolic FRU will be added."
2467 ]
2468 }
2469 },
2470
2471 {
2472 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHigh",
2473 "Subsystem": "power",
2474 "ComponentID": "0x2800",
2475 "Severity": "predictive",
2476 "ActionFlags": ["service_action", "report"],
2477
2478 "SRC": {
2479 "ReasonCode": "0x2805",
2480 "Words6To9": {}
2481 },
2482
2483 "CalloutsUsingAD": {
2484 "ADName": "SENSOR_NAME",
2485 "CalloutsWithTheirADValues": [
2486 {
2487 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2488 "Callouts": [
2489 {
2490 "CalloutList": [
2491 { "Priority": "high", "SymbolicFRU": "ambient_temp" }
2492 ]
2493 }
2494 ]
2495 }
2496 ]
2497 },
2498
2499 "Documentation": {
2500 "Description": "A temperature sensor exceeded its critical threshold.",
2501 "Message": "A temperature sensor exceeded its critical threshold.",
2502 "Notes": [
2503 "A temperature sensor crossed its critical threshold value",
2504 "If it is the ambient sensor, then a symbolic FRU will be added.",
2505 "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add",
2506 "a FRU callout."
2507 ]
2508 }
2509 },
2510
2511 {
2512 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHighClear",
2513 "Subsystem": "power",
2514 "ComponentID": "0x2800",
2515 "Severity": "non_error",
2516 "ActionFlags": ["report"],
2517 "EventType": "env_normal",
2518
2519 "SRC": {
2520 "ReasonCode": "0x2806",
2521 "Words6To9": {}
2522 },
2523
2524 "CalloutsUsingAD": {
2525 "ADName": "SENSOR_NAME",
2526 "CalloutsWithTheirADValues": [
2527 {
2528 "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp",
2529 "Callouts": [
2530 {
2531 "CalloutList": [
2532 { "Priority": "high", "SymbolicFRU": "ambient_temp_back" }
2533 ]
2534 }
2535 ]
2536 }
2537 ]
2538 },
2539
2540 "Documentation": {
2541 "Description": "A temperature sensor is under its critical threshold.",
2542 "Message": "A temperature sensor is under its critical threshold.",
2543 "Notes": [
2544 "A temperature sensor crossed under its critical threshold value",
2545 "If it is the ambient sensor, then a symbolic FRU will be added."
2546 ]
2547 }
2548 },
2549
2550 {
Matt Spinler6b3490a2021-01-20 10:48:26 -0600[diff] [blame]2551 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHigh",
2552 "Subsystem": "power",
2553 "ComponentID": "0x2800",
2554 "Severity": "predictive",
2555 "ActionFlags": ["service_action", "report"],
2556
2557 "SRC": {
2558 "ReasonCode": "0x2807",
2559 "Words6To9": {}
2560 },
2561
2562 "Callouts": [
2563 {
2564 "CalloutList": [
2565 {
2566 "Priority": "high",
2567 "SymbolicFRU": "ambient_temp"
2568 }
2569 ]
2570 }
2571 ],
2572
2573 "Documentation": {
2574 "Description": "The ambient temperature passed the EPOW3 limit.",
2575 "Message": "The ambient temperature passed the EPOW3 limit. The system will shut down if temp doesn't decrease.",
2576 "Notes": [
2577 "This error occurs when the ambient temperature surpassed",
2578 "the EPOW3 shutdown limit."
2579 ]
2580 }
2581 },
2582
2583 {
2584 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHighClear",
2585 "Subsystem": "power",
2586 "ComponentID": "0x2800",
2587 "Severity": "non_error",
2588 "ActionFlags": ["report"],
2589 "EventType": "env_normal",
2590
2591 "SRC": {
2592 "ReasonCode": "0x2808",
2593 "Words6To9": {}
2594 },
2595
2596 "Callouts": [
2597 {
2598 "CalloutList": [
2599 {
2600 "Priority": "high",
2601 "SymbolicFRU": "ambient_temp_back"
2602 }
2603 ]
2604 }
2605 ],
2606
2607 "Documentation": {
2608 "Description": "The ambient temperature is back under the EPOW3 limit.",
2609 "Message": "The ambient temperature is back under the EPOW3 limit."
2610 }
2611 },
2612
2613 {
2614 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.HardShutdownAlarmHigh",
2615 "Subsystem": "power",
2616 "ComponentID": "0x2800",
Matt Spinler6b3490a2021-01-20 10:48:26 -0600[diff] [blame]2617 "ActionFlags": ["service_action", "report"],
2618
2619 "SRC": {
2620 "ReasonCode": "0x2809",
2621 "Words6To9": {}
2622 },
2623
2624 "Callouts": [
2625 {
2626 "CalloutList": [
2627 {
2628 "Priority": "high",
2629 "SymbolicFRU": "ambient_temp"
2630 }
2631 ]
2632 }
2633 ],
2634
2635 "Documentation": {
2636 "Description": "The ambient temperature passed the EPOW4 limit.",
2637 "Message": "The ambient temperature passed the EPOW4 limit. The system will shut down",
2638 "Notes": [
2639 "This error occurs when the ambient temperature surpassed",
2640 "the EPOW4 shutdown limit."
2641 ]
2642 }
2643 },
2644
2645 {
Rashmica Guptab63f75b2021-08-18 20:54:21 +1000[diff] [blame]2646 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHigh",
2647 "Subsystem": "ext_env",
2648 "ComponentID": "0x2800",
2649 "Severity": "predictive",
2650 "ActionFlags": ["service_action", "report"],
2651
2652 "SRC": {
2653 "ReasonCode": "0x280A",
2654 "Words6To9": {}
2655 },
2656
2657 "CalloutsUsingAD": {
2658 "ADName": "SENSOR_NAME",
2659 "CalloutsWithTheirADValues": [
2660 {
2661 "ADValue": "/xyz/openbmc_project/sensors/altitude/Altitude",
2662 "Callouts": [
2663 {
2664 "CalloutList": [
2665 { "Priority": "high", "SymbolicFRU": "altitude" }
2666 ]
2667 }
2668 ]
2669 }
2670 ]
2671 },
2672
2673 "Documentation": {
2674 "Description": "An altitude sensor exceeded its warning threshold.",
2675 "Message": "An altitude sensor exceeded its warning threshold.",
2676 "Notes": [
2677 "The virtual altitude sensor crossed its warning threshold value",
2678 " and a symbolic FRU will be added."
2679 ]
2680 }
2681 },
2682
2683 {
2684 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.AltitudeWarningHighClear",
2685 "Subsystem": "ext_env",
2686 "ComponentID": "0x2800",
2687 "Severity": "non_error",
2688 "ActionFlags": ["report"],
2689 "EventType": "env_normal",
2690
2691 "SRC": {
2692 "ReasonCode": "0x280B",
2693 "Words6To9": {}
2694 },
2695
2696 "Documentation": {
2697 "Description": "An altitude sensor is under its warning threshold.",
2698 "Message": "An altitude sensor is under its warning threshold.",
2699 "Notes": [
2700 "The virtual altitude sensor is under its warning threshold value",
2701 " and a symbolic FRU will be added."
2702 ]
2703 }
2704 },
2705
2706 {
Matt Spinler81331342021-10-05 14:09:56 -0500[diff] [blame]2707 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLow",
2708 "Subsystem": "cec_tod",
2709 "ComponentID": "0x2800",
2710 "Severity": "predictive",
2711 "ActionFlags": ["service_action", "report"],
2712
2713 "SRC": {
2714 "ReasonCode": "0x280C",
2715 "Words6To9": {}
2716 },
2717
2718 "CalloutsUsingAD": {
2719 "ADName": "SENSOR_NAME",
2720 "CalloutsWithTheirADValues": [
2721 {
2722 "ADValue": "/xyz/openbmc_project/sensors/voltage/Battery_Voltage",
2723 "Callouts": [
2724 {
2725 "System": "ibm,rainier",
2726 "CalloutList": [
2727 {
2728 "Priority": "high",
2729 "LocCode": "P0-E0"
2730 }
2731 ]
2732 },
2733 {
2734 "System": "ibm,everest",
2735 "CalloutList": [
2736 {
2737 "Priority": "high",
2738 "LocCode": "P0-C0-E0"
2739 }
2740 ]
2741 }
2742 ]
2743 }
2744 ]
2745 },
2746
2747 "Documentation": {
2748 "Description": "A voltage sensor went below its critical low threshold.",
2749 "Message": "A voltage sensor went below its critical low threshold."
2750 }
2751 },
2752
2753 {
2754 "Name": "xyz.openbmc_project.Sensor.Threshold.Error.VoltageCriticalLowClear",
2755 "Subsystem": "cec_tod",
2756 "ComponentID": "0x2800",
2757 "Severity": "non_error",
2758 "ActionFlags": ["report"],
2759
2760 "SRC": {
2761 "ReasonCode": "0x280D",
2762 "Words6To9": {}
2763 },
2764
2765 "Documentation": {
2766 "Description": "A voltage sensor is over its critical low threshold.",
2767 "Message": "A voltage sensor is over its critical low threshold."
2768 }
2769 },
2770
2771 {
SunnySrivastava19841ec60ea2020-09-03 07:07:25 -0500[diff] [blame]2772 "Name": "com.ibm.VPD.Error.InvalidEepromPath",
2773 "Subsystem": "cec_vpd",
2774 "ComponentID": "0x4000",
2775
2776 "SRC": {
2777 "ReasonCode": "0x4000",
2778 "Words6To9":
2779 {
2780 "6":
2781 {
2782 "Description": "Errno of the failure.",
2783 "AdditionalDataPropSource": "CALLOUT_ERRNO"
2784 }
2785 }
2786 },
2787
2788 "Documentation": {
2789 "Description": "A path access error ocurred",
2790 "Message": "An EEPROM path access error occurred.",
2791 "Notes": [
2792 "This error occurs when parser is unable to access",
2793 "EEPROM path. Errno and device path are captured as",
2794 "additional data."
2795 ]
2796 }
2797 },
2798
2799 {
2800 "Name": "com.ibm.VPD.Error.InvalidVPD",
2801 "Subsystem": "cec_vpd",
2802 "ComponentID": "0x4000",
2803
2804 "SRC": {
2805 "ReasonCode": "0x4001",
2806 "Words6To9":
2807 {
2808 }
2809 },
2810
2811 "Documentation": {
2812 "Description": "Invalid VPD data.",
2813 "Message": "A VPD data exception occurred.",
2814 "Notes": [
2815 "This error occurs when VPD data is found to be",
2816 "invalid. This can be when VPD file is missing out",
2817 "mandatory records.Inventory path is captured in",
2818 "additional data."
2819 ]
2820 }
2821 },
2822
2823 {
2824 "Name": "com.ibm.VPD.Error.EccCheckFailed",
2825 "Subsystem": "cec_vpd",
2826 "ComponentID": "0x4000",
2827
2828 "SRC": {
2829 "ReasonCode": "0x4002",
2830 "Words6To9":
2831 {
2832 }
2833 },
2834
2835 "Documentation": {
2836 "Description": "Invalid VPD ecc data.",
2837 "Message": "A VPD ecc exception occurred.",
2838 "Notes": [
2839 "This error occurs when VPD ecc check fails for the FRU.",
2840 "Inventory path for the failed FRU is captured in additonal",
2841 "data."
2842 ]
2843 }
2844 },
2845
2846 {
2847 "Name": "com.ibm.VPD.Error.InvalidJson",
2848 "Subsystem": "cec_vpd",
2849 "ComponentID": "0x4000",
2850
2851 "SRC": {
2852 "ReasonCode": "0x4003",
2853 "Words6To9":
2854 {
2855 }
2856 },
2857
2858 "Documentation": {
2859 "Description": "Invalid Json",
2860 "Message": "A Json failure occurred.",
2861 "Notes": [
2862 "This error occurs when parser fails to access",
2863 "Json file or there is any issue with Json data.",
2864 "Failed Json path and cause of failure is captured",
2865 "in additional data."
2866 ]
2867 }
2868 },
2869
2870 {
2871 "Name": "com.ibm.VPD.Error.BlankSystemVPD",
2872 "Subsystem": "cec_vpd",
2873 "ComponentID": "0x4000",
2874
2875 "SRC": {
2876 "ReasonCode": "0x4004",
2877 "Words6To9":
2878 {
2879 }
2880 },
2881
2882 "Documentation": {
2883 "Description": "System VPD restore failed",
2884 "Message": "A system VPD restoration error occurred.",
2885 "Notes": [
2886 "This error occurs when restoring of system VPD fails.",
2887 "The FRU path and reason for failure is captured in",
2888 "additional data."
2889 ]
2890 }
2891 },
2892
2893 {
2894 "Name": "com.ibm.VPD.Error.DbusFailure",
2895 "Subsystem": "cec_vpd",
2896 "ComponentID": "0x4000",
2897
2898 "SRC": {
2899 "ReasonCode": "0x4005",
2900 "Words6To9":
2901 {
2902 }
2903 },
2904
2905 "Documentation": {
2906 "Description": "Dbus exception",
2907 "Message": "A Dbus internal error occurred.",
2908 "Notes": [
2909 "This error occurs when Dbus operation fails.",
2910 "Exceptions details are captured in additonal",
2911 "data."
2912 ]
2913 }
Shantappa Teekappanavarc3c96d92021-06-09 23:30:47 -0500[diff] [blame]2914 },
2915
2916 {
2917 "Name": "org.open_power.Host.Boot.Error.WatchdogTimeout",
2918 "Subsystem": "cec_sp_hostboot_iface",
2919
2920 "SRC":
2921 {
2922 "ReasonCode": "0xC101",
2923 "Words6To9":
2924 {
2925 }
2926 },
2927
2928 "Documentation":
2929 {
2930 "Description": "Host did not respond within the watchdog timeout interval",
2931 "Message": "Host did not respond before the watchdog timeout interval expired",
2932 "Notes": [
2933 "Host did not respond before the expiry of the watchdog timeout interval.",
2934 "Collecting hostboot dump."
2935 ]
2936 }
Matt Spinler3fd08d62019-10-22 14:25:33 -0500[diff] [blame]2937 }
Shantappa Teekappanavarc3c96d92021-06-09 23:30:47 -0500[diff] [blame]2938
Matt Spinler44792fd2019-09-26 15:58:58 -0500[diff] [blame]2939 ]
2940}