| /** |
| * Copyright 2017 Google Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "manualcmds.hpp" |
| |
| #include <ipmid/api.h> |
| |
| #include <ipmid/iana.hpp> |
| #include <ipmid/oemopenbmc.hpp> |
| #include <ipmid/oemrouter.hpp> |
| #include <map> |
| #include <sdbusplus/bus.hpp> |
| #include <sdbusplus/message.hpp> |
| #include <string> |
| #include <tuple> |
| #include <variant> |
| |
| namespace pid_control |
| { |
| namespace ipmi |
| { |
| |
| static constexpr auto objectPath = "/xyz/openbmc_project/settings/fanctrl/zone"; |
| static constexpr auto busName = "xyz.openbmc_project.State.FanCtrl"; |
| static constexpr auto intf = "xyz.openbmc_project.Control.Mode"; |
| static constexpr auto manualProperty = "Manual"; |
| static constexpr auto failsafeProperty = "FailSafe"; |
| static constexpr auto propertiesintf = "org.freedesktop.DBus.Properties"; |
| |
| using Property = std::string; |
| using Value = std::variant<bool>; |
| using PropertyMap = std::map<Property, Value>; |
| |
| /* The following was copied directly from my manual thread handler. */ |
| static std::string getControlPath(int8_t zone) |
| { |
| return std::string(objectPath) + std::to_string(zone); |
| } |
| |
| /* |
| * busctl call xyz.openbmc_project.State.FanCtrl \ |
| * /xyz/openbmc_project/settings/fanctrl/zone1 \ |
| * org.freedesktop.DBus.Properties \ |
| * GetAll \ |
| * s \ |
| * xyz.openbmc_project.Control.Mode |
| * a{sv} 2 "Manual" b false "FailSafe" b false |
| */ |
| |
| static ipmi_ret_t getFanCtrlProperty(uint8_t zoneId, bool* value, |
| const std::string& property) |
| { |
| std::string path = getControlPath(zoneId); |
| |
| auto propertyReadBus = sdbusplus::bus::new_system(); |
| auto pimMsg = propertyReadBus.new_method_call(busName, path.c_str(), |
| propertiesintf, "GetAll"); |
| pimMsg.append(intf); |
| |
| try |
| { |
| PropertyMap propMap; |
| |
| /* a method could error but the call not error. */ |
| auto valueResponseMsg = propertyReadBus.call(pimMsg); |
| |
| valueResponseMsg.read(propMap); |
| |
| *value = std::get<bool>(propMap[property]); |
| } |
| catch (const sdbusplus::exception::SdBusError& ex) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| return IPMI_CC_OK; |
| } |
| |
| static ipmi_ret_t getFailsafeModeState(const uint8_t* reqBuf, uint8_t* replyBuf, |
| size_t* dataLen) |
| { |
| bool current; |
| |
| if (*dataLen < sizeof(struct FanCtrlRequest)) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| const auto request = |
| reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]); |
| |
| ipmi_ret_t rc = |
| getFanCtrlProperty(request->zone, ¤t, failsafeProperty); |
| if (rc) |
| { |
| return rc; |
| } |
| |
| *replyBuf = (uint8_t)current; |
| *dataLen = sizeof(uint8_t); |
| return IPMI_CC_OK; |
| } |
| |
| /* |
| * <method name="GetAll"> |
| * <arg name="interface" direction="in" type="s"/> |
| * <arg name="properties" direction="out" type="a{sv}"/> |
| * </method> |
| */ |
| static ipmi_ret_t getManualModeState(const uint8_t* reqBuf, uint8_t* replyBuf, |
| size_t* dataLen) |
| { |
| bool current; |
| |
| if (*dataLen < sizeof(struct FanCtrlRequest)) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| const auto request = |
| reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]); |
| |
| ipmi_ret_t rc = getFanCtrlProperty(request->zone, ¤t, manualProperty); |
| if (rc) |
| { |
| return rc; |
| } |
| |
| *replyBuf = (uint8_t)current; |
| *dataLen = sizeof(uint8_t); |
| return IPMI_CC_OK; |
| } |
| |
| /* |
| * <method name="Set"> |
| * <arg name="interface" direction="in" type="s"/> |
| * <arg name="property" direction="in" type="s"/> |
| * <arg name="value" direction="in" type="v"/> |
| * </method> |
| */ |
| static ipmi_ret_t setManualModeState(const uint8_t* reqBuf, uint8_t* replyBuf, |
| size_t* dataLen) |
| { |
| if (*dataLen < sizeof(struct FanCtrlRequestSet)) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| using Value = std::variant<bool>; |
| |
| const auto request = |
| reinterpret_cast<const struct FanCtrlRequestSet*>(&reqBuf[0]); |
| |
| /* 0 is false, 1 is true */ |
| bool setValue = static_cast<bool>(request->value); |
| Value v{setValue}; |
| |
| auto PropertyWriteBus = sdbusplus::bus::new_system(); |
| |
| std::string path = getControlPath(request->zone); |
| |
| auto pimMsg = PropertyWriteBus.new_method_call(busName, path.c_str(), |
| propertiesintf, "Set"); |
| pimMsg.append(intf); |
| pimMsg.append(manualProperty); |
| pimMsg.append(v); |
| |
| ipmi_ret_t rc = IPMI_CC_OK; |
| |
| try |
| { |
| PropertyWriteBus.call_noreply(pimMsg); |
| } |
| catch (const sdbusplus::exception::SdBusError& ex) |
| { |
| rc = IPMI_CC_INVALID; |
| } |
| /* TODO(venture): Should sanity check the result. */ |
| |
| return rc; |
| } |
| |
| /* Three command packages: get, set true, set false */ |
| static ipmi_ret_t manualModeControl(ipmi_cmd_t cmd, const uint8_t* reqBuf, |
| uint8_t* replyCmdBuf, size_t* dataLen) |
| { |
| // FanCtrlRequest is the smaller of the requests, so it's at a minimum. |
| if (*dataLen < sizeof(struct FanCtrlRequest)) |
| { |
| return IPMI_CC_INVALID; |
| } |
| |
| const auto request = |
| reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]); |
| |
| ipmi_ret_t rc = IPMI_CC_OK; |
| |
| switch (request->command) |
| { |
| case GET_CONTROL_STATE: |
| return getManualModeState(reqBuf, replyCmdBuf, dataLen); |
| case SET_CONTROL_STATE: |
| return setManualModeState(reqBuf, replyCmdBuf, dataLen); |
| case GET_FAILSAFE_STATE: |
| return getFailsafeModeState(reqBuf, replyCmdBuf, dataLen); |
| default: |
| rc = IPMI_CC_INVALID; |
| } |
| |
| return rc; |
| } |
| |
| } // namespace ipmi |
| } // namespace pid_control |
| |
| void setupGlobalOemFanControl() __attribute__((constructor)); |
| |
| void setupGlobalOemFanControl() |
| { |
| oem::Router* router = oem::mutableRouter(); |
| |
| fprintf(stderr, |
| "Registering OEM:[%#08X], Cmd:[%#04X] for Manual Zone Control\n", |
| oem::obmcOemNumber, oem::Cmd::fanManualCmd); |
| |
| router->registerHandler(oem::obmcOemNumber, oem::Cmd::fanManualCmd, |
| pid_control::ipmi::manualModeControl); |
| } |