blob: bbd220a35bc2fa3cb0cbff70c8b91cccd744e27e [file] [log] [blame]
#pragma once
#include "message_handler.hpp"
#include <vector>
namespace sol
{
namespace command
{
constexpr uint8_t IPMI_CC_PAYLOAD_ALREADY_ACTIVE = 0x80;
constexpr uint8_t IPMI_CC_PAYLOAD_TYPE_DISABLED = 0x81;
constexpr uint8_t IPMI_CC_PAYLOAD_ACTIVATION_LIMIT = 0x82;
constexpr uint8_t IPMI_CC_PAYLOAD_WITH_ENCRYPTION = 0x83;
constexpr uint8_t IPMI_CC_PAYLOAD_WITHOUT_ENCRYPTION = 0x84;
/** @struct ActivatePayloadRequest
*
* IPMI payload for Activate Payload command request.
*/
struct ActivatePayloadRequest
{
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t payloadType : 6; //!< Payload type.
uint8_t reserved1 : 2; //!< Reserved.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t reserved1 : 2; //!< Payload type.
uint8_t payloadType : 6; //!< Payload type.
#endif
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t payloadInstance : 4; //!< Payload instance.
uint8_t reserved2 : 4; //!< Reserved.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t reserved2 : 4; //!< Reserved.
uint8_t payloadInstance : 4; //!< Payload instance.
#endif
/** @brief The following Auxiliary Request Data applies only for payload
* SOL only.
*/
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t reserved4 : 1; //!< Reserved.
uint8_t handshake : 1; //!< SOL startup handshake.
uint8_t alert : 2; //!< Shared serial alert behavior.
uint8_t reserved3 : 1; //!< Reserved.
uint8_t testMode : 1; //!< Test mode.
uint8_t auth : 1; //!< If true, activate payload with authentication.
uint8_t encryption : 1; //!< If true, activate payload with encryption.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t encryption : 1; //!< If true, activate payload with encryption.
uint8_t auth : 1; //!< If true, activate payload with authentication.
uint8_t testMode : 1; //!< Test mode.
uint8_t reserved3 : 1; //!< Reserved.
uint8_t alert : 2; //!< Shared serial alert behavior.
uint8_t handshake : 1; //!< SOL startup handshake.
uint8_t reserved4 : 1; //!< Reserved.
#endif
uint8_t reserved5; //!< Reserved.
uint8_t reserved6; //!< Reserved.
uint8_t reserved7; //!< Reserved.
} __attribute__((packed));
/** @struct ActivatePayloadResponse
*
* IPMI payload for Activate Payload command response.
*/
struct ActivatePayloadResponse
{
uint8_t completionCode; //!< Completion code.
uint8_t reserved1; //!< Reserved.
uint8_t reserved2; //!< Reserved.
uint8_t reserved3; //!< Reserved.
// Test Mode
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t testMode : 1; //!< Test mode.
uint8_t reserved4 : 7; //!< Reserved.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t reserved4 : 7; //!< Reserved.
uint8_t testMode : 1; //!< Test mode.
#endif
uint16_t inPayloadSize; //!< Inbound payload size
uint16_t outPayloadSize; //!< Outbound payload size.
uint16_t portNum; //!< Payload UDP port number.
uint16_t vlanNum; //!< Payload VLAN number.
} __attribute__((packed));
/** @brief Activate Payload Command.
*
* This command is used for activating and deactivating a payload type under a
* given IPMI session. The UDP Port number for SOL is the same as the port that
* was used to establish the IPMI session.
*
* @param[in] inPayload - Request data for the command.
* @param[in] handler - Reference to the message handler.
*
* @return Response data for the command
*/
std::vector<uint8_t>
activatePayload(const std::vector<uint8_t>& inPayload,
std::shared_ptr<message::Handler>& handler);
constexpr uint8_t IPMI_CC_PAYLOAD_DEACTIVATED = 0x80;
/** @struct DeactivatePayloadRequest
*
* IPMI payload for Deactivate Payload command request.
*/
struct DeactivatePayloadRequest
{
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t payloadType : 6; //!< Payload type.
uint8_t reserved1 : 2; //!< Reserved.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t reserved1 : 2; //!< Payload type.
uint8_t payloadType : 6; //!< Reserved.
#endif
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t payloadInstance : 4; //!< Payload instance.
uint8_t reserved2 : 4; //!< Reserved.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t reserved2 : 4; //!< Reserved.
uint8_t payloadInstance : 4; //!< Payload instance.
#endif
/** @brief No auxiliary data for payload type SOL */
uint8_t auxData1; //!< Auxiliary data 1
uint8_t auxData2; //!< Auxiliary data 2
uint8_t auxData3; //!< Auxiliary data 3
uint8_t auxData4; //!< Auxiliary data 4
} __attribute__((packed));
/** @struct DeactivatePayloadResponse
*
* IPMI payload for Deactivate Payload Command response.
*/
struct DeactivatePayloadResponse
{
uint8_t completionCode; //!< Completion code
} __attribute__((packed));
/** @brief Deactivate Payload Command.
*
* This command is used to terminate use of a given payload on an IPMI session.
* This type of traffic then becomes freed for activation by another session,
* or for possible re-activation under the present session.The Deactivate
* Payload command does not cause the session to be terminated. The Close
* Session command should be used for that purpose. A remote console
* terminating a application does not need to explicitly deactivate payload(s)
* prior to session. When a session terminates all payloads that were active
* under that session are automatically deactivated by the BMC.
*
* @param[in] inPayload - Request data for the command.
* @param[in] handler - Reference to the message handler.
*
* @return Response data for the command.
*/
std::vector<uint8_t>
deactivatePayload(const std::vector<uint8_t>& inPayload,
std::shared_ptr<message::Handler>& handler);
/** @struct GetPayloadStatusRequest
*
* IPMI payload for Get Payload Activation Status command request.
*/
struct GetPayloadStatusRequest
{
uint8_t payloadType; //!< Payload type
} __attribute__((packed));
/** @struct GetPayloadStatusResponse
*
* IPMI payload for Get Payload Activation Status command response.
*/
struct GetPayloadStatusResponse
{
uint8_t completionCode; //!< Completion code.
uint8_t capacity; //!< Instance capacity.
/* @brief Activation Status. */
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t instance1 : 1; //!< If true, Instance 1 is activated.
uint8_t instance2 : 1; //!< If true, Instance 2 is activated.
uint8_t instance3 : 1; //!< If true, Instance 3 is activated.
uint8_t instance4 : 1; //!< If true, Instance 4 is activated.
uint8_t instance5 : 1; //!< If true, Instance 5 is activated.
uint8_t instance6 : 1; //!< If true, Instance 6 is activated.
uint8_t instance7 : 1; //!< If true, Instance 7 is activated.
uint8_t instance8 : 1; //!< If true, Instance 8 is activated.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t instance8 : 1; //!< If true, Instance 8 is activated.
uint8_t instance7 : 1; //!< If true, Instance 7 is activated.
uint8_t instance6 : 1; //!< If true, Instance 6 is activated.
uint8_t instance5 : 1; //!< If true, Instance 5 is activated.
uint8_t instance4 : 1; //!< If true, Instance 4 is activated.
uint8_t instance3 : 1; //!< If true, Instance 3 is activated.
uint8_t instance2 : 1; //!< If true, Instance 2 is activated.
uint8_t instance1 : 1; //!< If true, Instance 1 is activated.
#endif
#if BYTE_ORDER == LITTLE_ENDIAN
uint8_t instance9 : 1; //!< If true, Instance 9 is activated.
uint8_t instance10 : 1; //!< If true, Instance 10 is activated.
uint8_t instance11 : 1; //!< If true, Instance 11 is activated.
uint8_t instance12 : 1; //!< If true, Instance 12 is activated.
uint8_t instance13 : 1; //!< If true, Instance 13 is activated.
uint8_t instance14 : 1; //!< If true, Instance 14 is activated.
uint8_t instance15 : 1; //!< If true, Instance 15 is activated.
uint8_t instance16 : 1; //!< If true, Instance 16 is activated.
#endif
#if BYTE_ORDER == BIG_ENDIAN
uint8_t instance16 : 1; //!< If true, Instance 16 is activated.
uint8_t instance15 : 1; //!< If true, Instance 15 is activated.
uint8_t instance14 : 1; //!< If true, Instance 14 is activated.
uint8_t instance13 : 1; //!< If true, Instance 13 is activated.
uint8_t instance12 : 1; //!< If true, Instance 12 is activated.
uint8_t instance11 : 1; //!< If true, Instance 11 is activated.
uint8_t instance10 : 1; //!< If true, Instance 10 is activated.
uint8_t instance9 : 1; //!< If true, Instance 9 is activated.
#endif
} __attribute__((packed));
/** @brief Get Payload Activation Status Command.
*
* This command returns how many instances of a given payload type are
* presently activated, and how many total instances can be activated.
*
* @param[in] inPayload - Request Data for the command.
* @param[in] handler - Reference to the Message Handler.
*
* @return Response data for the command
*/
std::vector<uint8_t>
getPayloadStatus(const std::vector<uint8_t>& inPayload,
std::shared_ptr<message::Handler>& handler);
/** @struct GetPayloadInfoRequest
*
* IPMI payload for Get Payload Instance info command request.
*/
struct GetPayloadInfoRequest
{
uint8_t payloadType; //!< Payload type
uint8_t payloadInstance; //!< Payload instance
} __attribute__((packed));
/** @struct GetPayloadInfoResponse
*
* IPMI payload for Get Payload Instance info command response.
*/
struct GetPayloadInfoResponse
{
uint8_t completionCode; //!< Completion code.
uint32_t sessionID; //!< Session ID
uint8_t portNumber; //!< Port number
uint8_t reserved[7]; //!< Reserved
} __attribute__((packed));
/** @brief Get Payload Instance Info Command.
*
* This command returns information about a specific instance of a payload
* type. Session ID is returned by this command
*
* @param[in] inPayload - Request Data for the command.
* @param[in] handler - Reference to the Message Handler.
*
* @return Response data for the command
*/
std::vector<uint8_t> getPayloadInfo(const std::vector<uint8_t>& inPayload,
std::shared_ptr<message::Handler>& handler);
} // namespace command
} // namespace sol