dbus/dbusconfiguration.cpp - openbmc/phosphor-pid-control - Gitiles

 /*
 // Copyright (c) 2018 Intel Corporation
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //      http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.
 */

 #include <chrono>
 #include <conf.hpp>
 #include <dbus/util.hpp>
 #include <functional>
 #include <iostream>
 #include <sdbusplus/bus.hpp>
 #include <sdbusplus/bus/match.hpp>
 #include <set>
 #include <thread>
 #include <unordered_map>

 static constexpr bool DEBUG = false; // enable to print found configuration

 std::map<std::string, struct sensor> SensorConfig = {};
 std::map<int64_t, PIDConf> ZoneConfig = {};
 std::map<int64_t, struct zone> ZoneDetailsConfig = {};

 constexpr const char *pidConfigurationInterface =
     "xyz.openbmc_project.Configuration.Pid";
 constexpr const char *objectManagerInterface =
     "org.freedesktop.DBus.ObjectManager";
 constexpr const char *pidZoneConfigurationInterface =
     "xyz.openbmc_project.Configuration.Pid.Zone";
 constexpr const char *sensorInterface = "xyz.openbmc_project.Sensor.Value";
 constexpr const char *pwmInterface = "xyz.openbmc_project.Control.FanPwm";

 namespace dbus_configuration
 {

 bool findSensor(const std::unordered_map<std::string, std::string> &sensors,
                 const std::string &search,
                 std::pair<std::string, std::string> &sensor)
 {
     for (const auto &s : sensors)
     {
         if (s.first.find(search) != std::string::npos)
         {
             sensor = s;
             return true;
         }
     }
     return false;
 }

 // this function prints the configuration into a form similar to the cpp
 // generated code to help in verification, should be turned off during normal
 // use
 void debugPrint(void)
 {
     // print sensor config
     std::cout << "sensor config:\n";
     std::cout << "{\n";
     for (auto &pair : SensorConfig)
     {

         std::cout << "\t{" << pair.first << ",\n\t\t{";
         std::cout << pair.second.type << ", ";
         std::cout << pair.second.readpath << ", ";
         std::cout << pair.second.writepath << ", ";
         std::cout << pair.second.min << ", ";
         std::cout << pair.second.max << ", ";
         std::cout << pair.second.timeout << "},\n\t},\n";
     }
     std::cout << "}\n\n";
     std::cout << "ZoneDetailsConfig\n";
     std::cout << "{\n";
     for (auto &zone : ZoneDetailsConfig)
     {
         std::cout << "\t{" << zone.first << ",\n";
         std::cout << "\t\t{" << zone.second.minthermalrpm << ", ";
         std::cout << zone.second.failsafepercent << "}\n\t},\n";
     }
     std::cout << "}\n\n";
     std::cout << "ZoneConfig\n";
     std::cout << "{\n";
     for (auto &zone : ZoneConfig)
     {
         std::cout << "\t{" << zone.first << "\n";
         for (auto &pidconf : zone.second)
         {
             std::cout << "\t\t{" << pidconf.first << ",\n";
             std::cout << "\t\t\t{" << pidconf.second.type << ",\n";
             std::cout << "\t\t\t{";
             for (auto &input : pidconf.second.inputs)
             {
                 std::cout << "\n\t\t\t" << input << ",\n";
             }
             std::cout << "\t\t\t}\n";
             std::cout << "\t\t\t" << pidconf.second.setpoint << ",\n";
             std::cout << "\t\t\t{" << pidconf.second.info.ts << ",\n";
             std::cout << "\t\t\t" << pidconf.second.info.p_c << ",\n";
             std::cout << "\t\t\t" << pidconf.second.info.i_c << ",\n";
             std::cout << "\t\t\t" << pidconf.second.info.ff_off << ",\n";
             std::cout << "\t\t\t" << pidconf.second.info.ff_gain << ",\n";
             std::cout << "\t\t\t{" << pidconf.second.info.i_lim.min << ","
                       << pidconf.second.info.i_lim.max << "},\n";
             std::cout << "\t\t\t{" << pidconf.second.info.out_lim.min << ","
                       << pidconf.second.info.out_lim.max << "},\n";
             std::cout << "\t\t\t" << pidconf.second.info.slew_neg << ",\n";
             std::cout << "\t\t\t" << pidconf.second.info.slew_pos << ",\n";
             std::cout << "\t\t\t}\n\t\t}\n";
         }
         std::cout << "\t},\n";
     }
     std::cout << "}\n\n";
 }

 void init(sdbusplus::bus::bus &bus)
 {
     using ManagedObjectType = std::unordered_map<
         sdbusplus::message::object_path,
         std::unordered_map<
             std::string,
             std::unordered_map<std::string,
                                sdbusplus::message::variant<
                                    uint64_t, int64_t, double, std::string,
                                    std::vector<std::string>>>>>;

     // install watch for properties changed
     std::function<void(sdbusplus::message::message & message)> eventHandler =
         [](const sdbusplus::message::message &) {
             // do a brief sleep as we tend to get a bunch of these events at
             // once
             std::this_thread::sleep_for(std::chrono::seconds(5));
             std::cout << "New configuration detected, restarting\n.";
             std::exit(EXIT_SUCCESS); // service file should make us restart
         };

     static sdbusplus::bus::match::match match(
         bus,
         "type='signal',member='PropertiesChanged',arg0namespace='" +
             std::string(pidConfigurationInterface) + "'",
         eventHandler);

     auto mapper =
         bus.new_method_call("xyz.openbmc_project.ObjectMapper",
                             "/xyz/openbmc_project/object_mapper",
                             "xyz.openbmc_project.ObjectMapper", "GetSubTree");
     mapper.append("", 0,
                   std::array<const char *, 5>{objectManagerInterface,
                                               pidConfigurationInterface,
                                               pidZoneConfigurationInterface,
                                               sensorInterface, pwmInterface});
     auto resp = bus.call(mapper);
     if (resp.is_method_error())
     {
         throw std::runtime_error("ObjectMapper Call Failure");
     }
     std::unordered_map<
         std::string, std::unordered_map<std::string, std::vector<std::string>>>
         respData;

     resp.read(respData);
     if (respData.empty())
     {
         throw std::runtime_error("No configuration data available from Mapper");
     }
     // create a map of pair of <has pid configuration, ObjectManager path>
     std::unordered_map<std::string, std::pair<bool, std::string>> owners;
     // and a map of <path, interface> for sensors
     std::unordered_map<std::string, std::string> sensors;
     for (const auto &objectPair : respData)
     {
         for (const auto &ownerPair : objectPair.second)
         {
             auto &owner = owners[ownerPair.first];
             for (const std::string &interface : ownerPair.second)
             {

                 if (interface == objectManagerInterface)
                 {
                     owner.second = objectPair.first;
                 }
                 if (interface == pidConfigurationInterface ||
                     interface == pidZoneConfigurationInterface)
                 {
                     owner.first = true;
                 }
                 if (interface == sensorInterface || interface == pwmInterface)
                 {
                     // we're not interested in pwm sensors, just pwm control
                     if (interface == sensorInterface &&
                         objectPair.first.find("pwm") != std::string::npos)
                     {
                         continue;
                     }
                     sensors[objectPair.first] = interface;
                 }
             }
         }
     }
     ManagedObjectType configurations;
     for (const auto &owner : owners)
     {
         // skip if no pid configuration (means probably a sensor)
         if (!owner.second.first)
         {
             continue;
         }
         auto endpoint = bus.new_method_call(
             owner.first.c_str(), owner.second.second.c_str(),
             "org.freedesktop.DBus.ObjectManager", "GetManagedObjects");
         auto responce = bus.call(endpoint);
         if (responce.is_method_error())
         {
             throw std::runtime_error("Error getting managed objects from " +
                                      owner.first);
         }
         ManagedObjectType configuration;
         responce.read(configuration);
         for (auto &pathPair : configuration)
         {
             if (pathPair.second.find(pidConfigurationInterface) !=
                     pathPair.second.end() ||
                 pathPair.second.find(pidZoneConfigurationInterface) !=
                     pathPair.second.end())
             {
                 configurations.emplace(pathPair);
             }
         }
     }
     for (const auto &configuration : configurations)
     {
         auto findZone =
             configuration.second.find(pidZoneConfigurationInterface);
         if (findZone != configuration.second.end())
         {
             const auto &zone = findZone->second;
             auto &details =
                 ZoneDetailsConfig[sdbusplus::message::variant_ns::get<uint64_t>(
                     zone.at("Index"))];
             details.minthermalrpm = mapbox::util::apply_visitor(
                 VariantToFloatVisitor(), zone.at("MinThermalRpm"));
             details.failsafepercent = mapbox::util::apply_visitor(
                 VariantToFloatVisitor(), zone.at("FailSafePercent"));
         }
         auto findBase = configuration.second.find(pidConfigurationInterface);
         if (findBase == configuration.second.end())
         {
             continue;
         }
         // if the base configuration is found, these are required
         const auto &base = configuration.second.at(pidConfigurationInterface);
         const auto &iLim = configuration.second.at(pidConfigurationInterface +
                                                    std::string(".ILimit"));
         const auto &outLim = configuration.second.at(pidConfigurationInterface +
                                                      std::string(".OutLimit"));
         PIDConf &conf =
             ZoneConfig[sdbusplus::message::variant_ns::get<uint64_t>(
                 base.at("Index"))];
         struct controller_info &info =
             conf[sdbusplus::message::variant_ns::get<std::string>(
                 base.at("Name"))];
         info.type =
             sdbusplus::message::variant_ns::get<std::string>(base.at("Class"));
         // todo: auto generation yaml -> c script seems to discard this value
         // for fans, verify this is okay
         if (info.type == "fan")
         {
             info.setpoint = 0;
         }
         else
         {
             info.setpoint = mapbox::util::apply_visitor(VariantToFloatVisitor(),
                                                         base.at("SetPoint"));
         }
         info.info.ts = 1.0; // currently unused
         info.info.p_c = mapbox::util::apply_visitor(VariantToFloatVisitor(),
                                                     base.at("PCoefficient"));
         info.info.i_c = mapbox::util::apply_visitor(VariantToFloatVisitor(),
                                                     base.at("ICoefficient"));
         info.info.ff_off = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), base.at("FFOffCoefficient"));
         info.info.ff_gain = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), base.at("FFGainCoefficient"));
         auto value = mapbox::util::apply_visitor(VariantToFloatVisitor(),
                                                  iLim.at("Max"));
         info.info.i_lim.max = value;
         info.info.i_lim.min = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), iLim.at("Min"));
         info.info.out_lim.max = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), outLim.at("Max"));
         info.info.out_lim.min = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), outLim.at("Min"));
         info.info.slew_neg = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), base.at("SlewNeg"));
         info.info.slew_pos = mapbox::util::apply_visitor(
             VariantToFloatVisitor(), base.at("SlewPos"));

         std::pair<std::string, std::string> sensorPathIfacePair;
         std::vector<std::string> sensorNames =
             sdbusplus::message::variant_ns::get<std::vector<std::string>>(
                 base.at("Inputs"));

         for (const std::string &sensorName : sensorNames)
         {
             std::string name = sensorName;
             // replace spaces with underscores to be legal on dbus
             std::replace(name.begin(), name.end(), ' ', '_');

             if (!findSensor(sensors, name, sensorPathIfacePair))
             {
                 throw std::runtime_error(
                     "Could not map configuration to sensor " + name);
             }
             if (sensorPathIfacePair.second == sensorInterface)
             {
                 info.inputs.push_back(name);
                 auto &config = SensorConfig[name];
                 config.type = sdbusplus::message::variant_ns::get<std::string>(
                     base.at("Class"));
                 config.readpath = sensorPathIfacePair.first;
                 // todo: maybe un-hardcode this if we run into slower timeouts
                 // with sensors
                 if (config.type == "temp")
                 {
                     config.timeout = 500;
                 }
             }
             if (sensorPathIfacePair.second == pwmInterface)
             {
                 // copy so we can modify it
                 for (std::string otherSensor : sensorNames)
                 {
                     if (otherSensor == sensorName)
                     {
                         continue;
                     }
                     std::replace(otherSensor.begin(), otherSensor.end(), ' ',
                                  '_');
                     auto &config = SensorConfig[otherSensor];
                     config.writepath = sensorPathIfacePair.first;
                     // todo: un-hardcode this if there are fans with different
                     // ranges
                     config.max = 255;
                     config.min = 0;
                 }
             }
         }
     }
     if (DEBUG)
     {
         debugPrint();
     }
 }
 } // namespace dbus_configuration
	/*
	// Copyright (c) 2018 Intel Corporation
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.
	*/

	#include <chrono>
	#include <conf.hpp>
	#include <dbus/util.hpp>
	#include <functional>
	#include <iostream>
	#include <sdbusplus/bus.hpp>
	#include <sdbusplus/bus/match.hpp>
	#include <set>
	#include <thread>
	#include <unordered_map>

	static constexpr bool DEBUG = false; // enable to print found configuration

	std::map<std::string, struct sensor> SensorConfig = {};
	std::map<int64_t, PIDConf> ZoneConfig = {};
	std::map<int64_t, struct zone> ZoneDetailsConfig = {};

	constexpr const char *pidConfigurationInterface =
	"xyz.openbmc_project.Configuration.Pid";
	constexpr const char *objectManagerInterface =
	"org.freedesktop.DBus.ObjectManager";
	constexpr const char *pidZoneConfigurationInterface =
	"xyz.openbmc_project.Configuration.Pid.Zone";
	constexpr const char *sensorInterface = "xyz.openbmc_project.Sensor.Value";
	constexpr const char *pwmInterface = "xyz.openbmc_project.Control.FanPwm";

	namespace dbus_configuration
	{

	bool findSensor(const std::unordered_map<std::string, std::string> &sensors,
	const std::string &search,
	std::pair<std::string, std::string> &sensor)
	{
	for (const auto &s : sensors)
	{
	if (s.first.find(search) != std::string::npos)
	{
	sensor = s;
	return true;
	}
	}
	return false;
	}

	// this function prints the configuration into a form similar to the cpp
	// generated code to help in verification, should be turned off during normal
	// use
	void debugPrint(void)
	{
	// print sensor config
	std::cout << "sensor config:\n";
	std::cout << "{\n";
	for (auto &pair : SensorConfig)
	{

	std::cout << "\t{" << pair.first << ",\n\t\t{";
	std::cout << pair.second.type << ", ";
	std::cout << pair.second.readpath << ", ";
	std::cout << pair.second.writepath << ", ";
	std::cout << pair.second.min << ", ";
	std::cout << pair.second.max << ", ";
	std::cout << pair.second.timeout << "},\n\t},\n";
	}
	std::cout << "}\n\n";
	std::cout << "ZoneDetailsConfig\n";
	std::cout << "{\n";
	for (auto &zone : ZoneDetailsConfig)
	{
	std::cout << "\t{" << zone.first << ",\n";
	std::cout << "\t\t{" << zone.second.minthermalrpm << ", ";
	std::cout << zone.second.failsafepercent << "}\n\t},\n";
	}
	std::cout << "}\n\n";
	std::cout << "ZoneConfig\n";
	std::cout << "{\n";
	for (auto &zone : ZoneConfig)
	{
	std::cout << "\t{" << zone.first << "\n";
	for (auto &pidconf : zone.second)
	{
	std::cout << "\t\t{" << pidconf.first << ",\n";
	std::cout << "\t\t\t{" << pidconf.second.type << ",\n";
	std::cout << "\t\t\t{";
	for (auto &input : pidconf.second.inputs)
	{
	std::cout << "\n\t\t\t" << input << ",\n";
	}
	std::cout << "\t\t\t}\n";
	std::cout << "\t\t\t" << pidconf.second.setpoint << ",\n";
	std::cout << "\t\t\t{" << pidconf.second.info.ts << ",\n";
	std::cout << "\t\t\t" << pidconf.second.info.p_c << ",\n";
	std::cout << "\t\t\t" << pidconf.second.info.i_c << ",\n";
	std::cout << "\t\t\t" << pidconf.second.info.ff_off << ",\n";
	std::cout << "\t\t\t" << pidconf.second.info.ff_gain << ",\n";
	std::cout << "\t\t\t{" << pidconf.second.info.i_lim.min << ","
	<< pidconf.second.info.i_lim.max << "},\n";
	std::cout << "\t\t\t{" << pidconf.second.info.out_lim.min << ","
	<< pidconf.second.info.out_lim.max << "},\n";
	std::cout << "\t\t\t" << pidconf.second.info.slew_neg << ",\n";
	std::cout << "\t\t\t" << pidconf.second.info.slew_pos << ",\n";
	std::cout << "\t\t\t}\n\t\t}\n";
	}
	std::cout << "\t},\n";
	}
	std::cout << "}\n\n";
	}

	void init(sdbusplus::bus::bus &bus)
	{
	using ManagedObjectType = std::unordered_map<
	sdbusplus::message::object_path,
	std::unordered_map<
	std::string,
	std::unordered_map<std::string,
	sdbusplus::message::variant<
	uint64_t, int64_t, double, std::string,
	std::vector<std::string>>>>>;

	// install watch for properties changed
	std::function<void(sdbusplus::message::message & message)> eventHandler =
	[](const sdbusplus::message::message &) {
	// do a brief sleep as we tend to get a bunch of these events at
	// once
	std::this_thread::sleep_for(std::chrono::seconds(5));
	std::cout << "New configuration detected, restarting\n.";
	std::exit(EXIT_SUCCESS); // service file should make us restart
	};

	static sdbusplus::bus::match::match match(
	bus,
	"type='signal',member='PropertiesChanged',arg0namespace='" +
	std::string(pidConfigurationInterface) + "'",
	eventHandler);

	auto mapper =
	bus.new_method_call("xyz.openbmc_project.ObjectMapper",
	"/xyz/openbmc_project/object_mapper",
	"xyz.openbmc_project.ObjectMapper", "GetSubTree");
	mapper.append("", 0,
	std::array<const char *, 5>{objectManagerInterface,
	pidConfigurationInterface,
	pidZoneConfigurationInterface,
	sensorInterface, pwmInterface});
	auto resp = bus.call(mapper);
	if (resp.is_method_error())
	{
	throw std::runtime_error("ObjectMapper Call Failure");
	}
	std::unordered_map<
	std::string, std::unordered_map<std::string, std::vector<std::string>>>
	respData;

	resp.read(respData);
	if (respData.empty())
	{
	throw std::runtime_error("No configuration data available from Mapper");
	}
	// create a map of pair of <has pid configuration, ObjectManager path>
	std::unordered_map<std::string, std::pair<bool, std::string>> owners;
	// and a map of <path, interface> for sensors
	std::unordered_map<std::string, std::string> sensors;
	for (const auto &objectPair : respData)
	{
	for (const auto &ownerPair : objectPair.second)
	{
	auto &owner = owners[ownerPair.first];
	for (const std::string &interface : ownerPair.second)
	{

	if (interface == objectManagerInterface)
	{
	owner.second = objectPair.first;
	}
	if (interface == pidConfigurationInterface \|\|
	interface == pidZoneConfigurationInterface)
	{
	owner.first = true;
	}
	if (interface == sensorInterface \|\| interface == pwmInterface)
	{
	// we're not interested in pwm sensors, just pwm control
	if (interface == sensorInterface &&
	objectPair.first.find("pwm") != std::string::npos)
	{
	continue;
	}
	sensors[objectPair.first] = interface;
	}
	}
	}
	}
	ManagedObjectType configurations;
	for (const auto &owner : owners)
	{
	// skip if no pid configuration (means probably a sensor)
	if (!owner.second.first)
	{
	continue;
	}
	auto endpoint = bus.new_method_call(
	owner.first.c_str(), owner.second.second.c_str(),
	"org.freedesktop.DBus.ObjectManager", "GetManagedObjects");
	auto responce = bus.call(endpoint);
	if (responce.is_method_error())
	{
	throw std::runtime_error("Error getting managed objects from " +
	owner.first);
	}
	ManagedObjectType configuration;
	responce.read(configuration);
	for (auto &pathPair : configuration)
	{
	if (pathPair.second.find(pidConfigurationInterface) !=
	pathPair.second.end() \|\|
	pathPair.second.find(pidZoneConfigurationInterface) !=
	pathPair.second.end())
	{
	configurations.emplace(pathPair);
	}
	}
	}
	for (const auto &configuration : configurations)
	{
	auto findZone =
	configuration.second.find(pidZoneConfigurationInterface);
	if (findZone != configuration.second.end())
	{
	const auto &zone = findZone->second;
	auto &details =
	ZoneDetailsConfig[sdbusplus::message::variant_ns::get<uint64_t>(
	zone.at("Index"))];
	details.minthermalrpm = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), zone.at("MinThermalRpm"));
	details.failsafepercent = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), zone.at("FailSafePercent"));
	}
	auto findBase = configuration.second.find(pidConfigurationInterface);
	if (findBase == configuration.second.end())
	{
	continue;
	}
	// if the base configuration is found, these are required
	const auto &base = configuration.second.at(pidConfigurationInterface);
	const auto &iLim = configuration.second.at(pidConfigurationInterface +
	std::string(".ILimit"));
	const auto &outLim = configuration.second.at(pidConfigurationInterface +
	std::string(".OutLimit"));
	PIDConf &conf =
	ZoneConfig[sdbusplus::message::variant_ns::get<uint64_t>(
	base.at("Index"))];
	struct controller_info &info =
	conf[sdbusplus::message::variant_ns::get<std::string>(
	base.at("Name"))];
	info.type =
	sdbusplus::message::variant_ns::get<std::string>(base.at("Class"));
	// todo: auto generation yaml -> c script seems to discard this value
	// for fans, verify this is okay
	if (info.type == "fan")
	{
	info.setpoint = 0;
	}
	else
	{
	info.setpoint = mapbox::util::apply_visitor(VariantToFloatVisitor(),
	base.at("SetPoint"));
	}
	info.info.ts = 1.0; // currently unused
	info.info.p_c = mapbox::util::apply_visitor(VariantToFloatVisitor(),
	base.at("PCoefficient"));
	info.info.i_c = mapbox::util::apply_visitor(VariantToFloatVisitor(),
	base.at("ICoefficient"));
	info.info.ff_off = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), base.at("FFOffCoefficient"));
	info.info.ff_gain = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), base.at("FFGainCoefficient"));
	auto value = mapbox::util::apply_visitor(VariantToFloatVisitor(),
	iLim.at("Max"));
	info.info.i_lim.max = value;
	info.info.i_lim.min = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), iLim.at("Min"));
	info.info.out_lim.max = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), outLim.at("Max"));
	info.info.out_lim.min = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), outLim.at("Min"));
	info.info.slew_neg = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), base.at("SlewNeg"));
	info.info.slew_pos = mapbox::util::apply_visitor(
	VariantToFloatVisitor(), base.at("SlewPos"));

	std::pair<std::string, std::string> sensorPathIfacePair;
	std::vector<std::string> sensorNames =
	sdbusplus::message::variant_ns::get<std::vector<std::string>>(
	base.at("Inputs"));

	for (const std::string &sensorName : sensorNames)
	{
	std::string name = sensorName;
	// replace spaces with underscores to be legal on dbus
	std::replace(name.begin(), name.end(), ' ', '_');

	if (!findSensor(sensors, name, sensorPathIfacePair))
	{
	throw std::runtime_error(
	"Could not map configuration to sensor " + name);
	}
	if (sensorPathIfacePair.second == sensorInterface)
	{
	info.inputs.push_back(name);
	auto &config = SensorConfig[name];
	config.type = sdbusplus::message::variant_ns::get<std::string>(
	base.at("Class"));
	config.readpath = sensorPathIfacePair.first;
	// todo: maybe un-hardcode this if we run into slower timeouts
	// with sensors
	if (config.type == "temp")
	{
	config.timeout = 500;
	}
	}
	if (sensorPathIfacePair.second == pwmInterface)
	{
	// copy so we can modify it
	for (std::string otherSensor : sensorNames)
	{
	if (otherSensor == sensorName)
	{
	continue;
	}
	std::replace(otherSensor.begin(), otherSensor.end(), ' ',
	'_');
	auto &config = SensorConfig[otherSensor];
	config.writepath = sensorPathIfacePair.first;
	// todo: un-hardcode this if there are fans with different
	// ranges
	config.max = 255;
	config.min = 0;
	}
	}
	}
	}
	if (DEBUG)
	{
	debugPrint();
	}
	}
	} // namespace dbus_configuration