dbus/dbuspassive.cpp - openbmc/phosphor-pid-control - Gitiles

 /**
  * Copyright 2017 Google Inc.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "dbuspassive.hpp"

 #include "dbushelper_interface.hpp"
 #include "dbuspassiveredundancy.hpp"
 #include "dbusutil.hpp"
 #include "util.hpp"

 #include <sdbusplus/bus.hpp>

 #include <chrono>
 #include <cmath>
 #include <memory>
 #include <mutex>
 #include <string>
 #include <variant>

 namespace pid_control
 {

 std::unique_ptr<ReadInterface> DbusPassive::createDbusPassive(
     sdbusplus::bus_t& bus, const std::string& type, const std::string& id,
     std::unique_ptr<DbusHelperInterface> helper, const conf::SensorConfig* info,
     const std::shared_ptr<DbusPassiveRedundancy>& redundancy)
 {
     if (helper == nullptr)
     {
         return nullptr;
     }
     if (!validType(type))
     {
         return nullptr;
     }

     /* Need to get the scale and initial value */
     /* service == busname */
     std::string path;
     if (info->readPath.empty())
     {
         path = getSensorPath(type, id);
     }
     else
     {
         path = info->readPath;
     }

     SensorProperties settings;
     bool failed;

     try
     {
         std::string service = helper->getService(sensorintf, path);

         helper->getProperties(service, path, &settings);
         failed = helper->thresholdsAsserted(service, path);
     }
     catch (const std::exception& e)
     {
         return nullptr;
     }

     /* if these values are zero, they're ignored. */
     if (info->ignoreDbusMinMax)
     {
         settings.min = 0;
         settings.max = 0;
     }

     settings.unavailableAsFailed = info->unavailableAsFailed;

     return std::make_unique<DbusPassive>(bus, type, id, std::move(helper),
                                          settings, failed, path, redundancy);
 }

 DbusPassive::DbusPassive(
     sdbusplus::bus_t& bus, const std::string& type, const std::string& id,
     std::unique_ptr<DbusHelperInterface> helper,
     const SensorProperties& settings, bool failed, const std::string& path,
     const std::shared_ptr<DbusPassiveRedundancy>& redundancy) :
     ReadInterface(),
     _signal(bus, getMatch(path).c_str(), dbusHandleSignal, this), _id(id),
     _helper(std::move(helper)), _failed(failed), path(path),
     redundancy(redundancy)

 {
     _scale = settings.scale;
     _min = settings.min * std::pow(10.0, _scale);
     _max = settings.max * std::pow(10.0, _scale);
     _available = settings.available;
     _unavailableAsFailed = settings.unavailableAsFailed;

     // Cache this type knowledge, to avoid repeated string comparison
     _typeMargin = (type == "margin");
     _typeFan = (type == "fan");

     // Force value to be stored, otherwise member would be uninitialized
     updateValue(settings.value, true);
 }

 ReadReturn DbusPassive::read(void)
 {
     std::lock_guard<std::mutex> guard(_lock);

     ReadReturn r = {_value, _updated};

     return r;
 }

 void DbusPassive::setValue(double value)
 {
     std::lock_guard<std::mutex> guard(_lock);

     _value = value;
     _updated = std::chrono::high_resolution_clock::now();
 }

 bool DbusPassive::getFailed(void) const
 {
     if (redundancy)
     {
         const std::set<std::string>& failures = redundancy->getFailed();
         if (failures.find(path) != failures.end())
         {
             return true;
         }
     }

     /*
      * Unavailable thermal sensors, who are not present or
      * power-state-not-matching, should not trigger the failSafe mode. For
      * example, when a system stays at a powered-off state, its CPU Temp
      * sensors will be unavailable, these unavailable sensors should not be
      * treated as failed and trigger failSafe.
      * This is important for systems whose Fans are always on.
      */
     if (!_typeFan && !_available && !_unavailableAsFailed)
     {
         return false;
     }

     // If a reading has came in,
     // but its value bad in some way (determined by sensor type),
     // indicate this sensor has failed,
     // until another value comes in that is no longer bad.
     // This is different from the overall _failed flag,
     // which is set and cleared by other causes.
     if (_badReading)
     {
         return true;
     }

     // If a reading has came in, and it is not a bad reading,
     // but it indicates there is no more thermal margin left,
     // that is bad, something is wrong with the PID loops,
     // they are not cooling the system, enable failsafe mode also.
     if (_marginHot)
     {
         return true;
     }

     return _failed || !_available || !_functional;
 }

 void DbusPassive::setFailed(bool value)
 {
     _failed = value;
 }

 void DbusPassive::setFunctional(bool value)
 {
     _functional = value;
 }

 void DbusPassive::setAvailable(bool value)
 {
     _available = value;
 }

 int64_t DbusPassive::getScale(void)
 {
     return _scale;
 }

 std::string DbusPassive::getID(void)
 {
     return _id;
 }

 double DbusPassive::getMax(void)
 {
     return _max;
 }

 double DbusPassive::getMin(void)
 {
     return _min;
 }

 void DbusPassive::updateValue(double value, bool force)
 {
     _badReading = false;

     // Do not let a NAN, or other floating-point oddity, be used to update
     // the value, as that indicates the sensor has no valid reading.
     if (!(std::isfinite(value)))
     {
         _badReading = true;

         // Do not continue with a bad reading, unless caller forcing
         if (!force)
         {
             return;
         }
     }

     value *= std::pow(10.0, _scale);

     auto unscaled = value;
     scaleSensorReading(_min, _max, value);

     if (_typeMargin)
     {
         _marginHot = false;

         // Unlike an absolute temperature sensor,
         // where 0 degrees C is a good reading,
         // a value received of 0 (or negative) margin is worrisome,
         // and should be flagged.
         // Either it indicates margin not calculated properly,
         // or somebody forgot to set the margin-zero setpoint,
         // or the system is really overheating that much.
         // This is a different condition from _failed
         // and _badReading, so it merits its own flag.
         // The sensor has not failed, the reading is good, but the zone
         // still needs to know that it should go to failsafe mode.
         if (unscaled <= 0.0)
         {
             _marginHot = true;
         }
     }

     setValue(value);
 }

 int handleSensorValue(sdbusplus::message_t& msg, DbusPassive* owner)
 {
     std::string msgSensor;
     std::map<std::string, std::variant<int64_t, double, bool>> msgData;

     msg.read(msgSensor, msgData);

     if (msgSensor == "xyz.openbmc_project.Sensor.Value")
     {
         auto valPropMap = msgData.find("Value");
         if (valPropMap != msgData.end())
         {
             double value =
                 std::visit(VariantToDoubleVisitor(), valPropMap->second);

             owner->updateValue(value, false);
         }
     }
     else if (msgSensor == "xyz.openbmc_project.Sensor.Threshold.Critical")
     {
         auto criticalAlarmLow = msgData.find("CriticalAlarmLow");
         auto criticalAlarmHigh = msgData.find("CriticalAlarmHigh");
         if (criticalAlarmHigh == msgData.end() &&
             criticalAlarmLow == msgData.end())
         {
             return 0;
         }

         bool asserted = false;
         if (criticalAlarmLow != msgData.end())
         {
             asserted = std::get<bool>(criticalAlarmLow->second);
         }

         // checking both as in theory you could de-assert one threshold and
         // assert the other at the same moment
         if (!asserted && criticalAlarmHigh != msgData.end())
         {
             asserted = std::get<bool>(criticalAlarmHigh->second);
         }
         owner->setFailed(asserted);
     }
     else if (msgSensor == "xyz.openbmc_project.State.Decorator.Availability")
     {
         auto available = msgData.find("Available");
         if (available == msgData.end())
         {
             return 0;
         }
         bool asserted = std::get<bool>(available->second);
         owner->setAvailable(asserted);
         if (!asserted)
         {
             // A thermal controller will continue its PID calculation and not
             // trigger a 'failsafe' when some inputs are unavailable.
             // So, forced to clear the value here to prevent a historical
             // value to participate in a latter PID calculation.
             owner->updateValue(std::numeric_limits<double>::quiet_NaN(), true);
         }
     }
     else if (msgSensor ==
              "xyz.openbmc_project.State.Decorator.OperationalStatus")
     {
         auto functional = msgData.find("Functional");
         if (functional == msgData.end())
         {
             return 0;
         }
         bool asserted = std::get<bool>(functional->second);
         owner->setFunctional(asserted);
     }

     return 0;
 }

 int dbusHandleSignal(sd_bus_message* msg, void* usrData,
                      [[maybe_unused]] sd_bus_error* err)
 {
     auto sdbpMsg = sdbusplus::message_t(msg);
     DbusPassive* obj = static_cast<DbusPassive*>(usrData);

     return handleSensorValue(sdbpMsg, obj);
 }

 } // namespace pid_control
	/**
	* Copyright 2017 Google Inc.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "dbuspassive.hpp"

	#include "dbushelper_interface.hpp"
	#include "dbuspassiveredundancy.hpp"
	#include "dbusutil.hpp"
	#include "util.hpp"

	#include <sdbusplus/bus.hpp>

	#include <chrono>
	#include <cmath>
	#include <memory>
	#include <mutex>
	#include <string>
	#include <variant>

	namespace pid_control
	{

	std::unique_ptr<ReadInterface> DbusPassive::createDbusPassive(
	sdbusplus::bus_t& bus, const std::string& type, const std::string& id,
	std::unique_ptr<DbusHelperInterface> helper, const conf::SensorConfig* info,
	const std::shared_ptr<DbusPassiveRedundancy>& redundancy)
	{
	if (helper == nullptr)
	{
	return nullptr;
	}
	if (!validType(type))
	{
	return nullptr;
	}

	/* Need to get the scale and initial value */
	/* service == busname */
	std::string path;
	if (info->readPath.empty())
	{
	path = getSensorPath(type, id);
	}
	else
	{
	path = info->readPath;
	}

	SensorProperties settings;
	bool failed;

	try
	{
	std::string service = helper->getService(sensorintf, path);

	helper->getProperties(service, path, &settings);
	failed = helper->thresholdsAsserted(service, path);
	}
	catch (const std::exception& e)
	{
	return nullptr;
	}

	/* if these values are zero, they're ignored. */
	if (info->ignoreDbusMinMax)
	{
	settings.min = 0;
	settings.max = 0;
	}

	settings.unavailableAsFailed = info->unavailableAsFailed;

	return std::make_unique<DbusPassive>(bus, type, id, std::move(helper),
	settings, failed, path, redundancy);
	}

	DbusPassive::DbusPassive(
	sdbusplus::bus_t& bus, const std::string& type, const std::string& id,
	std::unique_ptr<DbusHelperInterface> helper,
	const SensorProperties& settings, bool failed, const std::string& path,
	const std::shared_ptr<DbusPassiveRedundancy>& redundancy) :
	ReadInterface(),
	_signal(bus, getMatch(path).c_str(), dbusHandleSignal, this), _id(id),
	_helper(std::move(helper)), _failed(failed), path(path),
	redundancy(redundancy)

	{
	_scale = settings.scale;
	_min = settings.min * std::pow(10.0, _scale);
	_max = settings.max * std::pow(10.0, _scale);
	_available = settings.available;
	_unavailableAsFailed = settings.unavailableAsFailed;

	// Cache this type knowledge, to avoid repeated string comparison
	_typeMargin = (type == "margin");
	_typeFan = (type == "fan");

	// Force value to be stored, otherwise member would be uninitialized
	updateValue(settings.value, true);
	}

	ReadReturn DbusPassive::read(void)
	{
	std::lock_guard<std::mutex> guard(_lock);

	ReadReturn r = {_value, _updated};

	return r;
	}

	void DbusPassive::setValue(double value)
	{
	std::lock_guard<std::mutex> guard(_lock);

	_value = value;
	_updated = std::chrono::high_resolution_clock::now();
	}

	bool DbusPassive::getFailed(void) const
	{
	if (redundancy)
	{
	const std::set<std::string>& failures = redundancy->getFailed();
	if (failures.find(path) != failures.end())
	{
	return true;
	}
	}

	/*
	* Unavailable thermal sensors, who are not present or
	* power-state-not-matching, should not trigger the failSafe mode. For
	* example, when a system stays at a powered-off state, its CPU Temp
	* sensors will be unavailable, these unavailable sensors should not be
	* treated as failed and trigger failSafe.
	* This is important for systems whose Fans are always on.
	*/
	if (!_typeFan && !_available && !_unavailableAsFailed)
	{
	return false;
	}

	// If a reading has came in,
	// but its value bad in some way (determined by sensor type),
	// indicate this sensor has failed,
	// until another value comes in that is no longer bad.
	// This is different from the overall _failed flag,
	// which is set and cleared by other causes.
	if (_badReading)
	{
	return true;
	}

	// If a reading has came in, and it is not a bad reading,
	// but it indicates there is no more thermal margin left,
	// that is bad, something is wrong with the PID loops,
	// they are not cooling the system, enable failsafe mode also.
	if (_marginHot)
	{
	return true;
	}

	return _failed \|\| !_available \|\| !_functional;
	}

	void DbusPassive::setFailed(bool value)
	{
	_failed = value;
	}

	void DbusPassive::setFunctional(bool value)
	{
	_functional = value;
	}

	void DbusPassive::setAvailable(bool value)
	{
	_available = value;
	}

	int64_t DbusPassive::getScale(void)
	{
	return _scale;
	}

	std::string DbusPassive::getID(void)
	{
	return _id;
	}

	double DbusPassive::getMax(void)
	{
	return _max;
	}

	double DbusPassive::getMin(void)
	{
	return _min;
	}

	void DbusPassive::updateValue(double value, bool force)
	{
	_badReading = false;

	// Do not let a NAN, or other floating-point oddity, be used to update
	// the value, as that indicates the sensor has no valid reading.
	if (!(std::isfinite(value)))
	{
	_badReading = true;

	// Do not continue with a bad reading, unless caller forcing
	if (!force)
	{
	return;
	}
	}

	value *= std::pow(10.0, _scale);

	auto unscaled = value;
	scaleSensorReading(_min, _max, value);

	if (_typeMargin)
	{
	_marginHot = false;

	// Unlike an absolute temperature sensor,
	// where 0 degrees C is a good reading,
	// a value received of 0 (or negative) margin is worrisome,
	// and should be flagged.
	// Either it indicates margin not calculated properly,
	// or somebody forgot to set the margin-zero setpoint,
	// or the system is really overheating that much.
	// This is a different condition from _failed
	// and _badReading, so it merits its own flag.
	// The sensor has not failed, the reading is good, but the zone
	// still needs to know that it should go to failsafe mode.
	if (unscaled <= 0.0)
	{
	_marginHot = true;
	}
	}

	setValue(value);
	}

	int handleSensorValue(sdbusplus::message_t& msg, DbusPassive* owner)
	{
	std::string msgSensor;
	std::map<std::string, std::variant<int64_t, double, bool>> msgData;

	msg.read(msgSensor, msgData);

	if (msgSensor == "xyz.openbmc_project.Sensor.Value")
	{
	auto valPropMap = msgData.find("Value");
	if (valPropMap != msgData.end())
	{
	double value =
	std::visit(VariantToDoubleVisitor(), valPropMap->second);

	owner->updateValue(value, false);
	}
	}
	else if (msgSensor == "xyz.openbmc_project.Sensor.Threshold.Critical")
	{
	auto criticalAlarmLow = msgData.find("CriticalAlarmLow");
	auto criticalAlarmHigh = msgData.find("CriticalAlarmHigh");
	if (criticalAlarmHigh == msgData.end() &&
	criticalAlarmLow == msgData.end())
	{
	return 0;
	}

	bool asserted = false;
	if (criticalAlarmLow != msgData.end())
	{
	asserted = std::get<bool>(criticalAlarmLow->second);
	}

	// checking both as in theory you could de-assert one threshold and
	// assert the other at the same moment
	if (!asserted && criticalAlarmHigh != msgData.end())
	{
	asserted = std::get<bool>(criticalAlarmHigh->second);
	}
	owner->setFailed(asserted);
	}
	else if (msgSensor == "xyz.openbmc_project.State.Decorator.Availability")
	{
	auto available = msgData.find("Available");
	if (available == msgData.end())
	{
	return 0;
	}
	bool asserted = std::get<bool>(available->second);
	owner->setAvailable(asserted);
	if (!asserted)
	{
	// A thermal controller will continue its PID calculation and not
	// trigger a 'failsafe' when some inputs are unavailable.
	// So, forced to clear the value here to prevent a historical
	// value to participate in a latter PID calculation.
	owner->updateValue(std::numeric_limits<double>::quiet_NaN(), true);
	}
	}
	else if (msgSensor ==
	"xyz.openbmc_project.State.Decorator.OperationalStatus")
	{
	auto functional = msgData.find("Functional");
	if (functional == msgData.end())
	{
	return 0;
	}
	bool asserted = std::get<bool>(functional->second);
	owner->setFunctional(asserted);
	}

	return 0;
	}

	int dbusHandleSignal(sd_bus_message* msg, void* usrData,
	[[maybe_unused]] sd_bus_error* err)
	{
	auto sdbpMsg = sdbusplus::message_t(msg);
	DbusPassive* obj = static_cast<DbusPassive*>(usrData);

	return handleSensorValue(sdbpMsg, obj);
	}

	} // namespace pid_control