| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #include "dbusconfiguration.hpp" |
| |
| #include "conf.hpp" |
| #include "dbushelper.hpp" |
| #include "dbusutil.hpp" |
| #include "util.hpp" |
| |
| #include <boost/asio/steady_timer.hpp> |
| #include <sdbusplus/bus.hpp> |
| #include <sdbusplus/bus/match.hpp> |
| #include <sdbusplus/exception.hpp> |
| |
| #include <algorithm> |
| #include <chrono> |
| #include <functional> |
| #include <iostream> |
| #include <list> |
| #include <set> |
| #include <unordered_map> |
| #include <variant> |
| |
| namespace pid_control |
| { |
| |
| constexpr const char* pidConfigurationInterface = |
| "xyz.openbmc_project.Configuration.Pid"; |
| constexpr const char* objectManagerInterface = |
| "org.freedesktop.DBus.ObjectManager"; |
| constexpr const char* pidZoneConfigurationInterface = |
| "xyz.openbmc_project.Configuration.Pid.Zone"; |
| constexpr const char* stepwiseConfigurationInterface = |
| "xyz.openbmc_project.Configuration.Stepwise"; |
| constexpr const char* thermalControlIface = |
| "xyz.openbmc_project.Control.ThermalMode"; |
| constexpr const char* sensorInterface = "xyz.openbmc_project.Sensor.Value"; |
| constexpr const char* defaultPwmInterface = |
| "xyz.openbmc_project.Control.FanPwm"; |
| |
| using Association = std::tuple<std::string, std::string, std::string>; |
| using Associations = std::vector<Association>; |
| |
| namespace thresholds |
| { |
| constexpr const char* warningInterface = |
| "xyz.openbmc_project.Sensor.Threshold.Warning"; |
| constexpr const char* criticalInterface = |
| "xyz.openbmc_project.Sensor.Threshold.Critical"; |
| const std::array<const char*, 4> types = {"CriticalLow", "CriticalHigh", |
| "WarningLow", "WarningHigh"}; |
| |
| } // namespace thresholds |
| |
| namespace dbus_configuration |
| { |
| using SensorInterfaceType = std::pair<std::string, std::string>; |
| |
| inline std::string getSensorNameFromPath(const std::string& dbusPath) |
| { |
| return dbusPath.substr(dbusPath.find_last_of("/") + 1); |
| } |
| |
| inline std::string sensorNameToDbusName(const std::string& sensorName) |
| { |
| std::string retString = sensorName; |
| std::replace(retString.begin(), retString.end(), ' ', '_'); |
| return retString; |
| } |
| |
| std::vector<std::string> getSelectedProfiles(sdbusplus::bus::bus& bus) |
| { |
| std::vector<std::string> ret; |
| auto mapper = |
| bus.new_method_call("xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree"); |
| mapper.append("/", 0, std::array<const char*, 1>{thermalControlIface}); |
| std::unordered_map< |
| std::string, std::unordered_map<std::string, std::vector<std::string>>> |
| respData; |
| |
| try |
| { |
| auto resp = bus.call(mapper); |
| resp.read(respData); |
| } |
| catch (const sdbusplus::exception_t&) |
| { |
| // can't do anything without mapper call data |
| throw std::runtime_error("ObjectMapper Call Failure"); |
| } |
| if (respData.empty()) |
| { |
| // if the user has profiles but doesn't expose the interface to select |
| // one, just go ahead without using profiles |
| return ret; |
| } |
| |
| // assumption is that we should only have a small handful of selected |
| // profiles at a time (probably only 1), so calling each individually should |
| // not incur a large cost |
| for (const auto& objectPair : respData) |
| { |
| const std::string& path = objectPair.first; |
| for (const auto& ownerPair : objectPair.second) |
| { |
| const std::string& busName = ownerPair.first; |
| auto getProfile = |
| bus.new_method_call(busName.c_str(), path.c_str(), |
| "org.freedesktop.DBus.Properties", "Get"); |
| getProfile.append(thermalControlIface, "Current"); |
| std::variant<std::string> variantResp; |
| try |
| { |
| auto resp = bus.call(getProfile); |
| resp.read(variantResp); |
| } |
| catch (const sdbusplus::exception_t&) |
| { |
| throw std::runtime_error("Failure getting profile"); |
| } |
| std::string mode = std::get<std::string>(variantResp); |
| ret.emplace_back(std::move(mode)); |
| } |
| } |
| if constexpr (pid_control::conf::DEBUG) |
| { |
| std::cout << "Profiles selected: "; |
| for (const auto& profile : ret) |
| { |
| std::cout << profile << " "; |
| } |
| std::cout << "\n"; |
| } |
| return ret; |
| } |
| |
| int eventHandler(sd_bus_message* m, void* context, sd_bus_error*) |
| { |
| |
| if (context == nullptr || m == nullptr) |
| { |
| throw std::runtime_error("Invalid match"); |
| } |
| |
| // we skip associations because the mapper populates these, not the sensors |
| const std::array<const char*, 1> skipList = { |
| "xyz.openbmc_project.Association"}; |
| |
| sdbusplus::message::message message(m); |
| if (std::string(message.get_member()) == "InterfacesAdded") |
| { |
| sdbusplus::message::object_path path; |
| std::unordered_map< |
| std::string, |
| std::unordered_map<std::string, std::variant<Associations, bool>>> |
| data; |
| |
| message.read(path, data); |
| |
| for (const char* skip : skipList) |
| { |
| auto find = data.find(skip); |
| if (find != data.end()) |
| { |
| data.erase(find); |
| if (data.empty()) |
| { |
| return 1; |
| } |
| } |
| } |
| } |
| |
| boost::asio::steady_timer* timer = |
| static_cast<boost::asio::steady_timer*>(context); |
| |
| // do a brief sleep as we tend to get a bunch of these events at |
| // once |
| timer->expires_after(std::chrono::seconds(2)); |
| timer->async_wait([](const boost::system::error_code ec) { |
| if (ec == boost::asio::error::operation_aborted) |
| { |
| /* another timer started*/ |
| return; |
| } |
| |
| std::cout << "New configuration detected, reloading\n."; |
| tryRestartControlLoops(); |
| }); |
| |
| return 1; |
| } |
| |
| void createMatches(sdbusplus::bus::bus& bus, boost::asio::steady_timer& timer) |
| { |
| // this is a list because the matches can't be moved |
| static std::list<sdbusplus::bus::match::match> matches; |
| |
| const std::array<std::string, 4> interfaces = { |
| thermalControlIface, pidConfigurationInterface, |
| pidZoneConfigurationInterface, stepwiseConfigurationInterface}; |
| |
| // this list only needs to be created once |
| if (!matches.empty()) |
| { |
| return; |
| } |
| |
| // we restart when the configuration changes or there are new sensors |
| for (const auto& interface : interfaces) |
| { |
| matches.emplace_back( |
| bus, |
| "type='signal',member='PropertiesChanged',arg0namespace='" + |
| interface + "'", |
| eventHandler, &timer); |
| } |
| matches.emplace_back( |
| bus, |
| "type='signal',member='InterfacesAdded',arg0path='/xyz/openbmc_project/" |
| "sensors/'", |
| eventHandler, &timer); |
| } |
| |
| /** |
| * retrieve an attribute from the pid configuration map |
| * @param[in] base - the PID configuration map, keys are the attributes and |
| * value is the variant associated with that attribute. |
| * @param attributeName - the name of the attribute |
| * @return a variant holding the value associated with a key |
| * @throw runtime_error : attributeName is not in base |
| */ |
| inline DbusVariantType getPIDAttribute( |
| const std::unordered_map<std::string, DbusVariantType>& base, |
| const std::string& attributeName) |
| { |
| auto search = base.find(attributeName); |
| if (search == base.end()) |
| { |
| throw std::runtime_error("missing attribute " + attributeName); |
| } |
| return search->second; |
| } |
| |
| void populatePidInfo( |
| sdbusplus::bus::bus& bus, |
| const std::unordered_map<std::string, DbusVariantType>& base, |
| conf::ControllerInfo& info, const std::string* thresholdProperty, |
| const std::map<std::string, conf::SensorConfig>& sensorConfig) |
| { |
| info.type = std::get<std::string>(getPIDAttribute(base, "Class")); |
| if (info.type == "fan") |
| { |
| info.setpoint = 0; |
| } |
| else |
| { |
| info.setpoint = std::visit(VariantToDoubleVisitor(), |
| getPIDAttribute(base, "SetPoint")); |
| } |
| |
| if (thresholdProperty != nullptr) |
| { |
| std::string interface; |
| if (*thresholdProperty == "WarningHigh" || |
| *thresholdProperty == "WarningLow") |
| { |
| interface = thresholds::warningInterface; |
| } |
| else |
| { |
| interface = thresholds::criticalInterface; |
| } |
| const std::string& path = sensorConfig.at(info.inputs.front()).readPath; |
| |
| DbusHelper helper(sdbusplus::bus::new_system()); |
| std::string service = helper.getService(interface, path); |
| double reading = 0; |
| try |
| { |
| helper.getProperty(service, path, interface, *thresholdProperty, |
| reading); |
| } |
| catch (const sdbusplus::exception::exception& ex) |
| { |
| // unsupported threshold, leaving reading at 0 |
| } |
| |
| info.setpoint += reading; |
| } |
| |
| info.pidInfo.ts = 1.0; // currently unused |
| info.pidInfo.proportionalCoeff = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "PCoefficient")); |
| info.pidInfo.integralCoeff = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "ICoefficient")); |
| info.pidInfo.feedFwdOffset = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "FFOffCoefficient")); |
| info.pidInfo.feedFwdGain = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "FFGainCoefficient")); |
| info.pidInfo.integralLimit.max = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "ILimitMax")); |
| info.pidInfo.integralLimit.min = std::visit( |
| VariantToDoubleVisitor(), getPIDAttribute(base, "ILimitMin")); |
| info.pidInfo.outLim.max = std::visit(VariantToDoubleVisitor(), |
| getPIDAttribute(base, "OutLimitMax")); |
| info.pidInfo.outLim.min = std::visit(VariantToDoubleVisitor(), |
| getPIDAttribute(base, "OutLimitMin")); |
| info.pidInfo.slewNeg = |
| std::visit(VariantToDoubleVisitor(), getPIDAttribute(base, "SlewNeg")); |
| info.pidInfo.slewPos = |
| std::visit(VariantToDoubleVisitor(), getPIDAttribute(base, "SlewPos")); |
| double negativeHysteresis = 0; |
| double positiveHysteresis = 0; |
| |
| auto findNeg = base.find("NegativeHysteresis"); |
| auto findPos = base.find("PositiveHysteresis"); |
| |
| if (findNeg != base.end()) |
| { |
| negativeHysteresis = |
| std::visit(VariantToDoubleVisitor(), findNeg->second); |
| } |
| |
| if (findPos != base.end()) |
| { |
| positiveHysteresis = |
| std::visit(VariantToDoubleVisitor(), findPos->second); |
| } |
| info.pidInfo.negativeHysteresis = negativeHysteresis; |
| info.pidInfo.positiveHysteresis = positiveHysteresis; |
| } |
| |
| bool init(sdbusplus::bus::bus& bus, boost::asio::steady_timer& timer, |
| std::map<std::string, conf::SensorConfig>& sensorConfig, |
| std::map<int64_t, conf::PIDConf>& zoneConfig, |
| std::map<int64_t, conf::ZoneConfig>& zoneDetailsConfig) |
| { |
| |
| sensorConfig.clear(); |
| zoneConfig.clear(); |
| zoneDetailsConfig.clear(); |
| |
| createMatches(bus, timer); |
| |
| auto mapper = |
| bus.new_method_call("xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree"); |
| mapper.append("/", 0, |
| std::array<const char*, 6>{ |
| objectManagerInterface, pidConfigurationInterface, |
| pidZoneConfigurationInterface, |
| stepwiseConfigurationInterface, sensorInterface, |
| defaultPwmInterface}); |
| std::unordered_map< |
| std::string, std::unordered_map<std::string, std::vector<std::string>>> |
| respData; |
| try |
| { |
| auto resp = bus.call(mapper); |
| resp.read(respData); |
| } |
| catch (const sdbusplus::exception_t&) |
| { |
| // can't do anything without mapper call data |
| throw std::runtime_error("ObjectMapper Call Failure"); |
| } |
| |
| if (respData.empty()) |
| { |
| // can't do anything without mapper call data |
| throw std::runtime_error("No configuration data available from Mapper"); |
| } |
| // create a map of pair of <has pid configuration, ObjectManager path> |
| std::unordered_map<std::string, std::pair<bool, std::string>> owners; |
| // and a map of <path, interface> for sensors |
| std::unordered_map<std::string, std::string> sensors; |
| for (const auto& objectPair : respData) |
| { |
| for (const auto& ownerPair : objectPair.second) |
| { |
| auto& owner = owners[ownerPair.first]; |
| for (const std::string& interface : ownerPair.second) |
| { |
| |
| if (interface == objectManagerInterface) |
| { |
| owner.second = objectPair.first; |
| } |
| if (interface == pidConfigurationInterface || |
| interface == pidZoneConfigurationInterface || |
| interface == stepwiseConfigurationInterface) |
| { |
| owner.first = true; |
| } |
| if (interface == sensorInterface || |
| interface == defaultPwmInterface) |
| { |
| // we're not interested in pwm sensors, just pwm control |
| if (interface == sensorInterface && |
| objectPair.first.find("pwm") != std::string::npos) |
| { |
| continue; |
| } |
| sensors[objectPair.first] = interface; |
| } |
| } |
| } |
| } |
| ManagedObjectType configurations; |
| for (const auto& owner : owners) |
| { |
| // skip if no pid configuration (means probably a sensor) |
| if (!owner.second.first) |
| { |
| continue; |
| } |
| auto endpoint = bus.new_method_call( |
| owner.first.c_str(), owner.second.second.c_str(), |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| ManagedObjectType configuration; |
| try |
| { |
| auto responce = bus.call(endpoint); |
| responce.read(configuration); |
| } |
| catch (const sdbusplus::exception_t&) |
| { |
| // this shouldn't happen, probably means daemon crashed |
| throw std::runtime_error("Error getting managed objects from " + |
| owner.first); |
| } |
| |
| for (auto& pathPair : configuration) |
| { |
| if (pathPair.second.find(pidConfigurationInterface) != |
| pathPair.second.end() || |
| pathPair.second.find(pidZoneConfigurationInterface) != |
| pathPair.second.end() || |
| pathPair.second.find(stepwiseConfigurationInterface) != |
| pathPair.second.end()) |
| { |
| configurations.emplace(pathPair); |
| } |
| } |
| } |
| |
| // remove controllers from config that aren't in the current profile(s) |
| std::vector<std::string> selectedProfiles = getSelectedProfiles(bus); |
| if (selectedProfiles.size()) |
| { |
| for (auto pathIt = configurations.begin(); |
| pathIt != configurations.end();) |
| { |
| for (auto confIt = pathIt->second.begin(); |
| confIt != pathIt->second.end();) |
| { |
| auto profilesFind = confIt->second.find("Profiles"); |
| if (profilesFind == confIt->second.end()) |
| { |
| confIt++; |
| continue; // if no profiles selected, apply always |
| } |
| auto profiles = |
| std::get<std::vector<std::string>>(profilesFind->second); |
| if (profiles.empty()) |
| { |
| confIt++; |
| continue; |
| } |
| |
| bool found = false; |
| for (const std::string& profile : profiles) |
| { |
| if (std::find(selectedProfiles.begin(), |
| selectedProfiles.end(), |
| profile) != selectedProfiles.end()) |
| { |
| found = true; |
| break; |
| } |
| } |
| if (found) |
| { |
| confIt++; |
| } |
| else |
| { |
| confIt = pathIt->second.erase(confIt); |
| } |
| } |
| if (pathIt->second.empty()) |
| { |
| pathIt = configurations.erase(pathIt); |
| } |
| else |
| { |
| pathIt++; |
| } |
| } |
| } |
| |
| // On D-Bus, although not necessary, |
| // having the "zoneID" field can still be useful, |
| // as it is used for diagnostic messages, |
| // logging file names, and so on. |
| // Accept optional "ZoneIndex" parameter to explicitly specify. |
| // If not present, or not unique, auto-assign index, |
| // using 0-based numbering, ensuring uniqueness. |
| std::map<std::string, int64_t> foundZones; |
| for (const auto& configuration : configurations) |
| { |
| auto findZone = |
| configuration.second.find(pidZoneConfigurationInterface); |
| if (findZone != configuration.second.end()) |
| { |
| const auto& zone = findZone->second; |
| |
| const std::string& name = std::get<std::string>(zone.at("Name")); |
| |
| auto findZoneIndex = zone.find("ZoneIndex"); |
| if (findZoneIndex == zone.end()) |
| { |
| continue; |
| } |
| |
| auto ptrZoneIndex = std::get_if<double>(&(findZoneIndex->second)); |
| if (!ptrZoneIndex) |
| { |
| continue; |
| } |
| |
| auto desiredIndex = static_cast<int64_t>(*ptrZoneIndex); |
| auto grantedIndex = setZoneIndex(name, foundZones, desiredIndex); |
| std::cout << "Zone " << name << " is at ZoneIndex " << grantedIndex |
| << "\n"; |
| } |
| } |
| |
| for (const auto& configuration : configurations) |
| { |
| auto findZone = |
| configuration.second.find(pidZoneConfigurationInterface); |
| if (findZone != configuration.second.end()) |
| { |
| const auto& zone = findZone->second; |
| |
| const std::string& name = std::get<std::string>(zone.at("Name")); |
| |
| auto index = getZoneIndex(name, foundZones); |
| |
| auto& details = zoneDetailsConfig[index]; |
| |
| details.minThermalOutput = std::visit(VariantToDoubleVisitor(), |
| zone.at("MinThermalOutput")); |
| details.failsafePercent = std::visit(VariantToDoubleVisitor(), |
| zone.at("FailSafePercent")); |
| } |
| auto findBase = configuration.second.find(pidConfigurationInterface); |
| // loop through all the PID configurations and fill out a sensor config |
| if (findBase != configuration.second.end()) |
| { |
| const auto& base = |
| configuration.second.at(pidConfigurationInterface); |
| const std::string pidName = std::get<std::string>(base.at("Name")); |
| const std::string pidClass = |
| std::get<std::string>(base.at("Class")); |
| const std::vector<std::string>& zones = |
| std::get<std::vector<std::string>>(base.at("Zones")); |
| for (const std::string& zone : zones) |
| { |
| auto index = getZoneIndex(zone, foundZones); |
| |
| conf::PIDConf& conf = zoneConfig[index]; |
| std::vector<std::string> inputSensorNames( |
| std::get<std::vector<std::string>>(base.at("Inputs"))); |
| std::vector<std::string> outputSensorNames; |
| |
| // assumption: all fan pids must have at least one output |
| if (pidClass == "fan") |
| { |
| outputSensorNames = std::get<std::vector<std::string>>( |
| getPIDAttribute(base, "Outputs")); |
| } |
| |
| bool unavailableAsFailed = true; |
| auto findUnavailableAsFailed = |
| base.find("InputUnavailableAsFailed"); |
| if (findUnavailableAsFailed != base.end()) |
| { |
| unavailableAsFailed = |
| std::get<bool>(findUnavailableAsFailed->second); |
| } |
| |
| std::vector<SensorInterfaceType> inputSensorInterfaces; |
| std::vector<SensorInterfaceType> outputSensorInterfaces; |
| /* populate an interface list for different sensor direction |
| * types (input,output) |
| */ |
| /* take the Inputs from the configuration and generate |
| * a list of dbus descriptors (path, interface). |
| * Mapping can be many-to-one since an element of Inputs can be |
| * a regex |
| */ |
| for (const std::string& sensorName : inputSensorNames) |
| { |
| findSensors(sensors, sensorNameToDbusName(sensorName), |
| inputSensorInterfaces); |
| } |
| for (const std::string& sensorName : outputSensorNames) |
| { |
| findSensors(sensors, sensorNameToDbusName(sensorName), |
| outputSensorInterfaces); |
| } |
| |
| inputSensorNames.clear(); |
| for (const SensorInterfaceType& inputSensorInterface : |
| inputSensorInterfaces) |
| { |
| const std::string& dbusInterface = |
| inputSensorInterface.second; |
| const std::string& inputSensorPath = |
| inputSensorInterface.first; |
| std::string inputSensorName = |
| getSensorNameFromPath(inputSensorPath); |
| auto& config = sensorConfig[inputSensorName]; |
| inputSensorNames.push_back(inputSensorName); |
| config.type = pidClass; |
| config.readPath = inputSensorInterface.first; |
| // todo: maybe un-hardcode this if we run into slower |
| // timeouts with sensors |
| if (config.type == "temp") |
| { |
| config.timeout = 0; |
| config.ignoreDbusMinMax = true; |
| config.unavailableAsFailed = unavailableAsFailed; |
| } |
| if (dbusInterface != sensorInterface) |
| { |
| /* all expected inputs in the configuration are expected |
| * to be sensor interfaces |
| */ |
| throw std::runtime_error( |
| "sensor at dbus path [" + inputSensorPath + |
| "] has an interface [" + dbusInterface + |
| "] that does not match the expected interface of " + |
| sensorInterface); |
| } |
| } |
| |
| /* fan pids need to pair up tach sensors with their pwm |
| * counterparts |
| */ |
| if (pidClass == "fan") |
| { |
| /* If a PID is a fan there should be either |
| * (1) one output(pwm) per input(tach) |
| * OR |
| * (2) one putput(pwm) for all inputs(tach) |
| * everything else indicates a bad configuration. |
| */ |
| bool singlePwm = false; |
| if (outputSensorInterfaces.size() == 1) |
| { |
| /* one pwm, set write paths for all fan sensors to it */ |
| singlePwm = true; |
| } |
| else if (inputSensorInterfaces.size() == |
| outputSensorInterfaces.size()) |
| { |
| /* one to one mapping, each fan sensor gets its own pwm |
| * control */ |
| singlePwm = false; |
| } |
| else |
| { |
| throw std::runtime_error( |
| "fan PID has invalid number of Outputs"); |
| } |
| std::string fanSensorName; |
| std::string pwmPath; |
| std::string pwmInterface; |
| if (singlePwm) |
| { |
| /* if just a single output(pwm) is provided then use |
| * that pwm control path for all the fan sensor write |
| * path configs |
| */ |
| pwmPath = outputSensorInterfaces.at(0).first; |
| pwmInterface = outputSensorInterfaces.at(0).second; |
| } |
| for (uint32_t idx = 0; idx < inputSensorInterfaces.size(); |
| idx++) |
| { |
| if (!singlePwm) |
| { |
| pwmPath = outputSensorInterfaces.at(idx).first; |
| pwmInterface = |
| outputSensorInterfaces.at(idx).second; |
| } |
| if (defaultPwmInterface != pwmInterface) |
| { |
| throw std::runtime_error( |
| "fan pwm control at dbus path [" + pwmPath + |
| "] has an interface [" + pwmInterface + |
| "] that does not match the expected interface " |
| "of " + |
| defaultPwmInterface); |
| } |
| const std::string& fanPath = |
| inputSensorInterfaces.at(idx).first; |
| fanSensorName = getSensorNameFromPath(fanPath); |
| auto& fanConfig = sensorConfig[fanSensorName]; |
| fanConfig.writePath = pwmPath; |
| // todo: un-hardcode this if there are fans with |
| // different ranges |
| fanConfig.max = 255; |
| fanConfig.min = 0; |
| } |
| } |
| // if the sensors aren't available in the current state, don't |
| // add them to the configuration. |
| if (inputSensorNames.empty()) |
| { |
| continue; |
| } |
| |
| std::string offsetType; |
| |
| // SetPointOffset is a threshold value to pull from the sensor |
| // to apply an offset. For upper thresholds this means the |
| // setpoint is usually negative. |
| auto findSetpointOffset = base.find("SetPointOffset"); |
| if (findSetpointOffset != base.end()) |
| { |
| offsetType = |
| std::get<std::string>(findSetpointOffset->second); |
| if (std::find(thresholds::types.begin(), |
| thresholds::types.end(), |
| offsetType) == thresholds::types.end()) |
| { |
| throw std::runtime_error("Unsupported type: " + |
| offsetType); |
| } |
| } |
| |
| if (offsetType.empty()) |
| { |
| conf::ControllerInfo& info = |
| conf[std::get<std::string>(base.at("Name"))]; |
| info.inputs = std::move(inputSensorNames); |
| populatePidInfo(bus, base, info, nullptr, sensorConfig); |
| } |
| else |
| { |
| // we have to split up the inputs, as in practice t-control |
| // values will differ, making setpoints differ |
| for (const std::string& input : inputSensorNames) |
| { |
| conf::ControllerInfo& info = conf[input]; |
| info.inputs.emplace_back(input); |
| populatePidInfo(bus, base, info, &offsetType, |
| sensorConfig); |
| } |
| } |
| } |
| } |
| auto findStepwise = |
| configuration.second.find(stepwiseConfigurationInterface); |
| if (findStepwise != configuration.second.end()) |
| { |
| const auto& base = findStepwise->second; |
| const std::vector<std::string>& zones = |
| std::get<std::vector<std::string>>(base.at("Zones")); |
| for (const std::string& zone : zones) |
| { |
| auto index = getZoneIndex(zone, foundZones); |
| |
| conf::PIDConf& conf = zoneConfig[index]; |
| |
| std::vector<std::string> inputs; |
| std::vector<std::string> sensorNames = |
| std::get<std::vector<std::string>>(base.at("Inputs")); |
| |
| bool unavailableAsFailed = true; |
| auto findUnavailableAsFailed = |
| base.find("InputUnavailableAsFailed"); |
| if (findUnavailableAsFailed != base.end()) |
| { |
| unavailableAsFailed = |
| std::get<bool>(findUnavailableAsFailed->second); |
| } |
| |
| bool sensorFound = false; |
| for (const std::string& sensorName : sensorNames) |
| { |
| std::vector<std::pair<std::string, std::string>> |
| sensorPathIfacePairs; |
| if (!findSensors(sensors, sensorNameToDbusName(sensorName), |
| sensorPathIfacePairs)) |
| { |
| break; |
| } |
| |
| for (const auto& sensorPathIfacePair : sensorPathIfacePairs) |
| { |
| size_t idx = |
| sensorPathIfacePair.first.find_last_of("/") + 1; |
| std::string shortName = |
| sensorPathIfacePair.first.substr(idx); |
| |
| inputs.push_back(shortName); |
| auto& config = sensorConfig[shortName]; |
| config.readPath = sensorPathIfacePair.first; |
| config.type = "temp"; |
| config.ignoreDbusMinMax = true; |
| config.unavailableAsFailed = unavailableAsFailed; |
| // todo: maybe un-hardcode this if we run into slower |
| // timeouts with sensors |
| |
| config.timeout = 0; |
| sensorFound = true; |
| } |
| } |
| if (!sensorFound) |
| { |
| continue; |
| } |
| conf::ControllerInfo& info = |
| conf[std::get<std::string>(base.at("Name"))]; |
| info.inputs = std::move(inputs); |
| |
| info.type = "stepwise"; |
| info.stepwiseInfo.ts = 1.0; // currently unused |
| info.stepwiseInfo.positiveHysteresis = 0.0; |
| info.stepwiseInfo.negativeHysteresis = 0.0; |
| std::string subtype = std::get<std::string>(base.at("Class")); |
| |
| info.stepwiseInfo.isCeiling = (subtype == "Ceiling"); |
| auto findPosHyst = base.find("PositiveHysteresis"); |
| auto findNegHyst = base.find("NegativeHysteresis"); |
| if (findPosHyst != base.end()) |
| { |
| info.stepwiseInfo.positiveHysteresis = std::visit( |
| VariantToDoubleVisitor(), findPosHyst->second); |
| } |
| if (findNegHyst != base.end()) |
| { |
| info.stepwiseInfo.negativeHysteresis = std::visit( |
| VariantToDoubleVisitor(), findNegHyst->second); |
| } |
| std::vector<double> readings = |
| std::get<std::vector<double>>(base.at("Reading")); |
| if (readings.size() > ec::maxStepwisePoints) |
| { |
| throw std::invalid_argument("Too many stepwise points."); |
| } |
| if (readings.empty()) |
| { |
| throw std::invalid_argument( |
| "Must have one stepwise point."); |
| } |
| std::copy(readings.begin(), readings.end(), |
| info.stepwiseInfo.reading); |
| if (readings.size() < ec::maxStepwisePoints) |
| { |
| info.stepwiseInfo.reading[readings.size()] = |
| std::numeric_limits<double>::quiet_NaN(); |
| } |
| std::vector<double> outputs = |
| std::get<std::vector<double>>(base.at("Output")); |
| if (readings.size() != outputs.size()) |
| { |
| throw std::invalid_argument( |
| "Outputs size must match readings"); |
| } |
| std::copy(outputs.begin(), outputs.end(), |
| info.stepwiseInfo.output); |
| if (outputs.size() < ec::maxStepwisePoints) |
| { |
| info.stepwiseInfo.output[outputs.size()] = |
| std::numeric_limits<double>::quiet_NaN(); |
| } |
| } |
| } |
| } |
| if constexpr (pid_control::conf::DEBUG) |
| { |
| debugPrint(sensorConfig, zoneConfig, zoneDetailsConfig); |
| } |
| if (zoneConfig.empty() || zoneDetailsConfig.empty()) |
| { |
| std::cerr |
| << "No fan zones, application pausing until new configuration\n"; |
| return false; |
| } |
| return true; |
| } |
| |
| } // namespace dbus_configuration |
| } // namespace pid_control |