blob: db15b8d3ccb6c5433131dbe02a5bd27f016d961e [file] [log] [blame]
/**
* Copyright 2017 Google Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "config.h"
#include "build/buildjson.hpp"
#include "conf.hpp"
#include "dbus/dbusconfiguration.hpp"
#include "interfaces.hpp"
#include "pid/builder.hpp"
#include "pid/buildjson.hpp"
#include "pid/pidloop.hpp"
#include "pid/tuning.hpp"
#include "pid/zone.hpp"
#include "sensors/builder.hpp"
#include "sensors/buildjson.hpp"
#include "sensors/manager.hpp"
#include "util.hpp"
#include <CLI/CLI.hpp>
#include <boost/asio/io_context.hpp>
#include <boost/asio/steady_timer.hpp>
#include <sdbusplus/asio/connection.hpp>
#include <sdbusplus/bus.hpp>
#include <sdbusplus/server/manager.hpp>
#include <chrono>
#include <filesystem>
#include <iostream>
#include <list>
#include <map>
#include <memory>
#include <thread>
#include <unordered_map>
#include <utility>
#include <vector>
namespace pid_control
{
/* The configuration converted sensor list. */
std::map<std::string, conf::SensorConfig> sensorConfig = {};
/* The configuration converted PID list. */
std::map<int64_t, conf::PIDConf> zoneConfig = {};
/* The configuration converted Zone configuration. */
std::map<int64_t, conf::ZoneConfig> zoneDetailsConfig = {};
} // namespace pid_control
/** the swampd daemon will check for the existence of this file. */
constexpr auto jsonConfigurationPath = "/usr/share/swampd/config.json";
std::string configPath = "";
/* async io context for operation */
boost::asio::io_context io;
/* buses for system control */
static sdbusplus::asio::connection modeControlBus(io);
static sdbusplus::asio::connection
hostBus(io, sdbusplus::bus::new_system().release());
static sdbusplus::asio::connection
passiveBus(io, sdbusplus::bus::new_system().release());
namespace pid_control
{
void restartControlLoops()
{
static SensorManager mgmr;
static std::unordered_map<int64_t, std::shared_ptr<ZoneInterface>> zones;
static std::vector<std::shared_ptr<boost::asio::steady_timer>> timers;
static bool isCanceling = false;
for (const auto& timer : timers)
{
timer->cancel();
}
isCanceling = true;
timers.clear();
if (zones.size() > 0 && zones.begin()->second.use_count() > 1)
{
throw std::runtime_error("wait for count back to 1");
}
zones.clear();
isCanceling = false;
const std::string& path =
(configPath.length() > 0) ? configPath : jsonConfigurationPath;
if (std::filesystem::exists(path))
{
/*
* When building the sensors, if any of the dbus passive ones aren't on
* the bus, it'll fail immediately.
*/
try
{
auto jsonData = parseValidateJson(path);
sensorConfig = buildSensorsFromJson(jsonData);
std::tie(zoneConfig, zoneDetailsConfig) =
buildPIDsFromJson(jsonData);
}
catch (const std::exception& e)
{
std::cerr << "Failed during building: " << e.what() << "\n";
exit(EXIT_FAILURE); /* fatal error. */
}
}
else
{
static boost::asio::steady_timer reloadTimer(io);
if (!dbus_configuration::init(modeControlBus, reloadTimer, sensorConfig,
zoneConfig, zoneDetailsConfig))
{
return; // configuration not ready
}
}
mgmr = buildSensors(sensorConfig, passiveBus, hostBus);
zones = buildZones(zoneConfig, zoneDetailsConfig, mgmr, modeControlBus);
if (0 == zones.size())
{
std::cerr << "No zones defined, exiting.\n";
std::exit(EXIT_FAILURE);
}
for (const auto& i : zones)
{
std::shared_ptr<boost::asio::steady_timer> timer = timers.emplace_back(
std::make_shared<boost::asio::steady_timer>(io));
std::cerr << "pushing zone " << i.first << "\n";
pidControlLoop(i.second, timer, &isCanceling);
}
}
void tryRestartControlLoops(bool first)
{
static int count = 0;
static const auto delayTime = std::chrono::seconds(10);
static boost::asio::steady_timer timer(io);
// try to start a control loop while the loop has been scheduled.
if (first && count != 0)
{
std::cerr
<< "ControlLoops has been scheduled, refresh the loop count\n";
count = 1;
return;
}
auto restartLbd = [](const boost::system::error_code& error) {
if (error == boost::asio::error::operation_aborted)
{
return;
}
// for the last loop, don't elminate the failure of restartControlLoops.
if (count >= 5)
{
restartControlLoops();
// reset count after succesful restartControlLoops()
count = 0;
return;
}
// retry when restartControlLoops() has some failure.
try
{
restartControlLoops();
// reset count after succesful restartControlLoops()
count = 0;
}
catch (const std::exception& e)
{
std::cerr << count
<< " Failed during restartControlLoops, try again: "
<< e.what() << "\n";
tryRestartControlLoops(false);
}
};
count++;
// first time of trying to restart the control loop without a delay
if (first)
{
boost::asio::post(io,
std::bind(restartLbd, boost::system::error_code()));
}
// re-try control loop, set up a delay.
else
{
timer.expires_after(delayTime);
timer.async_wait(restartLbd);
}
return;
}
} // namespace pid_control
int main(int argc, char* argv[])
{
loggingPath = "";
loggingEnabled = false;
tuningEnabled = false;
CLI::App app{"OpenBMC Fan Control Daemon"};
app.add_option("-c,--conf", configPath,
"Optional parameter to specify configuration at run-time")
->check(CLI::ExistingFile);
app.add_option("-l,--log", loggingPath,
"Optional parameter to specify logging folder")
->check(CLI::ExistingDirectory);
app.add_flag("-t,--tuning", tuningEnabled, "Enable or disable tuning");
CLI11_PARSE(app, argc, argv);
static constexpr auto loggingEnablePath = "/etc/thermal.d/logging";
static constexpr auto tuningEnablePath = "/etc/thermal.d/tuning";
// Set up default logging path, preferring command line if it was given
std::string defLoggingPath(loggingPath);
if (defLoggingPath.empty())
{
defLoggingPath = std::filesystem::temp_directory_path();
}
else
{
// Enable logging, if user explicitly gave path on command line
loggingEnabled = true;
}
// If this file exists, enable logging at runtime
std::ifstream fsLogging(loggingEnablePath);
if (fsLogging)
{
// The first line of file might be a valid directory path
std::getline(fsLogging, loggingPath);
fsLogging.close();
// If so, use it, otherwise use default logging path instead
if (!(std::filesystem::exists(loggingPath)))
{
loggingPath = defLoggingPath;
}
loggingEnabled = true;
}
if (loggingEnabled)
{
std::cerr << "Logging enabled: " << loggingPath << "\n";
}
// If this file exists, enable tuning at runtime
if (std::filesystem::exists(tuningEnablePath))
{
tuningEnabled = true;
}
// This can also be enabled from the command line
if (tuningEnabled)
{
std::cerr << "Tuning enabled\n";
}
static constexpr auto modeRoot = "/xyz/openbmc_project/settings/fanctrl";
// Create a manager for the ModeBus because we own it.
sdbusplus::server::manager::manager(
static_cast<sdbusplus::bus::bus&>(modeControlBus), modeRoot);
hostBus.request_name("xyz.openbmc_project.Hwmon.external");
modeControlBus.request_name("xyz.openbmc_project.State.FanCtrl");
sdbusplus::server::manager::manager objManager(modeControlBus, modeRoot);
/*
* All sensors are managed by one manager, but each zone has a pointer to
* it.
*/
pid_control::tryRestartControlLoops();
io.run();
return 0;
}